| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2016-2017, National Instruments Corp. |
| * |
| * Author: Moritz Fischer <mdf@kernel.org> |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/of_address.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_irq.h> |
| #include <linux/skbuff.h> |
| #include <linux/phy.h> |
| #include <linux/mii.h> |
| #include <linux/nvmem-consumer.h> |
| #include <linux/ethtool.h> |
| #include <linux/iopoll.h> |
| |
| #define TX_BD_NUM 64 |
| #define RX_BD_NUM 128 |
| |
| /* Axi DMA Register definitions */ |
| #define XAXIDMA_TX_CR_OFFSET 0x00 /* Channel control */ |
| #define XAXIDMA_TX_SR_OFFSET 0x04 /* Status */ |
| #define XAXIDMA_TX_CDESC_OFFSET 0x08 /* Current descriptor pointer */ |
| #define XAXIDMA_TX_TDESC_OFFSET 0x10 /* Tail descriptor pointer */ |
| |
| #define XAXIDMA_RX_CR_OFFSET 0x30 /* Channel control */ |
| #define XAXIDMA_RX_SR_OFFSET 0x34 /* Status */ |
| #define XAXIDMA_RX_CDESC_OFFSET 0x38 /* Current descriptor pointer */ |
| #define XAXIDMA_RX_TDESC_OFFSET 0x40 /* Tail descriptor pointer */ |
| |
| #define XAXIDMA_CR_RUNSTOP_MASK 0x1 /* Start/stop DMA channel */ |
| #define XAXIDMA_CR_RESET_MASK 0x4 /* Reset DMA engine */ |
| |
| #define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */ |
| #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ |
| #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ |
| #define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ |
| |
| #define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ |
| #define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ |
| |
| #define XAXIDMA_DELAY_SHIFT 24 |
| #define XAXIDMA_COALESCE_SHIFT 16 |
| |
| #define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ |
| #define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ |
| #define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ |
| #define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ |
| |
| /* Default TX/RX Threshold and waitbound values for SGDMA mode */ |
| #define XAXIDMA_DFT_TX_THRESHOLD 24 |
| #define XAXIDMA_DFT_TX_WAITBOUND 254 |
| #define XAXIDMA_DFT_RX_THRESHOLD 24 |
| #define XAXIDMA_DFT_RX_WAITBOUND 254 |
| |
| #define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */ |
| #define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */ |
| #define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */ |
| #define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */ |
| #define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */ |
| #define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */ |
| #define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */ |
| #define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */ |
| #define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */ |
| |
| #define NIXGE_REG_CTRL_OFFSET 0x4000 |
| #define NIXGE_REG_INFO 0x00 |
| #define NIXGE_REG_MAC_CTL 0x04 |
| #define NIXGE_REG_PHY_CTL 0x08 |
| #define NIXGE_REG_LED_CTL 0x0c |
| #define NIXGE_REG_MDIO_DATA 0x10 |
| #define NIXGE_REG_MDIO_ADDR 0x14 |
| #define NIXGE_REG_MDIO_OP 0x18 |
| #define NIXGE_REG_MDIO_CTRL 0x1c |
| |
| #define NIXGE_ID_LED_CTL_EN BIT(0) |
| #define NIXGE_ID_LED_CTL_VAL BIT(1) |
| |
| #define NIXGE_MDIO_CLAUSE45 BIT(12) |
| #define NIXGE_MDIO_CLAUSE22 0 |
| #define NIXGE_MDIO_OP(n) (((n) & 0x3) << 10) |
| #define NIXGE_MDIO_OP_ADDRESS 0 |
| #define NIXGE_MDIO_C45_WRITE BIT(0) |
| #define NIXGE_MDIO_C45_READ (BIT(1) | BIT(0)) |
| #define NIXGE_MDIO_C22_WRITE BIT(0) |
| #define NIXGE_MDIO_C22_READ BIT(1) |
| #define NIXGE_MDIO_ADDR(n) (((n) & 0x1f) << 5) |
| #define NIXGE_MDIO_MMD(n) (((n) & 0x1f) << 0) |
| |
| #define NIXGE_REG_MAC_LSB 0x1000 |
| #define NIXGE_REG_MAC_MSB 0x1004 |
| |
| /* Packet size info */ |
| #define NIXGE_HDR_SIZE 14 /* Size of Ethernet header */ |
| #define NIXGE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ |
| #define NIXGE_MTU 1500 /* Max MTU of an Ethernet frame */ |
| #define NIXGE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ |
| |
| #define NIXGE_MAX_FRAME_SIZE (NIXGE_MTU + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE) |
| #define NIXGE_MAX_JUMBO_FRAME_SIZE \ |
| (NIXGE_JUMBO_MTU + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE) |
| |
| enum nixge_version { |
| NIXGE_V2, |
| NIXGE_V3, |
| NIXGE_VERSION_COUNT |
| }; |
| |
| struct nixge_hw_dma_bd { |
| u32 next_lo; |
| u32 next_hi; |
| u32 phys_lo; |
| u32 phys_hi; |
| u32 reserved3; |
| u32 reserved4; |
| u32 cntrl; |
| u32 status; |
| u32 app0; |
| u32 app1; |
| u32 app2; |
| u32 app3; |
| u32 app4; |
| u32 sw_id_offset_lo; |
| u32 sw_id_offset_hi; |
| u32 reserved6; |
| }; |
| |
| #ifdef CONFIG_PHYS_ADDR_T_64BIT |
| #define nixge_hw_dma_bd_set_addr(bd, field, addr) \ |
| do { \ |
| (bd)->field##_lo = lower_32_bits((addr)); \ |
| (bd)->field##_hi = upper_32_bits((addr)); \ |
| } while (0) |
| #else |
| #define nixge_hw_dma_bd_set_addr(bd, field, addr) \ |
| ((bd)->field##_lo = lower_32_bits((addr))) |
| #endif |
| |
| #define nixge_hw_dma_bd_set_phys(bd, addr) \ |
| nixge_hw_dma_bd_set_addr((bd), phys, (addr)) |
| |
| #define nixge_hw_dma_bd_set_next(bd, addr) \ |
| nixge_hw_dma_bd_set_addr((bd), next, (addr)) |
| |
| #define nixge_hw_dma_bd_set_offset(bd, addr) \ |
| nixge_hw_dma_bd_set_addr((bd), sw_id_offset, (addr)) |
| |
| #ifdef CONFIG_PHYS_ADDR_T_64BIT |
| #define nixge_hw_dma_bd_get_addr(bd, field) \ |
| (dma_addr_t)((((u64)(bd)->field##_hi) << 32) | ((bd)->field##_lo)) |
| #else |
| #define nixge_hw_dma_bd_get_addr(bd, field) \ |
| (dma_addr_t)((bd)->field##_lo) |
| #endif |
| |
| struct nixge_tx_skb { |
| struct sk_buff *skb; |
| dma_addr_t mapping; |
| size_t size; |
| bool mapped_as_page; |
| }; |
| |
| struct nixge_priv { |
| struct net_device *ndev; |
| struct napi_struct napi; |
| struct device *dev; |
| |
| /* Connection to PHY device */ |
| struct device_node *phy_node; |
| phy_interface_t phy_mode; |
| |
| int link; |
| unsigned int speed; |
| unsigned int duplex; |
| |
| /* MDIO bus data */ |
| struct mii_bus *mii_bus; /* MII bus reference */ |
| |
| /* IO registers, dma functions and IRQs */ |
| void __iomem *ctrl_regs; |
| void __iomem *dma_regs; |
| |
| struct tasklet_struct dma_err_tasklet; |
| |
| int tx_irq; |
| int rx_irq; |
| |
| /* Buffer descriptors */ |
| struct nixge_hw_dma_bd *tx_bd_v; |
| struct nixge_tx_skb *tx_skb; |
| dma_addr_t tx_bd_p; |
| |
| struct nixge_hw_dma_bd *rx_bd_v; |
| dma_addr_t rx_bd_p; |
| u32 tx_bd_ci; |
| u32 tx_bd_tail; |
| u32 rx_bd_ci; |
| |
| u32 coalesce_count_rx; |
| u32 coalesce_count_tx; |
| }; |
| |
| static void nixge_dma_write_reg(struct nixge_priv *priv, off_t offset, u32 val) |
| { |
| writel(val, priv->dma_regs + offset); |
| } |
| |
| static void nixge_dma_write_desc_reg(struct nixge_priv *priv, off_t offset, |
| dma_addr_t addr) |
| { |
| writel(lower_32_bits(addr), priv->dma_regs + offset); |
| #ifdef CONFIG_PHYS_ADDR_T_64BIT |
| writel(upper_32_bits(addr), priv->dma_regs + offset + 4); |
| #endif |
| } |
| |
| static u32 nixge_dma_read_reg(const struct nixge_priv *priv, off_t offset) |
| { |
| return readl(priv->dma_regs + offset); |
| } |
| |
| static void nixge_ctrl_write_reg(struct nixge_priv *priv, off_t offset, u32 val) |
| { |
| writel(val, priv->ctrl_regs + offset); |
| } |
| |
| static u32 nixge_ctrl_read_reg(struct nixge_priv *priv, off_t offset) |
| { |
| return readl(priv->ctrl_regs + offset); |
| } |
| |
| #define nixge_ctrl_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \ |
| readl_poll_timeout((priv)->ctrl_regs + (addr), (val), (cond), \ |
| (sleep_us), (timeout_us)) |
| |
| #define nixge_dma_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \ |
| readl_poll_timeout((priv)->dma_regs + (addr), (val), (cond), \ |
| (sleep_us), (timeout_us)) |
| |
| static void nixge_hw_dma_bd_release(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| dma_addr_t phys_addr; |
| struct sk_buff *skb; |
| int i; |
| |
| for (i = 0; i < RX_BD_NUM; i++) { |
| phys_addr = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i], |
| phys); |
| |
| dma_unmap_single(ndev->dev.parent, phys_addr, |
| NIXGE_MAX_JUMBO_FRAME_SIZE, |
| DMA_FROM_DEVICE); |
| |
| skb = (struct sk_buff *)(uintptr_t) |
| nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i], |
| sw_id_offset); |
| dev_kfree_skb(skb); |
| } |
| |
| if (priv->rx_bd_v) |
| dma_free_coherent(ndev->dev.parent, |
| sizeof(*priv->rx_bd_v) * RX_BD_NUM, |
| priv->rx_bd_v, |
| priv->rx_bd_p); |
| |
| if (priv->tx_skb) |
| devm_kfree(ndev->dev.parent, priv->tx_skb); |
| |
| if (priv->tx_bd_v) |
| dma_free_coherent(ndev->dev.parent, |
| sizeof(*priv->tx_bd_v) * TX_BD_NUM, |
| priv->tx_bd_v, |
| priv->tx_bd_p); |
| } |
| |
| static int nixge_hw_dma_bd_init(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| struct sk_buff *skb; |
| dma_addr_t phys; |
| u32 cr; |
| int i; |
| |
| /* Reset the indexes which are used for accessing the BDs */ |
| priv->tx_bd_ci = 0; |
| priv->tx_bd_tail = 0; |
| priv->rx_bd_ci = 0; |
| |
| /* Allocate the Tx and Rx buffer descriptors. */ |
| priv->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, |
| sizeof(*priv->tx_bd_v) * TX_BD_NUM, |
| &priv->tx_bd_p, GFP_KERNEL); |
| if (!priv->tx_bd_v) |
| goto out; |
| |
| priv->tx_skb = devm_kcalloc(ndev->dev.parent, |
| TX_BD_NUM, sizeof(*priv->tx_skb), |
| GFP_KERNEL); |
| if (!priv->tx_skb) |
| goto out; |
| |
| priv->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, |
| sizeof(*priv->rx_bd_v) * RX_BD_NUM, |
| &priv->rx_bd_p, GFP_KERNEL); |
| if (!priv->rx_bd_v) |
| goto out; |
| |
| for (i = 0; i < TX_BD_NUM; i++) { |
| nixge_hw_dma_bd_set_next(&priv->tx_bd_v[i], |
| priv->tx_bd_p + |
| sizeof(*priv->tx_bd_v) * |
| ((i + 1) % TX_BD_NUM)); |
| } |
| |
| for (i = 0; i < RX_BD_NUM; i++) { |
| nixge_hw_dma_bd_set_next(&priv->rx_bd_v[i], |
| priv->rx_bd_p |
| + sizeof(*priv->rx_bd_v) * |
| ((i + 1) % RX_BD_NUM)); |
| |
| skb = __netdev_alloc_skb_ip_align(ndev, |
| NIXGE_MAX_JUMBO_FRAME_SIZE, |
| GFP_KERNEL); |
| if (!skb) |
| goto out; |
| |
| nixge_hw_dma_bd_set_offset(&priv->rx_bd_v[i], (uintptr_t)skb); |
| phys = dma_map_single(ndev->dev.parent, skb->data, |
| NIXGE_MAX_JUMBO_FRAME_SIZE, |
| DMA_FROM_DEVICE); |
| |
| nixge_hw_dma_bd_set_phys(&priv->rx_bd_v[i], phys); |
| |
| priv->rx_bd_v[i].cntrl = NIXGE_MAX_JUMBO_FRAME_SIZE; |
| } |
| |
| /* Start updating the Rx channel control register */ |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| /* Update the interrupt coalesce count */ |
| cr = ((cr & ~XAXIDMA_COALESCE_MASK) | |
| ((priv->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT)); |
| /* Update the delay timer count */ |
| cr = ((cr & ~XAXIDMA_DELAY_MASK) | |
| (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); |
| /* Enable coalesce, delay timer and error interrupts */ |
| cr |= XAXIDMA_IRQ_ALL_MASK; |
| /* Write to the Rx channel control register */ |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr); |
| |
| /* Start updating the Tx channel control register */ |
| cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET); |
| /* Update the interrupt coalesce count */ |
| cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | |
| ((priv->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT)); |
| /* Update the delay timer count */ |
| cr = (((cr & ~XAXIDMA_DELAY_MASK)) | |
| (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); |
| /* Enable coalesce, delay timer and error interrupts */ |
| cr |= XAXIDMA_IRQ_ALL_MASK; |
| /* Write to the Tx channel control register */ |
| nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, cr); |
| |
| /* Populate the tail pointer and bring the Rx Axi DMA engine out of |
| * halted state. This will make the Rx side ready for reception. |
| */ |
| nixge_dma_write_desc_reg(priv, XAXIDMA_RX_CDESC_OFFSET, priv->rx_bd_p); |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, |
| cr | XAXIDMA_CR_RUNSTOP_MASK); |
| nixge_dma_write_desc_reg(priv, XAXIDMA_RX_TDESC_OFFSET, priv->rx_bd_p + |
| (sizeof(*priv->rx_bd_v) * (RX_BD_NUM - 1))); |
| |
| /* Write to the RS (Run-stop) bit in the Tx channel control register. |
| * Tx channel is now ready to run. But only after we write to the |
| * tail pointer register that the Tx channel will start transmitting. |
| */ |
| nixge_dma_write_desc_reg(priv, XAXIDMA_TX_CDESC_OFFSET, priv->tx_bd_p); |
| cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET); |
| nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, |
| cr | XAXIDMA_CR_RUNSTOP_MASK); |
| |
| return 0; |
| out: |
| nixge_hw_dma_bd_release(ndev); |
| return -ENOMEM; |
| } |
| |
| static void __nixge_device_reset(struct nixge_priv *priv, off_t offset) |
| { |
| u32 status; |
| int err; |
| |
| /* Reset Axi DMA. This would reset NIXGE Ethernet core as well. |
| * The reset process of Axi DMA takes a while to complete as all |
| * pending commands/transfers will be flushed or completed during |
| * this reset process. |
| */ |
| nixge_dma_write_reg(priv, offset, XAXIDMA_CR_RESET_MASK); |
| err = nixge_dma_poll_timeout(priv, offset, status, |
| !(status & XAXIDMA_CR_RESET_MASK), 10, |
| 1000); |
| if (err) |
| netdev_err(priv->ndev, "%s: DMA reset timeout!\n", __func__); |
| } |
| |
| static void nixge_device_reset(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| |
| __nixge_device_reset(priv, XAXIDMA_TX_CR_OFFSET); |
| __nixge_device_reset(priv, XAXIDMA_RX_CR_OFFSET); |
| |
| if (nixge_hw_dma_bd_init(ndev)) |
| netdev_err(ndev, "%s: descriptor allocation failed\n", |
| __func__); |
| |
| netif_trans_update(ndev); |
| } |
| |
| static void nixge_handle_link_change(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| struct phy_device *phydev = ndev->phydev; |
| |
| if (phydev->link != priv->link || phydev->speed != priv->speed || |
| phydev->duplex != priv->duplex) { |
| priv->link = phydev->link; |
| priv->speed = phydev->speed; |
| priv->duplex = phydev->duplex; |
| phy_print_status(phydev); |
| } |
| } |
| |
| static void nixge_tx_skb_unmap(struct nixge_priv *priv, |
| struct nixge_tx_skb *tx_skb) |
| { |
| if (tx_skb->mapping) { |
| if (tx_skb->mapped_as_page) |
| dma_unmap_page(priv->ndev->dev.parent, tx_skb->mapping, |
| tx_skb->size, DMA_TO_DEVICE); |
| else |
| dma_unmap_single(priv->ndev->dev.parent, |
| tx_skb->mapping, |
| tx_skb->size, DMA_TO_DEVICE); |
| tx_skb->mapping = 0; |
| } |
| |
| if (tx_skb->skb) { |
| dev_kfree_skb_any(tx_skb->skb); |
| tx_skb->skb = NULL; |
| } |
| } |
| |
| static void nixge_start_xmit_done(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| struct nixge_hw_dma_bd *cur_p; |
| struct nixge_tx_skb *tx_skb; |
| unsigned int status = 0; |
| u32 packets = 0; |
| u32 size = 0; |
| |
| cur_p = &priv->tx_bd_v[priv->tx_bd_ci]; |
| tx_skb = &priv->tx_skb[priv->tx_bd_ci]; |
| |
| status = cur_p->status; |
| |
| while (status & XAXIDMA_BD_STS_COMPLETE_MASK) { |
| nixge_tx_skb_unmap(priv, tx_skb); |
| cur_p->status = 0; |
| |
| size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; |
| packets++; |
| |
| ++priv->tx_bd_ci; |
| priv->tx_bd_ci %= TX_BD_NUM; |
| cur_p = &priv->tx_bd_v[priv->tx_bd_ci]; |
| tx_skb = &priv->tx_skb[priv->tx_bd_ci]; |
| status = cur_p->status; |
| } |
| |
| ndev->stats.tx_packets += packets; |
| ndev->stats.tx_bytes += size; |
| |
| if (packets) |
| netif_wake_queue(ndev); |
| } |
| |
| static int nixge_check_tx_bd_space(struct nixge_priv *priv, |
| int num_frag) |
| { |
| struct nixge_hw_dma_bd *cur_p; |
| |
| cur_p = &priv->tx_bd_v[(priv->tx_bd_tail + num_frag) % TX_BD_NUM]; |
| if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK) |
| return NETDEV_TX_BUSY; |
| return 0; |
| } |
| |
| static netdev_tx_t nixge_start_xmit(struct sk_buff *skb, |
| struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| struct nixge_hw_dma_bd *cur_p; |
| struct nixge_tx_skb *tx_skb; |
| dma_addr_t tail_p, cur_phys; |
| skb_frag_t *frag; |
| u32 num_frag; |
| u32 ii; |
| |
| num_frag = skb_shinfo(skb)->nr_frags; |
| cur_p = &priv->tx_bd_v[priv->tx_bd_tail]; |
| tx_skb = &priv->tx_skb[priv->tx_bd_tail]; |
| |
| if (nixge_check_tx_bd_space(priv, num_frag)) { |
| if (!netif_queue_stopped(ndev)) |
| netif_stop_queue(ndev); |
| return NETDEV_TX_OK; |
| } |
| |
| cur_phys = dma_map_single(ndev->dev.parent, skb->data, |
| skb_headlen(skb), DMA_TO_DEVICE); |
| if (dma_mapping_error(ndev->dev.parent, cur_phys)) |
| goto drop; |
| nixge_hw_dma_bd_set_phys(cur_p, cur_phys); |
| |
| cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK; |
| |
| tx_skb->skb = NULL; |
| tx_skb->mapping = cur_phys; |
| tx_skb->size = skb_headlen(skb); |
| tx_skb->mapped_as_page = false; |
| |
| for (ii = 0; ii < num_frag; ii++) { |
| ++priv->tx_bd_tail; |
| priv->tx_bd_tail %= TX_BD_NUM; |
| cur_p = &priv->tx_bd_v[priv->tx_bd_tail]; |
| tx_skb = &priv->tx_skb[priv->tx_bd_tail]; |
| frag = &skb_shinfo(skb)->frags[ii]; |
| |
| cur_phys = skb_frag_dma_map(ndev->dev.parent, frag, 0, |
| skb_frag_size(frag), |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(ndev->dev.parent, cur_phys)) |
| goto frag_err; |
| nixge_hw_dma_bd_set_phys(cur_p, cur_phys); |
| |
| cur_p->cntrl = skb_frag_size(frag); |
| |
| tx_skb->skb = NULL; |
| tx_skb->mapping = cur_phys; |
| tx_skb->size = skb_frag_size(frag); |
| tx_skb->mapped_as_page = true; |
| } |
| |
| /* last buffer of the frame */ |
| tx_skb->skb = skb; |
| |
| cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK; |
| |
| tail_p = priv->tx_bd_p + sizeof(*priv->tx_bd_v) * priv->tx_bd_tail; |
| /* Start the transfer */ |
| nixge_dma_write_desc_reg(priv, XAXIDMA_TX_TDESC_OFFSET, tail_p); |
| ++priv->tx_bd_tail; |
| priv->tx_bd_tail %= TX_BD_NUM; |
| |
| return NETDEV_TX_OK; |
| frag_err: |
| for (; ii > 0; ii--) { |
| if (priv->tx_bd_tail) |
| priv->tx_bd_tail--; |
| else |
| priv->tx_bd_tail = TX_BD_NUM - 1; |
| |
| tx_skb = &priv->tx_skb[priv->tx_bd_tail]; |
| nixge_tx_skb_unmap(priv, tx_skb); |
| |
| cur_p = &priv->tx_bd_v[priv->tx_bd_tail]; |
| cur_p->status = 0; |
| } |
| dma_unmap_single(priv->ndev->dev.parent, |
| tx_skb->mapping, |
| tx_skb->size, DMA_TO_DEVICE); |
| drop: |
| ndev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| static int nixge_recv(struct net_device *ndev, int budget) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| struct sk_buff *skb, *new_skb; |
| struct nixge_hw_dma_bd *cur_p; |
| dma_addr_t tail_p = 0, cur_phys = 0; |
| u32 packets = 0; |
| u32 length = 0; |
| u32 size = 0; |
| |
| cur_p = &priv->rx_bd_v[priv->rx_bd_ci]; |
| |
| while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK && |
| budget > packets)) { |
| tail_p = priv->rx_bd_p + sizeof(*priv->rx_bd_v) * |
| priv->rx_bd_ci; |
| |
| skb = (struct sk_buff *)(uintptr_t) |
| nixge_hw_dma_bd_get_addr(cur_p, sw_id_offset); |
| |
| length = cur_p->status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; |
| if (length > NIXGE_MAX_JUMBO_FRAME_SIZE) |
| length = NIXGE_MAX_JUMBO_FRAME_SIZE; |
| |
| dma_unmap_single(ndev->dev.parent, |
| nixge_hw_dma_bd_get_addr(cur_p, phys), |
| NIXGE_MAX_JUMBO_FRAME_SIZE, |
| DMA_FROM_DEVICE); |
| |
| skb_put(skb, length); |
| |
| skb->protocol = eth_type_trans(skb, ndev); |
| skb_checksum_none_assert(skb); |
| |
| /* For now mark them as CHECKSUM_NONE since |
| * we don't have offload capabilities |
| */ |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| napi_gro_receive(&priv->napi, skb); |
| |
| size += length; |
| packets++; |
| |
| new_skb = netdev_alloc_skb_ip_align(ndev, |
| NIXGE_MAX_JUMBO_FRAME_SIZE); |
| if (!new_skb) |
| return packets; |
| |
| cur_phys = dma_map_single(ndev->dev.parent, new_skb->data, |
| NIXGE_MAX_JUMBO_FRAME_SIZE, |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(ndev->dev.parent, cur_phys)) { |
| /* FIXME: bail out and clean up */ |
| netdev_err(ndev, "Failed to map ...\n"); |
| } |
| nixge_hw_dma_bd_set_phys(cur_p, cur_phys); |
| cur_p->cntrl = NIXGE_MAX_JUMBO_FRAME_SIZE; |
| cur_p->status = 0; |
| nixge_hw_dma_bd_set_offset(cur_p, (uintptr_t)new_skb); |
| |
| ++priv->rx_bd_ci; |
| priv->rx_bd_ci %= RX_BD_NUM; |
| cur_p = &priv->rx_bd_v[priv->rx_bd_ci]; |
| } |
| |
| ndev->stats.rx_packets += packets; |
| ndev->stats.rx_bytes += size; |
| |
| if (tail_p) |
| nixge_dma_write_desc_reg(priv, XAXIDMA_RX_TDESC_OFFSET, tail_p); |
| |
| return packets; |
| } |
| |
| static int nixge_poll(struct napi_struct *napi, int budget) |
| { |
| struct nixge_priv *priv = container_of(napi, struct nixge_priv, napi); |
| int work_done; |
| u32 status, cr; |
| |
| work_done = 0; |
| |
| work_done = nixge_recv(priv->ndev, budget); |
| if (work_done < budget) { |
| napi_complete_done(napi, work_done); |
| status = nixge_dma_read_reg(priv, XAXIDMA_RX_SR_OFFSET); |
| |
| if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { |
| /* If there's more, reschedule, but clear */ |
| nixge_dma_write_reg(priv, XAXIDMA_RX_SR_OFFSET, status); |
| napi_reschedule(napi); |
| } else { |
| /* if not, turn on RX IRQs again ... */ |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| cr |= (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK); |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr); |
| } |
| } |
| |
| return work_done; |
| } |
| |
| static irqreturn_t nixge_tx_irq(int irq, void *_ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(_ndev); |
| struct net_device *ndev = _ndev; |
| unsigned int status; |
| dma_addr_t phys; |
| u32 cr; |
| |
| status = nixge_dma_read_reg(priv, XAXIDMA_TX_SR_OFFSET); |
| if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { |
| nixge_dma_write_reg(priv, XAXIDMA_TX_SR_OFFSET, status); |
| nixge_start_xmit_done(priv->ndev); |
| goto out; |
| } |
| if (!(status & XAXIDMA_IRQ_ALL_MASK)) { |
| netdev_err(ndev, "No interrupts asserted in Tx path\n"); |
| return IRQ_NONE; |
| } |
| if (status & XAXIDMA_IRQ_ERROR_MASK) { |
| phys = nixge_hw_dma_bd_get_addr(&priv->tx_bd_v[priv->tx_bd_ci], |
| phys); |
| |
| netdev_err(ndev, "DMA Tx error 0x%x\n", status); |
| netdev_err(ndev, "Current BD is at: 0x%llx\n", (u64)phys); |
| |
| cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET); |
| /* Disable coalesce, delay timer and error interrupts */ |
| cr &= (~XAXIDMA_IRQ_ALL_MASK); |
| /* Write to the Tx channel control register */ |
| nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, cr); |
| |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| /* Disable coalesce, delay timer and error interrupts */ |
| cr &= (~XAXIDMA_IRQ_ALL_MASK); |
| /* Write to the Rx channel control register */ |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr); |
| |
| tasklet_schedule(&priv->dma_err_tasklet); |
| nixge_dma_write_reg(priv, XAXIDMA_TX_SR_OFFSET, status); |
| } |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t nixge_rx_irq(int irq, void *_ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(_ndev); |
| struct net_device *ndev = _ndev; |
| unsigned int status; |
| dma_addr_t phys; |
| u32 cr; |
| |
| status = nixge_dma_read_reg(priv, XAXIDMA_RX_SR_OFFSET); |
| if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { |
| /* Turn of IRQs because NAPI */ |
| nixge_dma_write_reg(priv, XAXIDMA_RX_SR_OFFSET, status); |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| cr &= ~(XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK); |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr); |
| |
| if (napi_schedule_prep(&priv->napi)) |
| __napi_schedule(&priv->napi); |
| goto out; |
| } |
| if (!(status & XAXIDMA_IRQ_ALL_MASK)) { |
| netdev_err(ndev, "No interrupts asserted in Rx path\n"); |
| return IRQ_NONE; |
| } |
| if (status & XAXIDMA_IRQ_ERROR_MASK) { |
| phys = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[priv->rx_bd_ci], |
| phys); |
| netdev_err(ndev, "DMA Rx error 0x%x\n", status); |
| netdev_err(ndev, "Current BD is at: 0x%llx\n", (u64)phys); |
| |
| cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET); |
| /* Disable coalesce, delay timer and error interrupts */ |
| cr &= (~XAXIDMA_IRQ_ALL_MASK); |
| /* Finally write to the Tx channel control register */ |
| nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, cr); |
| |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| /* Disable coalesce, delay timer and error interrupts */ |
| cr &= (~XAXIDMA_IRQ_ALL_MASK); |
| /* write to the Rx channel control register */ |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr); |
| |
| tasklet_schedule(&priv->dma_err_tasklet); |
| nixge_dma_write_reg(priv, XAXIDMA_RX_SR_OFFSET, status); |
| } |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static void nixge_dma_err_handler(struct tasklet_struct *t) |
| { |
| struct nixge_priv *lp = from_tasklet(lp, t, dma_err_tasklet); |
| struct nixge_hw_dma_bd *cur_p; |
| struct nixge_tx_skb *tx_skb; |
| u32 cr, i; |
| |
| __nixge_device_reset(lp, XAXIDMA_TX_CR_OFFSET); |
| __nixge_device_reset(lp, XAXIDMA_RX_CR_OFFSET); |
| |
| for (i = 0; i < TX_BD_NUM; i++) { |
| cur_p = &lp->tx_bd_v[i]; |
| tx_skb = &lp->tx_skb[i]; |
| nixge_tx_skb_unmap(lp, tx_skb); |
| |
| nixge_hw_dma_bd_set_phys(cur_p, 0); |
| cur_p->cntrl = 0; |
| cur_p->status = 0; |
| nixge_hw_dma_bd_set_offset(cur_p, 0); |
| } |
| |
| for (i = 0; i < RX_BD_NUM; i++) { |
| cur_p = &lp->rx_bd_v[i]; |
| cur_p->status = 0; |
| } |
| |
| lp->tx_bd_ci = 0; |
| lp->tx_bd_tail = 0; |
| lp->rx_bd_ci = 0; |
| |
| /* Start updating the Rx channel control register */ |
| cr = nixge_dma_read_reg(lp, XAXIDMA_RX_CR_OFFSET); |
| /* Update the interrupt coalesce count */ |
| cr = ((cr & ~XAXIDMA_COALESCE_MASK) | |
| (XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); |
| /* Update the delay timer count */ |
| cr = ((cr & ~XAXIDMA_DELAY_MASK) | |
| (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); |
| /* Enable coalesce, delay timer and error interrupts */ |
| cr |= XAXIDMA_IRQ_ALL_MASK; |
| /* Finally write to the Rx channel control register */ |
| nixge_dma_write_reg(lp, XAXIDMA_RX_CR_OFFSET, cr); |
| |
| /* Start updating the Tx channel control register */ |
| cr = nixge_dma_read_reg(lp, XAXIDMA_TX_CR_OFFSET); |
| /* Update the interrupt coalesce count */ |
| cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | |
| (XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); |
| /* Update the delay timer count */ |
| cr = (((cr & ~XAXIDMA_DELAY_MASK)) | |
| (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); |
| /* Enable coalesce, delay timer and error interrupts */ |
| cr |= XAXIDMA_IRQ_ALL_MASK; |
| /* Finally write to the Tx channel control register */ |
| nixge_dma_write_reg(lp, XAXIDMA_TX_CR_OFFSET, cr); |
| |
| /* Populate the tail pointer and bring the Rx Axi DMA engine out of |
| * halted state. This will make the Rx side ready for reception. |
| */ |
| nixge_dma_write_desc_reg(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); |
| cr = nixge_dma_read_reg(lp, XAXIDMA_RX_CR_OFFSET); |
| nixge_dma_write_reg(lp, XAXIDMA_RX_CR_OFFSET, |
| cr | XAXIDMA_CR_RUNSTOP_MASK); |
| nixge_dma_write_desc_reg(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + |
| (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); |
| |
| /* Write to the RS (Run-stop) bit in the Tx channel control register. |
| * Tx channel is now ready to run. But only after we write to the |
| * tail pointer register that the Tx channel will start transmitting |
| */ |
| nixge_dma_write_desc_reg(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); |
| cr = nixge_dma_read_reg(lp, XAXIDMA_TX_CR_OFFSET); |
| nixge_dma_write_reg(lp, XAXIDMA_TX_CR_OFFSET, |
| cr | XAXIDMA_CR_RUNSTOP_MASK); |
| } |
| |
| static int nixge_open(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| struct phy_device *phy; |
| int ret; |
| |
| nixge_device_reset(ndev); |
| |
| phy = of_phy_connect(ndev, priv->phy_node, |
| &nixge_handle_link_change, 0, priv->phy_mode); |
| if (!phy) |
| return -ENODEV; |
| |
| phy_start(phy); |
| |
| /* Enable tasklets for Axi DMA error handling */ |
| tasklet_setup(&priv->dma_err_tasklet, nixge_dma_err_handler); |
| |
| napi_enable(&priv->napi); |
| |
| /* Enable interrupts for Axi DMA Tx */ |
| ret = request_irq(priv->tx_irq, nixge_tx_irq, 0, ndev->name, ndev); |
| if (ret) |
| goto err_tx_irq; |
| /* Enable interrupts for Axi DMA Rx */ |
| ret = request_irq(priv->rx_irq, nixge_rx_irq, 0, ndev->name, ndev); |
| if (ret) |
| goto err_rx_irq; |
| |
| netif_start_queue(ndev); |
| |
| return 0; |
| |
| err_rx_irq: |
| free_irq(priv->tx_irq, ndev); |
| err_tx_irq: |
| napi_disable(&priv->napi); |
| phy_stop(phy); |
| phy_disconnect(phy); |
| tasklet_kill(&priv->dma_err_tasklet); |
| netdev_err(ndev, "request_irq() failed\n"); |
| return ret; |
| } |
| |
| static int nixge_stop(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| u32 cr; |
| |
| netif_stop_queue(ndev); |
| napi_disable(&priv->napi); |
| |
| if (ndev->phydev) { |
| phy_stop(ndev->phydev); |
| phy_disconnect(ndev->phydev); |
| } |
| |
| cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, |
| cr & (~XAXIDMA_CR_RUNSTOP_MASK)); |
| cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET); |
| nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, |
| cr & (~XAXIDMA_CR_RUNSTOP_MASK)); |
| |
| tasklet_kill(&priv->dma_err_tasklet); |
| |
| free_irq(priv->tx_irq, ndev); |
| free_irq(priv->rx_irq, ndev); |
| |
| nixge_hw_dma_bd_release(ndev); |
| |
| return 0; |
| } |
| |
| static int nixge_change_mtu(struct net_device *ndev, int new_mtu) |
| { |
| if (netif_running(ndev)) |
| return -EBUSY; |
| |
| if ((new_mtu + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE) > |
| NIXGE_MAX_JUMBO_FRAME_SIZE) |
| return -EINVAL; |
| |
| ndev->mtu = new_mtu; |
| |
| return 0; |
| } |
| |
| static s32 __nixge_hw_set_mac_address(struct net_device *ndev) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MAC_LSB, |
| (ndev->dev_addr[2]) << 24 | |
| (ndev->dev_addr[3] << 16) | |
| (ndev->dev_addr[4] << 8) | |
| (ndev->dev_addr[5] << 0)); |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MAC_MSB, |
| (ndev->dev_addr[1] | (ndev->dev_addr[0] << 8))); |
| |
| return 0; |
| } |
| |
| static int nixge_net_set_mac_address(struct net_device *ndev, void *p) |
| { |
| int err; |
| |
| err = eth_mac_addr(ndev, p); |
| if (!err) |
| __nixge_hw_set_mac_address(ndev); |
| |
| return err; |
| } |
| |
| static const struct net_device_ops nixge_netdev_ops = { |
| .ndo_open = nixge_open, |
| .ndo_stop = nixge_stop, |
| .ndo_start_xmit = nixge_start_xmit, |
| .ndo_change_mtu = nixge_change_mtu, |
| .ndo_set_mac_address = nixge_net_set_mac_address, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static void nixge_ethtools_get_drvinfo(struct net_device *ndev, |
| struct ethtool_drvinfo *ed) |
| { |
| strlcpy(ed->driver, "nixge", sizeof(ed->driver)); |
| strlcpy(ed->bus_info, "platform", sizeof(ed->bus_info)); |
| } |
| |
| static int |
| nixge_ethtools_get_coalesce(struct net_device *ndev, |
| struct ethtool_coalesce *ecoalesce, |
| struct kernel_ethtool_coalesce *kernel_coal, |
| struct netlink_ext_ack *extack) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| u32 regval = 0; |
| |
| regval = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET); |
| ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) |
| >> XAXIDMA_COALESCE_SHIFT; |
| regval = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET); |
| ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) |
| >> XAXIDMA_COALESCE_SHIFT; |
| return 0; |
| } |
| |
| static int |
| nixge_ethtools_set_coalesce(struct net_device *ndev, |
| struct ethtool_coalesce *ecoalesce, |
| struct kernel_ethtool_coalesce *kernel_coal, |
| struct netlink_ext_ack *extack) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| |
| if (netif_running(ndev)) { |
| netdev_err(ndev, |
| "Please stop netif before applying configuration\n"); |
| return -EBUSY; |
| } |
| |
| if (ecoalesce->rx_max_coalesced_frames) |
| priv->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames; |
| if (ecoalesce->tx_max_coalesced_frames) |
| priv->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames; |
| |
| return 0; |
| } |
| |
| static int nixge_ethtools_set_phys_id(struct net_device *ndev, |
| enum ethtool_phys_id_state state) |
| { |
| struct nixge_priv *priv = netdev_priv(ndev); |
| u32 ctrl; |
| |
| ctrl = nixge_ctrl_read_reg(priv, NIXGE_REG_LED_CTL); |
| switch (state) { |
| case ETHTOOL_ID_ACTIVE: |
| ctrl |= NIXGE_ID_LED_CTL_EN; |
| /* Enable identification LED override*/ |
| nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl); |
| return 2; |
| |
| case ETHTOOL_ID_ON: |
| ctrl |= NIXGE_ID_LED_CTL_VAL; |
| nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl); |
| break; |
| |
| case ETHTOOL_ID_OFF: |
| ctrl &= ~NIXGE_ID_LED_CTL_VAL; |
| nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl); |
| break; |
| |
| case ETHTOOL_ID_INACTIVE: |
| /* Restore LED settings */ |
| ctrl &= ~NIXGE_ID_LED_CTL_EN; |
| nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct ethtool_ops nixge_ethtool_ops = { |
| .supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES, |
| .get_drvinfo = nixge_ethtools_get_drvinfo, |
| .get_coalesce = nixge_ethtools_get_coalesce, |
| .set_coalesce = nixge_ethtools_set_coalesce, |
| .set_phys_id = nixge_ethtools_set_phys_id, |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| .get_link = ethtool_op_get_link, |
| }; |
| |
| static int nixge_mdio_read(struct mii_bus *bus, int phy_id, int reg) |
| { |
| struct nixge_priv *priv = bus->priv; |
| u32 status, tmp; |
| int err; |
| u16 device; |
| |
| if (reg & MII_ADDR_C45) { |
| device = (reg >> 16) & 0x1f; |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff); |
| |
| tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS) |
| | NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device); |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp); |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1); |
| |
| err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status, |
| !status, 10, 1000); |
| if (err) { |
| dev_err(priv->dev, "timeout setting address"); |
| return err; |
| } |
| |
| tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_READ) | |
| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device); |
| } else { |
| device = reg & 0x1f; |
| |
| tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_READ) | |
| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device); |
| } |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp); |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1); |
| |
| err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status, |
| !status, 10, 1000); |
| if (err) { |
| dev_err(priv->dev, "timeout setting read command"); |
| return err; |
| } |
| |
| status = nixge_ctrl_read_reg(priv, NIXGE_REG_MDIO_DATA); |
| |
| return status; |
| } |
| |
| static int nixge_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) |
| { |
| struct nixge_priv *priv = bus->priv; |
| u32 status, tmp; |
| u16 device; |
| int err; |
| |
| if (reg & MII_ADDR_C45) { |
| device = (reg >> 16) & 0x1f; |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff); |
| |
| tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS) |
| | NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device); |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp); |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1); |
| |
| err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status, |
| !status, 10, 1000); |
| if (err) { |
| dev_err(priv->dev, "timeout setting address"); |
| return err; |
| } |
| |
| tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_WRITE) |
| | NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device); |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val); |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp); |
| err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status, |
| !status, 10, 1000); |
| if (err) |
| dev_err(priv->dev, "timeout setting write command"); |
| } else { |
| device = reg & 0x1f; |
| |
| tmp = NIXGE_MDIO_CLAUSE22 | |
| NIXGE_MDIO_OP(NIXGE_MDIO_C22_WRITE) | |
| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device); |
| |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val); |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp); |
| nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1); |
| |
| err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status, |
| !status, 10, 1000); |
| if (err) |
| dev_err(priv->dev, "timeout setting write command"); |
| } |
| |
| return err; |
| } |
| |
| static int nixge_mdio_setup(struct nixge_priv *priv, struct device_node *np) |
| { |
| struct mii_bus *bus; |
| |
| bus = devm_mdiobus_alloc(priv->dev); |
| if (!bus) |
| return -ENOMEM; |
| |
| snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev)); |
| bus->priv = priv; |
| bus->name = "nixge_mii_bus"; |
| bus->read = nixge_mdio_read; |
| bus->write = nixge_mdio_write; |
| bus->parent = priv->dev; |
| |
| priv->mii_bus = bus; |
| |
| return of_mdiobus_register(bus, np); |
| } |
| |
| static void *nixge_get_nvmem_address(struct device *dev) |
| { |
| struct nvmem_cell *cell; |
| size_t cell_size; |
| char *mac; |
| |
| cell = nvmem_cell_get(dev, "address"); |
| if (IS_ERR(cell)) |
| return cell; |
| |
| mac = nvmem_cell_read(cell, &cell_size); |
| nvmem_cell_put(cell); |
| |
| return mac; |
| } |
| |
| /* Match table for of_platform binding */ |
| static const struct of_device_id nixge_dt_ids[] = { |
| { .compatible = "ni,xge-enet-2.00", .data = (void *)NIXGE_V2 }, |
| { .compatible = "ni,xge-enet-3.00", .data = (void *)NIXGE_V3 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, nixge_dt_ids); |
| |
| static int nixge_of_get_resources(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id; |
| enum nixge_version version; |
| struct net_device *ndev; |
| struct nixge_priv *priv; |
| |
| ndev = platform_get_drvdata(pdev); |
| priv = netdev_priv(ndev); |
| of_id = of_match_node(nixge_dt_ids, pdev->dev.of_node); |
| if (!of_id) |
| return -ENODEV; |
| |
| version = (enum nixge_version)of_id->data; |
| if (version <= NIXGE_V2) |
| priv->dma_regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| else |
| priv->dma_regs = devm_platform_ioremap_resource_byname(pdev, "dma"); |
| if (IS_ERR(priv->dma_regs)) { |
| netdev_err(ndev, "failed to map dma regs\n"); |
| return PTR_ERR(priv->dma_regs); |
| } |
| if (version <= NIXGE_V2) |
| priv->ctrl_regs = priv->dma_regs + NIXGE_REG_CTRL_OFFSET; |
| else |
| priv->ctrl_regs = devm_platform_ioremap_resource_byname(pdev, "ctrl"); |
| if (IS_ERR(priv->ctrl_regs)) { |
| netdev_err(ndev, "failed to map ctrl regs\n"); |
| return PTR_ERR(priv->ctrl_regs); |
| } |
| return 0; |
| } |
| |
| static int nixge_probe(struct platform_device *pdev) |
| { |
| struct device_node *mn, *phy_node; |
| struct nixge_priv *priv; |
| struct net_device *ndev; |
| const u8 *mac_addr; |
| int err; |
| |
| ndev = alloc_etherdev(sizeof(*priv)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ndev); |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| |
| ndev->features = NETIF_F_SG; |
| ndev->netdev_ops = &nixge_netdev_ops; |
| ndev->ethtool_ops = &nixge_ethtool_ops; |
| |
| /* MTU range: 64 - 9000 */ |
| ndev->min_mtu = 64; |
| ndev->max_mtu = NIXGE_JUMBO_MTU; |
| |
| mac_addr = nixge_get_nvmem_address(&pdev->dev); |
| if (!IS_ERR(mac_addr) && is_valid_ether_addr(mac_addr)) { |
| eth_hw_addr_set(ndev, mac_addr); |
| kfree(mac_addr); |
| } else { |
| eth_hw_addr_random(ndev); |
| } |
| |
| priv = netdev_priv(ndev); |
| priv->ndev = ndev; |
| priv->dev = &pdev->dev; |
| |
| netif_napi_add(ndev, &priv->napi, nixge_poll, NAPI_POLL_WEIGHT); |
| err = nixge_of_get_resources(pdev); |
| if (err) |
| goto free_netdev; |
| __nixge_hw_set_mac_address(ndev); |
| |
| priv->tx_irq = platform_get_irq_byname(pdev, "tx"); |
| if (priv->tx_irq < 0) { |
| netdev_err(ndev, "could not find 'tx' irq"); |
| err = priv->tx_irq; |
| goto free_netdev; |
| } |
| |
| priv->rx_irq = platform_get_irq_byname(pdev, "rx"); |
| if (priv->rx_irq < 0) { |
| netdev_err(ndev, "could not find 'rx' irq"); |
| err = priv->rx_irq; |
| goto free_netdev; |
| } |
| |
| priv->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; |
| priv->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; |
| |
| mn = of_get_child_by_name(pdev->dev.of_node, "mdio"); |
| if (mn) { |
| err = nixge_mdio_setup(priv, mn); |
| of_node_put(mn); |
| if (err) { |
| netdev_err(ndev, "error registering mdio bus"); |
| goto free_netdev; |
| } |
| } |
| |
| err = of_get_phy_mode(pdev->dev.of_node, &priv->phy_mode); |
| if (err) { |
| netdev_err(ndev, "not find \"phy-mode\" property\n"); |
| goto unregister_mdio; |
| } |
| |
| phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); |
| if (!phy_node && of_phy_is_fixed_link(pdev->dev.of_node)) { |
| err = of_phy_register_fixed_link(pdev->dev.of_node); |
| if (err < 0) { |
| netdev_err(ndev, "broken fixed-link specification\n"); |
| goto unregister_mdio; |
| } |
| phy_node = of_node_get(pdev->dev.of_node); |
| } |
| priv->phy_node = phy_node; |
| |
| err = register_netdev(priv->ndev); |
| if (err) { |
| netdev_err(ndev, "register_netdev() error (%i)\n", err); |
| goto free_phy; |
| } |
| |
| return 0; |
| |
| free_phy: |
| if (of_phy_is_fixed_link(pdev->dev.of_node)) |
| of_phy_deregister_fixed_link(pdev->dev.of_node); |
| of_node_put(phy_node); |
| |
| unregister_mdio: |
| if (priv->mii_bus) |
| mdiobus_unregister(priv->mii_bus); |
| |
| free_netdev: |
| free_netdev(ndev); |
| |
| return err; |
| } |
| |
| static int nixge_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct nixge_priv *priv = netdev_priv(ndev); |
| |
| unregister_netdev(ndev); |
| |
| if (of_phy_is_fixed_link(pdev->dev.of_node)) |
| of_phy_deregister_fixed_link(pdev->dev.of_node); |
| of_node_put(priv->phy_node); |
| |
| if (priv->mii_bus) |
| mdiobus_unregister(priv->mii_bus); |
| |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver nixge_driver = { |
| .probe = nixge_probe, |
| .remove = nixge_remove, |
| .driver = { |
| .name = "nixge", |
| .of_match_table = of_match_ptr(nixge_dt_ids), |
| }, |
| }; |
| module_platform_driver(nixge_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("National Instruments XGE Management MAC"); |
| MODULE_AUTHOR("Moritz Fischer <mdf@kernel.org>"); |