blob: d8a982b71296520fd0344e9670e1f88b4b342b7d [file] [log] [blame]
/*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
*
* DRM core CRTC related functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Keith Packard
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include "drmP.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
/*
* Detailed mode info for 800x600@60Hz
*/
static struct drm_display_mode std_mode[] = {
{ DRM_MODE("800x600", DRM_MODE_TYPE_DEFAULT, 40000, 800, 840,
968, 1056, 0, 600, 601, 605, 628, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
};
/**
* drm_helper_probe_connector_modes - get complete set of display modes
* @dev: DRM device
* @maxX: max width for modes
* @maxY: max height for modes
*
* LOCKING:
* Caller must hold mode config lock.
*
* Based on @dev's mode_config layout, scan all the connectors and try to detect
* modes on them. Modes will first be added to the connector's probed_modes
* list, then culled (based on validity and the @maxX, @maxY parameters) and
* put into the normal modes list.
*
* Intended to be used either at bootup time or when major configuration
* changes have occurred.
*
* FIXME: take into account monitor limits
*/
void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
uint32_t maxX, uint32_t maxY)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode, *t;
struct drm_connector_helper_funcs *connector_funcs =
connector->helper_private;
int ret;
DRM_DEBUG("%s\n", drm_get_connector_name(connector));
/* set all modes to the unverified state */
list_for_each_entry_safe(mode, t, &connector->modes, head)
mode->status = MODE_UNVERIFIED;
connector->status = connector->funcs->detect(connector);
if (connector->status == connector_status_disconnected) {
DRM_DEBUG("%s is disconnected\n",
drm_get_connector_name(connector));
/* TODO set EDID to NULL */
return;
}
ret = (*connector_funcs->get_modes)(connector);
if (ret) {
drm_mode_connector_list_update(connector);
}
if (maxX && maxY)
drm_mode_validate_size(dev, &connector->modes, maxX,
maxY, 0);
list_for_each_entry_safe(mode, t, &connector->modes, head) {
if (mode->status == MODE_OK)
mode->status = connector_funcs->mode_valid(connector,
mode);
}
drm_mode_prune_invalid(dev, &connector->modes, true);
if (list_empty(&connector->modes)) {
struct drm_display_mode *stdmode;
DRM_DEBUG("No valid modes on %s\n",
drm_get_connector_name(connector));
/* Should we do this here ???
* When no valid EDID modes are available we end up
* here and bailed in the past, now we add a standard
* 640x480@60Hz mode and carry on.
*/
stdmode = drm_mode_duplicate(dev, &std_mode[0]);
drm_mode_probed_add(connector, stdmode);
drm_mode_list_concat(&connector->probed_modes,
&connector->modes);
DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n",
drm_get_connector_name(connector));
}
drm_mode_sort(&connector->modes);
DRM_DEBUG("Probed modes for %s\n", drm_get_connector_name(connector));
list_for_each_entry_safe(mode, t, &connector->modes, head) {
mode->vrefresh = drm_mode_vrefresh(mode);
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
drm_mode_debug_printmodeline(mode);
}
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
uint32_t maxY)
{
struct drm_connector *connector;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
drm_helper_probe_single_connector_modes(connector, maxX, maxY);
}
}
EXPORT_SYMBOL(drm_helper_probe_connector_modes);
/**
* drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
* @crtc: CRTC to check
*
* LOCKING:
* Caller must hold mode config lock.
*
* Walk @crtc's DRM device's mode_config and see if it's in use.
*
* RETURNS:
* True if @crtc is part of the mode_config, false otherwise.
*/
bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
{
struct drm_encoder *encoder;
struct drm_device *dev = crtc->dev;
/* FIXME: Locking around list access? */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
if (encoder->crtc == crtc)
return true;
return false;
}
EXPORT_SYMBOL(drm_helper_crtc_in_use);
/**
* drm_disable_unused_functions - disable unused objects
* @dev: DRM device
*
* LOCKING:
* Caller must hold mode config lock.
*
* If an connector or CRTC isn't part of @dev's mode_config, it can be disabled
* by calling its dpms function, which should power it off.
*/
void drm_helper_disable_unused_functions(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct drm_encoder_helper_funcs *encoder_funcs;
struct drm_crtc *crtc;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
encoder_funcs = encoder->helper_private;
if (!encoder->crtc)
(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
}
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc->enabled = drm_helper_crtc_in_use(crtc);
if (!crtc->enabled) {
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
crtc->fb = NULL;
}
}
}
EXPORT_SYMBOL(drm_helper_disable_unused_functions);
static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *connector, int width, int height)
{
struct drm_display_mode *mode;
list_for_each_entry(mode, &connector->modes, head) {
if (drm_mode_width(mode) > width ||
drm_mode_height(mode) > height)
continue;
if (mode->type & DRM_MODE_TYPE_PREFERRED)
return mode;
}
return NULL;
}
static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
{
bool enable;
if (strict) {
enable = connector->status == connector_status_connected;
} else {
enable = connector->status != connector_status_disconnected;
}
return enable;
}
static void drm_enable_connectors(struct drm_device *dev, bool *enabled)
{
bool any_enabled = false;
struct drm_connector *connector;
int i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
enabled[i] = drm_connector_enabled(connector, true);
any_enabled |= enabled[i];
i++;
}
if (any_enabled)
return;
i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
enabled[i] = drm_connector_enabled(connector, false);
i++;
}
}
static bool drm_target_preferred(struct drm_device *dev,
struct drm_display_mode **modes,
bool *enabled, int width, int height)
{
struct drm_connector *connector;
int i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (enabled[i] == false) {
i++;
continue;
}
modes[i] = drm_has_preferred_mode(connector, width, height);
if (!modes[i]) {
list_for_each_entry(modes[i], &connector->modes, head)
break;
}
i++;
}
return true;
}
static int drm_pick_crtcs(struct drm_device *dev,
struct drm_crtc **best_crtcs,
struct drm_display_mode **modes,
int n, int width, int height)
{
int c, o;
struct drm_connector *connector;
struct drm_connector_helper_funcs *connector_funcs;
struct drm_encoder *encoder;
struct drm_crtc *best_crtc;
int my_score, best_score, score;
struct drm_crtc **crtcs, *crtc;
if (n == dev->mode_config.num_connector)
return 0;
c = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (c == n)
break;
c++;
}
best_crtcs[n] = NULL;
best_crtc = NULL;
best_score = drm_pick_crtcs(dev, best_crtcs, modes, n+1, width, height);
if (modes[n] == NULL)
return best_score;
crtcs = kmalloc(dev->mode_config.num_connector *
sizeof(struct drm_crtc *), GFP_KERNEL);
if (!crtcs)
return best_score;
my_score = 1;
if (connector->status == connector_status_connected)
my_score++;
if (drm_has_preferred_mode(connector, width, height))
my_score++;
connector_funcs = connector->helper_private;
encoder = connector_funcs->best_encoder(connector);
if (!encoder)
goto out;
connector->encoder = encoder;
/* select a crtc for this connector and then attempt to configure
remaining connectors */
c = 0;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if ((connector->encoder->possible_crtcs & (1 << c)) == 0) {
c++;
continue;
}
for (o = 0; o < n; o++)
if (best_crtcs[o] == crtc)
break;
if (o < n) {
/* ignore cloning for now */
c++;
continue;
}
crtcs[n] = crtc;
memcpy(crtcs, best_crtcs, n * sizeof(struct drm_crtc *));
score = my_score + drm_pick_crtcs(dev, crtcs, modes, n + 1,
width, height);
if (score > best_score) {
best_crtc = crtc;
best_score = score;
memcpy(best_crtcs, crtcs,
dev->mode_config.num_connector *
sizeof(struct drm_crtc *));
}
c++;
}
out:
kfree(crtcs);
return best_score;
}
static void drm_setup_crtcs(struct drm_device *dev)
{
struct drm_crtc **crtcs;
struct drm_display_mode **modes;
struct drm_encoder *encoder;
struct drm_connector *connector;
bool *enabled;
int width, height;
int i, ret;
width = dev->mode_config.max_width;
height = dev->mode_config.max_height;
/* clean out all the encoder/crtc combos */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
encoder->crtc = NULL;
}
crtcs = kcalloc(dev->mode_config.num_connector,
sizeof(struct drm_crtc *), GFP_KERNEL);
modes = kcalloc(dev->mode_config.num_connector,
sizeof(struct drm_display_mode *), GFP_KERNEL);
enabled = kcalloc(dev->mode_config.num_connector,
sizeof(bool), GFP_KERNEL);
drm_enable_connectors(dev, enabled);
ret = drm_target_preferred(dev, modes, enabled, width, height);
if (!ret)
DRM_ERROR("Unable to find initial modes\n");
drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct drm_display_mode *mode = modes[i];
struct drm_crtc *crtc = crtcs[i];
if (connector->encoder == NULL) {
i++;
continue;
}
if (mode && crtc) {
crtc->desired_mode = mode;
connector->encoder->crtc = crtc;
} else
connector->encoder->crtc = NULL;
i++;
}
kfree(crtcs);
kfree(modes);
kfree(enabled);
}
/**
* drm_crtc_set_mode - set a mode
* @crtc: CRTC to program
* @mode: mode to use
* @x: width of mode
* @y: height of mode
*
* LOCKING:
* Caller must hold mode config lock.
*
* Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
* to fixup or reject the mode prior to trying to set it.
*
* RETURNS:
* True if the mode was set successfully, or false otherwise.
*/
bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
struct drm_display_mode *mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_display_mode *adjusted_mode, saved_mode;
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
struct drm_encoder_helper_funcs *encoder_funcs;
int saved_x, saved_y;
struct drm_encoder *encoder;
bool ret = true;
adjusted_mode = drm_mode_duplicate(dev, mode);
crtc->enabled = drm_helper_crtc_in_use(crtc);
if (!crtc->enabled)
return true;
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
/* Update crtc values up front so the driver can rely on them for mode
* setting.
*/
crtc->mode = *mode;
crtc->x = x;
crtc->y = y;
if (drm_mode_equal(&saved_mode, &crtc->mode)) {
if (saved_x != crtc->x || saved_y != crtc->y) {
crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
old_fb);
goto done;
}
}
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
*/
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
encoder_funcs = encoder->helper_private;
if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
adjusted_mode))) {
goto done;
}
}
if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
goto done;
}
/* Prepare the encoders and CRTCs before setting the mode. */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
encoder_funcs = encoder->helper_private;
/* Disable the encoders as the first thing we do. */
encoder_funcs->prepare(encoder);
}
crtc_funcs->prepare(crtc);
/* Set up the DPLL and any encoders state that needs to adjust or depend
* on the DPLL.
*/
crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
mode->name, mode->base.id);
encoder_funcs = encoder->helper_private;
encoder_funcs->mode_set(encoder, mode, adjusted_mode);
}
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
crtc_funcs->commit(crtc);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
encoder_funcs = encoder->helper_private;
encoder_funcs->commit(encoder);
}
/* XXX free adjustedmode */
drm_mode_destroy(dev, adjusted_mode);
/* FIXME: add subpixel order */
done:
if (!ret) {
crtc->mode = saved_mode;
crtc->x = saved_x;
crtc->y = saved_y;
}
return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_mode);
/**
* drm_crtc_helper_set_config - set a new config from userspace
* @crtc: CRTC to setup
* @crtc_info: user provided configuration
* @new_mode: new mode to set
* @connector_set: set of connectors for the new config
* @fb: new framebuffer
*
* LOCKING:
* Caller must hold mode config lock.
*
* Setup a new configuration, provided by the user in @crtc_info, and enable
* it.
*
* RETURNS:
* Zero. (FIXME)
*/
int drm_crtc_helper_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_crtc **save_crtcs, *new_crtc;
struct drm_encoder **save_encoders, *new_encoder;
struct drm_framebuffer *old_fb;
bool save_enabled;
bool changed = false;
bool flip_or_move = false;
struct drm_connector *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
int ret = 0;
DRM_DEBUG("\n");
if (!set)
return -EINVAL;
if (!set->crtc)
return -EINVAL;
if (!set->crtc->helper_private)
return -EINVAL;
crtc_funcs = set->crtc->helper_private;
DRM_DEBUG("crtc: %p %d fb: %p connectors: %p num_connectors: %d (x, y) (%i, %i)\n",
set->crtc, set->crtc->base.id, set->fb, set->connectors,
(int)set->num_connectors, set->x, set->y);
dev = set->crtc->dev;
/* save previous config */
save_enabled = set->crtc->enabled;
/* this is meant to be num_connector not num_crtc */
save_crtcs = kzalloc(dev->mode_config.num_connector *
sizeof(struct drm_crtc *), GFP_KERNEL);
if (!save_crtcs)
return -ENOMEM;
save_encoders = kzalloc(dev->mode_config.num_connector *
sizeof(struct drm_encoders *), GFP_KERNEL);
if (!save_encoders) {
kfree(save_crtcs);
return -ENOMEM;
}
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
/* if we have no fb then its a change not a flip */
if (set->crtc->fb == NULL)
changed = true;
else
flip_or_move = true;
}
if (set->x != set->crtc->x || set->y != set->crtc->y)
flip_or_move = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
DRM_DEBUG("modes are different\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
changed = true;
}
/* a) traverse passed in connector list and get encoders for them */
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct drm_connector_helper_funcs *connector_funcs =
connector->helper_private;
save_encoders[count++] = connector->encoder;
new_encoder = connector->encoder;
for (ro = 0; ro < set->num_connectors; ro++) {
if (set->connectors[ro] == connector) {
new_encoder = connector_funcs->best_encoder(connector);
/* if we can't get an encoder for a connector
we are setting now - then fail */
if (new_encoder == NULL)
/* don't break so fail path works correct */
fail = 1;
break;
}
}
if (new_encoder != connector->encoder) {
changed = true;
connector->encoder = new_encoder;
}
}
if (fail) {
ret = -EINVAL;
goto fail_no_encoder;
}
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder)
continue;
save_crtcs[count++] = connector->encoder->crtc;
if (connector->encoder->crtc == set->crtc)
new_crtc = NULL;
else
new_crtc = connector->encoder->crtc;
for (ro = 0; ro < set->num_connectors; ro++) {
if (set->connectors[ro] == connector)
new_crtc = set->crtc;
}
if (new_crtc != connector->encoder->crtc) {
changed = true;
connector->encoder->crtc = new_crtc;
}
}
/* mode_set_base is not a required function */
if (flip_or_move && !crtc_funcs->mode_set_base)
changed = true;
if (changed) {
old_fb = set->crtc->fb;
set->crtc->fb = set->fb;
set->crtc->enabled = (set->mode != NULL);
if (set->mode != NULL) {
DRM_DEBUG("attempting to set mode from userspace\n");
drm_mode_debug_printmodeline(set->mode);
if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
set->x, set->y,
old_fb)) {
ret = -EINVAL;
goto fail_set_mode;
}
/* TODO are these needed? */
set->crtc->desired_x = set->x;
set->crtc->desired_y = set->y;
set->crtc->desired_mode = set->mode;
}
drm_helper_disable_unused_functions(dev);
} else if (flip_or_move) {
old_fb = set->crtc->fb;
if (set->crtc->fb != set->fb)
set->crtc->fb = set->fb;
crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb);
}
kfree(save_encoders);
kfree(save_crtcs);
return 0;
fail_set_mode:
set->crtc->enabled = save_enabled;
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
connector->encoder->crtc = save_crtcs[count++];
fail_no_encoder:
kfree(save_crtcs);
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
connector->encoder = save_encoders[count++];
}
kfree(save_encoders);
return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_config);
bool drm_helper_plugged_event(struct drm_device *dev)
{
DRM_DEBUG("\n");
drm_helper_probe_connector_modes(dev, dev->mode_config.max_width,
dev->mode_config.max_height);
drm_setup_crtcs(dev);
/* alert the driver fb layer */
dev->mode_config.funcs->fb_changed(dev);
/* FIXME: send hotplug event */
return true;
}
/**
* drm_initial_config - setup a sane initial connector configuration
* @dev: DRM device
* @can_grow: this configuration is growable
*
* LOCKING:
* Called at init time, must take mode config lock.
*
* Scan the CRTCs and connectors and try to put together an initial setup.
* At the moment, this is a cloned configuration across all heads with
* a new framebuffer object as the backing store.
*
* RETURNS:
* Zero if everything went ok, nonzero otherwise.
*/
bool drm_helper_initial_config(struct drm_device *dev, bool can_grow)
{
int ret = false;
drm_helper_plugged_event(dev);
return ret;
}
EXPORT_SYMBOL(drm_helper_initial_config);
/**
* drm_hotplug_stage_two
* @dev DRM device
* @connector hotpluged connector
*
* LOCKING.
* Caller must hold mode config lock, function might grab struct lock.
*
* Stage two of a hotplug.
*
* RETURNS:
* Zero on success, errno on failure.
*/
int drm_helper_hotplug_stage_two(struct drm_device *dev)
{
drm_helper_plugged_event(dev);
return 0;
}
EXPORT_SYMBOL(drm_helper_hotplug_stage_two);
int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
struct drm_mode_fb_cmd *mode_cmd)
{
fb->width = mode_cmd->width;
fb->height = mode_cmd->height;
fb->pitch = mode_cmd->pitch;
fb->bits_per_pixel = mode_cmd->bpp;
fb->depth = mode_cmd->depth;
return 0;
}
EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
int drm_helper_resume_force_mode(struct drm_device *dev)
{
struct drm_crtc *crtc;
int ret;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!crtc->enabled)
continue;
ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
crtc->x, crtc->y, crtc->fb);
if (ret == false)
DRM_ERROR("failed to set mode on crtc %p\n", crtc);
}
return 0;
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);