blob: 8fcda9b7454597dec300ae6addb6bcbc656efe7c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright 2021 NXP */
#include <dt-bindings/firmware/imx/rsrc.h>
#include <linux/arm-smccc.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/firmware.h>
#include <linux/firmware/imx/sci.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mailbox_client.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/remoteproc.h>
#include <linux/slab.h>
#include "imx_rproc.h"
#include "remoteproc_elf_helpers.h"
#include "remoteproc_internal.h"
#define DSP_RPROC_CLK_MAX 5
/*
* Module parameters
*/
static unsigned int no_mailboxes;
module_param_named(no_mailboxes, no_mailboxes, int, 0644);
MODULE_PARM_DESC(no_mailboxes,
"There is no mailbox between cores, so ignore remote proc reply after start, default is 0 (off).");
#define REMOTE_IS_READY BIT(0)
#define REMOTE_READY_WAIT_MAX_RETRIES 500
/* att flags */
/* DSP own area */
#define ATT_OWN BIT(31)
/* DSP instruction area */
#define ATT_IRAM BIT(30)
/* Definitions for i.MX8MP */
/* DAP registers */
#define IMX8M_DAP_DEBUG 0x28800000
#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
#define IMX8M_PWRCTL_CORERESET BIT(16)
/* DSP audio mix registers */
#define IMX8M_AudioDSP_REG0 0x100
#define IMX8M_AudioDSP_REG1 0x104
#define IMX8M_AudioDSP_REG2 0x108
#define IMX8M_AudioDSP_REG3 0x10c
#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
/* Definitions for i.MX8ULP */
#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
/*
* enum - Predefined Mailbox Messages
*
* @RP_MBOX_SUSPEND_SYSTEM: system suspend request for the remote processor
*
* @RP_MBOX_SUSPEND_ACK: successful response from remote processor for a
* suspend request
*
* @RP_MBOX_RESUME_SYSTEM: system resume request for the remote processor
*
* @RP_MBOX_RESUME_ACK: successful response from remote processor for a
* resume request
*/
enum imx_dsp_rp_mbox_messages {
RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
RP_MBOX_SUSPEND_ACK = 0xFF12,
RP_MBOX_RESUME_SYSTEM = 0xFF13,
RP_MBOX_RESUME_ACK = 0xFF14,
};
/**
* struct imx_dsp_rproc - DSP remote processor state
* @regmap: regmap handler
* @rproc: rproc handler
* @dsp_dcfg: device configuration pointer
* @clks: clocks needed by this device
* @cl: mailbox client to request the mailbox channel
* @cl_rxdb: mailbox client to request the mailbox channel for doorbell
* @tx_ch: mailbox tx channel handle
* @rx_ch: mailbox rx channel handle
* @rxdb_ch: mailbox rx doorbell channel handle
* @pd_dev: power domain device
* @pd_dev_link: power domain device link
* @ipc_handle: System Control Unit ipc handle
* @rproc_work: work for processing virtio interrupts
* @pm_comp: completion primitive to sync for suspend response
* @num_domains: power domain number
* @flags: control flags
*/
struct imx_dsp_rproc {
struct regmap *regmap;
struct rproc *rproc;
const struct imx_dsp_rproc_dcfg *dsp_dcfg;
struct clk_bulk_data clks[DSP_RPROC_CLK_MAX];
struct mbox_client cl;
struct mbox_client cl_rxdb;
struct mbox_chan *tx_ch;
struct mbox_chan *rx_ch;
struct mbox_chan *rxdb_ch;
struct device **pd_dev;
struct device_link **pd_dev_link;
struct imx_sc_ipc *ipc_handle;
struct work_struct rproc_work;
struct completion pm_comp;
int num_domains;
u32 flags;
};
/**
* struct imx_dsp_rproc_dcfg - DSP remote processor configuration
* @dcfg: imx_rproc_dcfg handler
* @reset: reset callback function
*/
struct imx_dsp_rproc_dcfg {
const struct imx_rproc_dcfg *dcfg;
int (*reset)(struct imx_dsp_rproc *priv);
};
static const struct imx_rproc_att imx_dsp_rproc_att_imx8qm[] = {
/* dev addr , sys addr , size , flags */
{ 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
{ 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
{ 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
{ 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
/* DDR (Data) */
{ 0x80000000, 0x80000000, 0x60000000, 0},
};
static const struct imx_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
/* dev addr , sys addr , size , flags */
{ 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
{ 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
{ 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
{ 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
/* DDR (Data) */
{ 0x80000000, 0x80000000, 0x60000000, 0},
};
static const struct imx_rproc_att imx_dsp_rproc_att_imx8mp[] = {
/* dev addr , sys addr , size , flags */
{ 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
{ 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
{ 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
{ 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
/* DDR (Data) */
{ 0x40000000, 0x40000000, 0x80000000, 0},
};
static const struct imx_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
/* dev addr , sys addr , size , flags */
{ 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
{ 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
/* DDR (Data) */
{ 0x0c000000, 0x80000000, 0x10000000, 0},
{ 0x30000000, 0x90000000, 0x10000000, 0},
};
/* Initialize the mailboxes between cores, if exists */
static int (*imx_dsp_rproc_mbox_init)(struct imx_dsp_rproc *priv);
/* Reset function for DSP on i.MX8MP */
static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
{
void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
int pwrctl;
/* Put DSP into reset and stall */
pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
pwrctl |= IMX8M_PWRCTL_CORERESET;
writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
/* Keep reset asserted for 10 cycles */
usleep_range(1, 2);
regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
IMX8M_AudioDSP_REG2_RUNSTALL,
IMX8M_AudioDSP_REG2_RUNSTALL);
/* Take the DSP out of reset and keep stalled for FW loading */
pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
pwrctl &= ~IMX8M_PWRCTL_CORERESET;
writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
iounmap(dap);
return 0;
}
/* Reset function for DSP on i.MX8ULP */
static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
{
struct arm_smccc_res res;
/* Put DSP into reset and stall */
regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
IMX8ULP_SYSCTRL0_DSP_STALL,
IMX8ULP_SYSCTRL0_DSP_STALL);
/* Configure resources of DSP through TFA */
arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
/* Take the DSP out of reset and keep stalled for FW loading */
regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
IMX8ULP_SYSCTRL0_DSP_RST, 0);
regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
return 0;
}
/* Specific configuration for i.MX8MP */
static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
.src_reg = IMX8M_AudioDSP_REG2,
.src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
.src_start = 0,
.src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
.att = imx_dsp_rproc_att_imx8mp,
.att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
.method = IMX_RPROC_MMIO,
};
static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
.dcfg = &dsp_rproc_cfg_imx8mp,
.reset = imx8mp_dsp_reset,
};
/* Specific configuration for i.MX8ULP */
static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8ulp = {
.src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
.src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
.src_start = 0,
.src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
.att = imx_dsp_rproc_att_imx8ulp,
.att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
.method = IMX_RPROC_MMIO,
};
static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
.dcfg = &dsp_rproc_cfg_imx8ulp,
.reset = imx8ulp_dsp_reset,
};
/* Specific configuration for i.MX8QXP */
static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qxp = {
.att = imx_dsp_rproc_att_imx8qxp,
.att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
.method = IMX_RPROC_SCU_API,
};
static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
.dcfg = &dsp_rproc_cfg_imx8qxp,
};
/* Specific configuration for i.MX8QM */
static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qm = {
.att = imx_dsp_rproc_att_imx8qm,
.att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
.method = IMX_RPROC_SCU_API,
};
static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
.dcfg = &dsp_rproc_cfg_imx8qm,
};
static int imx_dsp_rproc_ready(struct rproc *rproc)
{
struct imx_dsp_rproc *priv = rproc->priv;
int i;
if (!priv->rxdb_ch)
return 0;
for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
if (priv->flags & REMOTE_IS_READY)
return 0;
usleep_range(100, 200);
}
return -ETIMEDOUT;
}
/*
* Start function for rproc_ops
*
* There is a handshake for start procedure: when DSP starts, it
* will send a doorbell message to this driver, then the
* REMOTE_IS_READY flags is set, then driver will kick
* a message to DSP.
*/
static int imx_dsp_rproc_start(struct rproc *rproc)
{
struct imx_dsp_rproc *priv = rproc->priv;
const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
struct device *dev = rproc->dev.parent;
int ret;
switch (dcfg->method) {
case IMX_RPROC_MMIO:
ret = regmap_update_bits(priv->regmap,
dcfg->src_reg,
dcfg->src_mask,
dcfg->src_start);
break;
case IMX_RPROC_SCU_API:
ret = imx_sc_pm_cpu_start(priv->ipc_handle,
IMX_SC_R_DSP,
true,
rproc->bootaddr);
break;
default:
return -EOPNOTSUPP;
}
if (ret)
dev_err(dev, "Failed to enable remote core!\n");
else
ret = imx_dsp_rproc_ready(rproc);
return ret;
}
/*
* Stop function for rproc_ops
* It clears the REMOTE_IS_READY flags
*/
static int imx_dsp_rproc_stop(struct rproc *rproc)
{
struct imx_dsp_rproc *priv = rproc->priv;
const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
struct device *dev = rproc->dev.parent;
int ret = 0;
if (rproc->state == RPROC_CRASHED) {
priv->flags &= ~REMOTE_IS_READY;
return 0;
}
switch (dcfg->method) {
case IMX_RPROC_MMIO:
ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
dcfg->src_stop);
break;
case IMX_RPROC_SCU_API:
ret = imx_sc_pm_cpu_start(priv->ipc_handle,
IMX_SC_R_DSP,
false,
rproc->bootaddr);
break;
default:
return -EOPNOTSUPP;
}
if (ret)
dev_err(dev, "Failed to stop remote core\n");
else
priv->flags &= ~REMOTE_IS_READY;
return ret;
}
/**
* imx_dsp_rproc_sys_to_da() - internal memory translation helper
* @priv: private data pointer
* @sys: system address (DDR address)
* @len: length of the memory buffer
* @da: device address to translate
*
* Convert system address (DDR address) to device address (DSP)
* for there may be memory remap for device.
*/
static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
size_t len, u64 *da)
{
const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
int i;
/* Parse address translation table */
for (i = 0; i < dcfg->att_size; i++) {
const struct imx_rproc_att *att = &dcfg->att[i];
if (sys >= att->sa && sys + len <= att->sa + att->size) {
unsigned int offset = sys - att->sa;
*da = att->da + offset;
return 0;
}
}
return -ENOENT;
}
/* Main virtqueue message work function
*
* This function is executed upon scheduling of the i.MX DSP remoteproc
* driver's workqueue. The workqueue is scheduled by the mailbox rx
* handler.
*
* This work function processes both the Tx and Rx virtqueue indices on
* every invocation. The rproc_vq_interrupt function can detect if there
* are new unprocessed messages or not (returns IRQ_NONE vs IRQ_HANDLED),
* but there is no need to check for these return values. The index 0
* triggering will process all pending Rx buffers, and the index 1 triggering
* will process all newly available Tx buffers and will wakeup any potentially
* blocked senders.
*
* NOTE:
* The current logic is based on an inherent design assumption of supporting
* only 2 vrings, but this can be changed if needed.
*/
static void imx_dsp_rproc_vq_work(struct work_struct *work)
{
struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
rproc_work);
struct rproc *rproc = priv->rproc;
mutex_lock(&rproc->lock);
if (rproc->state != RPROC_RUNNING)
goto unlock_mutex;
rproc_vq_interrupt(priv->rproc, 0);
rproc_vq_interrupt(priv->rproc, 1);
unlock_mutex:
mutex_unlock(&rproc->lock);
}
/**
* imx_dsp_rproc_rx_tx_callback() - inbound mailbox message handler
* @cl: mailbox client pointer used for requesting the mailbox channel
* @data: mailbox payload
*
* This handler is invoked by mailbox driver whenever a mailbox
* message is received. Usually, the SUSPEND and RESUME related messages
* are handled in this function, other messages are handled by remoteproc core
*/
static void imx_dsp_rproc_rx_tx_callback(struct mbox_client *cl, void *data)
{
struct rproc *rproc = dev_get_drvdata(cl->dev);
struct imx_dsp_rproc *priv = rproc->priv;
struct device *dev = rproc->dev.parent;
u32 message = (u32)(*(u32 *)data);
dev_dbg(dev, "mbox msg: 0x%x\n", message);
switch (message) {
case RP_MBOX_SUSPEND_ACK:
complete(&priv->pm_comp);
break;
case RP_MBOX_RESUME_ACK:
complete(&priv->pm_comp);
break;
default:
schedule_work(&priv->rproc_work);
break;
}
}
/**
* imx_dsp_rproc_rxdb_callback() - inbound mailbox message handler
* @cl: mailbox client pointer used for requesting the mailbox channel
* @data: mailbox payload
*
* For doorbell, there is no message specified, just set REMOTE_IS_READY
* flag.
*/
static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *data)
{
struct rproc *rproc = dev_get_drvdata(cl->dev);
struct imx_dsp_rproc *priv = rproc->priv;
/* Remote is ready after firmware is loaded and running */
priv->flags |= REMOTE_IS_READY;
}
/**
* imx_dsp_rproc_mbox_alloc() - request mailbox channels
* @priv: private data pointer
*
* Request three mailbox channels (tx, rx, rxdb).
*/
static int imx_dsp_rproc_mbox_alloc(struct imx_dsp_rproc *priv)
{
struct device *dev = priv->rproc->dev.parent;
struct mbox_client *cl;
int ret;
if (!of_get_property(dev->of_node, "mbox-names", NULL))
return 0;
cl = &priv->cl;
cl->dev = dev;
cl->tx_block = true;
cl->tx_tout = 100;
cl->knows_txdone = false;
cl->rx_callback = imx_dsp_rproc_rx_tx_callback;
/* Channel for sending message */
priv->tx_ch = mbox_request_channel_byname(cl, "tx");
if (IS_ERR(priv->tx_ch)) {
ret = PTR_ERR(priv->tx_ch);
dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
ret);
return ret;
}
/* Channel for receiving message */
priv->rx_ch = mbox_request_channel_byname(cl, "rx");
if (IS_ERR(priv->rx_ch)) {
ret = PTR_ERR(priv->rx_ch);
dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
ret);
goto free_channel_tx;
}
cl = &priv->cl_rxdb;
cl->dev = dev;
cl->rx_callback = imx_dsp_rproc_rxdb_callback;
/*
* RX door bell is used to receive the ready signal from remote
* after firmware loaded.
*/
priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
if (IS_ERR(priv->rxdb_ch)) {
ret = PTR_ERR(priv->rxdb_ch);
dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
ret);
goto free_channel_rx;
}
return 0;
free_channel_rx:
mbox_free_channel(priv->rx_ch);
free_channel_tx:
mbox_free_channel(priv->tx_ch);
return ret;
}
/*
* imx_dsp_rproc_mbox_no_alloc()
*
* Empty function for no mailbox between cores
*
* Always return 0
*/
static int imx_dsp_rproc_mbox_no_alloc(struct imx_dsp_rproc *priv)
{
return 0;
}
static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
{
mbox_free_channel(priv->tx_ch);
mbox_free_channel(priv->rx_ch);
mbox_free_channel(priv->rxdb_ch);
}
/**
* imx_dsp_rproc_add_carveout() - request mailbox channels
* @priv: private data pointer
*
* This function registers specified memory entry in @rproc carveouts list
* The carveouts can help to mapping the memory address for DSP.
*/
static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
{
const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
struct rproc *rproc = priv->rproc;
struct device *dev = rproc->dev.parent;
struct device_node *np = dev->of_node;
struct of_phandle_iterator it;
struct rproc_mem_entry *mem;
struct reserved_mem *rmem;
void __iomem *cpu_addr;
int a;
u64 da;
/* Remap required addresses */
for (a = 0; a < dcfg->att_size; a++) {
const struct imx_rproc_att *att = &dcfg->att[a];
if (!(att->flags & ATT_OWN))
continue;
if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
return -EINVAL;
cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
if (!cpu_addr) {
dev_err(dev, "failed to map memory %p\n", &att->sa);
return -ENOMEM;
}
/* Register memory region */
mem = rproc_mem_entry_init(dev, (void __force *)cpu_addr, (dma_addr_t)att->sa,
att->size, da, NULL, NULL, "dsp_mem");
if (mem)
rproc_coredump_add_segment(rproc, da, att->size);
else
return -ENOMEM;
rproc_add_carveout(rproc, mem);
}
of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
while (of_phandle_iterator_next(&it) == 0) {
/*
* Ignore the first memory region which will be used vdev buffer.
* No need to do extra handlings, rproc_add_virtio_dev will handle it.
*/
if (!strcmp(it.node->name, "vdev0buffer"))
continue;
rmem = of_reserved_mem_lookup(it.node);
if (!rmem) {
of_node_put(it.node);
dev_err(dev, "unable to acquire memory-region\n");
return -EINVAL;
}
if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da)) {
of_node_put(it.node);
return -EINVAL;
}
cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
if (!cpu_addr) {
of_node_put(it.node);
dev_err(dev, "failed to map memory %p\n", &rmem->base);
return -ENOMEM;
}
/* Register memory region */
mem = rproc_mem_entry_init(dev, (void __force *)cpu_addr, (dma_addr_t)rmem->base,
rmem->size, da, NULL, NULL, it.node->name);
if (mem) {
rproc_coredump_add_segment(rproc, da, rmem->size);
} else {
of_node_put(it.node);
return -ENOMEM;
}
rproc_add_carveout(rproc, mem);
}
return 0;
}
/* Prepare function for rproc_ops */
static int imx_dsp_rproc_prepare(struct rproc *rproc)
{
struct imx_dsp_rproc *priv = rproc->priv;
struct device *dev = rproc->dev.parent;
struct rproc_mem_entry *carveout;
int ret;
ret = imx_dsp_rproc_add_carveout(priv);
if (ret) {
dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
return ret;
}
pm_runtime_get_sync(dev);
/*
* Clear buffers after pm rumtime for internal ocram is not
* accessible if power and clock are not enabled.
*/
list_for_each_entry(carveout, &rproc->carveouts, node) {
if (carveout->va)
memset(carveout->va, 0, carveout->len);
}
return 0;
}
/* Unprepare function for rproc_ops */
static int imx_dsp_rproc_unprepare(struct rproc *rproc)
{
pm_runtime_put_sync(rproc->dev.parent);
return 0;
}
/* Kick function for rproc_ops */
static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
{
struct imx_dsp_rproc *priv = rproc->priv;
struct device *dev = rproc->dev.parent;
int err;
__u32 mmsg;
if (!priv->tx_ch) {
dev_err(dev, "No initialized mbox tx channel\n");
return;
}
/*
* Send the index of the triggered virtqueue as the mu payload.
* Let remote processor know which virtqueue is used.
*/
mmsg = vqid;
err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
if (err < 0)
dev_err(dev, "%s: failed (%d, err:%d)\n", __func__, vqid, err);
}
/*
* Custom memory copy implementation for i.MX DSP Cores
*
* The IRAM is part of the HiFi DSP.
* According to hw specs only 32-bits writes are allowed.
*/
static int imx_dsp_rproc_memcpy(void *dst, const void *src, size_t size)
{
void __iomem *dest = (void __iomem *)dst;
const u8 *src_byte = src;
const u32 *source = src;
u32 affected_mask;
int i, q, r;
u32 tmp;
/* destination must be 32bit aligned */
if (!IS_ALIGNED((uintptr_t)dest, 4))
return -EINVAL;
q = size / 4;
r = size % 4;
/* copy data in units of 32 bits at a time */
for (i = 0; i < q; i++)
writel(source[i], dest + i * 4);
if (r) {
affected_mask = GENMASK(8 * r, 0);
/*
* first read the 32bit data of dest, then change affected
* bytes, and write back to dest.
* For unaffected bytes, it should not be changed
*/
tmp = readl(dest + q * 4);
tmp &= ~affected_mask;
/* avoid reading after end of source */
for (i = 0; i < r; i++)
tmp |= (src_byte[q * 4 + i] << (8 * i));
writel(tmp, dest + q * 4);
}
return 0;
}
/*
* Custom memset implementation for i.MX DSP Cores
*
* The IRAM is part of the HiFi DSP.
* According to hw specs only 32-bits writes are allowed.
*/
static int imx_dsp_rproc_memset(void *addr, u8 value, size_t size)
{
void __iomem *tmp_dst = (void __iomem *)addr;
u32 tmp_val = value;
u32 affected_mask;
int q, r;
u32 tmp;
/* destination must be 32bit aligned */
if (!IS_ALIGNED((uintptr_t)addr, 4))
return -EINVAL;
tmp_val |= tmp_val << 8;
tmp_val |= tmp_val << 16;
q = size / 4;
r = size % 4;
while (q--)
writel(tmp_val, tmp_dst++);
if (r) {
affected_mask = GENMASK(8 * r, 0);
/*
* first read the 32bit data of addr, then change affected
* bytes, and write back to addr.
* For unaffected bytes, it should not be changed
*/
tmp = readl(tmp_dst);
tmp &= ~affected_mask;
tmp |= (tmp_val & affected_mask);
writel(tmp, tmp_dst);
}
return 0;
}
/*
* imx_dsp_rproc_elf_load_segments() - load firmware segments to memory
* @rproc: remote processor which will be booted using these fw segments
* @fw: the ELF firmware image
*
* This function loads the firmware segments to memory, where the remote
* processor expects them.
*
* Return: 0 on success and an appropriate error code otherwise
*/
static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
{
struct device *dev = &rproc->dev;
const void *ehdr, *phdr;
int i, ret = 0;
u16 phnum;
const u8 *elf_data = fw->data;
u8 class = fw_elf_get_class(fw);
u32 elf_phdr_get_size = elf_size_of_phdr(class);
ehdr = elf_data;
phnum = elf_hdr_get_e_phnum(class, ehdr);
phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
/* go through the available ELF segments */
for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
u64 da = elf_phdr_get_p_paddr(class, phdr);
u64 memsz = elf_phdr_get_p_memsz(class, phdr);
u64 filesz = elf_phdr_get_p_filesz(class, phdr);
u64 offset = elf_phdr_get_p_offset(class, phdr);
u32 type = elf_phdr_get_p_type(class, phdr);
void *ptr;
if (type != PT_LOAD || !memsz)
continue;
dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
type, da, memsz, filesz);
if (filesz > memsz) {
dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
filesz, memsz);
ret = -EINVAL;
break;
}
if (offset + filesz > fw->size) {
dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
offset + filesz, fw->size);
ret = -EINVAL;
break;
}
if (!rproc_u64_fit_in_size_t(memsz)) {
dev_err(dev, "size (%llx) does not fit in size_t type\n",
memsz);
ret = -EOVERFLOW;
break;
}
/* grab the kernel address for this device address */
ptr = rproc_da_to_va(rproc, da, memsz, NULL);
if (!ptr) {
dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
memsz);
ret = -EINVAL;
break;
}
/* put the segment where the remote processor expects it */
if (filesz) {
ret = imx_dsp_rproc_memcpy(ptr, elf_data + offset, filesz);
if (ret) {
dev_err(dev, "memory copy failed for da 0x%llx memsz 0x%llx\n",
da, memsz);
break;
}
}
/* zero out remaining memory for this segment */
if (memsz > filesz) {
ret = imx_dsp_rproc_memset(ptr + filesz, 0, memsz - filesz);
if (ret) {
dev_err(dev, "memset failed for da 0x%llx memsz 0x%llx\n",
da, memsz);
break;
}
}
}
return ret;
}
static int imx_dsp_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
{
if (rproc_elf_load_rsc_table(rproc, fw))
dev_warn(&rproc->dev, "no resource table found for this firmware\n");
return 0;
}
static const struct rproc_ops imx_dsp_rproc_ops = {
.prepare = imx_dsp_rproc_prepare,
.unprepare = imx_dsp_rproc_unprepare,
.start = imx_dsp_rproc_start,
.stop = imx_dsp_rproc_stop,
.kick = imx_dsp_rproc_kick,
.load = imx_dsp_rproc_elf_load_segments,
.parse_fw = imx_dsp_rproc_parse_fw,
.sanity_check = rproc_elf_sanity_check,
.get_boot_addr = rproc_elf_get_boot_addr,
};
/**
* imx_dsp_attach_pm_domains() - attach the power domains
* @priv: private data pointer
*
* On i.MX8QM and i.MX8QXP there is multiple power domains
* required, so need to link them.
*/
static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
{
struct device *dev = priv->rproc->dev.parent;
int ret, i;
priv->num_domains = of_count_phandle_with_args(dev->of_node,
"power-domains",
"#power-domain-cells");
/* If only one domain, then no need to link the device */
if (priv->num_domains <= 1)
return 0;
priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
sizeof(*priv->pd_dev),
GFP_KERNEL);
if (!priv->pd_dev)
return -ENOMEM;
priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
sizeof(*priv->pd_dev_link),
GFP_KERNEL);
if (!priv->pd_dev_link)
return -ENOMEM;
for (i = 0; i < priv->num_domains; i++) {
priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
if (IS_ERR(priv->pd_dev[i])) {
ret = PTR_ERR(priv->pd_dev[i]);
goto detach_pm;
}
/*
* device_link_add will check priv->pd_dev[i], if it is
* NULL, then will break.
*/
priv->pd_dev_link[i] = device_link_add(dev,
priv->pd_dev[i],
DL_FLAG_STATELESS |
DL_FLAG_PM_RUNTIME);
if (!priv->pd_dev_link[i]) {
dev_pm_domain_detach(priv->pd_dev[i], false);
ret = -EINVAL;
goto detach_pm;
}
}
return 0;
detach_pm:
while (--i >= 0) {
device_link_del(priv->pd_dev_link[i]);
dev_pm_domain_detach(priv->pd_dev[i], false);
}
return ret;
}
static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
{
int i;
if (priv->num_domains <= 1)
return 0;
for (i = 0; i < priv->num_domains; i++) {
device_link_del(priv->pd_dev_link[i]);
dev_pm_domain_detach(priv->pd_dev[i], false);
}
return 0;
}
/**
* imx_dsp_rproc_detect_mode() - detect DSP control mode
* @priv: private data pointer
*
* Different platform has different control method for DSP, which depends
* on how the DSP is integrated in platform.
*
* For i.MX8QXP and i.MX8QM, DSP should be started and stopped by System
* Control Unit.
* For i.MX8MP and i.MX8ULP, DSP should be started and stopped by system
* integration module.
*/
static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
{
const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
struct device *dev = priv->rproc->dev.parent;
struct regmap *regmap;
int ret = 0;
switch (dsp_dcfg->dcfg->method) {
case IMX_RPROC_SCU_API:
ret = imx_scu_get_handle(&priv->ipc_handle);
if (ret)
return ret;
break;
case IMX_RPROC_MMIO:
regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
if (IS_ERR(regmap)) {
dev_err(dev, "failed to find syscon\n");
return PTR_ERR(regmap);
}
priv->regmap = regmap;
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
/* DSP clocks */
"core", "ocram", "debug", "ipg", "mu",
};
static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
{
struct device *dev = priv->rproc->dev.parent;
struct clk_bulk_data *clks = priv->clks;
int i;
for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
clks[i].id = imx_dsp_clks_names[i];
return devm_clk_bulk_get_optional(dev, DSP_RPROC_CLK_MAX, clks);
}
static int imx_dsp_rproc_probe(struct platform_device *pdev)
{
const struct imx_dsp_rproc_dcfg *dsp_dcfg;
struct device *dev = &pdev->dev;
struct imx_dsp_rproc *priv;
struct rproc *rproc;
const char *fw_name;
int ret;
dsp_dcfg = of_device_get_match_data(dev);
if (!dsp_dcfg)
return -ENODEV;
ret = rproc_of_parse_firmware(dev, 0, &fw_name);
if (ret) {
dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
ret);
return ret;
}
rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
sizeof(*priv));
if (!rproc)
return -ENOMEM;
priv = rproc->priv;
priv->rproc = rproc;
priv->dsp_dcfg = dsp_dcfg;
if (no_mailboxes)
imx_dsp_rproc_mbox_init = imx_dsp_rproc_mbox_no_alloc;
else
imx_dsp_rproc_mbox_init = imx_dsp_rproc_mbox_alloc;
dev_set_drvdata(dev, rproc);
INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
ret = imx_dsp_rproc_detect_mode(priv);
if (ret) {
dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
goto err_put_rproc;
}
/* There are multiple power domains required by DSP on some platform */
ret = imx_dsp_attach_pm_domains(priv);
if (ret) {
dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
goto err_put_rproc;
}
/* Get clocks */
ret = imx_dsp_rproc_clk_get(priv);
if (ret) {
dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
goto err_detach_domains;
}
init_completion(&priv->pm_comp);
rproc->auto_boot = false;
ret = rproc_add(rproc);
if (ret) {
dev_err(dev, "rproc_add failed\n");
goto err_detach_domains;
}
pm_runtime_enable(dev);
return 0;
err_detach_domains:
imx_dsp_detach_pm_domains(priv);
err_put_rproc:
rproc_free(rproc);
return ret;
}
static void imx_dsp_rproc_remove(struct platform_device *pdev)
{
struct rproc *rproc = platform_get_drvdata(pdev);
struct imx_dsp_rproc *priv = rproc->priv;
pm_runtime_disable(&pdev->dev);
rproc_del(rproc);
imx_dsp_detach_pm_domains(priv);
rproc_free(rproc);
}
/* pm runtime functions */
static int imx_dsp_runtime_resume(struct device *dev)
{
struct rproc *rproc = dev_get_drvdata(dev);
struct imx_dsp_rproc *priv = rproc->priv;
const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
int ret;
/*
* There is power domain attached with mailbox, if setup mailbox
* in probe(), then the power of mailbox is always enabled,
* the power can't be saved.
* So move setup of mailbox to runtime resume.
*/
ret = imx_dsp_rproc_mbox_init(priv);
if (ret) {
dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
return ret;
}
ret = clk_bulk_prepare_enable(DSP_RPROC_CLK_MAX, priv->clks);
if (ret) {
dev_err(dev, "failed on clk_bulk_prepare_enable\n");
return ret;
}
/* Reset DSP if needed */
if (dsp_dcfg->reset)
dsp_dcfg->reset(priv);
return 0;
}
static int imx_dsp_runtime_suspend(struct device *dev)
{
struct rproc *rproc = dev_get_drvdata(dev);
struct imx_dsp_rproc *priv = rproc->priv;
clk_bulk_disable_unprepare(DSP_RPROC_CLK_MAX, priv->clks);
imx_dsp_rproc_free_mbox(priv);
return 0;
}
static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
{
struct rproc *rproc = context;
int ret;
/*
* Same flow as start procedure.
* Load the ELF segments to memory firstly.
*/
ret = rproc_load_segments(rproc, fw);
if (ret)
goto out;
/* Start the remote processor */
ret = rproc->ops->start(rproc);
if (ret)
goto out;
rproc->ops->kick(rproc, 0);
out:
release_firmware(fw);
}
static int imx_dsp_suspend(struct device *dev)
{
struct rproc *rproc = dev_get_drvdata(dev);
struct imx_dsp_rproc *priv = rproc->priv;
__u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
int ret;
if (rproc->state != RPROC_RUNNING)
goto out;
reinit_completion(&priv->pm_comp);
/* Tell DSP that suspend is happening */
ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
if (ret < 0) {
dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
return ret;
}
/*
* DSP need to save the context at suspend.
* Here waiting the response for DSP, then power can be disabled.
*/
if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
return -EBUSY;
out:
/*
* The power of DSP is disabled in suspend, so force pm runtime
* to be suspend, then we can reenable the power and clocks at
* resume stage.
*/
return pm_runtime_force_suspend(dev);
}
static int imx_dsp_resume(struct device *dev)
{
struct rproc *rproc = dev_get_drvdata(dev);
int ret = 0;
ret = pm_runtime_force_resume(dev);
if (ret)
return ret;
if (rproc->state != RPROC_RUNNING)
return 0;
/*
* The power of DSP is disabled at suspend, the memory of dsp
* is reset, the image segments are lost. So need to reload
* firmware and restart the DSP if it is in running state.
*/
ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
rproc->firmware, dev, GFP_KERNEL,
rproc, imx_dsp_load_firmware);
if (ret < 0) {
dev_err(dev, "load firmware failed: %d\n", ret);
goto err;
}
return 0;
err:
pm_runtime_force_suspend(dev);
return ret;
}
static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
RUNTIME_PM_OPS(imx_dsp_runtime_suspend, imx_dsp_runtime_resume, NULL)
};
static const struct of_device_id imx_dsp_rproc_of_match[] = {
{ .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
{ .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
{ .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
{ .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
{},
};
MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
static struct platform_driver imx_dsp_rproc_driver = {
.probe = imx_dsp_rproc_probe,
.remove_new = imx_dsp_rproc_remove,
.driver = {
.name = "imx-dsp-rproc",
.of_match_table = imx_dsp_rproc_of_match,
.pm = pm_ptr(&imx_dsp_rproc_pm_ops),
},
};
module_platform_driver(imx_dsp_rproc_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");