| * Texas Instruments SoC audio setups with TLV320AIC3X Codec |
| |
| Required properties: |
| - compatible : "ti,da830-evm-audio" : forDM365/DA8xx/OMAPL1x/AM33xx |
| - ti,model : The user-visible name of this sound complex. |
| - ti,audio-codec : The phandle of the TLV320AIC3x audio codec |
| - ti,mcasp-controller : The phandle of the McASP controller |
| - ti,audio-routing : A list of the connections between audio components. |
| Each entry is a pair of strings, the first being the connection's sink, |
| the second being the connection's source. Valid names for sources and |
| sinks are the codec's pins, and the jacks on the board: |
| |
| Optional properties: |
| - ti,codec-clock-rate : The Codec Clock rate (in Hz) applied to the Codec. |
| - clocks : Reference to the master clock |
| - clock-names : The clock should be named "mclk" |
| - Either codec-clock-rate or the codec-clock reference has to be defined. If |
| the both are defined the driver attempts to set referenced clock to the |
| defined rate and takes the rate from the clock reference. |
| |
| Board connectors: |
| |
| * Headphone Jack |
| * Line Out |
| * Mic Jack |
| * Line In |
| |
| |
| Example: |
| |
| sound { |
| compatible = "ti,da830-evm-audio"; |
| ti,model = "DA830 EVM"; |
| ti,audio-codec = <&tlv320aic3x>; |
| ti,mcasp-controller = <&mcasp1>; |
| ti,codec-clock-rate = <12000000>; |
| ti,audio-routing = |
| "Headphone Jack", "HPLOUT", |
| "Headphone Jack", "HPROUT", |
| "Line Out", "LLOUT", |
| "Line Out", "RLOUT", |
| "MIC3L", "Mic Bias 2V", |
| "MIC3R", "Mic Bias 2V", |
| "Mic Bias 2V", "Mic Jack", |
| "LINE1L", "Line In", |
| "LINE2L", "Line In", |
| "LINE1R", "Line In", |
| "LINE2R", "Line In"; |
| }; |
