| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * A ptrace test for testing PTRACE_SYSEMU, PTRACE_SETREGS and | |
| * PTRACE_GETREG. This test basically create a child process that executes | |
| * syscalls and the parent process check if it is being traced appropriated. | |
| * | |
| * This test is heavily based on tools/testing/selftests/x86/ptrace_syscall.c | |
| * test, and it was adapted to run on Powerpc by | |
| * Breno Leitao <leitao@debian.org> | |
| */ | |
| #define _GNU_SOURCE | |
| #include <sys/ptrace.h> | |
| #include <sys/types.h> | |
| #include <sys/wait.h> | |
| #include <sys/syscall.h> | |
| #include <sys/user.h> | |
| #include <unistd.h> | |
| #include <errno.h> | |
| #include <stddef.h> | |
| #include <stdio.h> | |
| #include <err.h> | |
| #include <string.h> | |
| #include <sys/auxv.h> | |
| #include "utils.h" | |
| /* Bitness-agnostic defines for user_regs_struct fields. */ | |
| #define user_syscall_nr gpr[0] | |
| #define user_arg0 gpr[3] | |
| #define user_arg1 gpr[4] | |
| #define user_arg2 gpr[5] | |
| #define user_arg3 gpr[6] | |
| #define user_arg4 gpr[7] | |
| #define user_arg5 gpr[8] | |
| #define user_ip nip | |
| #define PTRACE_SYSEMU 0x1d | |
| static int nerrs; | |
| static void wait_trap(pid_t chld) | |
| { | |
| siginfo_t si; | |
| if (waitid(P_PID, chld, &si, WEXITED|WSTOPPED) != 0) | |
| err(1, "waitid"); | |
| if (si.si_pid != chld) | |
| errx(1, "got unexpected pid in event\n"); | |
| if (si.si_code != CLD_TRAPPED) | |
| errx(1, "got unexpected event type %d\n", si.si_code); | |
| } | |
| static void test_ptrace_syscall_restart(void) | |
| { | |
| int status; | |
| struct pt_regs regs; | |
| pid_t chld; | |
| printf("[RUN]\tptrace-induced syscall restart\n"); | |
| chld = fork(); | |
| if (chld < 0) | |
| err(1, "fork"); | |
| /* | |
| * Child process is running 4 syscalls after ptrace. | |
| * | |
| * 1) getpid() | |
| * 2) gettid() | |
| * 3) tgkill() -> Send SIGSTOP | |
| * 4) gettid() -> Where the tests will happen essentially | |
| */ | |
| if (chld == 0) { | |
| if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0) | |
| err(1, "PTRACE_TRACEME"); | |
| pid_t pid = getpid(), tid = syscall(SYS_gettid); | |
| printf("\tChild will make one syscall\n"); | |
| syscall(SYS_tgkill, pid, tid, SIGSTOP); | |
| syscall(SYS_gettid, 10, 11, 12, 13, 14, 15); | |
| _exit(0); | |
| } | |
| /* Parent process below */ | |
| /* Wait for SIGSTOP sent by tgkill above. */ | |
| if (waitpid(chld, &status, 0) != chld || !WIFSTOPPED(status)) | |
| err(1, "waitpid"); | |
| printf("[RUN]\tSYSEMU\n"); | |
| if (ptrace(PTRACE_SYSEMU, chld, 0, 0) != 0) | |
| err(1, "PTRACE_SYSEMU"); | |
| wait_trap(chld); | |
| if (ptrace(PTRACE_GETREGS, chld, 0, ®s) != 0) | |
| err(1, "PTRACE_GETREGS"); | |
| /* | |
| * Ptrace trapped prior to executing the syscall, thus r3 still has | |
| * the syscall number instead of the sys_gettid() result | |
| */ | |
| if (regs.user_syscall_nr != SYS_gettid || | |
| regs.user_arg0 != 10 || regs.user_arg1 != 11 || | |
| regs.user_arg2 != 12 || regs.user_arg3 != 13 || | |
| regs.user_arg4 != 14 || regs.user_arg5 != 15) { | |
| printf("[FAIL]\tInitial args are wrong (nr=%lu, args=%lu %lu %lu %lu %lu %lu)\n", | |
| (unsigned long)regs.user_syscall_nr, | |
| (unsigned long)regs.user_arg0, | |
| (unsigned long)regs.user_arg1, | |
| (unsigned long)regs.user_arg2, | |
| (unsigned long)regs.user_arg3, | |
| (unsigned long)regs.user_arg4, | |
| (unsigned long)regs.user_arg5); | |
| nerrs++; | |
| } else { | |
| printf("[OK]\tInitial nr and args are correct\n"); } | |
| printf("[RUN]\tRestart the syscall (ip = 0x%lx)\n", | |
| (unsigned long)regs.user_ip); | |
| /* | |
| * Rewind to retry the same syscall again. This will basically test | |
| * the rewind process together with PTRACE_SETREGS and PTRACE_GETREGS. | |
| */ | |
| regs.user_ip -= 4; | |
| if (ptrace(PTRACE_SETREGS, chld, 0, ®s) != 0) | |
| err(1, "PTRACE_SETREGS"); | |
| if (ptrace(PTRACE_SYSEMU, chld, 0, 0) != 0) | |
| err(1, "PTRACE_SYSEMU"); | |
| wait_trap(chld); | |
| if (ptrace(PTRACE_GETREGS, chld, 0, ®s) != 0) | |
| err(1, "PTRACE_GETREGS"); | |
| if (regs.user_syscall_nr != SYS_gettid || | |
| regs.user_arg0 != 10 || regs.user_arg1 != 11 || | |
| regs.user_arg2 != 12 || regs.user_arg3 != 13 || | |
| regs.user_arg4 != 14 || regs.user_arg5 != 15) { | |
| printf("[FAIL]\tRestart nr or args are wrong (nr=%lu, args=%lu %lu %lu %lu %lu %lu)\n", | |
| (unsigned long)regs.user_syscall_nr, | |
| (unsigned long)regs.user_arg0, | |
| (unsigned long)regs.user_arg1, | |
| (unsigned long)regs.user_arg2, | |
| (unsigned long)regs.user_arg3, | |
| (unsigned long)regs.user_arg4, | |
| (unsigned long)regs.user_arg5); | |
| nerrs++; | |
| } else { | |
| printf("[OK]\tRestarted nr and args are correct\n"); | |
| } | |
| printf("[RUN]\tChange nr and args and restart the syscall (ip = 0x%lx)\n", | |
| (unsigned long)regs.user_ip); | |
| /* | |
| * Inject a new syscall (getpid) in the same place the previous | |
| * syscall (gettid), rewind and re-execute. | |
| */ | |
| regs.user_syscall_nr = SYS_getpid; | |
| regs.user_arg0 = 20; | |
| regs.user_arg1 = 21; | |
| regs.user_arg2 = 22; | |
| regs.user_arg3 = 23; | |
| regs.user_arg4 = 24; | |
| regs.user_arg5 = 25; | |
| regs.user_ip -= 4; | |
| if (ptrace(PTRACE_SETREGS, chld, 0, ®s) != 0) | |
| err(1, "PTRACE_SETREGS"); | |
| if (ptrace(PTRACE_SYSEMU, chld, 0, 0) != 0) | |
| err(1, "PTRACE_SYSEMU"); | |
| wait_trap(chld); | |
| if (ptrace(PTRACE_GETREGS, chld, 0, ®s) != 0) | |
| err(1, "PTRACE_GETREGS"); | |
| /* Check that ptrace stopped at the new syscall that was | |
| * injected, and guarantee that it haven't executed, i.e, user_args | |
| * contain the arguments and not the syscall return value, for | |
| * instance. | |
| */ | |
| if (regs.user_syscall_nr != SYS_getpid | |
| || regs.user_arg0 != 20 || regs.user_arg1 != 21 | |
| || regs.user_arg2 != 22 || regs.user_arg3 != 23 | |
| || regs.user_arg4 != 24 || regs.user_arg5 != 25) { | |
| printf("[FAIL]\tRestart nr or args are wrong (nr=%lu, args=%lu %lu %lu %lu %lu %lu)\n", | |
| (unsigned long)regs.user_syscall_nr, | |
| (unsigned long)regs.user_arg0, | |
| (unsigned long)regs.user_arg1, | |
| (unsigned long)regs.user_arg2, | |
| (unsigned long)regs.user_arg3, | |
| (unsigned long)regs.user_arg4, | |
| (unsigned long)regs.user_arg5); | |
| nerrs++; | |
| } else { | |
| printf("[OK]\tReplacement nr and args are correct\n"); | |
| } | |
| if (ptrace(PTRACE_CONT, chld, 0, 0) != 0) | |
| err(1, "PTRACE_CONT"); | |
| if (waitpid(chld, &status, 0) != chld) | |
| err(1, "waitpid"); | |
| /* Guarantee that the process executed properly, returning 0 */ | |
| if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { | |
| printf("[FAIL]\tChild failed\n"); | |
| nerrs++; | |
| } else { | |
| printf("[OK]\tChild exited cleanly\n"); | |
| } | |
| } | |
| int ptrace_syscall(void) | |
| { | |
| test_ptrace_syscall_restart(); | |
| return nerrs; | |
| } | |
| int main(void) | |
| { | |
| return test_harness(ptrace_syscall, "ptrace_syscall"); | |
| } |