| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Montage Technology M88DS3103/M88RS6000 demodulator driver |
| * |
| * Copyright (C) 2013 Antti Palosaari <crope@iki.fi> |
| */ |
| |
| #include "m88ds3103_priv.h" |
| |
| static const struct dvb_frontend_ops m88ds3103_ops; |
| |
| /* write single register with mask */ |
| static int m88ds3103_update_bits(struct m88ds3103_dev *dev, |
| u8 reg, u8 mask, u8 val) |
| { |
| int ret; |
| u8 tmp; |
| |
| /* no need for read if whole reg is written */ |
| if (mask != 0xff) { |
| ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1); |
| if (ret) |
| return ret; |
| |
| val &= mask; |
| tmp &= ~mask; |
| val |= tmp; |
| } |
| |
| return regmap_bulk_write(dev->regmap, reg, &val, 1); |
| } |
| |
| /* write reg val table using reg addr auto increment */ |
| static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev, |
| const struct m88ds3103_reg_val *tab, int tab_len) |
| { |
| struct i2c_client *client = dev->client; |
| int ret, i, j; |
| u8 buf[83]; |
| |
| dev_dbg(&client->dev, "tab_len=%d\n", tab_len); |
| |
| if (tab_len > 86) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| for (i = 0, j = 0; i < tab_len; i++, j++) { |
| buf[j] = tab[i].val; |
| |
| if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1 || |
| !((j + 1) % (dev->cfg->i2c_wr_max - 1))) { |
| ret = regmap_bulk_write(dev->regmap, tab[i].reg - j, buf, j + 1); |
| if (ret) |
| goto err; |
| |
| j = -1; |
| } |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Get the demodulator AGC PWM voltage setting supplied to the tuner. |
| */ |
| int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| unsigned tmp; |
| int ret; |
| |
| ret = regmap_read(dev->regmap, 0x3f, &tmp); |
| if (ret == 0) |
| *_agc_pwm = tmp; |
| return ret; |
| } |
| EXPORT_SYMBOL(m88ds3103_get_agc_pwm); |
| |
| static int m88ds3103_read_status(struct dvb_frontend *fe, |
| enum fe_status *status) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, itmp; |
| unsigned int utmp; |
| u8 buf[3]; |
| |
| *status = 0; |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBS: |
| ret = regmap_read(dev->regmap, 0xd1, &utmp); |
| if (ret) |
| goto err; |
| |
| if ((utmp & 0x07) == 0x07) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | |
| FE_HAS_LOCK; |
| break; |
| case SYS_DVBS2: |
| ret = regmap_read(dev->regmap, 0x0d, &utmp); |
| if (ret) |
| goto err; |
| |
| if ((utmp & 0x8f) == 0x8f) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | |
| FE_HAS_LOCK; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid delivery_system\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| dev->fe_status = *status; |
| dev_dbg(&client->dev, "lock=%02x status=%02x\n", utmp, *status); |
| |
| /* CNR */ |
| if (dev->fe_status & FE_HAS_VITERBI) { |
| unsigned int cnr, noise, signal, noise_tot, signal_tot; |
| |
| cnr = 0; |
| /* more iterations for more accurate estimation */ |
| #define M88DS3103_SNR_ITERATIONS 3 |
| |
| switch (c->delivery_system) { |
| case SYS_DVBS: |
| itmp = 0; |
| |
| for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) { |
| ret = regmap_read(dev->regmap, 0xff, &utmp); |
| if (ret) |
| goto err; |
| |
| itmp += utmp; |
| } |
| |
| /* use of single register limits max value to 15 dB */ |
| /* SNR(X) dB = 10 * ln(X) / ln(10) dB */ |
| itmp = DIV_ROUND_CLOSEST(itmp, 8 * M88DS3103_SNR_ITERATIONS); |
| if (itmp) |
| cnr = div_u64((u64) 10000 * intlog2(itmp), intlog2(10)); |
| break; |
| case SYS_DVBS2: |
| noise_tot = 0; |
| signal_tot = 0; |
| |
| for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) { |
| ret = regmap_bulk_read(dev->regmap, 0x8c, buf, 3); |
| if (ret) |
| goto err; |
| |
| noise = buf[1] << 6; /* [13:6] */ |
| noise |= buf[0] & 0x3f; /* [5:0] */ |
| noise >>= 2; |
| signal = buf[2] * buf[2]; |
| signal >>= 1; |
| |
| noise_tot += noise; |
| signal_tot += signal; |
| } |
| |
| noise = noise_tot / M88DS3103_SNR_ITERATIONS; |
| signal = signal_tot / M88DS3103_SNR_ITERATIONS; |
| |
| /* SNR(X) dB = 10 * log10(X) dB */ |
| if (signal > noise) { |
| itmp = signal / noise; |
| cnr = div_u64((u64) 10000 * intlog10(itmp), (1 << 24)); |
| } |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid delivery_system\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (cnr) { |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; |
| c->cnr.stat[0].svalue = cnr; |
| } else { |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| } else { |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| /* BER */ |
| if (dev->fe_status & FE_HAS_LOCK) { |
| unsigned int utmp, post_bit_error, post_bit_count; |
| |
| switch (c->delivery_system) { |
| case SYS_DVBS: |
| ret = regmap_write(dev->regmap, 0xf9, 0x04); |
| if (ret) |
| goto err; |
| |
| ret = regmap_read(dev->regmap, 0xf8, &utmp); |
| if (ret) |
| goto err; |
| |
| /* measurement ready? */ |
| if (!(utmp & 0x10)) { |
| ret = regmap_bulk_read(dev->regmap, 0xf6, buf, 2); |
| if (ret) |
| goto err; |
| |
| post_bit_error = buf[1] << 8 | buf[0] << 0; |
| post_bit_count = 0x800000; |
| dev->post_bit_error += post_bit_error; |
| dev->post_bit_count += post_bit_count; |
| dev->dvbv3_ber = post_bit_error; |
| |
| /* restart measurement */ |
| utmp |= 0x10; |
| ret = regmap_write(dev->regmap, 0xf8, utmp); |
| if (ret) |
| goto err; |
| } |
| break; |
| case SYS_DVBS2: |
| ret = regmap_bulk_read(dev->regmap, 0xd5, buf, 3); |
| if (ret) |
| goto err; |
| |
| utmp = buf[2] << 16 | buf[1] << 8 | buf[0] << 0; |
| |
| /* enough data? */ |
| if (utmp > 4000) { |
| ret = regmap_bulk_read(dev->regmap, 0xf7, buf, 2); |
| if (ret) |
| goto err; |
| |
| post_bit_error = buf[1] << 8 | buf[0] << 0; |
| post_bit_count = 32 * utmp; /* TODO: FEC */ |
| dev->post_bit_error += post_bit_error; |
| dev->post_bit_count += post_bit_count; |
| dev->dvbv3_ber = post_bit_error; |
| |
| /* restart measurement */ |
| ret = regmap_write(dev->regmap, 0xd1, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xf9, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xf9, 0x00); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xd1, 0x00); |
| if (ret) |
| goto err; |
| } |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid delivery_system\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; |
| c->post_bit_error.stat[0].uvalue = dev->post_bit_error; |
| c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; |
| c->post_bit_count.stat[0].uvalue = dev->post_bit_count; |
| } else { |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_set_frontend(struct dvb_frontend *fe) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, len; |
| const struct m88ds3103_reg_val *init; |
| u8 u8tmp, u8tmp1 = 0, u8tmp2 = 0; /* silence compiler warning */ |
| u8 buf[3]; |
| u16 u16tmp; |
| u32 tuner_frequency_khz, target_mclk; |
| s32 s32tmp; |
| static const struct reg_sequence reset_buf[] = { |
| {0x07, 0x80}, {0x07, 0x00} |
| }; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%d modulation=%d frequency=%u symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n", |
| c->delivery_system, c->modulation, c->frequency, c->symbol_rate, |
| c->inversion, c->pilot, c->rolloff); |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| /* reset */ |
| ret = regmap_multi_reg_write(dev->regmap, reset_buf, 2); |
| if (ret) |
| goto err; |
| |
| /* Disable demod clock path */ |
| if (dev->chip_id == M88RS6000_CHIP_ID) { |
| ret = regmap_write(dev->regmap, 0x06, 0xe0); |
| if (ret) |
| goto err; |
| } |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) { |
| ret = fe->ops.tuner_ops.set_params(fe); |
| if (ret) |
| goto err; |
| } |
| |
| if (fe->ops.tuner_ops.get_frequency) { |
| ret = fe->ops.tuner_ops.get_frequency(fe, &tuner_frequency_khz); |
| if (ret) |
| goto err; |
| } else { |
| /* |
| * Use nominal target frequency as tuner driver does not provide |
| * actual frequency used. Carrier offset calculation is not |
| * valid. |
| */ |
| tuner_frequency_khz = c->frequency; |
| } |
| |
| /* select M88RS6000 demod main mclk and ts mclk from tuner die. */ |
| if (dev->chip_id == M88RS6000_CHIP_ID) { |
| if (c->symbol_rate > 45010000) |
| dev->mclk = 110250000; |
| else |
| dev->mclk = 96000000; |
| |
| if (c->delivery_system == SYS_DVBS) |
| target_mclk = 96000000; |
| else |
| target_mclk = 144000000; |
| |
| /* Enable demod clock path */ |
| ret = regmap_write(dev->regmap, 0x06, 0x00); |
| if (ret) |
| goto err; |
| usleep_range(10000, 20000); |
| } else { |
| /* set M88DS3103 mclk and ts mclk. */ |
| dev->mclk = 96000000; |
| |
| switch (dev->cfg->ts_mode) { |
| case M88DS3103_TS_SERIAL: |
| case M88DS3103_TS_SERIAL_D7: |
| target_mclk = dev->cfg->ts_clk; |
| break; |
| case M88DS3103_TS_PARALLEL: |
| case M88DS3103_TS_CI: |
| if (c->delivery_system == SYS_DVBS) |
| target_mclk = 96000000; |
| else { |
| if (c->symbol_rate < 18000000) |
| target_mclk = 96000000; |
| else if (c->symbol_rate < 28000000) |
| target_mclk = 144000000; |
| else |
| target_mclk = 192000000; |
| } |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid ts_mode\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| switch (target_mclk) { |
| case 96000000: |
| u8tmp1 = 0x02; /* 0b10 */ |
| u8tmp2 = 0x01; /* 0b01 */ |
| break; |
| case 144000000: |
| u8tmp1 = 0x00; /* 0b00 */ |
| u8tmp2 = 0x01; /* 0b01 */ |
| break; |
| case 192000000: |
| u8tmp1 = 0x03; /* 0b11 */ |
| u8tmp2 = 0x00; /* 0b00 */ |
| break; |
| } |
| ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6); |
| if (ret) |
| goto err; |
| ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6); |
| if (ret) |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap, 0xb2, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x00, 0x01); |
| if (ret) |
| goto err; |
| |
| switch (c->delivery_system) { |
| case SYS_DVBS: |
| if (dev->chip_id == M88RS6000_CHIP_ID) { |
| len = ARRAY_SIZE(m88rs6000_dvbs_init_reg_vals); |
| init = m88rs6000_dvbs_init_reg_vals; |
| } else { |
| len = ARRAY_SIZE(m88ds3103_dvbs_init_reg_vals); |
| init = m88ds3103_dvbs_init_reg_vals; |
| } |
| break; |
| case SYS_DVBS2: |
| if (dev->chip_id == M88RS6000_CHIP_ID) { |
| len = ARRAY_SIZE(m88rs6000_dvbs2_init_reg_vals); |
| init = m88rs6000_dvbs2_init_reg_vals; |
| } else { |
| len = ARRAY_SIZE(m88ds3103_dvbs2_init_reg_vals); |
| init = m88ds3103_dvbs2_init_reg_vals; |
| } |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid delivery_system\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* program init table */ |
| if (c->delivery_system != dev->delivery_system) { |
| ret = m88ds3103_wr_reg_val_tab(dev, init, len); |
| if (ret) |
| goto err; |
| } |
| |
| if (dev->chip_id == M88RS6000_CHIP_ID) { |
| if (c->delivery_system == SYS_DVBS2 && |
| c->symbol_rate <= 5000000) { |
| ret = regmap_write(dev->regmap, 0xc0, 0x04); |
| if (ret) |
| goto err; |
| buf[0] = 0x09; |
| buf[1] = 0x22; |
| buf[2] = 0x88; |
| ret = regmap_bulk_write(dev->regmap, 0x8a, buf, 3); |
| if (ret) |
| goto err; |
| } |
| ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap, 0xf1, 0x01); |
| if (ret) |
| goto err; |
| ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80); |
| if (ret) |
| goto err; |
| } |
| |
| switch (dev->cfg->ts_mode) { |
| case M88DS3103_TS_SERIAL: |
| u8tmp1 = 0x00; |
| u8tmp = 0x06; |
| break; |
| case M88DS3103_TS_SERIAL_D7: |
| u8tmp1 = 0x20; |
| u8tmp = 0x06; |
| break; |
| case M88DS3103_TS_PARALLEL: |
| u8tmp = 0x02; |
| break; |
| case M88DS3103_TS_CI: |
| u8tmp = 0x03; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid ts_mode\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (dev->cfg->ts_clk_pol) |
| u8tmp |= 0x40; |
| |
| /* TS mode */ |
| ret = regmap_write(dev->regmap, 0xfd, u8tmp); |
| if (ret) |
| goto err; |
| |
| switch (dev->cfg->ts_mode) { |
| case M88DS3103_TS_SERIAL: |
| case M88DS3103_TS_SERIAL_D7: |
| ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1); |
| if (ret) |
| goto err; |
| u16tmp = 0; |
| u8tmp1 = 0x3f; |
| u8tmp2 = 0x3f; |
| break; |
| default: |
| u16tmp = DIV_ROUND_UP(target_mclk, dev->cfg->ts_clk); |
| u8tmp1 = u16tmp / 2 - 1; |
| u8tmp2 = DIV_ROUND_UP(u16tmp, 2) - 1; |
| } |
| |
| dev_dbg(&client->dev, "target_mclk=%u ts_clk=%u ts_clk_divide_ratio=%u\n", |
| target_mclk, dev->cfg->ts_clk, u16tmp); |
| |
| /* u8tmp1[5:2] => fe[3:0], u8tmp1[1:0] => ea[7:6] */ |
| /* u8tmp2[5:0] => ea[5:0] */ |
| u8tmp = (u8tmp1 >> 2) & 0x0f; |
| ret = regmap_update_bits(dev->regmap, 0xfe, 0x0f, u8tmp); |
| if (ret) |
| goto err; |
| u8tmp = ((u8tmp1 & 0x03) << 6) | u8tmp2 >> 0; |
| ret = regmap_write(dev->regmap, 0xea, u8tmp); |
| if (ret) |
| goto err; |
| |
| if (c->symbol_rate <= 3000000) |
| u8tmp = 0x20; |
| else if (c->symbol_rate <= 10000000) |
| u8tmp = 0x10; |
| else |
| u8tmp = 0x06; |
| |
| ret = regmap_write(dev->regmap, 0xc3, 0x08); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xc8, u8tmp); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xc4, 0x08); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xc7, 0x00); |
| if (ret) |
| goto err; |
| |
| u16tmp = DIV_ROUND_CLOSEST_ULL((u64)c->symbol_rate * 0x10000, dev->mclk); |
| buf[0] = (u16tmp >> 0) & 0xff; |
| buf[1] = (u16tmp >> 8) & 0xff; |
| ret = regmap_bulk_write(dev->regmap, 0x61, buf, 2); |
| if (ret) |
| goto err; |
| |
| ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1); |
| if (ret) |
| goto err; |
| |
| ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x33, dev->cfg->agc); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "carrier offset=%d\n", |
| (tuner_frequency_khz - c->frequency)); |
| |
| /* Use 32-bit calc as there is no s64 version of DIV_ROUND_CLOSEST() */ |
| s32tmp = 0x10000 * (tuner_frequency_khz - c->frequency); |
| s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk / 1000); |
| buf[0] = (s32tmp >> 0) & 0xff; |
| buf[1] = (s32tmp >> 8) & 0xff; |
| ret = regmap_bulk_write(dev->regmap, 0x5e, buf, 2); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0x00, 0x00); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xb2, 0x00); |
| if (ret) |
| goto err; |
| |
| dev->delivery_system = c->delivery_system; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_init(struct dvb_frontend *fe) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, len, rem; |
| unsigned int utmp; |
| const struct firmware *firmware; |
| const char *name; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* set cold state by default */ |
| dev->warm = false; |
| |
| /* wake up device from sleep */ |
| ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01); |
| if (ret) |
| goto err; |
| ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00); |
| if (ret) |
| goto err; |
| ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00); |
| if (ret) |
| goto err; |
| |
| /* firmware status */ |
| ret = regmap_read(dev->regmap, 0xb9, &utmp); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "firmware=%02x\n", utmp); |
| |
| if (utmp) |
| goto warm; |
| |
| /* global reset, global diseqc reset, golbal fec reset */ |
| ret = regmap_write(dev->regmap, 0x07, 0xe0); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap, 0x07, 0x00); |
| if (ret) |
| goto err; |
| |
| /* cold state - try to download firmware */ |
| dev_info(&client->dev, "found a '%s' in cold state\n", |
| m88ds3103_ops.info.name); |
| |
| if (dev->chip_id == M88RS6000_CHIP_ID) |
| name = M88RS6000_FIRMWARE; |
| else |
| name = M88DS3103_FIRMWARE; |
| /* request the firmware, this will block and timeout */ |
| ret = request_firmware(&firmware, name, &client->dev); |
| if (ret) { |
| dev_err(&client->dev, "firmware file '%s' not found\n", name); |
| goto err; |
| } |
| |
| dev_info(&client->dev, "downloading firmware from file '%s'\n", name); |
| |
| ret = regmap_write(dev->regmap, 0xb2, 0x01); |
| if (ret) |
| goto err_release_firmware; |
| |
| for (rem = firmware->size; rem > 0; rem -= (dev->cfg->i2c_wr_max - 1)) { |
| len = min(dev->cfg->i2c_wr_max - 1, rem); |
| ret = regmap_bulk_write(dev->regmap, 0xb0, |
| &firmware->data[firmware->size - rem], |
| len); |
| if (ret) { |
| dev_err(&client->dev, "firmware download failed %d\n", |
| ret); |
| goto err_release_firmware; |
| } |
| } |
| |
| ret = regmap_write(dev->regmap, 0xb2, 0x00); |
| if (ret) |
| goto err_release_firmware; |
| |
| release_firmware(firmware); |
| |
| ret = regmap_read(dev->regmap, 0xb9, &utmp); |
| if (ret) |
| goto err; |
| |
| if (!utmp) { |
| ret = -EINVAL; |
| dev_info(&client->dev, "firmware did not run\n"); |
| goto err; |
| } |
| |
| dev_info(&client->dev, "found a '%s' in warm state\n", |
| m88ds3103_ops.info.name); |
| dev_info(&client->dev, "firmware version: %X.%X\n", |
| (utmp >> 4) & 0xf, (utmp >> 0 & 0xf)); |
| |
| warm: |
| /* warm state */ |
| dev->warm = true; |
| |
| /* init stats here in order signal app which stats are supported */ |
| c->cnr.len = 1; |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->post_bit_error.len = 1; |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->post_bit_count.len = 1; |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| |
| return 0; |
| err_release_firmware: |
| release_firmware(firmware); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_sleep(struct dvb_frontend *fe) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| int ret; |
| unsigned int utmp; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| dev->fe_status = 0; |
| dev->delivery_system = SYS_UNDEFINED; |
| |
| /* TS Hi-Z */ |
| if (dev->chip_id == M88RS6000_CHIP_ID) |
| utmp = 0x29; |
| else |
| utmp = 0x27; |
| ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00); |
| if (ret) |
| goto err; |
| |
| /* sleep */ |
| ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00); |
| if (ret) |
| goto err; |
| ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01); |
| if (ret) |
| goto err; |
| ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *c) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| int ret; |
| u8 buf[3]; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| if (!dev->warm || !(dev->fe_status & FE_HAS_LOCK)) { |
| ret = 0; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBS: |
| ret = regmap_bulk_read(dev->regmap, 0xe0, &buf[0], 1); |
| if (ret) |
| goto err; |
| |
| ret = regmap_bulk_read(dev->regmap, 0xe6, &buf[1], 1); |
| if (ret) |
| goto err; |
| |
| switch ((buf[0] >> 2) & 0x01) { |
| case 0: |
| c->inversion = INVERSION_OFF; |
| break; |
| case 1: |
| c->inversion = INVERSION_ON; |
| break; |
| } |
| |
| switch ((buf[1] >> 5) & 0x07) { |
| case 0: |
| c->fec_inner = FEC_7_8; |
| break; |
| case 1: |
| c->fec_inner = FEC_5_6; |
| break; |
| case 2: |
| c->fec_inner = FEC_3_4; |
| break; |
| case 3: |
| c->fec_inner = FEC_2_3; |
| break; |
| case 4: |
| c->fec_inner = FEC_1_2; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid fec_inner\n"); |
| } |
| |
| c->modulation = QPSK; |
| |
| break; |
| case SYS_DVBS2: |
| ret = regmap_bulk_read(dev->regmap, 0x7e, &buf[0], 1); |
| if (ret) |
| goto err; |
| |
| ret = regmap_bulk_read(dev->regmap, 0x89, &buf[1], 1); |
| if (ret) |
| goto err; |
| |
| ret = regmap_bulk_read(dev->regmap, 0xf2, &buf[2], 1); |
| if (ret) |
| goto err; |
| |
| switch ((buf[0] >> 0) & 0x0f) { |
| case 2: |
| c->fec_inner = FEC_2_5; |
| break; |
| case 3: |
| c->fec_inner = FEC_1_2; |
| break; |
| case 4: |
| c->fec_inner = FEC_3_5; |
| break; |
| case 5: |
| c->fec_inner = FEC_2_3; |
| break; |
| case 6: |
| c->fec_inner = FEC_3_4; |
| break; |
| case 7: |
| c->fec_inner = FEC_4_5; |
| break; |
| case 8: |
| c->fec_inner = FEC_5_6; |
| break; |
| case 9: |
| c->fec_inner = FEC_8_9; |
| break; |
| case 10: |
| c->fec_inner = FEC_9_10; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid fec_inner\n"); |
| } |
| |
| switch ((buf[0] >> 5) & 0x01) { |
| case 0: |
| c->pilot = PILOT_OFF; |
| break; |
| case 1: |
| c->pilot = PILOT_ON; |
| break; |
| } |
| |
| switch ((buf[0] >> 6) & 0x07) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = PSK_8; |
| break; |
| case 2: |
| c->modulation = APSK_16; |
| break; |
| case 3: |
| c->modulation = APSK_32; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid modulation\n"); |
| } |
| |
| switch ((buf[1] >> 7) & 0x01) { |
| case 0: |
| c->inversion = INVERSION_OFF; |
| break; |
| case 1: |
| c->inversion = INVERSION_ON; |
| break; |
| } |
| |
| switch ((buf[2] >> 0) & 0x03) { |
| case 0: |
| c->rolloff = ROLLOFF_35; |
| break; |
| case 1: |
| c->rolloff = ROLLOFF_25; |
| break; |
| case 2: |
| c->rolloff = ROLLOFF_20; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid rolloff\n"); |
| } |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid delivery_system\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_bulk_read(dev->regmap, 0x6d, buf, 2); |
| if (ret) |
| goto err; |
| |
| c->symbol_rate = DIV_ROUND_CLOSEST_ULL((u64)(buf[1] << 8 | buf[0] << 0) * dev->mclk, 0x10000); |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| |
| if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL) |
| *snr = div_s64(c->cnr.stat[0].svalue, 100); |
| else |
| *snr = 0; |
| |
| return 0; |
| } |
| |
| static int m88ds3103_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| |
| *ber = dev->dvbv3_ber; |
| |
| return 0; |
| } |
| |
| static int m88ds3103_set_tone(struct dvb_frontend *fe, |
| enum fe_sec_tone_mode fe_sec_tone_mode) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| int ret; |
| unsigned int utmp, tone, reg_a1_mask; |
| |
| dev_dbg(&client->dev, "fe_sec_tone_mode=%d\n", fe_sec_tone_mode); |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (fe_sec_tone_mode) { |
| case SEC_TONE_ON: |
| tone = 0; |
| reg_a1_mask = 0x47; |
| break; |
| case SEC_TONE_OFF: |
| tone = 1; |
| reg_a1_mask = 0x00; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid fe_sec_tone_mode\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| utmp = tone << 7 | dev->cfg->envelope_mode << 5; |
| ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp); |
| if (ret) |
| goto err; |
| |
| utmp = 1 << 2; |
| ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_set_voltage(struct dvb_frontend *fe, |
| enum fe_sec_voltage fe_sec_voltage) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| int ret; |
| unsigned int utmp; |
| bool voltage_sel, voltage_dis; |
| |
| dev_dbg(&client->dev, "fe_sec_voltage=%d\n", fe_sec_voltage); |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (fe_sec_voltage) { |
| case SEC_VOLTAGE_18: |
| voltage_sel = true; |
| voltage_dis = false; |
| break; |
| case SEC_VOLTAGE_13: |
| voltage_sel = false; |
| voltage_dis = false; |
| break; |
| case SEC_VOLTAGE_OFF: |
| voltage_sel = false; |
| voltage_dis = true; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid fe_sec_voltage\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* output pin polarity */ |
| voltage_sel ^= dev->cfg->lnb_hv_pol; |
| voltage_dis ^= dev->cfg->lnb_en_pol; |
| |
| utmp = voltage_dis << 1 | voltage_sel << 0; |
| ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_diseqc_send_master_cmd(struct dvb_frontend *fe, |
| struct dvb_diseqc_master_cmd *diseqc_cmd) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| int ret; |
| unsigned int utmp; |
| unsigned long timeout; |
| |
| dev_dbg(&client->dev, "msg=%*ph\n", |
| diseqc_cmd->msg_len, diseqc_cmd->msg); |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| utmp = dev->cfg->envelope_mode << 5; |
| ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp); |
| if (ret) |
| goto err; |
| |
| ret = regmap_bulk_write(dev->regmap, 0xa3, diseqc_cmd->msg, |
| diseqc_cmd->msg_len); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, 0xa1, |
| (diseqc_cmd->msg_len - 1) << 3 | 0x07); |
| if (ret) |
| goto err; |
| |
| /* wait DiSEqC TX ready */ |
| #define SEND_MASTER_CMD_TIMEOUT 120 |
| timeout = jiffies + msecs_to_jiffies(SEND_MASTER_CMD_TIMEOUT); |
| |
| /* DiSEqC message period is 13.5 ms per byte */ |
| utmp = diseqc_cmd->msg_len * 13500; |
| usleep_range(utmp - 4000, utmp); |
| |
| for (utmp = 1; !time_after(jiffies, timeout) && utmp;) { |
| ret = regmap_read(dev->regmap, 0xa1, &utmp); |
| if (ret) |
| goto err; |
| utmp = (utmp >> 6) & 0x1; |
| } |
| |
| if (utmp == 0) { |
| dev_dbg(&client->dev, "diseqc tx took %u ms\n", |
| jiffies_to_msecs(jiffies) - |
| (jiffies_to_msecs(timeout) - SEND_MASTER_CMD_TIMEOUT)); |
| } else { |
| dev_dbg(&client->dev, "diseqc tx timeout\n"); |
| |
| ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40); |
| if (ret) |
| goto err; |
| } |
| |
| ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80); |
| if (ret) |
| goto err; |
| |
| if (utmp == 1) { |
| ret = -ETIMEDOUT; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_diseqc_send_burst(struct dvb_frontend *fe, |
| enum fe_sec_mini_cmd fe_sec_mini_cmd) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| int ret; |
| unsigned int utmp, burst; |
| unsigned long timeout; |
| |
| dev_dbg(&client->dev, "fe_sec_mini_cmd=%d\n", fe_sec_mini_cmd); |
| |
| if (!dev->warm) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| utmp = dev->cfg->envelope_mode << 5; |
| ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp); |
| if (ret) |
| goto err; |
| |
| switch (fe_sec_mini_cmd) { |
| case SEC_MINI_A: |
| burst = 0x02; |
| break; |
| case SEC_MINI_B: |
| burst = 0x01; |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid fe_sec_mini_cmd\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap, 0xa1, burst); |
| if (ret) |
| goto err; |
| |
| /* wait DiSEqC TX ready */ |
| #define SEND_BURST_TIMEOUT 40 |
| timeout = jiffies + msecs_to_jiffies(SEND_BURST_TIMEOUT); |
| |
| /* DiSEqC ToneBurst period is 12.5 ms */ |
| usleep_range(8500, 12500); |
| |
| for (utmp = 1; !time_after(jiffies, timeout) && utmp;) { |
| ret = regmap_read(dev->regmap, 0xa1, &utmp); |
| if (ret) |
| goto err; |
| utmp = (utmp >> 6) & 0x1; |
| } |
| |
| if (utmp == 0) { |
| dev_dbg(&client->dev, "diseqc tx took %u ms\n", |
| jiffies_to_msecs(jiffies) - |
| (jiffies_to_msecs(timeout) - SEND_BURST_TIMEOUT)); |
| } else { |
| dev_dbg(&client->dev, "diseqc tx timeout\n"); |
| |
| ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40); |
| if (ret) |
| goto err; |
| } |
| |
| ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80); |
| if (ret) |
| goto err; |
| |
| if (utmp == 1) { |
| ret = -ETIMEDOUT; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 3000; |
| |
| return 0; |
| } |
| |
| static void m88ds3103_release(struct dvb_frontend *fe) |
| { |
| struct m88ds3103_dev *dev = fe->demodulator_priv; |
| struct i2c_client *client = dev->client; |
| |
| i2c_unregister_device(client); |
| } |
| |
| static int m88ds3103_select(struct i2c_mux_core *muxc, u32 chan) |
| { |
| struct m88ds3103_dev *dev = i2c_mux_priv(muxc); |
| struct i2c_client *client = dev->client; |
| int ret; |
| struct i2c_msg msg = { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = "\x03\x11", |
| }; |
| |
| /* Open tuner I2C repeater for 1 xfer, closes automatically */ |
| ret = __i2c_transfer(client->adapter, &msg, 1); |
| if (ret != 1) { |
| dev_warn(&client->dev, "i2c wr failed=%d\n", ret); |
| if (ret >= 0) |
| ret = -EREMOTEIO; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * XXX: That is wrapper to m88ds3103_probe() via driver core in order to provide |
| * proper I2C client for legacy media attach binding. |
| * New users must use I2C client binding directly! |
| */ |
| struct dvb_frontend *m88ds3103_attach(const struct m88ds3103_config *cfg, |
| struct i2c_adapter *i2c, |
| struct i2c_adapter **tuner_i2c_adapter) |
| { |
| struct i2c_client *client; |
| struct i2c_board_info board_info; |
| struct m88ds3103_platform_data pdata = {}; |
| |
| pdata.clk = cfg->clock; |
| pdata.i2c_wr_max = cfg->i2c_wr_max; |
| pdata.ts_mode = cfg->ts_mode; |
| pdata.ts_clk = cfg->ts_clk; |
| pdata.ts_clk_pol = cfg->ts_clk_pol; |
| pdata.spec_inv = cfg->spec_inv; |
| pdata.agc = cfg->agc; |
| pdata.agc_inv = cfg->agc_inv; |
| pdata.clk_out = cfg->clock_out; |
| pdata.envelope_mode = cfg->envelope_mode; |
| pdata.lnb_hv_pol = cfg->lnb_hv_pol; |
| pdata.lnb_en_pol = cfg->lnb_en_pol; |
| pdata.attach_in_use = true; |
| |
| memset(&board_info, 0, sizeof(board_info)); |
| strscpy(board_info.type, "m88ds3103", I2C_NAME_SIZE); |
| board_info.addr = cfg->i2c_addr; |
| board_info.platform_data = &pdata; |
| client = i2c_new_device(i2c, &board_info); |
| if (!client || !client->dev.driver) |
| return NULL; |
| |
| *tuner_i2c_adapter = pdata.get_i2c_adapter(client); |
| return pdata.get_dvb_frontend(client); |
| } |
| EXPORT_SYMBOL_GPL(m88ds3103_attach); |
| |
| static const struct dvb_frontend_ops m88ds3103_ops = { |
| .delsys = {SYS_DVBS, SYS_DVBS2}, |
| .info = { |
| .name = "Montage Technology M88DS3103", |
| .frequency_min_hz = 950 * MHz, |
| .frequency_max_hz = 2150 * MHz, |
| .frequency_tolerance_hz = 5 * MHz, |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 45000000, |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_4_5 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_6_7 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_8_9 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_RECOVER | |
| FE_CAN_2G_MODULATION |
| }, |
| |
| .release = m88ds3103_release, |
| |
| .get_tune_settings = m88ds3103_get_tune_settings, |
| |
| .init = m88ds3103_init, |
| .sleep = m88ds3103_sleep, |
| |
| .set_frontend = m88ds3103_set_frontend, |
| .get_frontend = m88ds3103_get_frontend, |
| |
| .read_status = m88ds3103_read_status, |
| .read_snr = m88ds3103_read_snr, |
| .read_ber = m88ds3103_read_ber, |
| |
| .diseqc_send_master_cmd = m88ds3103_diseqc_send_master_cmd, |
| .diseqc_send_burst = m88ds3103_diseqc_send_burst, |
| |
| .set_tone = m88ds3103_set_tone, |
| .set_voltage = m88ds3103_set_voltage, |
| }; |
| |
| static struct dvb_frontend *m88ds3103_get_dvb_frontend(struct i2c_client *client) |
| { |
| struct m88ds3103_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| return &dev->fe; |
| } |
| |
| static struct i2c_adapter *m88ds3103_get_i2c_adapter(struct i2c_client *client) |
| { |
| struct m88ds3103_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| return dev->muxc->adapter[0]; |
| } |
| |
| static int m88ds3103_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct m88ds3103_dev *dev; |
| struct m88ds3103_platform_data *pdata = client->dev.platform_data; |
| int ret; |
| unsigned int utmp; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| dev->client = client; |
| dev->config.clock = pdata->clk; |
| dev->config.i2c_wr_max = pdata->i2c_wr_max; |
| dev->config.ts_mode = pdata->ts_mode; |
| dev->config.ts_clk = pdata->ts_clk * 1000; |
| dev->config.ts_clk_pol = pdata->ts_clk_pol; |
| dev->config.spec_inv = pdata->spec_inv; |
| dev->config.agc_inv = pdata->agc_inv; |
| dev->config.clock_out = pdata->clk_out; |
| dev->config.envelope_mode = pdata->envelope_mode; |
| dev->config.agc = pdata->agc; |
| dev->config.lnb_hv_pol = pdata->lnb_hv_pol; |
| dev->config.lnb_en_pol = pdata->lnb_en_pol; |
| dev->cfg = &dev->config; |
| /* create regmap */ |
| dev->regmap_config.reg_bits = 8, |
| dev->regmap_config.val_bits = 8, |
| dev->regmap_config.lock_arg = dev, |
| dev->regmap = devm_regmap_init_i2c(client, &dev->regmap_config); |
| if (IS_ERR(dev->regmap)) { |
| ret = PTR_ERR(dev->regmap); |
| goto err_kfree; |
| } |
| |
| /* 0x00: chip id[6:0], 0x01: chip ver[7:0], 0x02: chip ver[15:8] */ |
| ret = regmap_read(dev->regmap, 0x00, &utmp); |
| if (ret) |
| goto err_kfree; |
| |
| dev->chip_id = utmp >> 1; |
| dev_dbg(&client->dev, "chip_id=%02x\n", dev->chip_id); |
| |
| switch (dev->chip_id) { |
| case M88RS6000_CHIP_ID: |
| case M88DS3103_CHIP_ID: |
| break; |
| default: |
| ret = -ENODEV; |
| dev_err(&client->dev, "Unknown device. Chip_id=%02x\n", dev->chip_id); |
| goto err_kfree; |
| } |
| |
| switch (dev->cfg->clock_out) { |
| case M88DS3103_CLOCK_OUT_DISABLED: |
| utmp = 0x80; |
| break; |
| case M88DS3103_CLOCK_OUT_ENABLED: |
| utmp = 0x00; |
| break; |
| case M88DS3103_CLOCK_OUT_ENABLED_DIV2: |
| utmp = 0x10; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err_kfree; |
| } |
| |
| if (!pdata->ts_clk) { |
| ret = -EINVAL; |
| goto err_kfree; |
| } |
| |
| /* 0x29 register is defined differently for m88rs6000. */ |
| /* set internal tuner address to 0x21 */ |
| if (dev->chip_id == M88RS6000_CHIP_ID) |
| utmp = 0x00; |
| |
| ret = regmap_write(dev->regmap, 0x29, utmp); |
| if (ret) |
| goto err_kfree; |
| |
| /* sleep */ |
| ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00); |
| if (ret) |
| goto err_kfree; |
| ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01); |
| if (ret) |
| goto err_kfree; |
| ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10); |
| if (ret) |
| goto err_kfree; |
| |
| /* create mux i2c adapter for tuner */ |
| dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0, |
| m88ds3103_select, NULL); |
| if (!dev->muxc) { |
| ret = -ENOMEM; |
| goto err_kfree; |
| } |
| dev->muxc->priv = dev; |
| ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0); |
| if (ret) |
| goto err_kfree; |
| |
| /* create dvb_frontend */ |
| memcpy(&dev->fe.ops, &m88ds3103_ops, sizeof(struct dvb_frontend_ops)); |
| if (dev->chip_id == M88RS6000_CHIP_ID) |
| strscpy(dev->fe.ops.info.name, "Montage Technology M88RS6000", |
| sizeof(dev->fe.ops.info.name)); |
| if (!pdata->attach_in_use) |
| dev->fe.ops.release = NULL; |
| dev->fe.demodulator_priv = dev; |
| i2c_set_clientdata(client, dev); |
| |
| /* setup callbacks */ |
| pdata->get_dvb_frontend = m88ds3103_get_dvb_frontend; |
| pdata->get_i2c_adapter = m88ds3103_get_i2c_adapter; |
| return 0; |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int m88ds3103_remove(struct i2c_client *client) |
| { |
| struct m88ds3103_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| i2c_mux_del_adapters(dev->muxc); |
| |
| kfree(dev); |
| return 0; |
| } |
| |
| static const struct i2c_device_id m88ds3103_id_table[] = { |
| {"m88ds3103", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, m88ds3103_id_table); |
| |
| static struct i2c_driver m88ds3103_driver = { |
| .driver = { |
| .name = "m88ds3103", |
| .suppress_bind_attrs = true, |
| }, |
| .probe = m88ds3103_probe, |
| .remove = m88ds3103_remove, |
| .id_table = m88ds3103_id_table, |
| }; |
| |
| module_i2c_driver(m88ds3103_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Montage Technology M88DS3103 DVB-S/S2 demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(M88DS3103_FIRMWARE); |
| MODULE_FIRMWARE(M88RS6000_FIRMWARE); |