blob: d1336c75ccd774370993a9d9c9952378ca0a6259 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* helpers to map values in a linear range to range index
*
* Original idea borrowed from regulator framework
*
* It might be useful if we could support also inversely proportional ranges?
* Copyright 2020 ROHM Semiconductors
*/
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/linear_range.h>
/**
* linear_range_values_in_range - return the amount of values in a range
* @r: pointer to linear range where values are counted
*
* Compute the amount of values in range pointed by @r. Note, values can
* be all equal - range with selectors 0,...,2 with step 0 still contains
* 3 values even though they are all equal.
*
* Return: the amount of values in range pointed by @r
*/
unsigned int linear_range_values_in_range(const struct linear_range *r)
{
if (!r)
return 0;
return r->max_sel - r->min_sel + 1;
}
EXPORT_SYMBOL_GPL(linear_range_values_in_range);
/**
* linear_range_values_in_range_array - return the amount of values in ranges
* @r: pointer to array of linear ranges where values are counted
* @ranges: amount of ranges we include in computation.
*
* Compute the amount of values in ranges pointed by @r. Note, values can
* be all equal - range with selectors 0,...,2 with step 0 still contains
* 3 values even though they are all equal.
*
* Return: the amount of values in first @ranges ranges pointed by @r
*/
unsigned int linear_range_values_in_range_array(const struct linear_range *r,
int ranges)
{
int i, values_in_range = 0;
for (i = 0; i < ranges; i++) {
int values;
values = linear_range_values_in_range(&r[i]);
if (!values)
return values;
values_in_range += values;
}
return values_in_range;
}
EXPORT_SYMBOL_GPL(linear_range_values_in_range_array);
/**
* linear_range_get_max_value - return the largest value in a range
* @r: pointer to linear range where value is looked from
*
* Return: the largest value in the given range
*/
unsigned int linear_range_get_max_value(const struct linear_range *r)
{
return r->min + (r->max_sel - r->min_sel) * r->step;
}
EXPORT_SYMBOL_GPL(linear_range_get_max_value);
/**
* linear_range_get_value - fetch a value from given range
* @r: pointer to linear range where value is looked from
* @selector: selector for which the value is searched
* @val: address where found value is updated
*
* Search given ranges for value which matches given selector.
*
* Return: 0 on success, -EINVAL given selector is not found from any of the
* ranges.
*/
int linear_range_get_value(const struct linear_range *r, unsigned int selector,
unsigned int *val)
{
if (r->min_sel > selector || r->max_sel < selector)
return -EINVAL;
*val = r->min + (selector - r->min_sel) * r->step;
return 0;
}
EXPORT_SYMBOL_GPL(linear_range_get_value);
/**
* linear_range_get_value_array - fetch a value from array of ranges
* @r: pointer to array of linear ranges where value is looked from
* @ranges: amount of ranges in an array
* @selector: selector for which the value is searched
* @val: address where found value is updated
*
* Search through an array of ranges for value which matches given selector.
*
* Return: 0 on success, -EINVAL given selector is not found from any of the
* ranges.
*/
int linear_range_get_value_array(const struct linear_range *r, int ranges,
unsigned int selector, unsigned int *val)
{
int i;
for (i = 0; i < ranges; i++)
if (r[i].min_sel <= selector && r[i].max_sel >= selector)
return linear_range_get_value(&r[i], selector, val);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(linear_range_get_value_array);
/**
* linear_range_get_selector_low - return linear range selector for value
* @r: pointer to linear range where selector is looked from
* @val: value for which the selector is searched
* @selector: address where found selector value is updated
* @found: flag to indicate that given value was in the range
*
* Return selector which which range value is closest match for given
* input value. Value is matching if it is equal or smaller than given
* value. If given value is in the range, then @found is set true.
*
* Return: 0 on success, -EINVAL if range is invalid or does not contain
* value smaller or equal to given value
*/
int linear_range_get_selector_low(const struct linear_range *r,
unsigned int val, unsigned int *selector,
bool *found)
{
*found = false;
if (r->min > val)
return -EINVAL;
if (linear_range_get_max_value(r) < val) {
*selector = r->max_sel;
return 0;
}
*found = true;
if (r->step == 0)
*selector = r->min_sel;
else
*selector = (val - r->min) / r->step + r->min_sel;
return 0;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_low);
/**
* linear_range_get_selector_low_array - return linear range selector for value
* @r: pointer to array of linear ranges where selector is looked from
* @ranges: amount of ranges to scan from array
* @val: value for which the selector is searched
* @selector: address where found selector value is updated
* @found: flag to indicate that given value was in the range
*
* Scan array of ranges for selector which which range value matches given
* input value. Value is matching if it is equal or smaller than given
* value. If given value is found to be in a range scanning is stopped and
* @found is set true. If a range with values smaller than given value is found
* but the range max is being smaller than given value, then the ranges
* biggest selector is updated to @selector but scanning ranges is continued
* and @found is set to false.
*
* Return: 0 on success, -EINVAL if range array is invalid or does not contain
* range with a value smaller or equal to given value
*/
int linear_range_get_selector_low_array(const struct linear_range *r,
int ranges, unsigned int val,
unsigned int *selector, bool *found)
{
int i;
int ret = -EINVAL;
for (i = 0; i < ranges; i++) {
int tmpret;
tmpret = linear_range_get_selector_low(&r[i], val, selector,
found);
if (!tmpret)
ret = 0;
if (*found)
break;
}
return ret;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array);
/**
* linear_range_get_selector_high - return linear range selector for value
* @r: pointer to linear range where selector is looked from
* @val: value for which the selector is searched
* @selector: address where found selector value is updated
* @found: flag to indicate that given value was in the range
*
* Return selector which which range value is closest match for given
* input value. Value is matching if it is equal or higher than given
* value. If given value is in the range, then @found is set true.
*
* Return: 0 on success, -EINVAL if range is invalid or does not contain
* value greater or equal to given value
*/
int linear_range_get_selector_high(const struct linear_range *r,
unsigned int val, unsigned int *selector,
bool *found)
{
*found = false;
if (linear_range_get_max_value(r) < val)
return -EINVAL;
if (r->min > val) {
*selector = r->min_sel;
return 0;
}
*found = true;
if (r->step == 0)
*selector = r->max_sel;
else
*selector = DIV_ROUND_UP(val - r->min, r->step) + r->min_sel;
return 0;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_high);