| /* |
| * OpenRISC entry.S |
| * |
| * Linux architectural port borrowing liberally from similar works of |
| * others. All original copyrights apply as per the original source |
| * declaration. |
| * |
| * Modifications for the OpenRISC architecture: |
| * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> |
| * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com> |
| * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/linkage.h> |
| |
| #include <asm/processor.h> |
| #include <asm/unistd.h> |
| #include <asm/thread_info.h> |
| #include <asm/errno.h> |
| #include <asm/spr_defs.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/pgtable.h> |
| #include <asm/asm-offsets.h> |
| |
| #define DISABLE_INTERRUPTS(t1,t2) \ |
| l.mfspr t2,r0,SPR_SR ;\ |
| l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ |
| l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ |
| l.and t2,t2,t1 ;\ |
| l.mtspr r0,t2,SPR_SR |
| |
| #define ENABLE_INTERRUPTS(t1) \ |
| l.mfspr t1,r0,SPR_SR ;\ |
| l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\ |
| l.mtspr r0,t1,SPR_SR |
| |
| /* =========================================================[ macros ]=== */ |
| |
| /* |
| * We need to disable interrupts at beginning of RESTORE_ALL |
| * since interrupt might come in after we've loaded EPC return address |
| * and overwrite EPC with address somewhere in RESTORE_ALL |
| * which is of course wrong! |
| */ |
| |
| #define RESTORE_ALL \ |
| DISABLE_INTERRUPTS(r3,r4) ;\ |
| l.lwz r3,PT_PC(r1) ;\ |
| l.mtspr r0,r3,SPR_EPCR_BASE ;\ |
| l.lwz r3,PT_SR(r1) ;\ |
| l.mtspr r0,r3,SPR_ESR_BASE ;\ |
| l.lwz r2,PT_GPR2(r1) ;\ |
| l.lwz r3,PT_GPR3(r1) ;\ |
| l.lwz r4,PT_GPR4(r1) ;\ |
| l.lwz r5,PT_GPR5(r1) ;\ |
| l.lwz r6,PT_GPR6(r1) ;\ |
| l.lwz r7,PT_GPR7(r1) ;\ |
| l.lwz r8,PT_GPR8(r1) ;\ |
| l.lwz r9,PT_GPR9(r1) ;\ |
| l.lwz r10,PT_GPR10(r1) ;\ |
| l.lwz r11,PT_GPR11(r1) ;\ |
| l.lwz r12,PT_GPR12(r1) ;\ |
| l.lwz r13,PT_GPR13(r1) ;\ |
| l.lwz r14,PT_GPR14(r1) ;\ |
| l.lwz r15,PT_GPR15(r1) ;\ |
| l.lwz r16,PT_GPR16(r1) ;\ |
| l.lwz r17,PT_GPR17(r1) ;\ |
| l.lwz r18,PT_GPR18(r1) ;\ |
| l.lwz r19,PT_GPR19(r1) ;\ |
| l.lwz r20,PT_GPR20(r1) ;\ |
| l.lwz r21,PT_GPR21(r1) ;\ |
| l.lwz r22,PT_GPR22(r1) ;\ |
| l.lwz r23,PT_GPR23(r1) ;\ |
| l.lwz r24,PT_GPR24(r1) ;\ |
| l.lwz r25,PT_GPR25(r1) ;\ |
| l.lwz r26,PT_GPR26(r1) ;\ |
| l.lwz r27,PT_GPR27(r1) ;\ |
| l.lwz r28,PT_GPR28(r1) ;\ |
| l.lwz r29,PT_GPR29(r1) ;\ |
| l.lwz r30,PT_GPR30(r1) ;\ |
| l.lwz r31,PT_GPR31(r1) ;\ |
| l.lwz r1,PT_SP(r1) ;\ |
| l.rfe |
| |
| |
| #define EXCEPTION_ENTRY(handler) \ |
| .global handler ;\ |
| handler: ;\ |
| /* r1, EPCR, ESR a already saved */ ;\ |
| l.sw PT_GPR2(r1),r2 ;\ |
| l.sw PT_GPR3(r1),r3 ;\ |
| /* r4 already save */ ;\ |
| l.sw PT_GPR5(r1),r5 ;\ |
| l.sw PT_GPR6(r1),r6 ;\ |
| l.sw PT_GPR7(r1),r7 ;\ |
| l.sw PT_GPR8(r1),r8 ;\ |
| l.sw PT_GPR9(r1),r9 ;\ |
| /* r10 already saved */ ;\ |
| l.sw PT_GPR11(r1),r11 ;\ |
| /* r12 already saved */ ;\ |
| l.sw PT_GPR13(r1),r13 ;\ |
| l.sw PT_GPR14(r1),r14 ;\ |
| l.sw PT_GPR15(r1),r15 ;\ |
| l.sw PT_GPR16(r1),r16 ;\ |
| l.sw PT_GPR17(r1),r17 ;\ |
| l.sw PT_GPR18(r1),r18 ;\ |
| l.sw PT_GPR19(r1),r19 ;\ |
| l.sw PT_GPR20(r1),r20 ;\ |
| l.sw PT_GPR21(r1),r21 ;\ |
| l.sw PT_GPR22(r1),r22 ;\ |
| l.sw PT_GPR23(r1),r23 ;\ |
| l.sw PT_GPR24(r1),r24 ;\ |
| l.sw PT_GPR25(r1),r25 ;\ |
| l.sw PT_GPR26(r1),r26 ;\ |
| l.sw PT_GPR27(r1),r27 ;\ |
| l.sw PT_GPR28(r1),r28 ;\ |
| l.sw PT_GPR29(r1),r29 ;\ |
| /* r30 already save */ ;\ |
| /* l.sw PT_GPR30(r1),r30*/ ;\ |
| l.sw PT_GPR31(r1),r31 ;\ |
| /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ |
| l.addi r30,r0,-1 ;\ |
| l.sw PT_ORIG_GPR11(r1),r30 |
| |
| #define UNHANDLED_EXCEPTION(handler,vector) \ |
| .global handler ;\ |
| handler: ;\ |
| /* r1, EPCR, ESR already saved */ ;\ |
| l.sw PT_GPR2(r1),r2 ;\ |
| l.sw PT_GPR3(r1),r3 ;\ |
| l.sw PT_GPR5(r1),r5 ;\ |
| l.sw PT_GPR6(r1),r6 ;\ |
| l.sw PT_GPR7(r1),r7 ;\ |
| l.sw PT_GPR8(r1),r8 ;\ |
| l.sw PT_GPR9(r1),r9 ;\ |
| /* r10 already saved */ ;\ |
| l.sw PT_GPR11(r1),r11 ;\ |
| /* r12 already saved */ ;\ |
| l.sw PT_GPR13(r1),r13 ;\ |
| l.sw PT_GPR14(r1),r14 ;\ |
| l.sw PT_GPR15(r1),r15 ;\ |
| l.sw PT_GPR16(r1),r16 ;\ |
| l.sw PT_GPR17(r1),r17 ;\ |
| l.sw PT_GPR18(r1),r18 ;\ |
| l.sw PT_GPR19(r1),r19 ;\ |
| l.sw PT_GPR20(r1),r20 ;\ |
| l.sw PT_GPR21(r1),r21 ;\ |
| l.sw PT_GPR22(r1),r22 ;\ |
| l.sw PT_GPR23(r1),r23 ;\ |
| l.sw PT_GPR24(r1),r24 ;\ |
| l.sw PT_GPR25(r1),r25 ;\ |
| l.sw PT_GPR26(r1),r26 ;\ |
| l.sw PT_GPR27(r1),r27 ;\ |
| l.sw PT_GPR28(r1),r28 ;\ |
| l.sw PT_GPR29(r1),r29 ;\ |
| /* r31 already saved */ ;\ |
| l.sw PT_GPR30(r1),r30 ;\ |
| /* l.sw PT_GPR31(r1),r31 */ ;\ |
| /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ |
| l.addi r30,r0,-1 ;\ |
| l.sw PT_ORIG_GPR11(r1),r30 ;\ |
| l.addi r3,r1,0 ;\ |
| /* r4 is exception EA */ ;\ |
| l.addi r5,r0,vector ;\ |
| l.jal unhandled_exception ;\ |
| l.nop ;\ |
| l.j _ret_from_exception ;\ |
| l.nop |
| |
| /* |
| * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR |
| * contain the same values as when exception we're handling |
| * occured. in fact they never do. if you need them use |
| * values saved on stack (for SPR_EPC, SPR_ESR) or content |
| * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE() |
| * in 'arch/openrisc/kernel/head.S' |
| */ |
| |
| /* =====================================================[ exceptions] === */ |
| |
| /* ---[ 0x100: RESET exception ]----------------------------------------- */ |
| |
| EXCEPTION_ENTRY(_tng_kernel_start) |
| l.jal _start |
| l.andi r0,r0,0 |
| |
| /* ---[ 0x200: BUS exception ]------------------------------------------- */ |
| |
| EXCEPTION_ENTRY(_bus_fault_handler) |
| /* r4: EA of fault (set by EXCEPTION_HANDLE) */ |
| l.jal do_bus_fault |
| l.addi r3,r1,0 /* pt_regs */ |
| |
| l.j _ret_from_exception |
| l.nop |
| |
| /* ---[ 0x300: Data Page Fault exception ]------------------------------- */ |
| EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler) |
| l.and r5,r5,r0 |
| l.j 1f |
| l.nop |
| |
| EXCEPTION_ENTRY(_data_page_fault_handler) |
| /* set up parameters for do_page_fault */ |
| l.ori r5,r0,0x300 // exception vector |
| 1: |
| l.addi r3,r1,0 // pt_regs |
| /* r4 set be EXCEPTION_HANDLE */ // effective address of fault |
| |
| /* |
| * __PHX__: TODO |
| * |
| * all this can be written much simpler. look at |
| * DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part |
| */ |
| #ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX |
| l.lwz r6,PT_PC(r3) // address of an offending insn |
| l.lwz r6,0(r6) // instruction that caused pf |
| |
| l.srli r6,r6,26 // check opcode for jump insn |
| l.sfeqi r6,0 // l.j |
| l.bf 8f |
| l.sfeqi r6,1 // l.jal |
| l.bf 8f |
| l.sfeqi r6,3 // l.bnf |
| l.bf 8f |
| l.sfeqi r6,4 // l.bf |
| l.bf 8f |
| l.sfeqi r6,0x11 // l.jr |
| l.bf 8f |
| l.sfeqi r6,0x12 // l.jalr |
| l.bf 8f |
| |
| l.nop |
| |
| l.j 9f |
| l.nop |
| 8: |
| |
| l.lwz r6,PT_PC(r3) // address of an offending insn |
| l.addi r6,r6,4 |
| l.lwz r6,0(r6) // instruction that caused pf |
| l.srli r6,r6,26 // get opcode |
| 9: |
| |
| #else |
| |
| l.mfspr r6,r0,SPR_SR // SR |
| // l.lwz r6,PT_SR(r3) // ESR |
| l.andi r6,r6,SPR_SR_DSX // check for delay slot exception |
| l.sfeqi r6,0x1 // exception happened in delay slot |
| l.bnf 7f |
| l.lwz r6,PT_PC(r3) // address of an offending insn |
| |
| l.addi r6,r6,4 // offending insn is in delay slot |
| 7: |
| l.lwz r6,0(r6) // instruction that caused pf |
| l.srli r6,r6,26 // check opcode for write access |
| #endif |
| |
| l.sfgeui r6,0x34 // check opcode for write access |
| l.bnf 1f |
| l.sfleui r6,0x37 |
| l.bnf 1f |
| l.ori r6,r0,0x1 // write access |
| l.j 2f |
| l.nop |
| 1: l.ori r6,r0,0x0 // !write access |
| 2: |
| |
| /* call fault.c handler in or32/mm/fault.c */ |
| l.jal do_page_fault |
| l.nop |
| l.j _ret_from_exception |
| l.nop |
| |
| /* ---[ 0x400: Insn Page Fault exception ]------------------------------- */ |
| EXCEPTION_ENTRY(_itlb_miss_page_fault_handler) |
| l.and r5,r5,r0 |
| l.j 1f |
| l.nop |
| |
| EXCEPTION_ENTRY(_insn_page_fault_handler) |
| /* set up parameters for do_page_fault */ |
| l.ori r5,r0,0x400 // exception vector |
| 1: |
| l.addi r3,r1,0 // pt_regs |
| /* r4 set be EXCEPTION_HANDLE */ // effective address of fault |
| l.ori r6,r0,0x0 // !write access |
| |
| /* call fault.c handler in or32/mm/fault.c */ |
| l.jal do_page_fault |
| l.nop |
| l.j _ret_from_exception |
| l.nop |
| |
| |
| /* ---[ 0x500: Timer exception ]----------------------------------------- */ |
| |
| EXCEPTION_ENTRY(_timer_handler) |
| l.jal timer_interrupt |
| l.addi r3,r1,0 /* pt_regs */ |
| |
| l.j _ret_from_intr |
| l.nop |
| |
| /* ---[ 0x600: Aligment exception ]-------------------------------------- */ |
| |
| EXCEPTION_ENTRY(_alignment_handler) |
| /* r4: EA of fault (set by EXCEPTION_HANDLE) */ |
| l.jal do_unaligned_access |
| l.addi r3,r1,0 /* pt_regs */ |
| |
| l.j _ret_from_exception |
| l.nop |
| |
| #if 0 |
| EXCEPTION_ENTRY(_aligment_handler) |
| // l.mfspr r2,r0,SPR_EEAR_BASE /* Load the efective addres */ |
| l.addi r2,r4,0 |
| // l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */ |
| l.lwz r5,PT_PC(r1) |
| |
| l.lwz r3,0(r5) /* Load insn */ |
| l.srli r4,r3,26 /* Shift left to get the insn opcode */ |
| |
| l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */ |
| l.bf jmp |
| l.sfeqi r4,0x01 |
| l.bf jmp |
| l.sfeqi r4,0x03 |
| l.bf jmp |
| l.sfeqi r4,0x04 |
| l.bf jmp |
| l.sfeqi r4,0x11 |
| l.bf jr |
| l.sfeqi r4,0x12 |
| l.bf jr |
| l.nop |
| l.j 1f |
| l.addi r5,r5,4 /* Increment PC to get return insn address */ |
| |
| jmp: |
| l.slli r4,r3,6 /* Get the signed extended jump length */ |
| l.srai r4,r4,4 |
| |
| l.lwz r3,4(r5) /* Load the real load/store insn */ |
| |
| l.add r5,r5,r4 /* Calculate jump target address */ |
| |
| l.j 1f |
| l.srli r4,r3,26 /* Shift left to get the insn opcode */ |
| |
| jr: |
| l.slli r4,r3,9 /* Shift to get the reg nb */ |
| l.andi r4,r4,0x7c |
| |
| l.lwz r3,4(r5) /* Load the real load/store insn */ |
| |
| l.add r4,r4,r1 /* Load the jump register value from the stack */ |
| l.lwz r5,0(r4) |
| |
| l.srli r4,r3,26 /* Shift left to get the insn opcode */ |
| |
| |
| 1: |
| // l.mtspr r0,r5,SPR_EPCR_BASE |
| l.sw PT_PC(r1),r5 |
| |
| l.sfeqi r4,0x26 |
| l.bf lhs |
| l.sfeqi r4,0x25 |
| l.bf lhz |
| l.sfeqi r4,0x22 |
| l.bf lws |
| l.sfeqi r4,0x21 |
| l.bf lwz |
| l.sfeqi r4,0x37 |
| l.bf sh |
| l.sfeqi r4,0x35 |
| l.bf sw |
| l.nop |
| |
| 1: l.j 1b /* I don't know what to do */ |
| l.nop |
| |
| lhs: l.lbs r5,0(r2) |
| l.slli r5,r5,8 |
| l.lbz r6,1(r2) |
| l.or r5,r5,r6 |
| l.srli r4,r3,19 |
| l.andi r4,r4,0x7c |
| l.add r4,r4,r1 |
| l.j align_end |
| l.sw 0(r4),r5 |
| |
| lhz: l.lbz r5,0(r2) |
| l.slli r5,r5,8 |
| l.lbz r6,1(r2) |
| l.or r5,r5,r6 |
| l.srli r4,r3,19 |
| l.andi r4,r4,0x7c |
| l.add r4,r4,r1 |
| l.j align_end |
| l.sw 0(r4),r5 |
| |
| lws: l.lbs r5,0(r2) |
| l.slli r5,r5,24 |
| l.lbz r6,1(r2) |
| l.slli r6,r6,16 |
| l.or r5,r5,r6 |
| l.lbz r6,2(r2) |
| l.slli r6,r6,8 |
| l.or r5,r5,r6 |
| l.lbz r6,3(r2) |
| l.or r5,r5,r6 |
| l.srli r4,r3,19 |
| l.andi r4,r4,0x7c |
| l.add r4,r4,r1 |
| l.j align_end |
| l.sw 0(r4),r5 |
| |
| lwz: l.lbz r5,0(r2) |
| l.slli r5,r5,24 |
| l.lbz r6,1(r2) |
| l.slli r6,r6,16 |
| l.or r5,r5,r6 |
| l.lbz r6,2(r2) |
| l.slli r6,r6,8 |
| l.or r5,r5,r6 |
| l.lbz r6,3(r2) |
| l.or r5,r5,r6 |
| l.srli r4,r3,19 |
| l.andi r4,r4,0x7c |
| l.add r4,r4,r1 |
| l.j align_end |
| l.sw 0(r4),r5 |
| |
| sh: |
| l.srli r4,r3,9 |
| l.andi r4,r4,0x7c |
| l.add r4,r4,r1 |
| l.lwz r5,0(r4) |
| l.sb 1(r2),r5 |
| l.srli r5,r5,8 |
| l.j align_end |
| l.sb 0(r2),r5 |
| |
| sw: |
| l.srli r4,r3,9 |
| l.andi r4,r4,0x7c |
| l.add r4,r4,r1 |
| l.lwz r5,0(r4) |
| l.sb 3(r2),r5 |
| l.srli r5,r5,8 |
| l.sb 2(r2),r5 |
| l.srli r5,r5,8 |
| l.sb 1(r2),r5 |
| l.srli r5,r5,8 |
| l.j align_end |
| l.sb 0(r2),r5 |
| |
| align_end: |
| l.j _ret_from_intr |
| l.nop |
| #endif |
| |
| /* ---[ 0x700: Illegal insn exception ]---------------------------------- */ |
| |
| EXCEPTION_ENTRY(_illegal_instruction_handler) |
| /* r4: EA of fault (set by EXCEPTION_HANDLE) */ |
| l.jal do_illegal_instruction |
| l.addi r3,r1,0 /* pt_regs */ |
| |
| l.j _ret_from_exception |
| l.nop |
| |
| /* ---[ 0x800: External interrupt exception ]---------------------------- */ |
| |
| EXCEPTION_ENTRY(_external_irq_handler) |
| #ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK |
| l.lwz r4,PT_SR(r1) // were interrupts enabled ? |
| l.andi r4,r4,SPR_SR_IEE |
| l.sfeqi r4,0 |
| l.bnf 1f // ext irq enabled, all ok. |
| l.nop |
| |
| #ifdef CONFIG_PRINTK |
| l.addi r1,r1,-0x8 |
| l.movhi r3,hi(42f) |
| l.ori r3,r3,lo(42f) |
| l.sw 0x0(r1),r3 |
| l.jal printk |
| l.sw 0x4(r1),r4 |
| l.addi r1,r1,0x8 |
| |
| .section .rodata, "a" |
| 42: |
| .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r" |
| .align 4 |
| .previous |
| #endif |
| |
| l.ori r4,r4,SPR_SR_IEE // fix the bug |
| // l.sw PT_SR(r1),r4 |
| 1: |
| #endif |
| l.addi r3,r1,0 |
| l.movhi r8,hi(do_IRQ) |
| l.ori r8,r8,lo(do_IRQ) |
| l.jalr r8 |
| l.nop |
| l.j _ret_from_intr |
| l.nop |
| |
| /* ---[ 0x900: DTLB miss exception ]------------------------------------- */ |
| |
| |
| /* ---[ 0xa00: ITLB miss exception ]------------------------------------- */ |
| |
| |
| /* ---[ 0xb00: Range exception ]----------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0xb00,0xb00) |
| |
| /* ---[ 0xc00: Syscall exception ]--------------------------------------- */ |
| |
| /* |
| * Syscalls are a special type of exception in that they are |
| * _explicitly_ invoked by userspace and can therefore be |
| * held to conform to the same ABI as normal functions with |
| * respect to whether registers are preserved across the call |
| * or not. |
| */ |
| |
| /* Upon syscall entry we just save the callee-saved registers |
| * and not the call-clobbered ones. |
| */ |
| |
| _string_syscall_return: |
| .string "syscall return %ld \n\r\0" |
| .align 4 |
| |
| ENTRY(_sys_call_handler) |
| /* syscalls run with interrupts enabled */ |
| ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp |
| |
| /* r1, EPCR, ESR a already saved */ |
| l.sw PT_GPR2(r1),r2 |
| /* r3-r8 must be saved because syscall restart relies |
| * on us being able to restart the syscall args... technically |
| * they should be clobbered, otherwise |
| */ |
| l.sw PT_GPR3(r1),r3 |
| /* r4 already saved */ |
| /* r4 holds the EEAR address of the fault, load the original r4 */ |
| l.lwz r4,PT_GPR4(r1) |
| l.sw PT_GPR5(r1),r5 |
| l.sw PT_GPR6(r1),r6 |
| l.sw PT_GPR7(r1),r7 |
| l.sw PT_GPR8(r1),r8 |
| l.sw PT_GPR9(r1),r9 |
| /* r10 already saved */ |
| l.sw PT_GPR11(r1),r11 |
| /* orig_gpr11 must be set for syscalls */ |
| l.sw PT_ORIG_GPR11(r1),r11 |
| /* r12,r13 already saved */ |
| |
| /* r14-r28 (even) aren't touched by the syscall fast path below |
| * so we don't need to save them. However, the functions that return |
| * to userspace via a call to switch() DO need to save these because |
| * switch() effectively clobbers them... saving these registers for |
| * such functions is handled in their syscall wrappers (see fork, vfork, |
| * and clone, below). |
| |
| /* r30 is the only register we clobber in the fast path */ |
| /* r30 already saved */ |
| /* l.sw PT_GPR30(r1),r30 */ |
| |
| _syscall_check_trace_enter: |
| /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */ |
| l.lwz r30,TI_FLAGS(r10) |
| l.andi r30,r30,_TIF_SYSCALL_TRACE |
| l.sfne r30,r0 |
| l.bf _syscall_trace_enter |
| l.nop |
| |
| _syscall_check: |
| /* Ensure that the syscall number is reasonable */ |
| l.sfgeui r11,__NR_syscalls |
| l.bf _syscall_badsys |
| l.nop |
| |
| _syscall_call: |
| l.movhi r29,hi(sys_call_table) |
| l.ori r29,r29,lo(sys_call_table) |
| l.slli r11,r11,2 |
| l.add r29,r29,r11 |
| l.lwz r29,0(r29) |
| |
| l.jalr r29 |
| l.nop |
| |
| _syscall_return: |
| /* All syscalls return here... just pay attention to ret_from_fork |
| * which does it in a round-about way. |
| */ |
| l.sw PT_GPR11(r1),r11 // save return value |
| |
| #if 0 |
| _syscall_debug: |
| l.movhi r3,hi(_string_syscall_return) |
| l.ori r3,r3,lo(_string_syscall_return) |
| l.ori r27,r0,1 |
| l.sw -4(r1),r27 |
| l.sw -8(r1),r11 |
| l.addi r1,r1,-8 |
| l.movhi r27,hi(printk) |
| l.ori r27,r27,lo(printk) |
| l.jalr r27 |
| l.nop |
| l.addi r1,r1,8 |
| #endif |
| |
| _syscall_check_trace_leave: |
| /* r30 is a callee-saved register so this should still hold the |
| * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above... |
| * _syscall_trace_leave expects syscall result to be in pt_regs->r11. |
| */ |
| l.sfne r30,r0 |
| l.bf _syscall_trace_leave |
| l.nop |
| |
| /* This is where the exception-return code begins... interrupts need to be |
| * disabled the rest of the way here because we can't afford to miss any |
| * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */ |
| |
| _syscall_check_work: |
| /* Here we need to disable interrupts */ |
| DISABLE_INTERRUPTS(r27,r29) |
| l.lwz r30,TI_FLAGS(r10) |
| l.andi r30,r30,_TIF_WORK_MASK |
| l.sfne r30,r0 |
| |
| l.bnf _syscall_resume_userspace |
| l.nop |
| |
| /* Work pending follows a different return path, so we need to |
| * make sure that all the call-saved registers get into pt_regs |
| * before branching... |
| */ |
| l.sw PT_GPR14(r1),r14 |
| l.sw PT_GPR16(r1),r16 |
| l.sw PT_GPR18(r1),r18 |
| l.sw PT_GPR20(r1),r20 |
| l.sw PT_GPR22(r1),r22 |
| l.sw PT_GPR24(r1),r24 |
| l.sw PT_GPR26(r1),r26 |
| l.sw PT_GPR28(r1),r28 |
| |
| /* _work_pending needs to be called with interrupts disabled */ |
| l.j _work_pending |
| l.nop |
| |
| _syscall_resume_userspace: |
| // ENABLE_INTERRUPTS(r29) |
| |
| |
| /* This is the hot path for returning to userspace from a syscall. If there's |
| * work to be done and the branch to _work_pending was taken above, then the |
| * return to userspace will be done via the normal exception return path... |
| * that path restores _all_ registers and will overwrite the "clobbered" |
| * registers with whatever garbage is in pt_regs -- that's OK because those |
| * registers are clobbered anyway and because the extra work is insignificant |
| * in the context of the extra work that _work_pending is doing. |
| |
| /* Once again, syscalls are special and only guarantee to preserve the |
| * same registers as a normal function call */ |
| |
| /* The assumption here is that the registers r14-r28 (even) are untouched and |
| * don't need to be restored... be sure that that's really the case! |
| */ |
| |
| /* This is still too much... we should only be restoring what we actually |
| * clobbered... we should even be using 'scratch' (odd) regs above so that |
| * we don't need to restore anything, hardly... |
| */ |
| |
| l.lwz r2,PT_GPR2(r1) |
| |
| /* Restore args */ |
| /* r3-r8 are technically clobbered, but syscall restart needs these |
| * to be restored... |
| */ |
| l.lwz r3,PT_GPR3(r1) |
| l.lwz r4,PT_GPR4(r1) |
| l.lwz r5,PT_GPR5(r1) |
| l.lwz r6,PT_GPR6(r1) |
| l.lwz r7,PT_GPR7(r1) |
| l.lwz r8,PT_GPR8(r1) |
| |
| l.lwz r9,PT_GPR9(r1) |
| l.lwz r10,PT_GPR10(r1) |
| l.lwz r11,PT_GPR11(r1) |
| |
| /* r30 is the only register we clobber in the fast path */ |
| l.lwz r30,PT_GPR30(r1) |
| |
| /* Here we use r13-r19 (odd) as scratch regs */ |
| l.lwz r13,PT_PC(r1) |
| l.lwz r15,PT_SR(r1) |
| l.lwz r1,PT_SP(r1) |
| /* Interrupts need to be disabled for setting EPCR and ESR |
| * so that another interrupt doesn't come in here and clobber |
| * them before we can use them for our l.rfe */ |
| DISABLE_INTERRUPTS(r17,r19) |
| l.mtspr r0,r13,SPR_EPCR_BASE |
| l.mtspr r0,r15,SPR_ESR_BASE |
| l.rfe |
| |
| /* End of hot path! |
| * Keep the below tracing and error handling out of the hot path... |
| */ |
| |
| _syscall_trace_enter: |
| /* Here we pass pt_regs to do_syscall_trace_enter. Make sure |
| * that function is really getting all the info it needs as |
| * pt_regs isn't a complete set of userspace regs, just the |
| * ones relevant to the syscall... |
| * |
| * Note use of delay slot for setting argument. |
| */ |
| l.jal do_syscall_trace_enter |
| l.addi r3,r1,0 |
| |
| /* Restore arguments (not preserved across do_syscall_trace_enter) |
| * so that we can do the syscall for real and return to the syscall |
| * hot path. |
| */ |
| l.lwz r11,PT_GPR11(r1) |
| l.lwz r3,PT_GPR3(r1) |
| l.lwz r4,PT_GPR4(r1) |
| l.lwz r5,PT_GPR5(r1) |
| l.lwz r6,PT_GPR6(r1) |
| l.lwz r7,PT_GPR7(r1) |
| |
| l.j _syscall_check |
| l.lwz r8,PT_GPR8(r1) |
| |
| _syscall_trace_leave: |
| l.jal do_syscall_trace_leave |
| l.addi r3,r1,0 |
| |
| l.j _syscall_check_work |
| l.nop |
| |
| _syscall_badsys: |
| /* Here we effectively pretend to have executed an imaginary |
| * syscall that returns -ENOSYS and then return to the regular |
| * syscall hot path. |
| * Note that "return value" is set in the delay slot... |
| */ |
| l.j _syscall_return |
| l.addi r11,r0,-ENOSYS |
| |
| /******* END SYSCALL HANDLING *******/ |
| |
| /* ---[ 0xd00: Trap exception ]------------------------------------------ */ |
| |
| UNHANDLED_EXCEPTION(_vector_0xd00,0xd00) |
| |
| /* ---[ 0xe00: Trap exception ]------------------------------------------ */ |
| |
| EXCEPTION_ENTRY(_trap_handler) |
| /* r4: EA of fault (set by EXCEPTION_HANDLE) */ |
| l.jal do_trap |
| l.addi r3,r1,0 /* pt_regs */ |
| |
| l.j _ret_from_exception |
| l.nop |
| |
| /* ---[ 0xf00: Reserved exception ]-------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0xf00,0xf00) |
| |
| /* ---[ 0x1000: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1000,0x1000) |
| |
| /* ---[ 0x1100: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1100,0x1100) |
| |
| /* ---[ 0x1200: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1200,0x1200) |
| |
| /* ---[ 0x1300: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1300,0x1300) |
| |
| /* ---[ 0x1400: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1400,0x1400) |
| |
| /* ---[ 0x1500: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1500,0x1500) |
| |
| /* ---[ 0x1600: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1600,0x1600) |
| |
| /* ---[ 0x1700: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1700,0x1700) |
| |
| /* ---[ 0x1800: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1800,0x1800) |
| |
| /* ---[ 0x1900: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1900,0x1900) |
| |
| /* ---[ 0x1a00: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00) |
| |
| /* ---[ 0x1b00: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00) |
| |
| /* ---[ 0x1c00: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00) |
| |
| /* ---[ 0x1d00: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00) |
| |
| /* ---[ 0x1e00: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00) |
| |
| /* ---[ 0x1f00: Reserved exception ]------------------------------------- */ |
| |
| UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00) |
| |
| /* ========================================================[ return ] === */ |
| |
| _resume_userspace: |
| DISABLE_INTERRUPTS(r3,r4) |
| l.lwz r4,TI_FLAGS(r10) |
| l.andi r13,r4,_TIF_WORK_MASK |
| l.sfeqi r13,0 |
| l.bf _restore_all |
| l.nop |
| |
| _work_pending: |
| l.lwz r5,PT_ORIG_GPR11(r1) |
| l.sfltsi r5,0 |
| l.bnf 1f |
| l.nop |
| l.andi r5,r5,0 |
| 1: |
| l.jal do_work_pending |
| l.ori r3,r1,0 /* pt_regs */ |
| |
| l.sfeqi r11,0 |
| l.bf _restore_all |
| l.nop |
| l.sfltsi r11,0 |
| l.bnf 1f |
| l.nop |
| l.and r11,r11,r0 |
| l.ori r11,r11,__NR_restart_syscall |
| l.j _syscall_check_trace_enter |
| l.nop |
| 1: |
| l.lwz r11,PT_ORIG_GPR11(r1) |
| /* Restore arg registers */ |
| l.lwz r3,PT_GPR3(r1) |
| l.lwz r4,PT_GPR4(r1) |
| l.lwz r5,PT_GPR5(r1) |
| l.lwz r6,PT_GPR6(r1) |
| l.lwz r7,PT_GPR7(r1) |
| l.j _syscall_check_trace_enter |
| l.lwz r8,PT_GPR8(r1) |
| |
| _restore_all: |
| RESTORE_ALL |
| /* This returns to userspace code */ |
| |
| |
| ENTRY(_ret_from_intr) |
| ENTRY(_ret_from_exception) |
| l.lwz r4,PT_SR(r1) |
| l.andi r3,r4,SPR_SR_SM |
| l.sfeqi r3,0 |
| l.bnf _restore_all |
| l.nop |
| l.j _resume_userspace |
| l.nop |
| |
| ENTRY(ret_from_fork) |
| l.jal schedule_tail |
| l.nop |
| |
| /* Check if we are a kernel thread */ |
| l.sfeqi r20,0 |
| l.bf 1f |
| l.nop |
| |
| /* ...we are a kernel thread so invoke the requested callback */ |
| l.jalr r20 |
| l.or r3,r22,r0 |
| |
| 1: |
| /* _syscall_returns expect r11 to contain return value */ |
| l.lwz r11,PT_GPR11(r1) |
| |
| /* The syscall fast path return expects call-saved registers |
| * r12-r28 to be untouched, so we restore them here as they |
| * will have been effectively clobbered when arriving here |
| * via the call to switch() |
| */ |
| l.lwz r12,PT_GPR12(r1) |
| l.lwz r14,PT_GPR14(r1) |
| l.lwz r16,PT_GPR16(r1) |
| l.lwz r18,PT_GPR18(r1) |
| l.lwz r20,PT_GPR20(r1) |
| l.lwz r22,PT_GPR22(r1) |
| l.lwz r24,PT_GPR24(r1) |
| l.lwz r26,PT_GPR26(r1) |
| l.lwz r28,PT_GPR28(r1) |
| |
| l.j _syscall_return |
| l.nop |
| |
| /* ========================================================[ switch ] === */ |
| |
| /* |
| * This routine switches between two different tasks. The process |
| * state of one is saved on its kernel stack. Then the state |
| * of the other is restored from its kernel stack. The memory |
| * management hardware is updated to the second process's state. |
| * Finally, we can return to the second process, via the 'return'. |
| * |
| * Note: there are two ways to get to the "going out" portion |
| * of this code; either by coming in via the entry (_switch) |
| * or via "fork" which must set up an environment equivalent |
| * to the "_switch" path. If you change this (or in particular, the |
| * SAVE_REGS macro), you'll have to change the fork code also. |
| */ |
| |
| |
| /* _switch MUST never lay on page boundry, cause it runs from |
| * effective addresses and beeing interrupted by iTLB miss would kill it. |
| * dTLB miss seams to never accour in the bad place since data accesses |
| * are from task structures which are always page aligned. |
| * |
| * The problem happens in RESTORE_ALL_NO_R11 where we first set the EPCR |
| * register, then load the previous register values and only at the end call |
| * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets |
| * garbled and we end up calling l.rfe with the wrong EPCR. (same probably |
| * holds for ESR) |
| * |
| * To avoid this problems it is sufficient to align _switch to |
| * some nice round number smaller than it's size... |
| */ |
| |
| /* ABI rules apply here... we either enter _switch via schedule() or via |
| * an imaginary call to which we shall return at return_from_fork. Either |
| * way, we are a function call and only need to preserve the callee-saved |
| * registers when we return. As such, we don't need to save the registers |
| * on the stack that we won't be returning as they were... |
| */ |
| |
| .align 0x400 |
| ENTRY(_switch) |
| /* We don't store SR as _switch only gets called in a context where |
| * the SR will be the same going in and coming out... */ |
| |
| /* Set up new pt_regs struct for saving task state */ |
| l.addi r1,r1,-(INT_FRAME_SIZE) |
| |
| /* No need to store r1/PT_SP as it goes into KSP below */ |
| l.sw PT_GPR2(r1),r2 |
| l.sw PT_GPR9(r1),r9 |
| /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being |
| * and expects r12 to be callee-saved... */ |
| l.sw PT_GPR12(r1),r12 |
| l.sw PT_GPR14(r1),r14 |
| l.sw PT_GPR16(r1),r16 |
| l.sw PT_GPR18(r1),r18 |
| l.sw PT_GPR20(r1),r20 |
| l.sw PT_GPR22(r1),r22 |
| l.sw PT_GPR24(r1),r24 |
| l.sw PT_GPR26(r1),r26 |
| l.sw PT_GPR28(r1),r28 |
| l.sw PT_GPR30(r1),r30 |
| |
| l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/ |
| |
| /* We use thread_info->ksp for storing the address of the above |
| * structure so that we can get back to it later... we don't want |
| * to lose the value of thread_info->ksp, though, so store it as |
| * pt_regs->sp so that we can easily restore it when we are made |
| * live again... |
| */ |
| |
| /* Save the old value of thread_info->ksp as pt_regs->sp */ |
| l.lwz r29,TI_KSP(r10) |
| l.sw PT_SP(r1),r29 |
| |
| /* Swap kernel stack pointers */ |
| l.sw TI_KSP(r10),r1 /* Save old stack pointer */ |
| l.or r10,r4,r0 /* Set up new current_thread_info */ |
| l.lwz r1,TI_KSP(r10) /* Load new stack pointer */ |
| |
| /* Restore the old value of thread_info->ksp */ |
| l.lwz r29,PT_SP(r1) |
| l.sw TI_KSP(r10),r29 |
| |
| /* ...and restore the registers, except r11 because the return value |
| * has already been set above. |
| */ |
| l.lwz r2,PT_GPR2(r1) |
| l.lwz r9,PT_GPR9(r1) |
| /* No need to restore r10 */ |
| /* ...and do not restore r11 */ |
| |
| /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being |
| * and expects r12 to be callee-saved... */ |
| l.lwz r12,PT_GPR12(r1) |
| l.lwz r14,PT_GPR14(r1) |
| l.lwz r16,PT_GPR16(r1) |
| l.lwz r18,PT_GPR18(r1) |
| l.lwz r20,PT_GPR20(r1) |
| l.lwz r22,PT_GPR22(r1) |
| l.lwz r24,PT_GPR24(r1) |
| l.lwz r26,PT_GPR26(r1) |
| l.lwz r28,PT_GPR28(r1) |
| l.lwz r30,PT_GPR30(r1) |
| |
| /* Unwind stack to pre-switch state */ |
| l.addi r1,r1,(INT_FRAME_SIZE) |
| |
| /* Return via the link-register back to where we 'came from', where |
| * that may be either schedule(), ret_from_fork(), or |
| * ret_from_kernel_thread(). If we are returning to a new thread, |
| * we are expected to have set up the arg to schedule_tail already, |
| * hence we do so here unconditionally: |
| */ |
| l.lwz r3,TI_TASK(r3) /* Load 'prev' as schedule_tail arg */ |
| l.jr r9 |
| l.nop |
| |
| /* ==================================================================== */ |
| |
| /* These all use the delay slot for setting the argument register, so the |
| * jump is always happening after the l.addi instruction. |
| * |
| * These are all just wrappers that don't touch the link-register r9, so the |
| * return from the "real" syscall function will return back to the syscall |
| * code that did the l.jal that brought us here. |
| */ |
| |
| /* fork requires that we save all the callee-saved registers because they |
| * are all effectively clobbered by the call to _switch. Here we store |
| * all the registers that aren't touched by the syscall fast path and thus |
| * weren't saved there. |
| */ |
| |
| _fork_save_extra_regs_and_call: |
| l.sw PT_GPR14(r1),r14 |
| l.sw PT_GPR16(r1),r16 |
| l.sw PT_GPR18(r1),r18 |
| l.sw PT_GPR20(r1),r20 |
| l.sw PT_GPR22(r1),r22 |
| l.sw PT_GPR24(r1),r24 |
| l.sw PT_GPR26(r1),r26 |
| l.jr r29 |
| l.sw PT_GPR28(r1),r28 |
| |
| ENTRY(__sys_clone) |
| l.movhi r29,hi(sys_clone) |
| l.ori r29,r29,lo(sys_clone) |
| l.j _fork_save_extra_regs_and_call |
| l.nop |
| |
| ENTRY(__sys_fork) |
| l.movhi r29,hi(sys_fork) |
| l.ori r29,r29,lo(sys_fork) |
| l.j _fork_save_extra_regs_and_call |
| l.nop |
| |
| ENTRY(sys_rt_sigreturn) |
| l.j _sys_rt_sigreturn |
| l.addi r3,r1,0 |
| |
| /* This is a catch-all syscall for atomic instructions for the OpenRISC 1000. |
| * The functions takes a variable number of parameters depending on which |
| * particular flavour of atomic you want... parameter 1 is a flag identifying |
| * the atomic in question. Currently, this function implements the |
| * following variants: |
| * |
| * XCHG: |
| * @flag: 1 |
| * @ptr1: |
| * @ptr2: |
| * Atomically exchange the values in pointers 1 and 2. |
| * |
| */ |
| |
| ENTRY(sys_or1k_atomic) |
| /* FIXME: This ignores r3 and always does an XCHG */ |
| DISABLE_INTERRUPTS(r17,r19) |
| l.lwz r29,0(r4) |
| l.lwz r27,0(r5) |
| l.sw 0(r4),r27 |
| l.sw 0(r5),r29 |
| ENABLE_INTERRUPTS(r17) |
| l.jr r9 |
| l.or r11,r0,r0 |
| |
| /* ============================================================[ EOF ]=== */ |