| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // rt1015.c -- RT1015 ALSA SoC audio amplifier driver |
| // |
| // Copyright 2019 Realtek Semiconductor Corp. |
| // |
| // Author: Jack Yu <jack.yu@realtek.com> |
| // |
| // |
| |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/fs.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/regmap.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/rt1015.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/soc.h> |
| #include <sound/tlv.h> |
| |
| #include "rl6231.h" |
| #include "rt1015.h" |
| |
| static const struct rt1015_platform_data i2s_default_platform_data = { |
| .power_up_delay_ms = 50, |
| }; |
| |
| static const struct reg_default rt1015_reg[] = { |
| { 0x0000, 0x0000 }, |
| { 0x0004, 0xa000 }, |
| { 0x0006, 0x0003 }, |
| { 0x000a, 0x081e }, |
| { 0x000c, 0x0006 }, |
| { 0x000e, 0x0000 }, |
| { 0x0010, 0x0000 }, |
| { 0x0012, 0x0000 }, |
| { 0x0014, 0x0000 }, |
| { 0x0016, 0x0000 }, |
| { 0x0018, 0x0000 }, |
| { 0x0020, 0x8000 }, |
| { 0x0022, 0x8043 }, |
| { 0x0076, 0x0000 }, |
| { 0x0078, 0x0000 }, |
| { 0x007a, 0x0002 }, |
| { 0x007c, 0x10ec }, |
| { 0x007d, 0x1015 }, |
| { 0x00f0, 0x5000 }, |
| { 0x00f2, 0x004c }, |
| { 0x00f3, 0xecfe }, |
| { 0x00f4, 0x0000 }, |
| { 0x00f6, 0x0400 }, |
| { 0x0100, 0x0028 }, |
| { 0x0102, 0xff02 }, |
| { 0x0104, 0xa213 }, |
| { 0x0106, 0x200c }, |
| { 0x010c, 0x0000 }, |
| { 0x010e, 0x0058 }, |
| { 0x0111, 0x0200 }, |
| { 0x0112, 0x0400 }, |
| { 0x0114, 0x0022 }, |
| { 0x0116, 0x0000 }, |
| { 0x0118, 0x0000 }, |
| { 0x011a, 0x0123 }, |
| { 0x011c, 0x4567 }, |
| { 0x0300, 0x203d }, |
| { 0x0302, 0x001e }, |
| { 0x0311, 0x0000 }, |
| { 0x0313, 0x6014 }, |
| { 0x0314, 0x00a2 }, |
| { 0x031a, 0x00a0 }, |
| { 0x031c, 0x001f }, |
| { 0x031d, 0xffff }, |
| { 0x031e, 0x0000 }, |
| { 0x031f, 0x0000 }, |
| { 0x0320, 0x0000 }, |
| { 0x0321, 0x0000 }, |
| { 0x0322, 0xd7df }, |
| { 0x0328, 0x10b2 }, |
| { 0x0329, 0x0175 }, |
| { 0x032a, 0x36ad }, |
| { 0x032b, 0x7e55 }, |
| { 0x032c, 0x0520 }, |
| { 0x032d, 0xaa00 }, |
| { 0x032e, 0x570e }, |
| { 0x0330, 0xe180 }, |
| { 0x0332, 0x0034 }, |
| { 0x0334, 0x0001 }, |
| { 0x0336, 0x0010 }, |
| { 0x0338, 0x0000 }, |
| { 0x04fa, 0x0030 }, |
| { 0x04fc, 0x35c8 }, |
| { 0x04fe, 0x0800 }, |
| { 0x0500, 0x0400 }, |
| { 0x0502, 0x1000 }, |
| { 0x0504, 0x0000 }, |
| { 0x0506, 0x04ff }, |
| { 0x0508, 0x0010 }, |
| { 0x050a, 0x001a }, |
| { 0x0519, 0x1c68 }, |
| { 0x051a, 0x0ccc }, |
| { 0x051b, 0x0666 }, |
| { 0x051d, 0x0000 }, |
| { 0x051f, 0x0000 }, |
| { 0x0536, 0x061c }, |
| { 0x0538, 0x0000 }, |
| { 0x053a, 0x0000 }, |
| { 0x053c, 0x0000 }, |
| { 0x053d, 0x0000 }, |
| { 0x053e, 0x0000 }, |
| { 0x053f, 0x0000 }, |
| { 0x0540, 0x0000 }, |
| { 0x0541, 0x0000 }, |
| { 0x0542, 0x0000 }, |
| { 0x0543, 0x0000 }, |
| { 0x0544, 0x0000 }, |
| { 0x0568, 0x0000 }, |
| { 0x056a, 0x0000 }, |
| { 0x1000, 0x0040 }, |
| { 0x1002, 0x5405 }, |
| { 0x1006, 0x5515 }, |
| { 0x1007, 0x05f7 }, |
| { 0x1009, 0x0b0a }, |
| { 0x100a, 0x00ef }, |
| { 0x100d, 0x0003 }, |
| { 0x1010, 0xa433 }, |
| { 0x1020, 0x0000 }, |
| { 0x1200, 0x5a01 }, |
| { 0x1202, 0x6524 }, |
| { 0x1204, 0x1f00 }, |
| { 0x1206, 0x0000 }, |
| { 0x1208, 0x0000 }, |
| { 0x120a, 0x0000 }, |
| { 0x120c, 0x0000 }, |
| { 0x120e, 0x0000 }, |
| { 0x1210, 0x0000 }, |
| { 0x1212, 0x0000 }, |
| { 0x1300, 0x10a1 }, |
| { 0x1302, 0x12ff }, |
| { 0x1304, 0x0400 }, |
| { 0x1305, 0x0844 }, |
| { 0x1306, 0x4611 }, |
| { 0x1308, 0x555e }, |
| { 0x130a, 0x0000 }, |
| { 0x130c, 0x2000 }, |
| { 0x130e, 0x0100 }, |
| { 0x130f, 0x0001 }, |
| { 0x1310, 0x0000 }, |
| { 0x1312, 0x0000 }, |
| { 0x1314, 0x0000 }, |
| { 0x1316, 0x0000 }, |
| { 0x1318, 0x0000 }, |
| { 0x131a, 0x0000 }, |
| { 0x1322, 0x0029 }, |
| { 0x1323, 0x4a52 }, |
| { 0x1324, 0x002c }, |
| { 0x1325, 0x0b02 }, |
| { 0x1326, 0x002d }, |
| { 0x1327, 0x6b5a }, |
| { 0x1328, 0x002e }, |
| { 0x1329, 0xcbb2 }, |
| { 0x132a, 0x0030 }, |
| { 0x132b, 0x2c0b }, |
| { 0x1330, 0x0031 }, |
| { 0x1331, 0x8c63 }, |
| { 0x1332, 0x0032 }, |
| { 0x1333, 0xecbb }, |
| { 0x1334, 0x0034 }, |
| { 0x1335, 0x4d13 }, |
| { 0x1336, 0x0037 }, |
| { 0x1337, 0x0dc3 }, |
| { 0x1338, 0x003d }, |
| { 0x1339, 0xef7b }, |
| { 0x133a, 0x0044 }, |
| { 0x133b, 0xd134 }, |
| { 0x133c, 0x0047 }, |
| { 0x133d, 0x91e4 }, |
| { 0x133e, 0x004d }, |
| { 0x133f, 0xc370 }, |
| { 0x1340, 0x0053 }, |
| { 0x1341, 0xf4fd }, |
| { 0x1342, 0x0060 }, |
| { 0x1343, 0x5816 }, |
| { 0x1344, 0x006c }, |
| { 0x1345, 0xbb2e }, |
| { 0x1346, 0x0072 }, |
| { 0x1347, 0xecbb }, |
| { 0x1348, 0x0076 }, |
| { 0x1349, 0x5d97 }, |
| }; |
| |
| static bool rt1015_volatile_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case RT1015_RESET: |
| case RT1015_CLK_DET: |
| case RT1015_SIL_DET: |
| case RT1015_VER_ID: |
| case RT1015_VENDOR_ID: |
| case RT1015_DEVICE_ID: |
| case RT1015_PRO_ALT: |
| case RT1015_MAN_I2C: |
| case RT1015_DAC3: |
| case RT1015_VBAT_TEST_OUT1: |
| case RT1015_VBAT_TEST_OUT2: |
| case RT1015_VBAT_PROT_ATT: |
| case RT1015_VBAT_DET_CODE: |
| case RT1015_SMART_BST_CTRL1: |
| case RT1015_SPK_DC_DETECT1: |
| case RT1015_SPK_DC_DETECT4: |
| case RT1015_SPK_DC_DETECT5: |
| case RT1015_DC_CALIB_CLSD1: |
| case RT1015_DC_CALIB_CLSD5: |
| case RT1015_DC_CALIB_CLSD6: |
| case RT1015_DC_CALIB_CLSD7: |
| case RT1015_DC_CALIB_CLSD8: |
| case RT1015_S_BST_TIMING_INTER1: |
| case RT1015_OSCK_STA: |
| case RT1015_MONO_DYNA_CTRL1: |
| case RT1015_MONO_DYNA_CTRL5: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| static bool rt1015_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case RT1015_RESET: |
| case RT1015_CLK2: |
| case RT1015_CLK3: |
| case RT1015_PLL1: |
| case RT1015_PLL2: |
| case RT1015_DUM_RW1: |
| case RT1015_DUM_RW2: |
| case RT1015_DUM_RW3: |
| case RT1015_DUM_RW4: |
| case RT1015_DUM_RW5: |
| case RT1015_DUM_RW6: |
| case RT1015_CLK_DET: |
| case RT1015_SIL_DET: |
| case RT1015_CUSTOMER_ID: |
| case RT1015_PCODE_FWVER: |
| case RT1015_VER_ID: |
| case RT1015_VENDOR_ID: |
| case RT1015_DEVICE_ID: |
| case RT1015_PAD_DRV1: |
| case RT1015_PAD_DRV2: |
| case RT1015_GAT_BOOST: |
| case RT1015_PRO_ALT: |
| case RT1015_OSCK_STA: |
| case RT1015_MAN_I2C: |
| case RT1015_DAC1: |
| case RT1015_DAC2: |
| case RT1015_DAC3: |
| case RT1015_ADC1: |
| case RT1015_ADC2: |
| case RT1015_TDM_MASTER: |
| case RT1015_TDM_TCON: |
| case RT1015_TDM1_1: |
| case RT1015_TDM1_2: |
| case RT1015_TDM1_3: |
| case RT1015_TDM1_4: |
| case RT1015_TDM1_5: |
| case RT1015_MIXER1: |
| case RT1015_MIXER2: |
| case RT1015_ANA_PROTECT1: |
| case RT1015_ANA_CTRL_SEQ1: |
| case RT1015_ANA_CTRL_SEQ2: |
| case RT1015_VBAT_DET_DEB: |
| case RT1015_VBAT_VOLT_DET1: |
| case RT1015_VBAT_VOLT_DET2: |
| case RT1015_VBAT_TEST_OUT1: |
| case RT1015_VBAT_TEST_OUT2: |
| case RT1015_VBAT_PROT_ATT: |
| case RT1015_VBAT_DET_CODE: |
| case RT1015_PWR1: |
| case RT1015_PWR4: |
| case RT1015_PWR5: |
| case RT1015_PWR6: |
| case RT1015_PWR7: |
| case RT1015_PWR8: |
| case RT1015_PWR9: |
| case RT1015_CLASSD_SEQ: |
| case RT1015_SMART_BST_CTRL1: |
| case RT1015_SMART_BST_CTRL2: |
| case RT1015_ANA_CTRL1: |
| case RT1015_ANA_CTRL2: |
| case RT1015_PWR_STATE_CTRL: |
| case RT1015_MONO_DYNA_CTRL: |
| case RT1015_MONO_DYNA_CTRL1: |
| case RT1015_MONO_DYNA_CTRL2: |
| case RT1015_MONO_DYNA_CTRL3: |
| case RT1015_MONO_DYNA_CTRL4: |
| case RT1015_MONO_DYNA_CTRL5: |
| case RT1015_SPK_VOL: |
| case RT1015_SHORT_DETTOP1: |
| case RT1015_SHORT_DETTOP2: |
| case RT1015_SPK_DC_DETECT1: |
| case RT1015_SPK_DC_DETECT2: |
| case RT1015_SPK_DC_DETECT3: |
| case RT1015_SPK_DC_DETECT4: |
| case RT1015_SPK_DC_DETECT5: |
| case RT1015_BAT_RPO_STEP1: |
| case RT1015_BAT_RPO_STEP2: |
| case RT1015_BAT_RPO_STEP3: |
| case RT1015_BAT_RPO_STEP4: |
| case RT1015_BAT_RPO_STEP5: |
| case RT1015_BAT_RPO_STEP6: |
| case RT1015_BAT_RPO_STEP7: |
| case RT1015_BAT_RPO_STEP8: |
| case RT1015_BAT_RPO_STEP9: |
| case RT1015_BAT_RPO_STEP10: |
| case RT1015_BAT_RPO_STEP11: |
| case RT1015_BAT_RPO_STEP12: |
| case RT1015_SPREAD_SPEC1: |
| case RT1015_SPREAD_SPEC2: |
| case RT1015_PAD_STATUS: |
| case RT1015_PADS_PULLING_CTRL1: |
| case RT1015_PADS_DRIVING: |
| case RT1015_SYS_RST1: |
| case RT1015_SYS_RST2: |
| case RT1015_SYS_GATING1: |
| case RT1015_TEST_MODE1: |
| case RT1015_TEST_MODE2: |
| case RT1015_TIMING_CTRL1: |
| case RT1015_PLL_INT: |
| case RT1015_TEST_OUT1: |
| case RT1015_DC_CALIB_CLSD1: |
| case RT1015_DC_CALIB_CLSD2: |
| case RT1015_DC_CALIB_CLSD3: |
| case RT1015_DC_CALIB_CLSD4: |
| case RT1015_DC_CALIB_CLSD5: |
| case RT1015_DC_CALIB_CLSD6: |
| case RT1015_DC_CALIB_CLSD7: |
| case RT1015_DC_CALIB_CLSD8: |
| case RT1015_DC_CALIB_CLSD9: |
| case RT1015_DC_CALIB_CLSD10: |
| case RT1015_CLSD_INTERNAL1: |
| case RT1015_CLSD_INTERNAL2: |
| case RT1015_CLSD_INTERNAL3: |
| case RT1015_CLSD_INTERNAL4: |
| case RT1015_CLSD_INTERNAL5: |
| case RT1015_CLSD_INTERNAL6: |
| case RT1015_CLSD_INTERNAL7: |
| case RT1015_CLSD_INTERNAL8: |
| case RT1015_CLSD_INTERNAL9: |
| case RT1015_CLSD_OCP_CTRL: |
| case RT1015_VREF_LV: |
| case RT1015_MBIAS1: |
| case RT1015_MBIAS2: |
| case RT1015_MBIAS3: |
| case RT1015_MBIAS4: |
| case RT1015_VREF_LV1: |
| case RT1015_S_BST_TIMING_INTER1: |
| case RT1015_S_BST_TIMING_INTER2: |
| case RT1015_S_BST_TIMING_INTER3: |
| case RT1015_S_BST_TIMING_INTER4: |
| case RT1015_S_BST_TIMING_INTER5: |
| case RT1015_S_BST_TIMING_INTER6: |
| case RT1015_S_BST_TIMING_INTER7: |
| case RT1015_S_BST_TIMING_INTER8: |
| case RT1015_S_BST_TIMING_INTER9: |
| case RT1015_S_BST_TIMING_INTER10: |
| case RT1015_S_BST_TIMING_INTER11: |
| case RT1015_S_BST_TIMING_INTER12: |
| case RT1015_S_BST_TIMING_INTER13: |
| case RT1015_S_BST_TIMING_INTER14: |
| case RT1015_S_BST_TIMING_INTER15: |
| case RT1015_S_BST_TIMING_INTER16: |
| case RT1015_S_BST_TIMING_INTER17: |
| case RT1015_S_BST_TIMING_INTER18: |
| case RT1015_S_BST_TIMING_INTER19: |
| case RT1015_S_BST_TIMING_INTER20: |
| case RT1015_S_BST_TIMING_INTER21: |
| case RT1015_S_BST_TIMING_INTER22: |
| case RT1015_S_BST_TIMING_INTER23: |
| case RT1015_S_BST_TIMING_INTER24: |
| case RT1015_S_BST_TIMING_INTER25: |
| case RT1015_S_BST_TIMING_INTER26: |
| case RT1015_S_BST_TIMING_INTER27: |
| case RT1015_S_BST_TIMING_INTER28: |
| case RT1015_S_BST_TIMING_INTER29: |
| case RT1015_S_BST_TIMING_INTER30: |
| case RT1015_S_BST_TIMING_INTER31: |
| case RT1015_S_BST_TIMING_INTER32: |
| case RT1015_S_BST_TIMING_INTER33: |
| case RT1015_S_BST_TIMING_INTER34: |
| case RT1015_S_BST_TIMING_INTER35: |
| case RT1015_S_BST_TIMING_INTER36: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -9525, 75, 0); |
| |
| static const char * const rt1015_din_source_select[] = { |
| "Left", |
| "Right", |
| "Left + Right average", |
| }; |
| |
| static SOC_ENUM_SINGLE_DECL(rt1015_mono_lr_sel, RT1015_PAD_DRV2, 4, |
| rt1015_din_source_select); |
| |
| static const char * const rt1015_boost_mode[] = { |
| "Bypass", "Adaptive", "Fixed Adaptive" |
| }; |
| |
| static SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0, |
| rt1015_boost_mode); |
| |
| static int rt1015_boost_mode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = |
| snd_soc_kcontrol_component(kcontrol); |
| struct rt1015_priv *rt1015 = |
| snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = rt1015->boost_mode; |
| |
| return 0; |
| } |
| |
| static int rt1015_boost_mode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = |
| snd_soc_kcontrol_component(kcontrol); |
| struct rt1015_priv *rt1015 = |
| snd_soc_component_get_drvdata(component); |
| int boost_mode = ucontrol->value.integer.value[0]; |
| |
| switch (boost_mode) { |
| case BYPASS: |
| snd_soc_component_update_bits(component, |
| RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | |
| RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, |
| RT1015_ABST_REG_MODE | RT1015_ABST_FIX_TGT_DIS | |
| RT1015_BYPASS_SWRREG_BYPASS); |
| break; |
| case ADAPTIVE: |
| snd_soc_component_update_bits(component, |
| RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | |
| RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, |
| RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_DIS | |
| RT1015_BYPASS_SWRREG_PASS); |
| break; |
| case FIXED_ADAPTIVE: |
| snd_soc_component_update_bits(component, |
| RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | |
| RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, |
| RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_EN | |
| RT1015_BYPASS_SWRREG_PASS); |
| break; |
| default: |
| dev_err(component->dev, "Unknown boost control.\n"); |
| return -EINVAL; |
| } |
| |
| rt1015->boost_mode = boost_mode; |
| |
| return 0; |
| } |
| |
| static int rt1015_bypass_boost_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = |
| snd_soc_kcontrol_component(kcontrol); |
| struct rt1015_priv *rt1015 = |
| snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = rt1015->bypass_boost; |
| |
| return 0; |
| } |
| |
| static void rt1015_calibrate(struct rt1015_priv *rt1015) |
| { |
| struct snd_soc_component *component = rt1015->component; |
| struct regmap *regmap = rt1015->regmap; |
| |
| snd_soc_dapm_mutex_lock(&component->dapm); |
| regcache_cache_bypass(regmap, true); |
| |
| regmap_write(regmap, RT1015_CLK_DET, 0x0000); |
| regmap_write(regmap, RT1015_PWR4, 0x00B2); |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x0009); |
| msleep(100); |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000A); |
| msleep(100); |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000C); |
| msleep(100); |
| regmap_write(regmap, RT1015_CLSD_INTERNAL8, 0x2028); |
| regmap_write(regmap, RT1015_CLSD_INTERNAL9, 0x0140); |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000D); |
| msleep(300); |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x0008); |
| regmap_write(regmap, RT1015_SYS_RST1, 0x05F5); |
| regmap_write(regmap, RT1015_CLK_DET, 0x8000); |
| |
| regcache_cache_bypass(regmap, false); |
| regcache_mark_dirty(regmap); |
| regcache_sync(regmap); |
| snd_soc_dapm_mutex_unlock(&component->dapm); |
| } |
| |
| static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = |
| snd_soc_kcontrol_component(kcontrol); |
| struct rt1015_priv *rt1015 = |
| snd_soc_component_get_drvdata(component); |
| |
| if (rt1015->dac_is_used) { |
| dev_err(component->dev, "DAC is being used!\n"); |
| return -EBUSY; |
| } |
| |
| rt1015->bypass_boost = ucontrol->value.integer.value[0]; |
| if (rt1015->bypass_boost == RT1015_Bypass_Boost && |
| !rt1015->cali_done) { |
| rt1015_calibrate(rt1015); |
| rt1015->cali_done = 1; |
| |
| regmap_write(rt1015->regmap, RT1015_MONO_DYNA_CTRL, 0x0010); |
| } |
| |
| return 0; |
| } |
| |
| static void rt1015_flush_work(struct work_struct *work) |
| { |
| struct rt1015_priv *rt1015 = container_of(work, struct rt1015_priv, |
| flush_work.work); |
| struct snd_soc_component *component = rt1015->component; |
| unsigned int val, i; |
| |
| for (i = 0; i < 200; ++i) { |
| usleep_range(1000, 1500); |
| dev_dbg(component->dev, "Flush DAC (retry:%u)\n", i); |
| regmap_read(rt1015->regmap, RT1015_CLK_DET, &val); |
| if (val & 0x800) |
| break; |
| } |
| |
| regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x0597); |
| regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x05f7); |
| regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x0028); |
| |
| if (val & 0x800) |
| dev_dbg(component->dev, "Flush DAC completed.\n"); |
| else |
| dev_warn(component->dev, "Fail to flush DAC data.\n"); |
| } |
| |
| static const char * const rt1015_dac_output_vol_select[] = { |
| "immediate", |
| "zero detection + immediate change", |
| "zero detection + inc/dec change", |
| "zero detection + soft inc/dec change", |
| }; |
| |
| static SOC_ENUM_SINGLE_DECL(rt1015_dac_vol_ctl_enum, |
| RT1015_DAC3, 2, rt1015_dac_output_vol_select); |
| |
| static const struct snd_kcontrol_new rt1015_snd_controls[] = { |
| SOC_SINGLE_TLV("DAC Playback Volume", RT1015_DAC1, RT1015_DAC_VOL_SFT, |
| 127, 0, dac_vol_tlv), |
| SOC_DOUBLE("DAC Playback Switch", RT1015_DAC3, |
| RT1015_DA_MUTE_SFT, RT1015_DVOL_MUTE_FLAG_SFT, 1, 1), |
| SOC_ENUM_EXT("Boost Mode", rt1015_boost_mode_enum, |
| rt1015_boost_mode_get, rt1015_boost_mode_put), |
| SOC_ENUM("Mono LR Select", rt1015_mono_lr_sel), |
| SOC_SINGLE_EXT("Bypass Boost", SND_SOC_NOPM, 0, 1, 0, |
| rt1015_bypass_boost_get, rt1015_bypass_boost_put), |
| |
| /* DAC Output Volume Control */ |
| SOC_ENUM("DAC Output Control", rt1015_dac_vol_ctl_enum), |
| }; |
| |
| static int rt1015_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, |
| struct snd_soc_dapm_widget *sink) |
| { |
| struct snd_soc_component *component = |
| snd_soc_dapm_to_component(source->dapm); |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| |
| if (rt1015->sysclk_src == RT1015_SCLK_S_PLL) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static int r1015_dac_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *component = |
| snd_soc_dapm_to_component(w->dapm); |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| rt1015->dac_is_used = 1; |
| if (rt1015->bypass_boost == RT1015_Enable_Boost) { |
| snd_soc_component_write(component, |
| RT1015_SYS_RST1, 0x05f7); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST2, 0x0b0a); |
| snd_soc_component_write(component, |
| RT1015_GAT_BOOST, 0xacfe); |
| snd_soc_component_write(component, |
| RT1015_PWR9, 0xaa00); |
| snd_soc_component_write(component, |
| RT1015_GAT_BOOST, 0xecfe); |
| } else { |
| snd_soc_component_write(component, |
| 0x032d, 0xaa60); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST1, 0x05f7); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST2, 0x0b0a); |
| snd_soc_component_write(component, |
| RT1015_PWR_STATE_CTRL, 0x008e); |
| } |
| break; |
| |
| case SND_SOC_DAPM_POST_PMU: |
| regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x00a8); |
| break; |
| |
| case SND_SOC_DAPM_POST_PMD: |
| if (rt1015->bypass_boost == RT1015_Enable_Boost) { |
| snd_soc_component_write(component, |
| RT1015_PWR9, 0xa800); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST1, 0x05f5); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST2, 0x0b9a); |
| } else { |
| snd_soc_component_write(component, |
| 0x032d, 0xaa60); |
| snd_soc_component_write(component, |
| RT1015_PWR_STATE_CTRL, 0x0088); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST1, 0x05f5); |
| snd_soc_component_write(component, |
| RT1015_SYS_RST2, 0x0b9a); |
| } |
| rt1015->dac_is_used = 0; |
| |
| cancel_delayed_work_sync(&rt1015->flush_work); |
| break; |
| |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *component = |
| snd_soc_dapm_to_component(w->dapm); |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| unsigned int ret, ret2; |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| ret = snd_soc_component_read(component, RT1015_CLK_DET); |
| ret2 = snd_soc_component_read(component, RT1015_SPK_DC_DETECT1); |
| if (!((ret >> 15) & 0x1)) { |
| snd_soc_component_update_bits(component, RT1015_CLK_DET, |
| RT1015_EN_BCLK_DET_MASK, RT1015_EN_BCLK_DET); |
| dev_dbg(component->dev, "BCLK Detection Enabled.\n"); |
| } |
| if (!((ret2 >> 12) & 0x1)) { |
| snd_soc_component_update_bits(component, RT1015_SPK_DC_DETECT1, |
| RT1015_EN_CLA_D_DC_DET_MASK, RT1015_EN_CLA_D_DC_DET); |
| dev_dbg(component->dev, "Class-D DC Detection Enabled.\n"); |
| } |
| break; |
| case SND_SOC_DAPM_POST_PMU: |
| if (rt1015->hw_config == RT1015_HW_28) |
| schedule_delayed_work(&rt1015->flush_work, msecs_to_jiffies(10)); |
| msleep(rt1015->pdata.power_up_delay_ms); |
| break; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = { |
| SND_SOC_DAPM_SUPPLY("PLL", RT1015_PWR1, RT1015_PWR_PLL_BIT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, |
| r1015_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | |
| SND_SOC_DAPM_POST_PMD), |
| SND_SOC_DAPM_OUT_DRV_E("Amp Drv", SND_SOC_NOPM, 0, 0, NULL, 0, |
| rt1015_amp_drv_event, SND_SOC_DAPM_PRE_PMU | |
| SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_OUTPUT("SPO"), |
| }; |
| |
| static const struct snd_soc_dapm_route rt1015_dapm_routes[] = { |
| { "DAC", NULL, "AIFRX" }, |
| { "DAC", NULL, "PLL", rt1015_is_sys_clk_from_pll}, |
| { "Amp Drv", NULL, "DAC" }, |
| { "SPO", NULL, "Amp Drv" }, |
| }; |
| |
| static int rt1015_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| int pre_div, bclk_ms, frame_size, lrck; |
| unsigned int val_len = 0; |
| |
| lrck = params_rate(params); |
| pre_div = rl6231_get_clk_info(rt1015->sysclk, lrck); |
| if (pre_div < 0) { |
| dev_err(component->dev, "Unsupported clock rate\n"); |
| return -EINVAL; |
| } |
| |
| frame_size = snd_soc_params_to_frame_size(params); |
| if (frame_size < 0) { |
| dev_err(component->dev, "Unsupported frame size: %d\n", |
| frame_size); |
| return -EINVAL; |
| } |
| |
| bclk_ms = frame_size > 32; |
| |
| dev_dbg(component->dev, "bclk_ms is %d and pre_div is %d for iis %d\n", |
| bclk_ms, pre_div, dai->id); |
| |
| dev_dbg(component->dev, "lrck is %dHz and pre_div is %d for iis %d\n", |
| lrck, pre_div, dai->id); |
| |
| switch (params_width(params)) { |
| case 16: |
| break; |
| case 20: |
| val_len = RT1015_I2S_DL_20; |
| break; |
| case 24: |
| val_len = RT1015_I2S_DL_24; |
| break; |
| case 8: |
| val_len = RT1015_I2S_DL_8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| snd_soc_component_update_bits(component, RT1015_TDM_MASTER, |
| RT1015_I2S_DL_MASK, val_len); |
| snd_soc_component_update_bits(component, RT1015_CLK2, |
| RT1015_FS_PD_MASK, pre_div << RT1015_FS_PD_SFT); |
| |
| return 0; |
| } |
| |
| static int rt1015_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_component *component = dai->component; |
| unsigned int reg_val = 0, reg_val2 = 0; |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| reg_val |= RT1015_TCON_TDM_MS_M; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| reg_val |= RT1015_TCON_TDM_MS_S; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| reg_val2 |= RT1015_TDM_INV_BCLK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| break; |
| |
| case SND_SOC_DAIFMT_LEFT_J: |
| reg_val |= RT1015_I2S_M_DF_LEFT; |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_A: |
| reg_val |= RT1015_I2S_M_DF_PCM_A; |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_B: |
| reg_val |= RT1015_I2S_M_DF_PCM_B; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| snd_soc_component_update_bits(component, RT1015_TDM_MASTER, |
| RT1015_TCON_TDM_MS_MASK | RT1015_I2S_M_DF_MASK, |
| reg_val); |
| snd_soc_component_update_bits(component, RT1015_TDM1_1, |
| RT1015_TDM_INV_BCLK_MASK, reg_val2); |
| |
| return 0; |
| } |
| |
| static int rt1015_set_component_sysclk(struct snd_soc_component *component, |
| int clk_id, int source, unsigned int freq, int dir) |
| { |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| unsigned int reg_val = 0; |
| |
| if (freq == rt1015->sysclk && clk_id == rt1015->sysclk_src) |
| return 0; |
| |
| switch (clk_id) { |
| case RT1015_SCLK_S_MCLK: |
| reg_val |= RT1015_CLK_SYS_PRE_SEL_MCLK; |
| break; |
| |
| case RT1015_SCLK_S_PLL: |
| reg_val |= RT1015_CLK_SYS_PRE_SEL_PLL; |
| break; |
| |
| default: |
| dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); |
| return -EINVAL; |
| } |
| |
| rt1015->sysclk = freq; |
| rt1015->sysclk_src = clk_id; |
| |
| dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n", |
| freq, clk_id); |
| |
| snd_soc_component_update_bits(component, RT1015_CLK2, |
| RT1015_CLK_SYS_PRE_SEL_MASK, reg_val); |
| |
| return 0; |
| } |
| |
| static int rt1015_set_component_pll(struct snd_soc_component *component, |
| int pll_id, int source, unsigned int freq_in, |
| unsigned int freq_out) |
| { |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| struct rl6231_pll_code pll_code; |
| int ret; |
| |
| if (!freq_in || !freq_out) { |
| dev_dbg(component->dev, "PLL disabled\n"); |
| |
| rt1015->pll_in = 0; |
| rt1015->pll_out = 0; |
| |
| return 0; |
| } |
| |
| if (source == rt1015->pll_src && freq_in == rt1015->pll_in && |
| freq_out == rt1015->pll_out) |
| return 0; |
| |
| switch (source) { |
| case RT1015_PLL_S_MCLK: |
| snd_soc_component_update_bits(component, RT1015_CLK2, |
| RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_PLL_SRC2); |
| break; |
| |
| case RT1015_PLL_S_BCLK: |
| snd_soc_component_update_bits(component, RT1015_CLK2, |
| RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_BCLK); |
| break; |
| |
| default: |
| dev_err(component->dev, "Unknown PLL Source %d\n", source); |
| return -EINVAL; |
| } |
| |
| ret = rl6231_pll_calc(freq_in, freq_out, &pll_code); |
| if (ret < 0) { |
| dev_err(component->dev, "Unsupport input clock %d\n", freq_in); |
| return ret; |
| } |
| |
| dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", |
| pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), |
| pll_code.n_code, pll_code.k_code); |
| |
| snd_soc_component_write(component, RT1015_PLL1, |
| (pll_code.m_bp ? 0 : pll_code.m_code) << RT1015_PLL_M_SFT | |
| pll_code.m_bp << RT1015_PLL_M_BP_SFT | pll_code.n_code); |
| snd_soc_component_write(component, RT1015_PLL2, |
| pll_code.k_code); |
| |
| rt1015->pll_in = freq_in; |
| rt1015->pll_out = freq_out; |
| rt1015->pll_src = source; |
| |
| return 0; |
| } |
| |
| static int rt1015_set_tdm_slot(struct snd_soc_dai *dai, |
| unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) |
| { |
| struct snd_soc_component *component = dai->component; |
| unsigned int val = 0, rx_slotnum, tx_slotnum; |
| int ret = 0, first_bit; |
| |
| switch (slots) { |
| case 2: |
| val |= RT1015_I2S_TX_2CH; |
| break; |
| case 4: |
| val |= RT1015_I2S_TX_4CH; |
| break; |
| case 6: |
| val |= RT1015_I2S_TX_6CH; |
| break; |
| case 8: |
| val |= RT1015_I2S_TX_8CH; |
| break; |
| default: |
| ret = -EINVAL; |
| goto _set_tdm_err_; |
| } |
| |
| switch (slot_width) { |
| case 16: |
| val |= RT1015_I2S_CH_TX_LEN_16B; |
| break; |
| case 20: |
| val |= RT1015_I2S_CH_TX_LEN_20B; |
| break; |
| case 24: |
| val |= RT1015_I2S_CH_TX_LEN_24B; |
| break; |
| case 32: |
| val |= RT1015_I2S_CH_TX_LEN_32B; |
| break; |
| default: |
| ret = -EINVAL; |
| goto _set_tdm_err_; |
| } |
| |
| /* Rx slot configuration */ |
| rx_slotnum = hweight_long(rx_mask); |
| if (rx_slotnum != 1) { |
| ret = -EINVAL; |
| dev_err(component->dev, "too many rx slots or zero slot\n"); |
| goto _set_tdm_err_; |
| } |
| |
| /* This is an assumption that the system sends stereo audio to the amplifier typically. |
| * And the stereo audio is placed in slot 0/2/4/6 as the starting slot. |
| * The users could select the channel from L/R/L+R by "Mono LR Select" control. |
| */ |
| first_bit = __ffs(rx_mask); |
| switch (first_bit) { |
| case 0: |
| case 2: |
| case 4: |
| case 6: |
| snd_soc_component_update_bits(component, |
| RT1015_TDM1_4, |
| RT1015_TDM_I2S_TX_L_DAC1_1_MASK | |
| RT1015_TDM_I2S_TX_R_DAC1_1_MASK, |
| (first_bit << RT1015_TDM_I2S_TX_L_DAC1_1_SFT) | |
| ((first_bit+1) << RT1015_TDM_I2S_TX_R_DAC1_1_SFT)); |
| break; |
| case 1: |
| case 3: |
| case 5: |
| case 7: |
| snd_soc_component_update_bits(component, |
| RT1015_TDM1_4, |
| RT1015_TDM_I2S_TX_L_DAC1_1_MASK | |
| RT1015_TDM_I2S_TX_R_DAC1_1_MASK, |
| ((first_bit-1) << RT1015_TDM_I2S_TX_L_DAC1_1_SFT) | |
| (first_bit << RT1015_TDM_I2S_TX_R_DAC1_1_SFT)); |
| break; |
| default: |
| ret = -EINVAL; |
| goto _set_tdm_err_; |
| } |
| |
| /* Tx slot configuration */ |
| tx_slotnum = hweight_long(tx_mask); |
| if (tx_slotnum) { |
| ret = -EINVAL; |
| dev_err(component->dev, "doesn't need to support tx slots\n"); |
| goto _set_tdm_err_; |
| } |
| |
| snd_soc_component_update_bits(component, RT1015_TDM1_1, |
| RT1015_I2S_CH_TX_MASK | RT1015_I2S_CH_RX_MASK | |
| RT1015_I2S_CH_TX_LEN_MASK | RT1015_I2S_CH_RX_LEN_MASK, val); |
| |
| _set_tdm_err_: |
| return ret; |
| } |
| |
| static int rt1015_probe(struct snd_soc_component *component) |
| { |
| struct rt1015_priv *rt1015 = |
| snd_soc_component_get_drvdata(component); |
| |
| rt1015->component = component; |
| INIT_DELAYED_WORK(&rt1015->flush_work, rt1015_flush_work); |
| |
| return 0; |
| } |
| |
| static void rt1015_remove(struct snd_soc_component *component) |
| { |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| |
| cancel_delayed_work_sync(&rt1015->flush_work); |
| regmap_write(rt1015->regmap, RT1015_RESET, 0); |
| } |
| |
| #define RT1015_STEREO_RATES SNDRV_PCM_RATE_8000_192000 |
| #define RT1015_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) |
| |
| static struct snd_soc_dai_ops rt1015_aif_dai_ops = { |
| .hw_params = rt1015_hw_params, |
| .set_fmt = rt1015_set_dai_fmt, |
| .set_tdm_slot = rt1015_set_tdm_slot, |
| }; |
| |
| static struct snd_soc_dai_driver rt1015_dai[] = { |
| { |
| .name = "rt1015-aif", |
| .id = 0, |
| .playback = { |
| .stream_name = "AIF Playback", |
| .channels_min = 1, |
| .channels_max = 4, |
| .rates = RT1015_STEREO_RATES, |
| .formats = RT1015_FORMATS, |
| }, |
| .ops = &rt1015_aif_dai_ops, |
| } |
| }; |
| |
| #ifdef CONFIG_PM |
| static int rt1015_suspend(struct snd_soc_component *component) |
| { |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| |
| regcache_cache_only(rt1015->regmap, true); |
| regcache_mark_dirty(rt1015->regmap); |
| |
| return 0; |
| } |
| |
| static int rt1015_resume(struct snd_soc_component *component) |
| { |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); |
| |
| regcache_cache_only(rt1015->regmap, false); |
| regcache_sync(rt1015->regmap); |
| |
| if (rt1015->cali_done) |
| rt1015_calibrate(rt1015); |
| |
| return 0; |
| } |
| #else |
| #define rt1015_suspend NULL |
| #define rt1015_resume NULL |
| #endif |
| |
| static const struct snd_soc_component_driver soc_component_dev_rt1015 = { |
| .probe = rt1015_probe, |
| .remove = rt1015_remove, |
| .suspend = rt1015_suspend, |
| .resume = rt1015_resume, |
| .controls = rt1015_snd_controls, |
| .num_controls = ARRAY_SIZE(rt1015_snd_controls), |
| .dapm_widgets = rt1015_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(rt1015_dapm_widgets), |
| .dapm_routes = rt1015_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(rt1015_dapm_routes), |
| .set_sysclk = rt1015_set_component_sysclk, |
| .set_pll = rt1015_set_component_pll, |
| .use_pmdown_time = 1, |
| .endianness = 1, |
| .non_legacy_dai_naming = 1, |
| }; |
| |
| static const struct regmap_config rt1015_regmap = { |
| .reg_bits = 16, |
| .val_bits = 16, |
| .max_register = RT1015_S_BST_TIMING_INTER36, |
| .volatile_reg = rt1015_volatile_register, |
| .readable_reg = rt1015_readable_register, |
| .cache_type = REGCACHE_RBTREE, |
| .reg_defaults = rt1015_reg, |
| .num_reg_defaults = ARRAY_SIZE(rt1015_reg), |
| }; |
| |
| static const struct i2c_device_id rt1015_i2c_id[] = { |
| { "rt1015", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, rt1015_i2c_id); |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id rt1015_of_match[] = { |
| { .compatible = "realtek,rt1015", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rt1015_of_match); |
| #endif |
| |
| #ifdef CONFIG_ACPI |
| static struct acpi_device_id rt1015_acpi_match[] = { |
| {"10EC1015", 0,}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match); |
| #endif |
| |
| static void rt1015_parse_dt(struct rt1015_priv *rt1015, struct device *dev) |
| { |
| device_property_read_u32(dev, "realtek,power-up-delay-ms", |
| &rt1015->pdata.power_up_delay_ms); |
| } |
| |
| static int rt1015_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct rt1015_platform_data *pdata = dev_get_platdata(&i2c->dev); |
| struct rt1015_priv *rt1015; |
| int ret; |
| unsigned int val; |
| |
| rt1015 = devm_kzalloc(&i2c->dev, sizeof(*rt1015), GFP_KERNEL); |
| if (!rt1015) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, rt1015); |
| |
| rt1015->pdata = i2s_default_platform_data; |
| |
| if (pdata) |
| rt1015->pdata = *pdata; |
| else |
| rt1015_parse_dt(rt1015, &i2c->dev); |
| |
| rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap); |
| if (IS_ERR(rt1015->regmap)) { |
| ret = PTR_ERR(rt1015->regmap); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| rt1015->hw_config = (i2c->addr == 0x29) ? RT1015_HW_29 : RT1015_HW_28; |
| |
| ret = regmap_read(rt1015->regmap, RT1015_DEVICE_ID, &val); |
| if (ret) { |
| dev_err(&i2c->dev, |
| "Failed to read device register: %d\n", ret); |
| return ret; |
| } else if ((val != RT1015_DEVICE_ID_VAL) && |
| (val != RT1015_DEVICE_ID_VAL2)) { |
| dev_err(&i2c->dev, |
| "Device with ID register %x is not rt1015\n", val); |
| return -ENODEV; |
| } |
| |
| return devm_snd_soc_register_component(&i2c->dev, |
| &soc_component_dev_rt1015, |
| rt1015_dai, ARRAY_SIZE(rt1015_dai)); |
| } |
| |
| static void rt1015_i2c_shutdown(struct i2c_client *client) |
| { |
| struct rt1015_priv *rt1015 = i2c_get_clientdata(client); |
| |
| regmap_write(rt1015->regmap, RT1015_RESET, 0); |
| } |
| |
| static struct i2c_driver rt1015_i2c_driver = { |
| .driver = { |
| .name = "rt1015", |
| .of_match_table = of_match_ptr(rt1015_of_match), |
| .acpi_match_table = ACPI_PTR(rt1015_acpi_match), |
| }, |
| .probe = rt1015_i2c_probe, |
| .shutdown = rt1015_i2c_shutdown, |
| .id_table = rt1015_i2c_id, |
| }; |
| module_i2c_driver(rt1015_i2c_driver); |
| |
| MODULE_DESCRIPTION("ASoC RT1015 driver"); |
| MODULE_AUTHOR("Jack Yu <jack.yu@realtek.com>"); |
| MODULE_LICENSE("GPL v2"); |