blob: b6733e7e65805e47fc52d345040dd190ca0ea2e7 [file] [log] [blame]
/*
* T1040RDB Device Tree Source
*
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"
/ {
model = "fsl,T1040RDB";
compatible = "fsl,T1040RDB";
aliases {
phy_sgmii_2 = &phy_sgmii_2;
};
soc@ffe000000 {
fman@400000 {
ethernet@e0000 {
fixed-link = <0 1 1000 0 0>;
phy-connection-type = "sgmii";
};
ethernet@e2000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "sgmii";
};
ethernet@e4000 {
phy-handle = <&phy_sgmii_2>;
phy-connection-type = "sgmii";
};
mdio@fc000 {
phy_sgmii_2: ethernet-phy@3 {
reg = <0x03>;
};
/* VSC8514 QSGMII PHY */
phy_qsgmii_0: ethernet-phy@4 {
reg = <0x4>;
};
phy_qsgmii_1: ethernet-phy@5 {
reg = <0x5>;
};
phy_qsgmii_2: ethernet-phy@6 {
reg = <0x6>;
};
phy_qsgmii_3: ethernet-phy@7 {
reg = <0x7>;
};
/* VSC8514 QSGMII PHY */
phy_qsgmii_4: ethernet-phy@8 {
reg = <0x8>;
};
phy_qsgmii_5: ethernet-phy@9 {
reg = <0x9>;
};
phy_qsgmii_6: ethernet-phy@a {
reg = <0xa>;
};
phy_qsgmii_7: ethernet-phy@b {
reg = <0xb>;
};
};
};
};
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1040rdb-cpld";
};
};
};
#include "t1040si-post.dtsi"
&seville_switch {
status = "okay";
};
&seville_port0 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_0>;
phy-mode = "qsgmii";
label = "ETH3";
status = "okay";
};
&seville_port1 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_1>;
phy-mode = "qsgmii";
label = "ETH4";
status = "okay";
};
&seville_port2 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_2>;
phy-mode = "qsgmii";
label = "ETH5";
status = "okay";
};
&seville_port3 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_3>;
phy-mode = "qsgmii";
label = "ETH6";
status = "okay";
};
&seville_port4 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_4>;
phy-mode = "qsgmii";
label = "ETH7";
status = "okay";
};
&seville_port5 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_5>;
phy-mode = "qsgmii";
label = "ETH8";
status = "okay";
};
&seville_port6 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_6>;
phy-mode = "qsgmii";
label = "ETH9";
status = "okay";
};
&seville_port7 {
managed = "in-band-status";
phy-handle = <&phy_qsgmii_7>;
phy-mode = "qsgmii";
label = "ETH10";
status = "okay";
};
&seville_port8 {
ethernet = <&enet0>;
status = "okay";
};