blob: d40f96250691082cf83b17bbb62c33f208b22213 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 1999 - 2008 Intel Corporation. */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "ixgb.h"
/* This is the only thing that needs to be changed to adjust the
* maximum number of ports that the driver can manage.
*/
#define IXGB_MAX_NIC 8
#define OPTION_UNSET -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED 1
/* All parameters are treated the same, as an integer array of values.
* This macro just reduces the need to repeat the same declaration code
* over and over (plus this helps to avoid typo bugs).
*/
#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
#define IXGB_PARAM(X, desc) \
static int X[IXGB_MAX_NIC+1] \
= IXGB_PARAM_INIT; \
static unsigned int num_##X = 0; \
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
/* Transmit Descriptor Count
*
* Valid Range: 64-4096
*
* Default Value: 256
*/
IXGB_PARAM(TxDescriptors, "Number of transmit descriptors");
/* Receive Descriptor Count
*
* Valid Range: 64-4096
*
* Default Value: 1024
*/
IXGB_PARAM(RxDescriptors, "Number of receive descriptors");
/* User Specified Flow Control Override
*
* Valid Range: 0-3
* - 0 - No Flow Control
* - 1 - Rx only, respond to PAUSE frames but do not generate them
* - 2 - Tx only, generate PAUSE frames but ignore them on receive
* - 3 - Full Flow Control Support
*
* Default Value: 2 - Tx only (silicon bug avoidance)
*/
IXGB_PARAM(FlowControl, "Flow Control setting");
/* XsumRX - Receive Checksum Offload Enable/Disable
*
* Valid Range: 0, 1
* - 0 - disables all checksum offload
* - 1 - enables receive IP/TCP/UDP checksum offload
* on 82597 based NICs
*
* Default Value: 1
*/
IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
/* Transmit Interrupt Delay in units of 0.8192 microseconds
*
* Valid Range: 0-65535
*
* Default Value: 32
*/
IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay");
/* Receive Interrupt Delay in units of 0.8192 microseconds
*
* Valid Range: 0-65535
*
* Default Value: 72
*/
IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay");
/* Receive Flow control high threshold (when we send a pause frame)
* (FCRTH)
*
* Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity)
*
* Default Value: 196,608 (0x30000)
*/
IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold");
/* Receive Flow control low threshold (when we send a resume frame)
* (FCRTL)
*
* Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity)
* must be less than high threshold by at least 8 bytes
*
* Default Value: 163,840 (0x28000)
*/
IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold");
/* Flow control request timeout (how long to pause the link partner's tx)
* (PAP 15:0)
*
* Valid Range: 1 - 65535
*
* Default Value: 65535 (0xffff) (we'll send an xon if we recover)
*/
IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout");
/* Interrupt Delay Enable
*
* Valid Range: 0, 1
*
* - 0 - disables transmit interrupt delay
* - 1 - enables transmmit interrupt delay
*
* Default Value: 1
*/
IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable");
#define DEFAULT_TIDV 32
#define MAX_TIDV 0xFFFF
#define MIN_TIDV 0
#define DEFAULT_RDTR 72
#define MAX_RDTR 0xFFFF
#define MIN_RDTR 0
#define DEFAULT_FCRTL 0x28000
#define DEFAULT_FCRTH 0x30000
#define MIN_FCRTL 0
#define MAX_FCRTL 0x3FFE8
#define MIN_FCRTH 8
#define MAX_FCRTH 0x3FFF0
#define MIN_FCPAUSE 1
#define MAX_FCPAUSE 0xffff
#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */
struct ixgb_option {
enum { enable_option, range_option, list_option } type;
const char *name;
const char *err;
int def;
union {
struct { /* range_option info */
int min;
int max;
} r;
struct { /* list_option info */
int nr;
const struct ixgb_opt_list {
int i;
const char *str;
} *p;
} l;
} arg;
};
static int
ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
return 0;
}
switch (opt->type) {
case enable_option:
switch (*value) {
case OPTION_ENABLED:
pr_info("%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
pr_info("%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
pr_info("%s set to %i\n", opt->name, *value);
return 0;
}
break;
case list_option: {
int i;
const struct ixgb_opt_list *ent;
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
pr_info("%s\n", ent->str);
return 0;
}
}
}
break;
default:
BUG();
}
pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
/**
* ixgb_check_options - Range Checking for Command Line Parameters
* @adapter: board private structure
*
* This routine checks all command line parameters for valid user
* input. If an invalid value is given, or if no user specified
* value exists, a default value is used. The final value is stored
* in a variable in the adapter structure.
**/
void
ixgb_check_options(struct ixgb_adapter *adapter)
{
int bd = adapter->bd_number;
if (bd >= IXGB_MAX_NIC) {
pr_notice("Warning: no configuration for board #%i\n", bd);
pr_notice("Using defaults for all values\n");
}
{ /* Transmit Descriptor Count */
static const struct ixgb_option opt = {
.type = range_option,
.name = "Transmit Descriptors",
.err = "using default of " __MODULE_STRING(DEFAULT_TXD),
.def = DEFAULT_TXD,
.arg = { .r = { .min = MIN_TXD,
.max = MAX_TXD}}
};
struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
if (num_TxDescriptors > bd) {
tx_ring->count = TxDescriptors[bd];
ixgb_validate_option(&tx_ring->count, &opt);
} else {
tx_ring->count = opt.def;
}
tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Descriptor Count */
static const struct ixgb_option opt = {
.type = range_option,
.name = "Receive Descriptors",
.err = "using default of " __MODULE_STRING(DEFAULT_RXD),
.def = DEFAULT_RXD,
.arg = { .r = { .min = MIN_RXD,
.max = MAX_RXD}}
};
struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
if (num_RxDescriptors > bd) {
rx_ring->count = RxDescriptors[bd];
ixgb_validate_option(&rx_ring->count, &opt);
} else {
rx_ring->count = opt.def;
}
rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Checksum Offload Enable */
static const struct ixgb_option opt = {
.type = enable_option,
.name = "Receive Checksum Offload",
.err = "defaulting to Enabled",
.def = OPTION_ENABLED
};
if (num_XsumRX > bd) {
unsigned int rx_csum = XsumRX[bd];
ixgb_validate_option(&rx_csum, &opt);
adapter->rx_csum = rx_csum;
} else {
adapter->rx_csum = opt.def;
}
}
{ /* Flow Control */
static const struct ixgb_opt_list fc_list[] = {
{ ixgb_fc_none, "Flow Control Disabled" },
{ ixgb_fc_rx_pause, "Flow Control Receive Only" },
{ ixgb_fc_tx_pause, "Flow Control Transmit Only" },
{ ixgb_fc_full, "Flow Control Enabled" },
{ ixgb_fc_default, "Flow Control Hardware Default" }
};
static const struct ixgb_option opt = {
.type = list_option,
.name = "Flow Control",
.err = "reading default settings from EEPROM",
.def = ixgb_fc_tx_pause,
.arg = { .l = { .nr = ARRAY_SIZE(fc_list),
.p = fc_list }}
};
if (num_FlowControl > bd) {
unsigned int fc = FlowControl[bd];
ixgb_validate_option(&fc, &opt);
adapter->hw.fc.type = fc;
} else {
adapter->hw.fc.type = opt.def;
}
}
{ /* Receive Flow Control High Threshold */
static const struct ixgb_option opt = {
.type = range_option,
.name = "Rx Flow Control High Threshold",
.err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
.def = DEFAULT_FCRTH,
.arg = { .r = { .min = MIN_FCRTH,
.max = MAX_FCRTH}}
};
if (num_RxFCHighThresh > bd) {
adapter->hw.fc.high_water = RxFCHighThresh[bd];
ixgb_validate_option(&adapter->hw.fc.high_water, &opt);
} else {
adapter->hw.fc.high_water = opt.def;
}
if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
pr_info("Ignoring RxFCHighThresh when no RxFC\n");
}
{ /* Receive Flow Control Low Threshold */
static const struct ixgb_option opt = {
.type = range_option,
.name = "Rx Flow Control Low Threshold",
.err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
.def = DEFAULT_FCRTL,
.arg = { .r = { .min = MIN_FCRTL,
.max = MAX_FCRTL}}
};
if (num_RxFCLowThresh > bd) {
adapter->hw.fc.low_water = RxFCLowThresh[bd];
ixgb_validate_option(&adapter->hw.fc.low_water, &opt);
} else {
adapter->hw.fc.low_water = opt.def;
}
if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
pr_info("Ignoring RxFCLowThresh when no RxFC\n");
}
{ /* Flow Control Pause Time Request*/
static const struct ixgb_option opt = {
.type = range_option,
.name = "Flow Control Pause Time Request",
.err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
.def = DEFAULT_FCPAUSE,
.arg = { .r = { .min = MIN_FCPAUSE,
.max = MAX_FCPAUSE}}
};
if (num_FCReqTimeout > bd) {
unsigned int pause_time = FCReqTimeout[bd];
ixgb_validate_option(&pause_time, &opt);
adapter->hw.fc.pause_time = pause_time;
} else {
adapter->hw.fc.pause_time = opt.def;
}
if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
pr_info("Ignoring FCReqTimeout when no RxFC\n");
}
/* high low and spacing check for rx flow control thresholds */
if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
/* high must be greater than low */
if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
/* set defaults */
pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
adapter->hw.fc.high_water = DEFAULT_FCRTH;
adapter->hw.fc.low_water = DEFAULT_FCRTL;
}
}
{ /* Receive Interrupt Delay */
static const struct ixgb_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
.err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
.def = DEFAULT_RDTR,
.arg = { .r = { .min = MIN_RDTR,
.max = MAX_RDTR}}
};
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
ixgb_validate_option(&adapter->rx_int_delay, &opt);
} else {
adapter->rx_int_delay = opt.def;
}
}
{ /* Transmit Interrupt Delay */
static const struct ixgb_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
.err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
.def = DEFAULT_TIDV,
.arg = { .r = { .min = MIN_TIDV,
.max = MAX_TIDV}}
};
if (num_TxIntDelay > bd) {
adapter->tx_int_delay = TxIntDelay[bd];
ixgb_validate_option(&adapter->tx_int_delay, &opt);
} else {
adapter->tx_int_delay = opt.def;
}
}
{ /* Transmit Interrupt Delay Enable */
static const struct ixgb_option opt = {
.type = enable_option,
.name = "Tx Interrupt Delay Enable",
.err = "defaulting to Enabled",
.def = OPTION_ENABLED
};
if (num_IntDelayEnable > bd) {
unsigned int ide = IntDelayEnable[bd];
ixgb_validate_option(&ide, &opt);
adapter->tx_int_delay_enable = ide;
} else {
adapter->tx_int_delay_enable = opt.def;
}
}
}