blob: 8ea430168ea54952cc9219df0e24817be577b5a9 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "Plat'Home OpenBlocksA6";
compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
serial@12000 {
status = "okay";
};
serial@12100 {
status = "okay";
};
sata@80000 {
nr-ports = <1>;
status = "okay";
};
i2c@11100 {
status = "okay";
s35390a: s35390a@30 {
compatible = "sii,s35390a";
reg = <0x30>;
};
};
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_dip_switches>;
pinctrl-names = "default";
pmx_uart0: pmx-uart0 {
marvell,pins = "mpp10", "mpp11", "mpp15",
"mpp16";
marvell,function = "uart0";
};
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp13", "mpp14", "mpp8",
"mpp9";
marvell,function = "uart1";
};
pmx_sysrst: pmx-sysrst {
marvell,pins = "mpp6";
marvell,function = "sysrst";
};
pmx_dip_switches: pmx-dip-switches {
marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "gpio";
};
pmx_gpio_header: pmx-gpio-header {
marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
"mpp28", "mpp29", "mpp30", "mpp31";
marvell,function = "gpio";
};
pmx_gpio_init: pmx-init {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_usb_oc: pmx-usb-oc {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_leds: pmx-leds {
marvell,pins = "mpp41", "mpp42", "mpp43";
marvell,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_leds>;
pinctrl-names = "default";
led-red {
label = "obsa6:red:stat";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
led-green {
label = "obsa6:green:stat";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
led-yellow {
label = "obsa6:yellow:stat";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_gpio_init>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
power {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
chip-delay = <25>;
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0 0x90000>;
};
partition@90000 {
label = "env";
reg = <0x90000 0x44000>;
};
partition@d4000 {
label = "test";
reg = <0xd4000 0x20000>;
};
partition@f4000 {
label = "conf";
reg = <0xf4000 0x400000>;
};
partition@4f4000 {
label = "linux";
reg = <0x4f4000 0x1d20000>;
};
partition@2214000 {
label = "user";
reg = <0x2214000 0x1dec000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&gpio0 {
status = "okay";
pinctrl-0 = <&pmx_gpio_header>;
pinctrl-names = "default";
};