| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/partitions/seama.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Seattle Image Partitions |
| |
| description: The SEAttle iMAge (SEAMA) partition is a type of partition |
| used for NAND flash devices. This type of flash image is found in some |
| D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, |
| DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 |
| (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This partition type |
| does not have children defined in the device tree, they need to be |
| detected by software. |
| |
| allOf: |
| - $ref: partition.yaml# |
| |
| maintainers: |
| - Linus Walleij <linus.walleij@linaro.org> |
| |
| properties: |
| compatible: |
| const: seama |
| |
| required: |
| - compatible |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| compatible = "seama"; |
| reg = <0x0 0x800000>; |
| label = "firmware"; |
| }; |
| }; |
