blob: 5689fb23bbab7cc9e93a216dde6ce9f577b3bc42 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada 8040 Development board platform
*/
#include <dt-bindings/gpio/gpio.h>
#include "armada-8040.dtsi"
/ {
model = "Marvell Armada 8040 DB board";
compatible = "marvell,armada8040-db", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
aliases {
ethernet0 = &cp0_eth0;
ethernet1 = &cp0_eth2;
ethernet2 = &cp1_eth0;
ethernet3 = &cp1_eth1;
};
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cp0-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "cp0-usb3h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
cp0_usb3_0_phy: cp0-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_0_vbus>;
};
cp0_usb3_1_phy: cp0-usb3-1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_1_vbus>;
};
cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cp1-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
};
cp1_usb3_0_phy: cp1-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp1_reg_usb3_0_vbus>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xce0000>;
};
};
};
};
/* Accessible over the mini-USB CON9 connector on the main board */
&uart0 {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
/* CON6 on CP0 expansion */
&cp0_pcie0 {
status = "okay";
};
/* CON5 on CP0 expansion */
&cp0_pcie2 {
status = "okay";
};
&cp0_i2c0 {
status = "okay";
clock-frequency = <100000>;
/* U31 */
expander0: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x21>;
};
/* U25 */
expander1: pca9555@25 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x25>;
};
};
/* CON4 on CP0 expansion */
&cp0_sata0 {
status = "okay";
};
/* CON9 on CP0 expansion */
&cp0_usb3_0 {
usb-phy = <&cp0_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP0 expansion */
&cp0_usb3_1 {
usb-phy = <&cp0_usb3_1_phy>;
status = "okay";
};
&cp0_mdio {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
};
&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
/* CON6 on CP1 expansion */
&cp1_pcie0 {
status = "okay";
};
/* CON7 on CP1 expansion */
&cp1_pcie1 {
status = "okay";
};
/* CON5 on CP1 expansion */
&cp1_pcie2 {
status = "okay";
};
&cp1_i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&cp1_spi1 {
status = "okay";
spi-flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Boot";
reg = <0x0 0x200000>;
};
partition@200000 {
label = "Filesystem";
reg = <0x200000 0xd00000>;
};
partition@f00000 {
label = "Boot_2nd";
reg = <0xf00000 0x100000>;
};
};
};
};
/*
* Proper NAND usage will require DPR-76 to be in position 1-2, which disables
* MDIO signal of CP1.
*/
&cp1_nand_controller {
pinctrl-0 = <&nand_pins>, <&nand_rb>;
pinctrl-names = "default";
nand@0 {
reg = <0>;
nand-rb = <0>;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x200000>;
};
partition@200000 {
label = "Linux";
reg = <0x200000 0xe00000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
};
};
/* CON4 on CP1 expansion */
&cp1_sata0 {
status = "okay";
};
/* CON9 on CP1 expansion */
&cp1_usb3_0 {
usb-phy = <&cp1_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP1 expansion */
&cp1_usb3_1 {
status = "okay";
};
&cp1_mdio {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&cp1_ethernet {
status = "okay";
};
&cp1_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
};
&cp1_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
non-removable;
};
&cp0_sdhci0 {
status = "okay";
bus-width = <8>;
non-removable;
};