blob: c2fda80fe1cce53f4488d67aebe744bbe4cc38f9 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/* Atlantic Network Driver
* Copyright (C) 2020 Marvell International Ltd.
*/
#ifndef _MACSEC_STRUCT_H_
#define _MACSEC_STRUCT_H_
/*! Represents the bitfields of a single row in the Egress CTL Filter
* table.
*/
struct aq_mss_egress_ctlf_record {
/*! This is used to store the 48 bit value used to compare SA, DA or
* halfDA+half SA value.
*/
u32 sa_da[2];
/*! This is used to store the 16 bit ethertype value used for
* comparison.
*/
u32 eth_type;
/*! The match mask is per-nibble. 0 means don't care, i.e. every value
* will match successfully. The total data is 64 bit, i.e. 16 nibbles
* masks.
*/
u32 match_mask;
/*! 0: No compare, i.e. This entry is not used
* 1: compare DA only
* 2: compare SA only
* 3: compare half DA + half SA
* 4: compare ether type only
* 5: compare DA + ethertype
* 6: compare SA + ethertype
* 7: compare DA+ range.
*/
u32 match_type;
/*! 0: Bypass the remaining modules if matched.
* 1: Forward to next module for more classifications.
*/
u32 action;
};
/*! Represents the bitfields of a single row in the Egress Packet
* Classifier table.
*/
struct aq_mss_egress_class_record {
/*! VLAN ID field. */
u32 vlan_id;
/*! VLAN UP field. */
u32 vlan_up;
/*! VLAN Present in the Packet. */
u32 vlan_valid;
/*! The 8 bit value used to compare with extracted value for byte 3. */
u32 byte3;
/*! The 8 bit value used to compare with extracted value for byte 2. */
u32 byte2;
/*! The 8 bit value used to compare with extracted value for byte 1. */
u32 byte1;
/*! The 8 bit value used to compare with extracted value for byte 0. */
u32 byte0;
/*! The 8 bit TCI field used to compare with extracted value. */
u32 tci;
/*! The 64 bit SCI field in the SecTAG. */
u32 sci[2];
/*! The 16 bit Ethertype (in the clear) field used to compare with
* extracted value.
*/
u32 eth_type;
/*! This is to specify the 40bit SNAP header if the SNAP header's mask
* is enabled.
*/
u32 snap[2];
/*! This is to specify the 24bit LLC header if the LLC header's mask is
* enabled.
*/
u32 llc;
/*! The 48 bit MAC_SA field used to compare with extracted value. */
u32 mac_sa[2];
/*! The 48 bit MAC_DA field used to compare with extracted value. */
u32 mac_da[2];
/*! The 32 bit Packet number used to compare with extracted value. */
u32 pn;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte3_location;
/*! 0: don't care
* 1: enable comparison of extracted byte pointed by byte 3 location.
*/
u32 byte3_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte2_location;
/*! 0: don't care
* 1: enable comparison of extracted byte pointed by byte 2 location.
*/
u32 byte2_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte1_location;
/*! 0: don't care
* 1: enable comparison of extracted byte pointed by byte 1 location.
*/
u32 byte1_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte0_location;
/*! 0: don't care
* 1: enable comparison of extracted byte pointed by byte 0 location.
*/
u32 byte0_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of extracted VLAN ID field.
*/
u32 vlan_id_mask;
/*! 0: don't care
* 1: enable comparison of extracted VLAN UP field.
*/
u32 vlan_up_mask;
/*! 0: don't care
* 1: enable comparison of extracted VLAN Valid field.
*/
u32 vlan_valid_mask;
/*! This is bit mask to enable comparison the 8 bit TCI field,
* including the AN field.
* For explicit SECTAG, AN is hardware controlled. For sending
* packet w/ explicit SECTAG, rest of the TCI fields are directly
* from the SECTAG.
*/
u32 tci_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of SCI
* Note: If this field is not 0, this means the input packet's
* SECTAG is explicitly tagged and MACSEC module will only update
* the MSDU.
* PN number is hardware controlled.
*/
u32 sci_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of Ethertype.
*/
u32 eth_type_mask;
/*! Mask is per-byte.
* 0: don't care and no SNAP header exist.
* 1: compare the SNAP header.
* If this bit is set to 1, the extracted filed will assume the
* SNAP header exist as encapsulated in 802.3 (RFC 1042). I.E. the
* next 5 bytes after the LLC header is SNAP header.
*/
u32 snap_mask;
/*! 0: don't care and no LLC header exist.
* 1: compare the LLC header.
* If this bit is set to 1, the extracted filed will assume the
* LLC header exist as encapsulated in 802.3 (RFC 1042). I.E. the
* next three bytes after the 802.3MAC header is LLC header.
*/
u32 llc_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of MAC_SA.
*/
u32 sa_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of MAC_DA.
*/
u32 da_mask;
/*! Mask is per-byte. */
u32 pn_mask;
/*! Reserved. This bit should be always 0. */
u32 eight02dot2;
/*! 1: For explicit sectag case use TCI_SC from table
* 0: use TCI_SC from explicit sectag.
*/
u32 tci_sc;
/*! 1: For explicit sectag case,use TCI_V,ES,SCB,E,C from table
* 0: use TCI_V,ES,SCB,E,C from explicit sectag.
*/
u32 tci_87543;
/*! 1: indicates that incoming packet has explicit sectag. */
u32 exp_sectag_en;
/*! If packet matches and tagged as controlled-packet, this SC/SA
* index is used for later SC and SA table lookup.
*/
u32 sc_idx;
/*! This field is used to specify how many SA entries are
* associated with 1 SC entry.
* 2'b00: 1 SC has 4 SA.
* SC index is equivalent to {SC_Index[4:2], 1'b0}.
* SA index is equivalent to {SC_Index[4:2], SC entry's current AN[1:0]
* 2'b10: 1 SC has 2 SA.
* SC index is equivalent to SC_Index[4:1]
* SA index is equivalent to {SC_Index[4:1], SC entry's current AN[0]}
* 2'b11: 1 SC has 1 SA. No SC entry exists for the specific SA.
* SA index is equivalent to SC_Index[4:0]
* Note: if specified as 2'b11, hardware AN roll over is not
* supported.
*/
u32 sc_sa;
/*! 0: the packets will be sent to MAC FIFO
* 1: The packets will be sent to Debug/Loopback FIFO.
* If the above's action is drop, this bit has no meaning.
*/
u32 debug;
/*! 0: forward to remaining modules
* 1: bypass the next encryption modules. This packet is considered
* un-control packet.
* 2: drop
* 3: Reserved.
*/
u32 action;
/*! 0: Not valid entry. This entry is not used
* 1: valid entry.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Egress SC Lookup table. */
struct aq_mss_egress_sc_record {
/*! This is to specify when the SC was first used. Set by HW. */
u32 start_time;
/*! This is to specify when the SC was last used. Set by HW. */
u32 stop_time;
/*! This is to specify which of the SA entries are used by current HW.
* Note: This value need to be set by SW after reset. It will be
* automatically updated by HW, if AN roll over is enabled.
*/
u32 curr_an;
/*! 0: Clear the SA Valid Bit after PN expiry.
* 1: Do not Clear the SA Valid bit after PN expiry of the current SA.
* When the Enable AN roll over is set, S/W does not need to
* program the new SA's and the H/W will automatically roll over
* between the SA's without session expiry.
* For normal operation, Enable AN Roll over will be set to '0'
* and in which case, the SW needs to program the new SA values
* after the current PN expires.
*/
u32 an_roll;
/*! This is the TCI field used if packet is not explicitly tagged. */
u32 tci;
/*! This value indicates the offset where the decryption will start.
* [[Values of 0, 4, 8-50].
*/
u32 enc_off;
/*! 0: Do not protect frames, all the packets will be forwarded
* unchanged. MIB counter (OutPktsUntagged) will be updated.
* 1: Protect.
*/
u32 protect;
/*! 0: when none of the SA related to SC has inUse set.
* 1: when either of the SA related to the SC has inUse set.
* This bit is set by HW.
*/
u32 recv;
/*! 0: H/W Clears this bit on the first use.
* 1: SW updates this entry, when programming the SC Table.
*/
u32 fresh;
/*! AES Key size
* 00 - 128bits
* 01 - 192bits
* 10 - 256bits
* 11 - Reserved.
*/
u32 sak_len;
/*! 0: Invalid SC
* 1: Valid SC.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Egress SA Lookup table. */
struct aq_mss_egress_sa_record {
/*! This is to specify when the SC was first used. Set by HW. */
u32 start_time;
/*! This is to specify when the SC was last used. Set by HW. */
u32 stop_time;
/*! This is set by SW and updated by HW to store the Next PN number
* used for encryption.
*/
u32 next_pn;
/*! The Next_PN number is going to wrapped around from 0xFFFF_FFFF
* to 0. set by HW.
*/
u32 sat_pn;
/*! 0: This SA is in use.
* 1: This SA is Fresh and set by SW.
*/
u32 fresh;
/*! 0: Invalid SA
* 1: Valid SA.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Egress SA Key
* Lookup table.
*/
struct aq_mss_egress_sakey_record {
/*! Key for AES-GCM processing. */
u32 key[8];
};
/*! Represents the bitfields of a single row in the Ingress Pre-MACSec
* CTL Filter table.
*/
struct aq_mss_ingress_prectlf_record {
/*! This is used to store the 48 bit value used to compare SA, DA
* or halfDA+half SA value.
*/
u32 sa_da[2];
/*! This is used to store the 16 bit ethertype value used for
* comparison.
*/
u32 eth_type;
/*! The match mask is per-nibble. 0 means don't care, i.e. every
* value will match successfully. The total data is 64 bit, i.e.
* 16 nibbles masks.
*/
u32 match_mask;
/*! 0: No compare, i.e. This entry is not used
* 1: compare DA only
* 2: compare SA only
* 3: compare half DA + half SA
* 4: compare ether type only
* 5: compare DA + ethertype
* 6: compare SA + ethertype
* 7: compare DA+ range.
*/
u32 match_type;
/*! 0: Bypass the remaining modules if matched.
* 1: Forward to next module for more classifications.
*/
u32 action;
};
/*! Represents the bitfields of a single row in the Ingress Pre-MACSec
* Packet Classifier table.
*/
struct aq_mss_ingress_preclass_record {
/*! The 64 bit SCI field used to compare with extracted value.
* Should have SCI value in case TCI[SCI_SEND] == 0. This will be
* used for ICV calculation.
*/
u32 sci[2];
/*! The 8 bit TCI field used to compare with extracted value. */
u32 tci;
/*! 8 bit encryption offset. */
u32 encr_offset;
/*! The 16 bit Ethertype (in the clear) field used to compare with
* extracted value.
*/
u32 eth_type;
/*! This is to specify the 40bit SNAP header if the SNAP header's
* mask is enabled.
*/
u32 snap[2];
/*! This is to specify the 24bit LLC header if the LLC header's
* mask is enabled.
*/
u32 llc;
/*! The 48 bit MAC_SA field used to compare with extracted value. */
u32 mac_sa[2];
/*! The 48 bit MAC_DA field used to compare with extracted value. */
u32 mac_da[2];
/*! 0: this is to compare with non-LPBK packet
* 1: this is to compare with LPBK packet.
* This value is used to compare with a controlled-tag which goes
* with the packet when looped back from Egress port.
*/
u32 lpbk_packet;
/*! The value of this bit mask will affects how the SC index and SA
* index created.
* 2'b00: 1 SC has 4 SA.
* SC index is equivalent to {SC_Index[4:2], 1'b0}.
* SA index is equivalent to {SC_Index[4:2], SECTAG's AN[1:0]}
* Here AN bits are not compared.
* 2'b10: 1 SC has 2 SA.
* SC index is equivalent to SC_Index[4:1]
* SA index is equivalent to {SC_Index[4:1], SECTAG's AN[0]}
* Compare AN[1] field only
* 2'b11: 1 SC has 1 SA. No SC entry exists for the specific SA.
* SA index is equivalent to SC_Index[4:0]
* AN[1:0] bits are compared.
* NOTE: This design is to supports different usage of AN. User
* can either ping-pong buffer 2 SA by using only the AN[0] bit.
* Or use 4 SA per SC by use AN[1:0] bits. Or even treat each SA
* as independent. i.e. AN[1:0] is just another matching pointer
* to select SA.
*/
u32 an_mask;
/*! This is bit mask to enable comparison the upper 6 bits TCI
* field, which does not include the AN field.
* 0: don't compare
* 1: enable comparison of the bits.
*/
u32 tci_mask;
/*! 0: don't care
* 1: enable comparison of SCI.
*/
u32 sci_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of Ethertype.
*/
u32 eth_type_mask;
/*! Mask is per-byte.
* 0: don't care and no SNAP header exist.
* 1: compare the SNAP header.
* If this bit is set to 1, the extracted filed will assume the
* SNAP header exist as encapsulated in 802.3 (RFC 1042). I.E. the
* next 5 bytes after the LLC header is SNAP header.
*/
u32 snap_mask;
/*! Mask is per-byte.
* 0: don't care and no LLC header exist.
* 1: compare the LLC header.
* If this bit is set to 1, the extracted filed will assume the
* LLC header exist as encapsulated in 802.3 (RFC 1042). I.E. the
* next three bytes after the 802.3MAC header is LLC header.
*/
u32 llc_mask;
/*! Reserved. This bit should be always 0. */
u32 _802_2_encapsulate;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of MAC_SA.
*/
u32 sa_mask;
/*! Mask is per-byte.
* 0: don't care
* 1: enable comparison of MAC_DA.
*/
u32 da_mask;
/*! 0: don't care
* 1: enable checking if this is loopback packet or not.
*/
u32 lpbk_mask;
/*! If packet matches and tagged as controlled-packet. This SC/SA
* index is used for later SC and SA table lookup.
*/
u32 sc_idx;
/*! 0: the packets will be sent to MAC FIFO
* 1: The packets will be sent to Debug/Loopback FIFO.
* If the above's action is drop. This bit has no meaning.
*/
u32 proc_dest;
/*! 0: Process: Forward to next two modules for 802.1AE decryption.
* 1: Process but keep SECTAG: Forward to next two modules for
* 802.1AE decryption but keep the MACSEC header with added error
* code information. ICV will be stripped for all control packets.
* 2: Bypass: Bypass the next two decryption modules but processed
* by post-classification.
* 3: Drop: drop this packet and update counts accordingly.
*/
u32 action;
/*! 0: This is a controlled-port packet if matched.
* 1: This is an uncontrolled-port packet if matched.
*/
u32 ctrl_unctrl;
/*! Use the SCI value from the Table if 'SC' bit of the input
* packet is not present.
*/
u32 sci_from_table;
/*! Reserved. */
u32 reserved;
/*! 0: Not valid entry. This entry is not used
* 1: valid entry.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Ingress SC Lookup table. */
struct aq_mss_ingress_sc_record {
/*! This is to specify when the SC was first used. Set by HW. */
u32 stop_time;
/*! This is to specify when the SC was first used. Set by HW. */
u32 start_time;
/*! 0: Strict
* 1: Check
* 2: Disabled.
*/
u32 validate_frames;
/*! 1: Replay control enabled.
* 0: replay control disabled.
*/
u32 replay_protect;
/*! This is to specify the window range for anti-replay. Default is 0.
* 0: is strict order enforcement.
*/
u32 anti_replay_window;
/*! 0: when none of the SA related to SC has inUse set.
* 1: when either of the SA related to the SC has inUse set.
* This bit is set by HW.
*/
u32 receiving;
/*! 0: when hardware processed the SC for the first time, it clears
* this bit
* 1: This bit is set by SW, when it sets up the SC.
*/
u32 fresh;
/*! 0: The AN number will not automatically roll over if Next_PN is
* saturated.
* 1: The AN number will automatically roll over if Next_PN is
* saturated.
* Rollover is valid only after expiry. Normal roll over between
* SA's should be normal process.
*/
u32 an_rol;
/*! Reserved. */
u32 reserved;
/*! 0: Invalid SC
* 1: Valid SC.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Ingress SA Lookup table. */
struct aq_mss_ingress_sa_record {
/*! This is to specify when the SC was first used. Set by HW. */
u32 stop_time;
/*! This is to specify when the SC was first used. Set by HW. */
u32 start_time;
/*! This is updated by HW to store the expected NextPN number for
* anti-replay.
*/
u32 next_pn;
/*! The Next_PN number is going to wrapped around from 0XFFFF_FFFF
* to 0. set by HW.
*/
u32 sat_nextpn;
/*! 0: This SA is not yet used.
* 1: This SA is inUse.
*/
u32 in_use;
/*! 0: when hardware processed the SC for the first time, it clears
* this timer
* 1: This bit is set by SW, when it sets up the SC.
*/
u32 fresh;
/*! Reserved. */
u32 reserved;
/*! 0: Invalid SA.
* 1: Valid SA.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Ingress SA Key
* Lookup table.
*/
struct aq_mss_ingress_sakey_record {
/*! Key for AES-GCM processing. */
u32 key[8];
/*! AES key size
* 00 - 128bits
* 01 - 192bits
* 10 - 256bits
* 11 - reserved.
*/
u32 key_len;
};
/*! Represents the bitfields of a single row in the Ingress Post-
* MACSec Packet Classifier table.
*/
struct aq_mss_ingress_postclass_record {
/*! The 8 bit value used to compare with extracted value for byte 0. */
u32 byte0;
/*! The 8 bit value used to compare with extracted value for byte 1. */
u32 byte1;
/*! The 8 bit value used to compare with extracted value for byte 2. */
u32 byte2;
/*! The 8 bit value used to compare with extracted value for byte 3. */
u32 byte3;
/*! Ethertype in the packet. */
u32 eth_type;
/*! Ether Type value > 1500 (0x5dc). */
u32 eth_type_valid;
/*! VLAN ID after parsing. */
u32 vlan_id;
/*! VLAN priority after parsing. */
u32 vlan_up;
/*! Valid VLAN coding. */
u32 vlan_valid;
/*! SA index. */
u32 sai;
/*! SAI hit, i.e. controlled packet. */
u32 sai_hit;
/*! Mask for payload ethertype field. */
u32 eth_type_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte3_location;
/*! Mask for Byte Offset 3. */
u32 byte3_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte2_location;
/*! Mask for Byte Offset 2. */
u32 byte2_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte1_location;
/*! Mask for Byte Offset 1. */
u32 byte1_mask;
/*! 0~63: byte location used extracted by packets comparator, which
* can be anything from the first 64 bytes of the MAC packets.
* This byte location counted from MAC' DA address. i.e. set to 0
* will point to byte 0 of DA address.
*/
u32 byte0_location;
/*! Mask for Byte Offset 0. */
u32 byte0_mask;
/*! Mask for Ethertype valid field. Indicates 802.3 vs. Other. */
u32 eth_type_valid_mask;
/*! Mask for VLAN ID field. */
u32 vlan_id_mask;
/*! Mask for VLAN UP field. */
u32 vlan_up_mask;
/*! Mask for VLAN valid field. */
u32 vlan_valid_mask;
/*! Mask for SAI. */
u32 sai_mask;
/*! Mask for SAI_HIT. */
u32 sai_hit_mask;
/*! Action if only first level matches and second level does not.
* 0: pass
* 1: drop (fail).
*/
u32 firstlevel_actions;
/*! Action if both first and second level matched.
* 0: pass
* 1: drop (fail).
*/
u32 secondlevel_actions;
/*! Reserved. */
u32 reserved;
/*! 0: Not valid entry. This entry is not used
* 1: valid entry.
*/
u32 valid;
};
/*! Represents the bitfields of a single row in the Ingress Post-
* MACSec CTL Filter table.
*/
struct aq_mss_ingress_postctlf_record {
/*! This is used to store the 48 bit value used to compare SA, DA
* or halfDA+half SA value.
*/
u32 sa_da[2];
/*! This is used to store the 16 bit ethertype value used for
* comparison.
*/
u32 eth_type;
/*! The match mask is per-nibble. 0 means don't care, i.e. every
* value will match successfully. The total data is 64 bit, i.e.
* 16 nibbles masks.
*/
u32 match_mask;
/*! 0: No compare, i.e. This entry is not used
* 1: compare DA only
* 2: compare SA only
* 3: compare half DA + half SA
* 4: compare ether type only
* 5: compare DA + ethertype
* 6: compare SA + ethertype
* 7: compare DA+ range.
*/
u32 match_type;
/*! 0: Bypass the remaining modules if matched.
* 1: Forward to next module for more classifications.
*/
u32 action;
};
/*! Represents the Egress MIB counters for a single SC. Counters are
* 64 bits, lower 32 bits in field[0].
*/
struct aq_mss_egress_sc_counters {
/*! The number of integrity protected but not encrypted packets
* for this transmitting SC.
*/
u32 sc_protected_pkts[2];
/*! The number of integrity protected and encrypted packets for
* this transmitting SC.
*/
u32 sc_encrypted_pkts[2];
/*! The number of plain text octets that are integrity protected
* but not encrypted on the transmitting SC.
*/
u32 sc_protected_octets[2];
/*! The number of plain text octets that are integrity protected
* and encrypted on the transmitting SC.
*/
u32 sc_encrypted_octets[2];
};
/*! Represents the Egress MIB counters for a single SA. Counters are
* 64 bits, lower 32 bits in field[0].
*/
struct aq_mss_egress_sa_counters {
/*! The number of dropped packets for this transmitting SA. */
u32 sa_hit_drop_redirect[2];
/*! TODO */
u32 sa_protected2_pkts[2];
/*! The number of integrity protected but not encrypted packets
* for this transmitting SA.
*/
u32 sa_protected_pkts[2];
/*! The number of integrity protected and encrypted packets for
* this transmitting SA.
*/
u32 sa_encrypted_pkts[2];
};
/*! Represents the common Egress MIB counters; the counter not
* associated with a particular SC/SA. Counters are 64 bits, lower 32
* bits in field[0].
*/
struct aq_mss_egress_common_counters {
/*! The number of transmitted packets classified as MAC_CTL packets. */
u32 ctl_pkt[2];
/*! The number of transmitted packets that did not match any rows
* in the Egress Packet Classifier table.
*/
u32 unknown_sa_pkts[2];
/*! The number of transmitted packets where the SC table entry has
* protect=0 (so packets are forwarded unchanged).
*/
u32 untagged_pkts[2];
/*! The number of transmitted packets discarded because the packet
* length is greater than the ifMtu of the Common Port interface.
*/
u32 too_long[2];
/*! The number of transmitted packets for which table memory was
* affected by an ECC error during processing.
*/
u32 ecc_error_pkts[2];
/*! The number of transmitted packets for where the matched row in
* the Egress Packet Classifier table has action=drop.
*/
u32 unctrl_hit_drop_redir[2];
};
/*! Represents the Ingress MIB counters for a single SA. Counters are
* 64 bits, lower 32 bits in field[0].
*/
struct aq_mss_ingress_sa_counters {
/*! For this SA, the number of received packets without a SecTAG. */
u32 untagged_hit_pkts[2];
/*! For this SA, the number of received packets that were dropped. */
u32 ctrl_hit_drop_redir_pkts[2];
/*! For this SA which is not currently in use, the number of
* received packets that have been discarded, and have either the
* packets encrypted or the matched row in the Ingress SC Lookup
* table has validate_frames=Strict.
*/
u32 not_using_sa[2];
/*! For this SA which is not currently in use, the number of
* received, unencrypted, packets with the matched row in the
* Ingress SC Lookup table has validate_frames!=Strict.
*/
u32 unused_sa[2];
/*! For this SA, the number discarded packets with the condition
* that the packets are not valid and one of the following
* conditions are true: either the matched row in the Ingress SC
* Lookup table has validate_frames=Strict or the packets
* encrypted.
*/
u32 not_valid_pkts[2];
/*! For this SA, the number of packets with the condition that the
* packets are not valid and the matched row in the Ingress SC
* Lookup table has validate_frames=Check.
*/
u32 invalid_pkts[2];
/*! For this SA, the number of validated packets. */
u32 ok_pkts[2];
/*! For this SC, the number of received packets that have been
* discarded with the condition: the matched row in the Ingress
* SC Lookup table has replay_protect=1 and the PN of the packet
* is lower than the lower bound replay check PN.
*/
u32 late_pkts[2];
/*! For this SA, the number of packets with the condition that the
* PN of the packets is lower than the lower bound replay
* protection PN.
*/
u32 delayed_pkts[2];
/*! For this SC, the number of packets with the following condition:
* - the matched row in the Ingress SC Lookup table has
* replay_protect=0 or
* - the matched row in the Ingress SC Lookup table has
* replay_protect=1 and the packet is not encrypted and the
* integrity check has failed or
* - the matched row in the Ingress SC Lookup table has
* replay_protect=1 and the packet is encrypted and integrity
* check has failed.
*/
u32 unchecked_pkts[2];
/*! The number of octets of plaintext recovered from received
* packets that were integrity protected but not encrypted.
*/
u32 validated_octets[2];
/*! The number of octets of plaintext recovered from received
* packets that were integrity protected and encrypted.
*/
u32 decrypted_octets[2];
};
/*! Represents the common Ingress MIB counters; the counter not
* associated with a particular SA. Counters are 64 bits, lower 32
* bits in field[0].
*/
struct aq_mss_ingress_common_counters {
/*! The number of received packets classified as MAC_CTL packets. */
u32 ctl_pkts[2];
/*! The number of received packets with the MAC security tag
* (SecTAG), not matching any rows in the Ingress Pre-MACSec
* Packet Classifier table.
*/
u32 tagged_miss_pkts[2];
/*! The number of received packets without the MAC security tag
* (SecTAG), not matching any rows in the Ingress Pre-MACSec
* Packet Classifier table.
*/
u32 untagged_miss_pkts[2];
/*! The number of received packets discarded without the MAC
* security tag (SecTAG) and with the matched row in the Ingress
* SC Lookup table having validate_frames=Strict.
*/
u32 notag_pkts[2];
/*! The number of received packets without the MAC security tag
* (SecTAG) and with the matched row in the Ingress SC Lookup
* table having validate_frames!=Strict.
*/
u32 untagged_pkts[2];
/*! The number of received packets discarded with an invalid
* SecTAG or a zero value PN or an invalid ICV.
*/
u32 bad_tag_pkts[2];
/*! The number of received packets discarded with unknown SCI
* information with the condition:
* the matched row in the Ingress SC Lookup table has
* validate_frames=Strict or the C bit in the SecTAG is set.
*/
u32 no_sci_pkts[2];
/*! The number of received packets with unknown SCI with the condition:
* The matched row in the Ingress SC Lookup table has
* validate_frames!=Strict and the C bit in the SecTAG is not set.
*/
u32 unknown_sci_pkts[2];
/*! The number of received packets by the controlled port service
* that passed the Ingress Post-MACSec Packet Classifier table
* check.
*/
u32 ctrl_prt_pass_pkts[2];
/*! The number of received packets by the uncontrolled port
* service that passed the Ingress Post-MACSec Packet Classifier
* table check.
*/
u32 unctrl_prt_pass_pkts[2];
/*! The number of received packets by the controlled port service
* that failed the Ingress Post-MACSec Packet Classifier table
* check.
*/
u32 ctrl_prt_fail_pkts[2];
/*! The number of received packets by the uncontrolled port
* service that failed the Ingress Post-MACSec Packet Classifier
* table check.
*/
u32 unctrl_prt_fail_pkts[2];
/*! The number of received packets discarded because the packet
* length is greater than the ifMtu of the Common Port interface.
*/
u32 too_long_pkts[2];
/*! The number of received packets classified as MAC_CTL by the
* Ingress Post-MACSec CTL Filter table.
*/
u32 igpoc_ctl_pkts[2];
/*! The number of received packets for which table memory was
* affected by an ECC error during processing.
*/
u32 ecc_error_pkts[2];
/*! The number of received packets by the uncontrolled port
* service that were dropped.
*/
u32 unctrl_hit_drop_redir[2];
};
#endif