blob: 5220d9cb16d88023ef600dace806d33698f23236 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Active-semi ACT8945A Charger Function
maintainers:
- Sebastian Reichel <sre@kernel.org>
allOf:
- $ref: power-supply.yaml#
properties:
compatible:
const: active-semi,act8945a-charger
interrupts:
maxItems: 1
active-semi,chglev-gpios:
maxItems: 1
description: charge current level GPIO
active-semi,lbo-gpios:
maxItems: 1
description: low battery voltage detect GPIO
active-semi,input-voltage-threshold-microvolt:
description: |
Specifies the charger's input over-voltage threshold value.
Despite the name, specified values are in millivolt (mV).
Defaults to 6.6 V
enum: [ 6600, 7000, 7500, 8000 ]
active-semi,precondition-timeout:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Specifies the charger's PRECONDITION safety timer setting value in minutes.
If 0, it means to disable this timer.
Defaults to 40 minutes.
enum: [ 0, 40, 60, 80 ]
active-semi,total-timeout:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Specifies the charger's total safety timer setting value in hours;
If 0, it means to disable this timer;
Defaults to 3 hours.
enum: [ 0, 3, 4, 5 ]
required:
- compatible
- interrupts
- active-semi,chglev-gpios
- active-semi,lbo-gpios
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
pmic {
charger {
compatible = "active-semi,act8945a-charger";
interrupt-parent = <&pioA>;
interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
};
};