www/oldnews.html - third_party/toybox - Git at Google

 <html><head><title>toybox: old news</title>
 <!--#include file="header.html" -->

 <h2>Old News</h2>

 <p>This project <a href=http://lists.busybox.net/pipermail/busybox/2006-September/024794.html>started in 2006</a>, got mothballed in 2009
 <a href=http://landley.net/notes-2009.html#18-06-2009>for</a>
 <a href=http://landley.net/notes-2011.html#31-03-2011>various</a>
 <a href=http://landley.net/notes-2011.html#08-06-2011>reasons</a>
 (during which time I
 <a href=http://lists.busybox.net/pipermail/busybox/2010-March/071783.html>contributed</a>
 some toybox code and design ideas to busybox</a> but retained the copyrights to
 my work), then <a href=http://landley.net/notes-2011.html#13-11-2011>relaunched</a>
 under a 2-clause BSD license in 2011.
 The following news entries predate that relaunch:</p>

 <hr>
 <p><b>December 1, 2009</b> - <a href=downloads/toybox-0.1.0.tar.bz2>toybox-0.1.0</a> is out.</p>

 <p>This release is a couple build fixes and another bugfix to patch.</p>

 <hr>
 <p><b>April 17, 2009</b> - Another bugfix release,
 <a href=downloads/toybox-0.0.9.2.tar.bz2>toybox-0.0.9.2</a>, off by one allocation error in patch.</p>

 <p>(Darn fiddly command, innit?)</p>

 <hr>
 <p><b>March 29, 2009</b> - Released
 <a href=downloads/toybox-0.0.9.1.tar.bz2>toybox 0.0.9.1</a> which is a bugfix
 release for issues with the patch command.</p>

 <p>The project is currently on hold while the developers learn Lua and
 decide whether or not to port the whole thing to that language.
 (Also note: the mailing list moved.  See the links on the left.  You'll
 have to resubscribe.)</p>

 <hr>
 <p><b>January 29, 2009</b> - Released
 <a href=downloads/toybox-0.0.9.tar.bz2>toybox 0.0.9.tar.bz2</a> which is a minor packaging
 fix for 0.0.8.  (The previous release tarball contained a prebuilt x86-64
 kconfig/conf file, because the release script ran defconfig to
 pregenerate help.h, and didn't run make clean afterwards.)  The actual source
 code is identical to the previous release.</p>

 <hr>
 <p><b>January 20, 2009</b> - <a href=downloads/toybox-0.0.8.tar.bz2>toybox 0.0.8</a>
 adds the uname, cksum, and mkswapfs commands.</p>

 <p>This uname implementation is cross compile friendly: when built as a 32 bit
 binary on an x86_64 host, it reports "i686" to confuse autoconf less.</p>

 <p>This cksum has several extra command line options which can be used to
 produce different cksum variants based on the same crc32 algorithm.  For
 example, the broadcom "trx" image packaging uses a little endian crc,
 pre-inverted instead of post-inverted, and does not include the length.
 (Without these arguments, it produces the normal SUSv4 cksum output.)</p>

 <p>It also upgrades netcat with a server mode (-l option) and fixes several
 netcat bugs.  It also fixed multiple bugs in "patch", works around a
 reiserfs bug in cp, and oneit can reboot on exit more reliably.</p>

 <p><b>November 12, 2008</b> -
 <a href=downloads/toybox-0.0.7.tar.bz2>toybox 0.0.7</a>
 adds sort and tee commands, upgrades the internal option parsing logic and the
 test suite, and numerous bugfixes (bunzip, chroot, cat, patch).</p>

 <p><b>May 26, 2008</b> - <a href=downloads/toybox-0.0.6.tar.bz2>toybox 0.0.6</a>
 adds cat, rmdir, and seq.  Bugfixes to cp and a new -v option.  Updates mdev to
 work with the 2.6.25 kernel.  Updates patch to knows that a file dated
 1969-12-31 means it doesn't exist, and to fail if a file it needs to create
 already exists.  Command line option parsing can now handle things like "echo
 -nex" vs "echo -ne".  Several updates to the test suite (run scripts/test.sh),
 and some build fixes.</p>

 <p>
 <hr>
 <p><b>March 29, 2008</b> -
 Time to release <a href=downloads/toybox-0.0.5.tar.bz2>toybox 0.0.5</a>, with
 new commands cp and chvt and several bugfixes.</p>

 <p>More makefile targets: "make test" runs the test suite (which needs more test
 scripts), and make install/install_flat/uninstall/uninstall_flat calls
 make/install.sh (with options --long --symlink --force --uninstall depending
 on the context).</p>

 <p>Most of the work has been behind the scenes, namely a significant rewrite of
 the build logic so adding each new command consists of adding a single C file to
 the "toys" directory, eliminating the need to touch any other files.
 There are specially formatted comments at the top of the C file to generate
 the other files, see toys/hello.c for an example.  (See generated/README.txt
 and <a href=code.html>code.html</a> for details.)</p>

 <p><b>January 2, 2008</b> - And <a href=downloads/toybox-0.0.4.tar.bz2>toybox-0.0.4.tar.bz2</a> is out.
 The new applets this time around include basename, chroot, dirname, dmesg,
 help, mkfifo, netcat, patch, sha1sum, touch, and tty.</p>

 <p>Note that this "touch" includes -l to set the length, which can truncate
 a file or create a commpletely sparse file, good for filesystem images.</p>

 <p>Expect the next release in about 6 months.</p>

 <p><b>December 12, 2007</b> - Updated the list of implemented applications,
 put up a <a href=todo.txt>todo list</a> and <a href=code.html>infrastructure
 documentation</a>.  Expect another release towards the end of the month.</p>

 <p><b>June 18, 2007</b> - Put out
 <a href=downloads/toybox-0.0.3.tar.bz2>toybox-0.0.3.tar.bz2</a> since it's
 been too long since I did something like that.  This one implements
 catv, count, df, echo, false, oneit, pwd, sleep, sync, toysh, true, which,
 and yes (which is what "make defconfig" enables).  There are several other
 commands not enabled by defconfig, because they don't really work yet.</p>

 <p>Most of the general infrastructure's there now, although lots of tweaking
 and optimizing is still needed.  The test suite is skeletal and not entirely
 checked in yet, but I'm working on that.</p>

 <p>I don't have nearly as much time to work on this as I'd like, but I'm making
 a little progress.</p>

 <p><b>January 31, 2007</b> -
 Toybox <a href=downloads/toybox-0.0.2.tar.bz2>0.0.2 release</a>.
 Implements count, yes, pwd, echo, bzcat, catv, oneit, and an unfinished
 skeleton of mke2fs.  Adds argument parsing logic and bunzip code to library.
 Now configured with menuconfig.  Adds "make baseline" and "make bloatcheck"
 using Matt Mackall's bloat-o-meter, and scripts/showasm.</p>

 <p>Screwing up the web page a bit, adding an index bar along the side
 which doesn't properly connect up to anything yet.  (Busy implementing
 mke2fs and gene2fs.)</p>

 <p><b>October 30, 2006</b> -
 Toybox <a href=downloads/toybox-0.0.1.tar.bz2>0.0.1 release</a>.  Implements
 df, a skeletal toysh, and some library functions.  Proof of concept, really.</p>

 <p><b>September 7, 2006</b> -
 Project launched, first commit to mercurial archive.</p>

 <!--#include file="footer.html" -->
	<html><head><title>toybox: old news</title>
	<!--#include file="header.html" -->

	<h2>Old News</h2>

	<p>This project <a href=http://lists.busybox.net/pipermail/busybox/2006-September/024794.html>started in 2006</a>, got mothballed in 2009
	<a href=http://landley.net/notes-2009.html#18-06-2009>for</a>
	<a href=http://landley.net/notes-2011.html#31-03-2011>various</a>
	<a href=http://landley.net/notes-2011.html#08-06-2011>reasons</a>
	(during which time I
	<a href=http://lists.busybox.net/pipermail/busybox/2010-March/071783.html>contributed</a>
	some toybox code and design ideas to busybox</a> but retained the copyrights to
	my work), then <a href=http://landley.net/notes-2011.html#13-11-2011>relaunched</a>
	under a 2-clause BSD license in 2011.
	The following news entries predate that relaunch:</p>

	<hr>
	<p><b>December 1, 2009</b> - <a href=downloads/toybox-0.1.0.tar.bz2>toybox-0.1.0</a> is out.</p>

	<p>This release is a couple build fixes and another bugfix to patch.</p>

	<hr>
	<p><b>April 17, 2009</b> - Another bugfix release,
	<a href=downloads/toybox-0.0.9.2.tar.bz2>toybox-0.0.9.2</a>, off by one allocation error in patch.</p>

	<p>(Darn fiddly command, innit?)</p>

	<hr>
	<p><b>March 29, 2009</b> - Released
	<a href=downloads/toybox-0.0.9.1.tar.bz2>toybox 0.0.9.1</a> which is a bugfix
	release for issues with the patch command.</p>

	<p>The project is currently on hold while the developers learn Lua and
	decide whether or not to port the whole thing to that language.
	(Also note: the mailing list moved. See the links on the left. You'll
	have to resubscribe.)</p>

	<hr>
	<p><b>January 29, 2009</b> - Released
	<a href=downloads/toybox-0.0.9.tar.bz2>toybox 0.0.9.tar.bz2</a> which is a minor packaging
	fix for 0.0.8. (The previous release tarball contained a prebuilt x86-64
	kconfig/conf file, because the release script ran defconfig to
	pregenerate help.h, and didn't run make clean afterwards.) The actual source
	code is identical to the previous release.</p>

	<hr>
	<p><b>January 20, 2009</b> - <a href=downloads/toybox-0.0.8.tar.bz2>toybox 0.0.8</a>
	adds the uname, cksum, and mkswapfs commands.</p>

	<p>This uname implementation is cross compile friendly: when built as a 32 bit
	binary on an x86_64 host, it reports "i686" to confuse autoconf less.</p>

	<p>This cksum has several extra command line options which can be used to
	produce different cksum variants based on the same crc32 algorithm. For
	example, the broadcom "trx" image packaging uses a little endian crc,
	pre-inverted instead of post-inverted, and does not include the length.
	(Without these arguments, it produces the normal SUSv4 cksum output.)</p>

	<p>It also upgrades netcat with a server mode (-l option) and fixes several
	netcat bugs. It also fixed multiple bugs in "patch", works around a
	reiserfs bug in cp, and oneit can reboot on exit more reliably.</p>

	<p><b>November 12, 2008</b> -
	<a href=downloads/toybox-0.0.7.tar.bz2>toybox 0.0.7</a>
	adds sort and tee commands, upgrades the internal option parsing logic and the
	test suite, and numerous bugfixes (bunzip, chroot, cat, patch).</p>

	<p><b>May 26, 2008</b> - <a href=downloads/toybox-0.0.6.tar.bz2>toybox 0.0.6</a>
	adds cat, rmdir, and seq. Bugfixes to cp and a new -v option. Updates mdev to
	work with the 2.6.25 kernel. Updates patch to knows that a file dated
	1969-12-31 means it doesn't exist, and to fail if a file it needs to create
	already exists. Command line option parsing can now handle things like "echo
	-nex" vs "echo -ne". Several updates to the test suite (run scripts/test.sh),
	and some build fixes.</p>

	<p>
	<hr>
	<p><b>March 29, 2008</b> -
	Time to release <a href=downloads/toybox-0.0.5.tar.bz2>toybox 0.0.5</a>, with
	new commands cp and chvt and several bugfixes.</p>

	<p>More makefile targets: "make test" runs the test suite (which needs more test
	scripts), and make install/install_flat/uninstall/uninstall_flat calls
	make/install.sh (with options --long --symlink --force --uninstall depending
	on the context).</p>

	<p>Most of the work has been behind the scenes, namely a significant rewrite of
	the build logic so adding each new command consists of adding a single C file to
	the "toys" directory, eliminating the need to touch any other files.
	There are specially formatted comments at the top of the C file to generate
	the other files, see toys/hello.c for an example. (See generated/README.txt
	and <a href=code.html>code.html</a> for details.)</p>

	<p><b>January 2, 2008</b> - And <a href=downloads/toybox-0.0.4.tar.bz2>toybox-0.0.4.tar.bz2</a> is out.
	The new applets this time around include basename, chroot, dirname, dmesg,
	help, mkfifo, netcat, patch, sha1sum, touch, and tty.</p>

	<p>Note that this "touch" includes -l to set the length, which can truncate
	a file or create a commpletely sparse file, good for filesystem images.</p>

	<p>Expect the next release in about 6 months.</p>

	<p><b>December 12, 2007</b> - Updated the list of implemented applications,
	put up a <a href=todo.txt>todo list</a> and <a href=code.html>infrastructure
	documentation</a>. Expect another release towards the end of the month.</p>

	<p><b>June 18, 2007</b> - Put out
	<a href=downloads/toybox-0.0.3.tar.bz2>toybox-0.0.3.tar.bz2</a> since it's
	been too long since I did something like that. This one implements
	catv, count, df, echo, false, oneit, pwd, sleep, sync, toysh, true, which,
	and yes (which is what "make defconfig" enables). There are several other
	commands not enabled by defconfig, because they don't really work yet.</p>

	<p>Most of the general infrastructure's there now, although lots of tweaking
	and optimizing is still needed. The test suite is skeletal and not entirely
	checked in yet, but I'm working on that.</p>

	<p>I don't have nearly as much time to work on this as I'd like, but I'm making
	a little progress.</p>

	<p><b>January 31, 2007</b> -
	Toybox <a href=downloads/toybox-0.0.2.tar.bz2>0.0.2 release</a>.
	Implements count, yes, pwd, echo, bzcat, catv, oneit, and an unfinished
	skeleton of mke2fs. Adds argument parsing logic and bunzip code to library.
	Now configured with menuconfig. Adds "make baseline" and "make bloatcheck"
	using Matt Mackall's bloat-o-meter, and scripts/showasm.</p>

	<p>Screwing up the web page a bit, adding an index bar along the side
	which doesn't properly connect up to anything yet. (Busy implementing
	mke2fs and gene2fs.)</p>

	<p><b>October 30, 2006</b> -
	Toybox <a href=downloads/toybox-0.0.1.tar.bz2>0.0.1 release</a>. Implements
	df, a skeletal toysh, and some library functions. Proof of concept, really.</p>

	<p><b>September 7, 2006</b> -
	Project launched, first commit to mercurial archive.</p>

	<!--#include file="footer.html" -->