| # SPDX-License-Identifier: GPL-2.0-only | |
| # Helper to resolve issues with configs that have SPI enabled but I2C | |
| # modular, meaning we can't build the codec driver in with I2C support. | |
| # We use an ordered list of conditional defaults to pick the appropriate | |
| # setting - SPI can't be modular so that case doesn't need to be covered. | |
| config SND_SOC_I2C_AND_SPI | |
| tristate | |
| default m if I2C=m | |
| default y if I2C=y | |
| default y if SPI_MASTER=y | |
| menu "CODEC drivers" | |
| config SND_SOC_ALL_CODECS | |
| tristate "Build all ASoC CODEC drivers" | |
| depends on COMPILE_TEST | |
| imply SND_SOC_88PM860X | |
| imply SND_SOC_AB8500_CODEC | |
| imply SND_SOC_AC97_CODEC | |
| imply SND_SOC_AD1836 | |
| imply SND_SOC_AD193X_SPI | |
| imply SND_SOC_AD193X_I2C | |
| imply SND_SOC_AD1980 | |
| imply SND_SOC_AD73311 | |
| imply SND_SOC_ADAU1372_I2C | |
| imply SND_SOC_ADAU1372_SPI | |
| imply SND_SOC_ADAU1373 | |
| imply SND_SOC_ADAU1761_I2C | |
| imply SND_SOC_ADAU1761_SPI | |
| imply SND_SOC_ADAU1781_I2C | |
| imply SND_SOC_ADAU1781_SPI | |
| imply SND_SOC_ADAV801 | |
| imply SND_SOC_ADAV803 | |
| imply SND_SOC_ADAU1977_SPI | |
| imply SND_SOC_ADAU1977_I2C | |
| imply SND_SOC_ADAU1701 | |
| imply SND_SOC_ADAU7002 | |
| imply SND_SOC_ADAU7118_I2C | |
| imply SND_SOC_ADAU7118_HW | |
| imply SND_SOC_ADS117X | |
| imply SND_SOC_AK4104 | |
| imply SND_SOC_AK4118 | |
| imply SND_SOC_AK4375 | |
| imply SND_SOC_AK4458 | |
| imply SND_SOC_AK4535 | |
| imply SND_SOC_AK4554 | |
| imply SND_SOC_AK4613 | |
| imply SND_SOC_AK4619 | |
| imply SND_SOC_AK4642 | |
| imply SND_SOC_AK4671 | |
| imply SND_SOC_AK5386 | |
| imply SND_SOC_AK5558 | |
| imply SND_SOC_ALC5623 | |
| imply SND_SOC_ALC5632 | |
| imply SND_SOC_AUDIO_IIO_AUX | |
| imply SND_SOC_AW8738 | |
| imply SND_SOC_AW87390 | |
| imply SND_SOC_AW88395 | |
| imply SND_SOC_AW88081 | |
| imply SND_SOC_AW88166 | |
| imply SND_SOC_AW88261 | |
| imply SND_SOC_AW88399 | |
| imply SND_SOC_BT_SCO | |
| imply SND_SOC_BD28623 | |
| imply SND_SOC_CHV3_CODEC | |
| imply SND_SOC_CQ0093VC | |
| imply SND_SOC_CROS_EC_CODEC | |
| imply SND_SOC_CS35L32 | |
| imply SND_SOC_CS35L33 | |
| imply SND_SOC_CS35L34 | |
| imply SND_SOC_CS35L35 | |
| imply SND_SOC_CS35L36 | |
| imply SND_SOC_CS35L41_SPI | |
| imply SND_SOC_CS35L41_I2C | |
| imply SND_SOC_CS35L45_I2C | |
| imply SND_SOC_CS35L45_SPI | |
| imply SND_SOC_CS35L56_I2C | |
| imply SND_SOC_CS35L56_SPI | |
| imply SND_SOC_CS35L56_SDW | |
| imply SND_SOC_CS40L50 | |
| imply SND_SOC_CS42L42 | |
| imply SND_SOC_CS42L42_SDW | |
| imply SND_SOC_CS42L43 | |
| imply SND_SOC_CS42L43_SDW | |
| imply SND_SOC_CS42L51_I2C | |
| imply SND_SOC_CS42L52 | |
| imply SND_SOC_CS42L56 | |
| imply SND_SOC_CS42L73 | |
| imply SND_SOC_CS42L84 | |
| imply SND_SOC_CS4234 | |
| imply SND_SOC_CS4265 | |
| imply SND_SOC_CS4270 | |
| imply SND_SOC_CS4271_I2C | |
| imply SND_SOC_CS4271_SPI | |
| imply SND_SOC_CS42XX8_I2C | |
| imply SND_SOC_CS42XX8_SPI | |
| imply SND_SOC_CS43130 | |
| imply SND_SOC_CS4341 | |
| imply SND_SOC_CS4349 | |
| imply SND_SOC_CS47L15 | |
| imply SND_SOC_CS47L24 | |
| imply SND_SOC_CS47L35 | |
| imply SND_SOC_CS47L85 | |
| imply SND_SOC_CS47L90 | |
| imply SND_SOC_CS47L92 | |
| imply SND_SOC_CS48L32 | |
| imply SND_SOC_CS53L30 | |
| imply SND_SOC_CS530X_I2C | |
| imply SND_SOC_CS530X_SPI | |
| imply SND_SOC_CX20442 | |
| imply SND_SOC_CX2072X | |
| imply SND_SOC_DA7210 | |
| imply SND_SOC_DA7213 | |
| imply SND_SOC_DA7218 | |
| imply SND_SOC_DA7219 | |
| imply SND_SOC_DA732X | |
| imply SND_SOC_DA9055 | |
| imply SND_SOC_DMIC | |
| imply SND_SOC_ES8316 | |
| imply SND_SOC_ES8323 | |
| imply SND_SOC_ES8326 | |
| imply SND_SOC_ES8328_SPI | |
| imply SND_SOC_ES8328_I2C | |
| imply SND_SOC_ES8375 | |
| imply SND_SOC_ES8389 | |
| imply SND_SOC_ES9356 | |
| imply SND_SOC_ES7134 | |
| imply SND_SOC_ES7241 | |
| imply SND_SOC_FRAMER | |
| imply SND_SOC_FS210X | |
| imply SND_SOC_GTM601 | |
| imply SND_SOC_HDAC_HDMI | |
| imply SND_SOC_HDAC_HDA | |
| imply SND_SOC_ICS43432 | |
| imply SND_SOC_IDT821034 | |
| imply SND_SOC_INNO_RK3036 | |
| imply SND_SOC_ISABELLE | |
| imply SND_SOC_JZ4740_CODEC | |
| imply SND_SOC_JZ4725B_CODEC | |
| imply SND_SOC_JZ4760_CODEC | |
| imply SND_SOC_JZ4770_CODEC | |
| imply SND_SOC_LM4857 | |
| imply SND_SOC_LM49453 | |
| imply SND_SOC_LOCHNAGAR_SC | |
| imply SND_SOC_MAX98088 | |
| imply SND_SOC_MAX98090 | |
| imply SND_SOC_MAX98095 | |
| imply SND_SOC_MAX98357A | |
| imply SND_SOC_MAX98371 | |
| imply SND_SOC_MAX98504 | |
| imply SND_SOC_MAX98520 | |
| imply SND_SOC_MAX9867 | |
| imply SND_SOC_MAX98925 | |
| imply SND_SOC_MAX98926 | |
| imply SND_SOC_MAX98927 | |
| imply SND_SOC_MAX98363 | |
| imply SND_SOC_MAX98373_I2C | |
| imply SND_SOC_MAX98373_SDW | |
| imply SND_SOC_MAX98388 | |
| imply SND_SOC_MAX98390 | |
| imply SND_SOC_MAX98396 | |
| imply SND_SOC_MAX9850 | |
| imply SND_SOC_MAX9860 | |
| imply SND_SOC_MAX9759 | |
| imply SND_SOC_MAX9768 | |
| imply SND_SOC_MAX9877 | |
| imply SND_SOC_MC13783 | |
| imply SND_SOC_ML26124 | |
| imply SND_SOC_MT6351 | |
| imply SND_SOC_MT6357 | |
| imply SND_SOC_MT6358 | |
| imply SND_SOC_MT6359 | |
| imply SND_SOC_MT6660 | |
| imply SND_SOC_NAU8315 | |
| imply SND_SOC_NAU8325 | |
| imply SND_SOC_NAU8540 | |
| imply SND_SOC_NAU8810 | |
| imply SND_SOC_NAU8821 | |
| imply SND_SOC_NAU8822 | |
| imply SND_SOC_NAU8824 | |
| imply SND_SOC_NAU8825 | |
| imply SND_SOC_HDMI_CODEC | |
| imply SND_SOC_PCM1681 | |
| imply SND_SOC_PCM1754 | |
| imply SND_SOC_PCM1789_I2C | |
| imply SND_SOC_PCM179X_I2C | |
| imply SND_SOC_PCM179X_SPI | |
| imply SND_SOC_PCM186X_I2C | |
| imply SND_SOC_PCM186X_SPI | |
| imply SND_SOC_PCM3008 | |
| imply SND_SOC_PCM3060_I2C | |
| imply SND_SOC_PCM3060_SPI | |
| imply SND_SOC_PCM3168A_I2C | |
| imply SND_SOC_PCM3168A_SPI | |
| imply SND_SOC_PCM5102A | |
| imply SND_SOC_PCM512x_I2C | |
| imply SND_SOC_PCM512x_SPI | |
| imply SND_SOC_PCM6240 | |
| imply SND_SOC_PEB2466 | |
| imply SND_SOC_PM4125_SDW | |
| imply SND_SOC_RK3308 | |
| imply SND_SOC_RK3328 | |
| imply SND_SOC_RK817 | |
| imply SND_SOC_RT274 | |
| imply SND_SOC_RT286 | |
| imply SND_SOC_RT298 | |
| imply SND_SOC_RT1011 | |
| imply SND_SOC_RT1015 | |
| imply SND_SOC_RT1015P | |
| imply SND_SOC_RT1016 | |
| imply SND_SOC_RT1017_SDCA_SDW | |
| imply SND_SOC_RT1019 | |
| imply SND_SOC_RT1305 | |
| imply SND_SOC_RT1308 | |
| imply SND_SOC_RT5514 | |
| imply SND_SOC_RT5575 | |
| imply SND_SOC_RT5616 | |
| imply SND_SOC_RT5631 | |
| imply SND_SOC_RT5640 | |
| imply SND_SOC_RT5645 | |
| imply SND_SOC_RT5651 | |
| imply SND_SOC_RT5659 | |
| imply SND_SOC_RT5660 | |
| imply SND_SOC_RT5663 | |
| imply SND_SOC_RT5665 | |
| imply SND_SOC_RT5668 | |
| imply SND_SOC_RT5670 | |
| imply SND_SOC_RT5677 | |
| imply SND_SOC_RT5682_I2C | |
| imply SND_SOC_RT5682_SDW | |
| imply SND_SOC_RT5682S | |
| imply SND_SOC_RT700_SDW | |
| imply SND_SOC_RT711_SDW | |
| imply SND_SOC_RT711_SDCA_SDW | |
| imply SND_SOC_RT712_SDCA_SDW | |
| imply SND_SOC_RT712_SDCA_DMIC_SDW | |
| imply SND_SOC_RT715_SDW | |
| imply SND_SOC_RT715_SDCA_SDW | |
| imply SND_SOC_RT721_SDCA_SDW | |
| imply SND_SOC_RT722_SDCA_SDW | |
| imply SND_SOC_RT766_SDCA_SDW | |
| imply SND_SOC_RT1308_SDW | |
| imply SND_SOC_RT1316_SDW | |
| imply SND_SOC_RT1318 | |
| imply SND_SOC_RT1318_SDW | |
| imply SND_SOC_RT1320_SDW | |
| imply SND_SOC_RT9120 | |
| imply SND_SOC_RT9123 | |
| imply SND_SOC_RTQ9124 | |
| imply SND_SOC_RTQ9128 | |
| imply SND_SOC_SDW_MOCKUP | |
| imply SND_SOC_SGTL5000 | |
| imply SND_SOC_SI476X | |
| imply SND_SOC_SIMPLE_AMPLIFIER | |
| imply SND_SOC_SIMPLE_MUX | |
| imply SND_SOC_SMA1303 | |
| imply SND_SOC_SMA1307 | |
| imply SND_SOC_SPDIF | |
| imply SND_SOC_SRC4XXX_I2C | |
| imply SND_SOC_SSM2305 | |
| imply SND_SOC_SSM2518 | |
| imply SND_SOC_SSM2602_SPI | |
| imply SND_SOC_SSM2602_I2C | |
| imply SND_SOC_SSM4567 | |
| imply SND_SOC_STA32X | |
| imply SND_SOC_STA350 | |
| imply SND_SOC_STA529 | |
| imply SND_SOC_STAC9766 | |
| imply SND_SOC_STI_SAS | |
| imply SND_SOC_TAC5XX2_SDW | |
| imply SND_SOC_TAS2552 | |
| imply SND_SOC_TAS2562 | |
| imply SND_SOC_TAS2764 | |
| imply SND_SOC_TAS2770 | |
| imply SND_SOC_TAS2780 | |
| imply SND_SOC_TAS2781_I2C | |
| imply SND_SOC_TAS2783_SDW | |
| imply SND_SOC_TAS5086 | |
| imply SND_SOC_TAS571X | |
| imply SND_SOC_TAS5720 | |
| imply SND_SOC_TAS6424 | |
| imply SND_SOC_TAS675X | |
| imply SND_SOC_TDA7419 | |
| imply SND_SOC_TFA9879 | |
| imply SND_SOC_TFA989X | |
| imply SND_SOC_TLV320ADC3XXX | |
| imply SND_SOC_TLV320ADCX140 | |
| imply SND_SOC_TLV320AIC23_I2C | |
| imply SND_SOC_TLV320AIC23_SPI | |
| imply SND_SOC_TLV320AIC26 | |
| imply SND_SOC_TLV320AIC31XX | |
| imply SND_SOC_TLV320AIC32X4_I2C | |
| imply SND_SOC_TLV320AIC32X4_SPI | |
| imply SND_SOC_TLV320AIC3X_I2C | |
| imply SND_SOC_TLV320AIC3X_SPI | |
| imply SND_SOC_TPA6130A2 | |
| imply SND_SOC_TLV320DAC33 | |
| imply SND_SOC_TSCS42XX | |
| imply SND_SOC_TSCS454 | |
| imply SND_SOC_TS3A227E | |
| imply SND_SOC_TWL4030 | |
| imply SND_SOC_TWL6040 | |
| imply SND_SOC_UDA1334 | |
| imply SND_SOC_UDA1342 | |
| imply SND_SOC_UDA1380 | |
| imply SND_SOC_WCD9335 | |
| imply SND_SOC_WCD934X | |
| imply SND_SOC_WCD937X_SDW | |
| imply SND_SOC_WCD938X_SDW | |
| imply SND_SOC_WCD939X_SDW | |
| imply SND_SOC_LPASS_MACRO_COMMON | |
| imply SND_SOC_LPASS_RX_MACRO | |
| imply SND_SOC_LPASS_TX_MACRO | |
| imply SND_SOC_WM0010 | |
| imply SND_SOC_WM1250_EV1 | |
| imply SND_SOC_WM2000 | |
| imply SND_SOC_WM2200 | |
| imply SND_SOC_WM5100 | |
| imply SND_SOC_WM5102 | |
| imply SND_SOC_WM5110 | |
| imply SND_SOC_WM8350 | |
| imply SND_SOC_WM8400 | |
| imply SND_SOC_WM8510 | |
| imply SND_SOC_WM8523 | |
| imply SND_SOC_WM8524 | |
| imply SND_SOC_WM8580 | |
| imply SND_SOC_WM8711 | |
| imply SND_SOC_WM8727 | |
| imply SND_SOC_WM8728 | |
| imply SND_SOC_WM8731_I2C | |
| imply SND_SOC_WM8731_SPI | |
| imply SND_SOC_WM8737 | |
| imply SND_SOC_WM8741 | |
| imply SND_SOC_WM8750 | |
| imply SND_SOC_WM8753 | |
| imply SND_SOC_WM8770 | |
| imply SND_SOC_WM8776 | |
| imply SND_SOC_WM8782 | |
| imply SND_SOC_WM8804_I2C | |
| imply SND_SOC_WM8804_SPI | |
| imply SND_SOC_WM8900 | |
| imply SND_SOC_WM8903 | |
| imply SND_SOC_WM8904 | |
| imply SND_SOC_WM8940 | |
| imply SND_SOC_WM8955 | |
| imply SND_SOC_WM8960 | |
| imply SND_SOC_WM8961 | |
| imply SND_SOC_WM8962 | |
| imply SND_SOC_WM8971 | |
| imply SND_SOC_WM8974 | |
| imply SND_SOC_WM8978 | |
| imply SND_SOC_WM8983 | |
| imply SND_SOC_WM8985 | |
| imply SND_SOC_WM8988 | |
| imply SND_SOC_WM8990 | |
| imply SND_SOC_WM8991 | |
| imply SND_SOC_WM8993 | |
| imply SND_SOC_WM8994 | |
| imply SND_SOC_WM8995 | |
| imply SND_SOC_WM8996 | |
| imply SND_SOC_WM8997 | |
| imply SND_SOC_WM8998 | |
| imply SND_SOC_WM9081 | |
| imply SND_SOC_WM9090 | |
| imply SND_SOC_WM9705 | |
| imply SND_SOC_WM9712 | |
| imply SND_SOC_WM9713 | |
| imply SND_SOC_WSA881X | |
| imply SND_SOC_WSA883X | |
| imply SND_SOC_WSA884X | |
| imply SND_SOC_WSA885X | |
| imply SND_SOC_ZL38060 | |
| help | |
| Normally ASoC codec drivers are only built if a machine driver which | |
| uses them is also built since they are only usable with a machine | |
| driver. Selecting this option will allow these drivers to be built | |
| without an explicit machine driver for test and development purposes. | |
| Support for the bus types used to access the codecs to be built must | |
| be selected separately. | |
| If unsure select "N". | |
| config SND_SOC_88PM860X | |
| tristate | |
| depends on MFD_88PM860X | |
| config SND_SOC_ARIZONA | |
| tristate | |
| default y if SND_SOC_CS47L24=y | |
| default y if SND_SOC_WM5102=y | |
| default y if SND_SOC_WM5110=y | |
| default y if SND_SOC_WM8997=y | |
| default y if SND_SOC_WM8998=y | |
| default m if SND_SOC_CS47L24=m | |
| default m if SND_SOC_WM5102=m | |
| default m if SND_SOC_WM5110=m | |
| default m if SND_SOC_WM8997=m | |
| default m if SND_SOC_WM8998=m | |
| config SND_SOC_WM_HUBS | |
| tristate | |
| default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y | |
| default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m | |
| config SND_SOC_WM_ADSP | |
| tristate "Cirrus Logic wm_adsp driver" if KUNIT | |
| select FW_CS_DSP | |
| select SND_SOC_COMPRESS | |
| config SND_SOC_WM_ADSP_TEST | |
| tristate "KUnit tests for Cirrus Logic wm_adsp" if !KUNIT_ALL_TESTS | |
| depends on KUNIT | |
| depends on SND_SOC_WM_ADSP | |
| default KUNIT_ALL_TESTS | |
| help | |
| This builds KUnit tests for the Cirrus Logic wm_adsp library. | |
| For more information on KUnit and unit tests in general, | |
| please refer to the KUnit documentation in | |
| Documentation/dev-tools/kunit/. | |
| If in doubt, say "N". | |
| config SND_SOC_AB8500_CODEC | |
| tristate | |
| depends on ABX500_CORE | |
| config SND_SOC_AC97_CODEC | |
| tristate "Build generic ASoC AC97 CODEC driver" | |
| select SND_AC97_CODEC | |
| select SND_SOC_AC97_BUS | |
| config SND_SOC_AD1836 | |
| tristate | |
| depends on SPI_MASTER | |
| config SND_SOC_AD193X | |
| tristate | |
| config SND_SOC_AD193X_SPI | |
| tristate | |
| depends on SPI_MASTER | |
| select SND_SOC_AD193X | |
| config SND_SOC_AD193X_I2C | |
| tristate | |
| depends on I2C | |
| select SND_SOC_AD193X | |
| config SND_SOC_AD1980 | |
| tristate | |
| depends on SND_SOC_AC97_BUS | |
| select REGMAP_AC97 | |
| config SND_SOC_AD73311 | |
| tristate | |
| config SND_SOC_ADAU_UTILS | |
| tristate | |
| config SND_SOC_ADAU1372 | |
| tristate | |
| select SND_SOC_ADAU_UTILS | |
| config SND_SOC_ADAU1372_I2C | |
| tristate "Analog Devices ADAU1372 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_ADAU1372 | |
| select REGMAP_I2C | |
| config SND_SOC_ADAU1372_SPI | |
| tristate "Analog Devices ADAU1372 CODEC (SPI)" | |
| depends on SPI | |
| select SND_SOC_ADAU1372 | |
| select REGMAP_SPI | |
| config SND_SOC_ADAU1373 | |
| tristate "Analog Devices ADAU1373 CODEC" | |
| depends on I2C | |
| select SND_SOC_ADAU_UTILS | |
| config SND_SOC_ADAU1701 | |
| tristate "Analog Devices ADAU1701 CODEC" | |
| depends on I2C | |
| select SND_SOC_SIGMADSP_I2C | |
| config SND_SOC_ADAU17X1 | |
| tristate | |
| select SND_SOC_SIGMADSP_REGMAP | |
| select SND_SOC_ADAU_UTILS | |
| config SND_SOC_ADAU1761 | |
| tristate | |
| select SND_SOC_ADAU17X1 | |
| config SND_SOC_ADAU1761_I2C | |
| tristate "Analog Devices AU1761 CODEC - I2C" | |
| depends on I2C | |
| select SND_SOC_ADAU1761 | |
| select REGMAP_I2C | |
| config SND_SOC_ADAU1761_SPI | |
| tristate "Analog Devices AU1761 CODEC - SPI" | |
| depends on SPI | |
| select SND_SOC_ADAU1761 | |
| select REGMAP_SPI | |
| config SND_SOC_ADAU1781 | |
| select SND_SOC_ADAU17X1 | |
| tristate | |
| config SND_SOC_ADAU1781_I2C | |
| tristate | |
| depends on I2C | |
| select SND_SOC_ADAU1781 | |
| select REGMAP_I2C | |
| config SND_SOC_ADAU1781_SPI | |
| tristate | |
| depends on SPI_MASTER | |
| select SND_SOC_ADAU1781 | |
| select REGMAP_SPI | |
| config SND_SOC_ADAU1977 | |
| tristate | |
| config SND_SOC_ADAU1977_SPI | |
| tristate "Analog Devices ADAU1977/ADAU1978/ADAU1979 CODEC - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_ADAU1977 | |
| select REGMAP_SPI | |
| config SND_SOC_ADAU1977_I2C | |
| tristate "Analog Devices ADAU1977/ADAU1978/ADAU1979 CODEC - I2C" | |
| depends on I2C | |
| select SND_SOC_ADAU1977 | |
| select REGMAP_I2C | |
| config SND_SOC_ADAU7002 | |
| tristate "Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter" | |
| config SND_SOC_ADAU7118 | |
| tristate | |
| config SND_SOC_ADAU7118_HW | |
| tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - HW Mode" | |
| select SND_SOC_ADAU7118 | |
| help | |
| Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM | |
| Converter. In this mode, the device works in standalone mode which | |
| means that there is no bus to communicate with it. Stereo mode is not | |
| supported in this mode. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-adau7118-hw. | |
| config SND_SOC_ADAU7118_I2C | |
| tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - I2C" | |
| depends on I2C | |
| select SND_SOC_ADAU7118 | |
| select REGMAP_I2C | |
| help | |
| Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM | |
| Converter over I2C. This gives full support over the device. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-adau7118-i2c. | |
| config SND_SOC_ADAV80X | |
| tristate | |
| config SND_SOC_ADAV801 | |
| tristate | |
| depends on SPI_MASTER | |
| select SND_SOC_ADAV80X | |
| config SND_SOC_ADAV803 | |
| tristate | |
| depends on I2C | |
| select SND_SOC_ADAV80X | |
| config SND_SOC_ADS117X | |
| tristate | |
| config SND_SOC_AK4104 | |
| tristate "AKM AK4104 CODEC" | |
| depends on SPI_MASTER | |
| config SND_SOC_AK4118 | |
| tristate "AKM AK4118 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_AK4375 | |
| tristate "AKM AK4375 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Enable support for the Asahi-Kasei AK4375 codec. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-ak4375. | |
| config SND_SOC_AK4458 | |
| tristate "AKM AK4458 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_AK4535 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_AK4554 | |
| tristate "AKM AK4554 CODEC" | |
| config SND_SOC_AK4613 | |
| tristate "AKM AK4613 CODEC" | |
| depends on I2C | |
| config SND_SOC_AK4619 | |
| tristate "AKM AK4619 CODEC" | |
| depends on I2C | |
| config SND_SOC_AK4642 | |
| tristate "AKM AK4642 CODEC" | |
| depends on I2C | |
| config SND_SOC_AK4671 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_AK5386 | |
| tristate "AKM AK5638 CODEC" | |
| config SND_SOC_AK5558 | |
| tristate "AKM AK5558 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_ALC5623 | |
| tristate "Realtek ALC5623 CODEC" | |
| depends on I2C | |
| config SND_SOC_ALC5632 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_AUDIO_IIO_AUX | |
| tristate "Audio IIO Auxiliary device" | |
| depends on IIO | |
| help | |
| Enable support for Industrial I/O devices as audio auxiliary devices. | |
| This allows to have an IIO device present in the audio path and | |
| controlled using mixer controls. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-audio-iio-aux. | |
| config SND_SOC_AW8738 | |
| tristate "Awinic AW8738 Audio Amplifier" | |
| select GPIOLIB | |
| help | |
| Enable support for the Awinic AW8738 audio amplifier (or similar). | |
| The driver supports simple audio amplifiers similar to | |
| SND_SOC_SIMPLE_AMPLIFIER, but additionally allows setting the | |
| operation mode using the Awinic-specific one-wire pulse control. | |
| config SND_SOC_AW88395_LIB | |
| select CRC8 | |
| tristate | |
| config SND_SOC_AW88395 | |
| tristate "Soc Audio for awinic aw88395" | |
| depends on I2C | |
| select CRC32 | |
| select REGMAP_I2C | |
| select GPIOLIB | |
| select SND_SOC_AW88395_LIB | |
| help | |
| this option enables support for aw88395 Smart PA. | |
| The Awinic AW88395 is an I2S/TDM input, high efficiency | |
| digital Smart K audio amplifier with an integrated 10V | |
| smart boost convert. | |
| config SND_SOC_AW88166 | |
| tristate "Soc Audio for awinic aw88166" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select GPIOLIB | |
| select SND_SOC_AW88395_LIB | |
| help | |
| This option enables support for aw88166 Smart PA. | |
| The awinic AW88166 is an I2S/TDM input, high efficiency | |
| digital Smart K audio amplifier with sound quality | |
| enhancement algorithms and speaker protection. | |
| config SND_SOC_AW88261 | |
| tristate "Soc Audio for awinic aw88261" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select GPIOLIB | |
| select SND_SOC_AW88395_LIB | |
| help | |
| This option enables support for aw88261 Smart PA. | |
| The awinic AW88261 is an I2S/TDM input, high efficiency | |
| digital Smart K audio amplifier. The output voltage of | |
| boost converter can be adjusted smartly according to | |
| the input amplitude. | |
| config SND_SOC_AW88081 | |
| tristate "Soc Audio for awinic aw88081/aw88083" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select SND_SOC_AW88395_LIB | |
| help | |
| This option enables support for aw88081 Smart PA. | |
| The awinic AW88081 is an I2S/TDM input, high efficiency | |
| digital Smart K audio amplifier. Due to its 9uV noise | |
| floor and ultra-low distortion, clean listening is guaranteed. | |
| config SND_SOC_AW87390 | |
| tristate "Soc Audio for awinic aw87390" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select SND_SOC_AW88395_LIB | |
| help | |
| The awinic aw87390 is specifically designed to improve | |
| the musical output dynamic range, enhance the overall | |
| sound quality, which is a new high efficiency, low | |
| noise, constant large volume, 6th Smart K audio amplifier. | |
| config SND_SOC_AW88399_LIB | |
| tristate | |
| select SND_SOC_AW88395_LIB | |
| config SND_SOC_AW88399 | |
| tristate "Soc Audio for awinic aw88399" | |
| depends on I2C | |
| select CRC8 | |
| select REGMAP_I2C | |
| select GPIOLIB | |
| select SND_SOC_AW88395_LIB | |
| select SND_SOC_AW88399_LIB | |
| help | |
| This option enables support for aw88399 Smart PA. | |
| The awinic AW88399 is an I2S/TDM input, high efficiency | |
| digital Smart K audio amplifier and SKTune speaker | |
| protection algorithms. | |
| config SND_SOC_BD28623 | |
| tristate "ROHM BD28623 CODEC" | |
| help | |
| Enable support for ROHM BD28623MUV Class D speaker amplifier. | |
| This codec does not have any control buses such as I2C, it | |
| detect format of I2S automatically. | |
| config SND_SOC_BT_SCO | |
| tristate "Dummy BT SCO codec driver" | |
| config SND_SOC_CHV3_CODEC | |
| tristate "Google Chameleon v3 codec driver" | |
| help | |
| Enable support for the Google Chameleon v3 audio codec. | |
| This codec does not have a control interface, it always outputs | |
| 8 channel S32_LE audio. | |
| config SND_SOC_CPCAP | |
| tristate "Motorola CPCAP codec" | |
| depends on MFD_CPCAP || COMPILE_TEST | |
| config SND_SOC_CQ0093VC | |
| tristate | |
| config SND_SOC_CROS_EC_CODEC | |
| tristate "codec driver for ChromeOS EC" | |
| depends on CROS_EC | |
| select CRYPTO_LIB_SHA256 | |
| help | |
| If you say yes here you will get support for the | |
| ChromeOS Embedded Controller's Audio Codec. | |
| config SND_SOC_CS_AMP_LIB | |
| tristate | |
| config SND_SOC_CS_AMP_LIB_TEST_HOOKS | |
| bool | |
| depends on SND_SOC_CS_AMP_LIB | |
| config SND_SOC_CS_AMP_LIB_TEST | |
| tristate "KUnit test for Cirrus Logic cs-amp-lib" if !KUNIT_ALL_TESTS | |
| depends on SND_SOC_CS_AMP_LIB && KUNIT | |
| select SND_SOC_CS_AMP_LIB_TEST_HOOKS | |
| default KUNIT_ALL_TESTS | |
| help | |
| This builds KUnit tests for the Cirrus Logic common | |
| amplifier library. | |
| For more information on KUnit and unit tests in general, | |
| please refer to the KUnit documentation in | |
| Documentation/dev-tools/kunit/. | |
| If in doubt, say "N". | |
| config SND_SOC_CS35L32 | |
| tristate "Cirrus Logic CS35L32 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS35L33 | |
| tristate "Cirrus Logic CS35L33 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS35L34 | |
| tristate "Cirrus Logic CS35L34 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS35L35 | |
| tristate "Cirrus Logic CS35L35 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS35L36 | |
| tristate "Cirrus Logic CS35L36 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS35L41_LIB | |
| tristate | |
| config SND_SOC_CS35L41 | |
| tristate | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_CS35L41_SPI | |
| tristate "Cirrus Logic CS35L41 CODEC (SPI)" | |
| depends on SPI_MASTER | |
| select SND_SOC_CS35L41_LIB | |
| select SND_SOC_CS35L41 | |
| select REGMAP_SPI | |
| config SND_SOC_CS35L41_I2C | |
| tristate "Cirrus Logic CS35L41 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_CS35L41_LIB | |
| select SND_SOC_CS35L41 | |
| select REGMAP_I2C | |
| config SND_SOC_CS35L45 | |
| tristate | |
| select REGMAP_IRQ | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_CS35L45_SPI | |
| tristate "Cirrus Logic CS35L45 CODEC (SPI)" | |
| depends on SPI_MASTER | |
| select REGMAP | |
| select REGMAP_SPI | |
| select SND_SOC_CS35L45 | |
| help | |
| Enable support for Cirrus Logic CS35L45 smart speaker amplifier | |
| with SPI control. | |
| config SND_SOC_CS35L45_I2C | |
| tristate "Cirrus Logic CS35L45 CODEC (I2C)" | |
| depends on I2C | |
| select REGMAP | |
| select REGMAP_I2C | |
| select SND_SOC_CS35L45 | |
| help | |
| Enable support for Cirrus Logic CS35L45 smart speaker amplifier | |
| with I2C control. | |
| config SND_SOC_CS35L56 | |
| tristate | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_CS35L56_SHARED | |
| select SND_SOC_CS_AMP_LIB | |
| tristate | |
| config SND_SOC_CS35L56_I2C | |
| tristate "Cirrus Logic CS35L56 CODEC (I2C)" | |
| depends on I2C | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| select REGMAP_I2C | |
| select SND_SOC_CS35L56 | |
| select SND_SOC_CS35L56_SHARED | |
| help | |
| Enable support for Cirrus Logic CS35L56 boosted amplifier with I2C control | |
| config SND_SOC_CS35L56_SPI | |
| tristate "Cirrus Logic CS35L56 CODEC (SPI)" | |
| depends on SPI_MASTER | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| select REGMAP_SPI | |
| select SND_SOC_CS35L56 | |
| select SND_SOC_CS35L56_SHARED | |
| help | |
| Enable support for Cirrus Logic CS35L56 boosted amplifier with SPI control | |
| config SND_SOC_CS35L56_SDW | |
| tristate "Cirrus Logic CS35L56 CODEC (SDW)" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select IRQ_DOMAIN | |
| select SND_SOC_CS35L56 | |
| select SND_SOC_CS35L56_SHARED | |
| help | |
| Enable support for Cirrus Logic CS35L56 boosted amplifier with SoundWire control | |
| config SND_SOC_CS35L56_CAL_DEBUGFS_COMMON | |
| bool | |
| menu "CS35L56 driver options" | |
| depends on SND_SOC_CS35L56 | |
| config SND_SOC_CS35L56_CAL_DEBUGFS | |
| bool "CS35L56 create debugfs for factory calibration" | |
| depends on DEBUG_FS | |
| select SND_SOC_CS35L56_CAL_DEBUGFS_COMMON | |
| help | |
| Create debugfs entries used during factory-line manufacture | |
| for factory calibration. | |
| If unsure select "N". | |
| config SND_SOC_CS35L56_CAL_SET_CTRL | |
| bool "CS35L56 ALSA control to restore factory calibration" | |
| select SND_SOC_CS35L56_CAL_DEBUGFS_COMMON | |
| help | |
| Allow restoring factory calibration data through an ALSA | |
| control. This is only needed on platforms without UEFI or | |
| some other method of non-volatile storage that the driver | |
| can access directly. | |
| On most platforms this is not needed. | |
| If unsure select "N". | |
| config SND_SOC_CS35L56_CAL_PERFORM_CTRL | |
| bool "CS35L56 ALSA control to perform factory calibration" | |
| select SND_SOC_CS35L56_CAL_DEBUGFS_COMMON | |
| help | |
| Allow performing factory calibration data through an ALSA | |
| control. It is recommended to use the debugfs method instead | |
| because debugfs has restricted access permissions. | |
| On most platforms this is not needed. | |
| If unsure select "N". | |
| config SND_SOC_CS35L56_TEST | |
| tristate "KUnit test for Cirrus Logic cs35l56 driver" if !KUNIT_ALL_TESTS | |
| depends on SND_SOC_CS35L56 && KUNIT | |
| default KUNIT_ALL_TESTS | |
| select SND_SOC_CS_AMP_LIB_TEST_HOOKS | |
| help | |
| This builds KUnit tests for the Cirrus Logic cs35l56 | |
| codec driver. | |
| For more information on KUnit and unit tests in general, | |
| please refer to the KUnit documentation in | |
| Documentation/dev-tools/kunit/. | |
| If in doubt, say "N". | |
| config SND_SOC_CS35L56_SHARED_TEST | |
| tristate "KUnit test for Cirrus Logic cs35l56-shared" if !KUNIT_ALL_TESTS | |
| depends on SND_SOC_CS35L56_SHARED && KUNIT | |
| default KUNIT_ALL_TESTS | |
| help | |
| This builds KUnit tests for the Cirrus Logic cs35l56-shared | |
| module. | |
| For more information on KUnit and unit tests in general, | |
| please refer to the KUnit documentation in | |
| Documentation/dev-tools/kunit/. | |
| If in doubt, say "N". | |
| endmenu | |
| config SND_SOC_CS40L50 | |
| tristate "Cirrus Logic CS40L50 CODEC" | |
| depends on MFD_CS40L50_CORE | |
| help | |
| This option enables support for I2S streaming to Cirrus Logic CS40L50. | |
| CS40L50 is a haptic driver with waveform memory, an integrated | |
| DSP, and closed-loop algorithms. If built as a module, it will be | |
| called snd-soc-cs40l50. | |
| config SND_SOC_CS42L42_CORE | |
| tristate | |
| config SND_SOC_CS42L42 | |
| tristate "Cirrus Logic CS42L42 CODEC (I2C)" | |
| depends on I2C | |
| select REGMAP | |
| select REGMAP_I2C | |
| select SND_SOC_CS42L42_CORE | |
| config SND_SOC_CS42L42_SDW | |
| tristate "Cirrus Logic CS42L42 CODEC on Soundwire" | |
| depends on SOUNDWIRE | |
| select SND_SOC_CS42L42_CORE | |
| help | |
| Enable support for Cirrus Logic CS42L42 codec with Soundwire control | |
| config SND_SOC_CS42L43 | |
| tristate "Cirrus Logic CS42L43 CODEC" | |
| depends on MFD_CS42L43 | |
| help | |
| Select this to support the audio functions of the Cirrus Logic | |
| CS42L43 PC CODEC. | |
| config SND_SOC_CS42L43_SDW | |
| tristate "Cirrus Logic CS42L43 CODEC (SoundWire)" | |
| depends on SND_SOC_CS42L43 && MFD_CS42L43_SDW | |
| help | |
| Select this to support the audio functions of the Cirrus Logic | |
| CS42L43 PC CODEC over SoundWire. | |
| config SND_SOC_CS42L51 | |
| tristate | |
| config SND_SOC_CS42L51_I2C | |
| tristate "Cirrus Logic CS42L51 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_CS42L51 | |
| config SND_SOC_CS42L52 | |
| tristate "Cirrus Logic CS42L52 CODEC" | |
| depends on I2C && INPUT | |
| config SND_SOC_CS42L56 | |
| tristate "Cirrus Logic CS42L56 CODEC" | |
| depends on I2C && INPUT | |
| config SND_SOC_CS42L73 | |
| tristate "Cirrus Logic CS42L73 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS42L83 | |
| tristate "Cirrus Logic CS42L83 CODEC" | |
| depends on I2C | |
| select REGMAP | |
| select REGMAP_I2C | |
| select SND_SOC_CS42L42_CORE | |
| config SND_SOC_CS42L84 | |
| tristate "Cirrus Logic CS42L84 CODEC" | |
| depends on I2C | |
| select REGMAP | |
| select REGMAP_I2C | |
| config SND_SOC_CS4234 | |
| tristate "Cirrus Logic CS4234 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_CS4265 | |
| tristate "Cirrus Logic CS4265 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| # Cirrus Logic CS4270 Codec | |
| config SND_SOC_CS4270 | |
| tristate "Cirrus Logic CS4270 CODEC" | |
| depends on I2C | |
| # Cirrus Logic CS4270 Codec VD = 3.3V Errata | |
| # Select if you are affected by the errata where the part will not function | |
| # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will | |
| # not select any sample rates that require MCLK to be divided by 1.5. | |
| config SND_SOC_CS4270_VD33_ERRATA | |
| bool | |
| depends on SND_SOC_CS4270 | |
| config SND_SOC_CS4271 | |
| tristate | |
| config SND_SOC_CS4271_I2C | |
| tristate "Cirrus Logic CS4271 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_CS4271 | |
| select REGMAP_I2C | |
| config SND_SOC_CS4271_SPI | |
| tristate "Cirrus Logic CS4271 CODEC (SPI)" | |
| depends on SPI_MASTER | |
| select SND_SOC_CS4271 | |
| select REGMAP_SPI | |
| config SND_SOC_CS42XX8 | |
| tristate | |
| config SND_SOC_CS42XX8_SPI | |
| tristate "Cirrus Logic CS42448/CS42888 CODEC (SPI)" | |
| depends on SPI_MASTER | |
| select SND_SOC_CS42XX8 | |
| select REGMAP_SPI | |
| config SND_SOC_CS42XX8_I2C | |
| tristate "Cirrus Logic CS42448/CS42888 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_CS42XX8 | |
| select REGMAP_I2C | |
| # Cirrus Logic CS43130 HiFi DAC | |
| config SND_SOC_CS43130 | |
| tristate "Cirrus Logic CS43130 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS4341 | |
| tristate "Cirrus Logic CS4341 CODEC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| select REGMAP_I2C if I2C | |
| select REGMAP_SPI if SPI_MASTER | |
| # Cirrus Logic CS4349 HiFi DAC | |
| config SND_SOC_CS4349 | |
| tristate "Cirrus Logic CS4349 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS47L15 | |
| tristate | |
| depends on MFD_CS47L15 | |
| config SND_SOC_CS47L24 | |
| tristate | |
| depends on MFD_CS47L24 && MFD_ARIZONA | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_CS47L35 | |
| tristate | |
| depends on MFD_CS47L35 | |
| config SND_SOC_CS47L85 | |
| tristate | |
| depends on MFD_CS47L85 | |
| config SND_SOC_CS47L90 | |
| tristate | |
| depends on MFD_CS47L90 | |
| config SND_SOC_CS47L92 | |
| tristate | |
| depends on MFD_CS47L92 | |
| config SND_SOC_CS48L32 | |
| tristate "Cirrus Logic CS48L32 audio DSP" | |
| depends on SPI_MASTER | |
| select REGMAP_SPI | |
| select SND_SOC_WM_ADSP | |
| help | |
| Build the codec driver for the Cirrus Logic CS48L32 audio DSP. | |
| # Cirrus Logic Quad-Channel ADC | |
| config SND_SOC_CS53L30 | |
| tristate "Cirrus Logic CS53L30 CODEC" | |
| depends on I2C | |
| config SND_SOC_CS530X | |
| tristate | |
| config SND_SOC_CS530X_I2C | |
| tristate "Cirrus Logic CS530x ADCs (I2C)" | |
| depends on I2C | |
| select REGMAP | |
| select REGMAP_I2C | |
| select SND_SOC_CS530X | |
| help | |
| Enable support for Cirrus Logic CS530X ADCs | |
| with I2C control. | |
| config SND_SOC_CS530X_SPI | |
| tristate "Cirrus Logic CS530x ADCs (SPI)" | |
| depends on SPI_MASTER | |
| select REGMAP_SPI | |
| select SND_SOC_CS530X | |
| help | |
| Enable support for Cirrus Logic CS530X ADCs | |
| with SPI control. | |
| config SND_SOC_CX20442 | |
| tristate | |
| depends on TTY | |
| config SND_SOC_CX2072X | |
| tristate "Conexant CX2072X CODEC" | |
| depends on I2C | |
| help | |
| Enable support for Conexant CX20721 and CX20723 codec chips. | |
| config SND_SOC_JZ4740_CODEC | |
| depends on MACH_INGENIC || COMPILE_TEST | |
| depends on OF | |
| select REGMAP_MMIO | |
| tristate "Ingenic JZ4740 internal CODEC" | |
| help | |
| Enable support for the internal CODEC found in the JZ4740 SoC | |
| from Ingenic. | |
| This driver can also be built as a module. If so, the module | |
| will be called snd-soc-jz4740-codec. | |
| config SND_SOC_JZ4725B_CODEC | |
| depends on MACH_INGENIC || COMPILE_TEST | |
| depends on OF | |
| select REGMAP | |
| tristate "Ingenic JZ4725B internal CODEC" | |
| help | |
| Enable support for the internal CODEC found in the JZ4725B SoC | |
| from Ingenic. | |
| This driver can also be built as a module. If so, the module | |
| will be called snd-soc-jz4725b-codec. | |
| config SND_SOC_JZ4760_CODEC | |
| depends on MACH_INGENIC || COMPILE_TEST | |
| depends on OF | |
| select REGMAP | |
| tristate "Ingenic JZ4760 internal CODEC" | |
| help | |
| Enable support for the internal CODEC found in the JZ4760 SoC | |
| from Ingenic. | |
| This driver can also be built as a module. If so, the module | |
| will be called snd-soc-jz4760-codec. | |
| config SND_SOC_JZ4770_CODEC | |
| depends on MACH_INGENIC || COMPILE_TEST | |
| depends on OF | |
| select REGMAP | |
| tristate "Ingenic JZ4770 internal CODEC" | |
| help | |
| Enable support for the internal CODEC found in the JZ4770 SoC | |
| from Ingenic. | |
| This driver can also be built as a module. If so, the module | |
| will be called snd-soc-jz4770-codec. | |
| config SND_SOC_DA7210 | |
| tristate | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_DA7213 | |
| tristate "Dialog DA7213 CODEC" | |
| depends on I2C | |
| config SND_SOC_DA7218 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_DA7219 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_DA732X | |
| tristate | |
| depends on I2C | |
| config SND_SOC_DA9055 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_DMIC | |
| tristate "Generic Digital Microphone CODEC" | |
| help | |
| Enable support for the Generic Digital Microphone CODEC. | |
| Select this if your sound card has DMICs. | |
| config SND_SOC_HDMI_CODEC | |
| tristate | |
| select SND_PCM_ELD | |
| select SND_PCM_IEC958 | |
| select HDMI | |
| config SND_SOC_ES7134 | |
| tristate "Everest Semi ES7134 CODEC" | |
| config SND_SOC_ES7241 | |
| tristate "Everest Semi ES7241 CODEC" | |
| config SND_SOC_ES83XX_DSM_COMMON | |
| depends on ACPI | |
| tristate | |
| config SND_SOC_ES8311 | |
| tristate "Everest Semi ES8311 CODEC" | |
| depends on I2C | |
| config SND_SOC_ES8316 | |
| tristate "Everest Semi ES8316 CODEC" | |
| depends on I2C | |
| config SND_SOC_ES8323 | |
| tristate "Everest Semi ES8323 CODEC" | |
| depends on I2C | |
| config SND_SOC_ES8326 | |
| tristate "Everest Semi ES8326 CODEC" | |
| depends on I2C | |
| config SND_SOC_ES8328 | |
| tristate | |
| config SND_SOC_ES8328_I2C | |
| tristate "Everest Semi ES8328 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_ES8328 | |
| config SND_SOC_ES8328_SPI | |
| tristate "Everest Semi ES8328 CODEC (SPI)" | |
| depends on SPI_MASTER | |
| select SND_SOC_ES8328 | |
| config SND_SOC_ES8375 | |
| tristate "Everest Semi ES8375 CODEC" | |
| depends on I2C | |
| config SND_SOC_ES8389 | |
| tristate "Everest Semi ES8389 CODEC" | |
| depends on I2C | |
| config SND_SOC_ES9356 | |
| tristate "Everest Semi ES9356 CODEC SDW" | |
| depends on SND_SOC_SDCA | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_FRAMER | |
| tristate "Framer codec" | |
| depends on GENERIC_FRAMER | |
| help | |
| Enable support for the framer codec. | |
| The framer codec uses the generic framer infrastructure to transport | |
| some audio data over an analog E1/T1/J1 line. | |
| This codec allows to use some of the time slots available on the TDM | |
| bus on which the framer is connected to transport the audio data. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-framer. | |
| config SND_SOC_FS_AMP_LIB | |
| select CRC16 | |
| tristate | |
| config SND_SOC_FS210X | |
| tristate 'FourSemi FS2104/5S digital audio amplifier' | |
| depends on I2C | |
| select GPIOLIB | |
| select REGMAP_I2C | |
| select SND_SOC_FS_AMP_LIB | |
| help | |
| Enable support for FourSemi FS2104/5S digital audio amplifier. | |
| The FS2104/5S are Inductor-Less, Stereo, Closed-Loop, | |
| Digital Input Class-D Power Amplifiers with Enhanced Signal Processing. | |
| The amplifiers support I2C and I2S/TDM. | |
| config SND_SOC_GTM601 | |
| tristate 'GTM601 UMTS modem audio codec' | |
| config SND_SOC_HDAC_HDMI | |
| tristate | |
| select SND_HDA_EXT_CORE | |
| select SND_PCM_ELD | |
| select HDMI | |
| config SND_SOC_HDAC_HDA | |
| tristate | |
| select SND_HDA | |
| config SND_SOC_HDA | |
| tristate "HD-Audio codec driver" | |
| select SND_HDA_EXT_CORE | |
| select SND_HDA | |
| help | |
| This enables HD-Audio codec support in ASoC subsystem. Compared | |
| to SND_SOC_HDAC_HDA, driver's behavior is identical to HD-Audio | |
| legacy solution - including the dynamic resource allocation | |
| based on actual codec capabilities. | |
| config SND_SOC_ICS43432 | |
| tristate "ICS43423 and compatible i2s microphones" | |
| config SND_SOC_IDT821034 | |
| tristate "Renesas IDT821034 quad PCM codec" | |
| depends on SPI | |
| help | |
| Enable support for the Renesas IDT821034 quad PCM with | |
| programmable gain codec. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-idt821034. | |
| config SND_SOC_INNO_RK3036 | |
| tristate "Inno codec driver for RK3036 SoC" | |
| depends on ARCH_ROCKCHIP || COMPILE_TEST | |
| select REGMAP_MMIO | |
| config SND_SOC_ISABELLE | |
| tristate | |
| depends on I2C | |
| config SND_SOC_LM49453 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_LOCHNAGAR_SC | |
| tristate "Lochnagar Sound Card" | |
| depends on MFD_LOCHNAGAR || COMPILE_TEST | |
| help | |
| This driver support the sound card functionality of the Cirrus | |
| Logic Lochnagar audio development board. | |
| config SND_SOC_MADERA | |
| tristate | |
| select SND_SOC_WM_ADSP | |
| default y if SND_SOC_CS47L15=y | |
| default y if SND_SOC_CS47L35=y | |
| default y if SND_SOC_CS47L85=y | |
| default y if SND_SOC_CS47L90=y | |
| default y if SND_SOC_CS47L92=y | |
| default m if SND_SOC_CS47L15=m | |
| default m if SND_SOC_CS47L35=m | |
| default m if SND_SOC_CS47L85=m | |
| default m if SND_SOC_CS47L90=m | |
| default m if SND_SOC_CS47L92=m | |
| config SND_SOC_MAX98088 | |
| tristate "Maxim MAX98088/9 Low-Power, Stereo Audio Codec" | |
| depends on I2C | |
| config SND_SOC_MAX98090 | |
| tristate "Maxim MAX98090 CODEC" | |
| depends on I2C | |
| config SND_SOC_MAX98095 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX98357A | |
| tristate "Maxim MAX98357A CODEC" | |
| config SND_SOC_MAX98371 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX98504 | |
| tristate "Maxim MAX98504 speaker amplifier" | |
| depends on I2C | |
| config SND_SOC_MAX9867 | |
| tristate "Maxim MAX9867 CODEC" | |
| depends on I2C | |
| config SND_SOC_MAX98925 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX98926 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX98927 | |
| tristate "Maxim Integrated MAX98927 Speaker Amplifier" | |
| depends on I2C | |
| config SND_SOC_MAX98520 | |
| tristate "Maxim Integrated MAX98520 Speaker Amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Maxim Integrated MAX98520 audio | |
| amplifier, which implements a tripler charge pump | |
| based boost converter and supports sample rates of | |
| 8KHz to 192KHz. | |
| To compile this driver as a module, choose M here. | |
| config SND_SOC_MAX98363 | |
| tristate "Analog Devices MAX98363 Soundwire Speaker Amplifier" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| Enable support for Analog Devices MAX98363 Soundwire | |
| amplifier. MAX98363 supports the MIPI SoundWire v1.2 | |
| compatible interface for audio and control data. | |
| This amplifier does not support I2C and I2S. | |
| config SND_SOC_MAX98373 | |
| tristate | |
| config SND_SOC_MAX98373_I2C | |
| tristate "Maxim Integrated MAX98373 Speaker Amplifier" | |
| depends on I2C | |
| select SND_SOC_MAX98373 | |
| config SND_SOC_MAX98373_SDW | |
| tristate "Maxim Integrated MAX98373 Speaker Amplifier - SDW" | |
| depends on SOUNDWIRE | |
| select SND_SOC_MAX98373 | |
| select REGMAP_SOUNDWIRE | |
| help | |
| Enable support for Maxim Integrated MAX98373 Soundwire | |
| amplifier. MAX98373 supports either the MIPI SoundWire | |
| compatible interface for audio and control data, or | |
| the PCM interface for audio data and a standard I2C | |
| interface for control data. Select this if MAX98373 is | |
| connected via soundwire. | |
| config SND_SOC_MAX98388 | |
| tristate "Analog Devices MAX98388 Speaker Amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Analog Devices MAX98388 audio | |
| amplifier. The device provides a PCM interface for | |
| audio data and a standard I2C interface for control | |
| data communication. | |
| config SND_SOC_MAX98390 | |
| tristate "Maxim Integrated MAX98390 Speaker Amplifier" | |
| depends on I2C | |
| config SND_SOC_MAX98396 | |
| tristate "Analog Devices MAX98396 Speaker Amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Analog Devices MAX98396 audio | |
| amplifier. The device provides a PCM interface for | |
| audio data and a standard I2C interface for control | |
| data communication. | |
| config SND_SOC_MAX9850 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX9860 | |
| tristate "Maxim MAX9860 Mono Audio Voice Codec" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_MSM8916_WCD_ANALOG | |
| tristate "Qualcomm MSM8916 WCD Analog Codec" | |
| depends on SPMI || COMPILE_TEST | |
| config SND_SOC_MSM8916_WCD_DIGITAL | |
| tristate "Qualcomm MSM8916 WCD DIGITAL Codec" | |
| select REGMAP_MMIO | |
| config SND_SOC_PCM1681 | |
| tristate "Texas Instruments PCM1681 CODEC" | |
| depends on I2C | |
| config SND_SOC_PCM1754 | |
| tristate "Texas Instruments PCM1754 CODEC" | |
| depends on GPIOLIB | |
| config SND_SOC_PCM1789 | |
| tristate | |
| config SND_SOC_PCM1789_I2C | |
| tristate "Texas Instruments PCM1789 CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_PCM1789 | |
| help | |
| Enable support for Texas Instruments PCM1789 CODEC. | |
| Select this if your PCM1789 is connected via an I2C bus. | |
| config SND_SOC_PCM179X | |
| tristate | |
| config SND_SOC_PCM179X_I2C | |
| tristate "Texas Instruments PCM179X CODEC (I2C)" | |
| depends on I2C | |
| select SND_SOC_PCM179X | |
| help | |
| Enable support for Texas Instruments PCM179x CODEC. | |
| Select this if your PCM179x is connected via an I2C bus. | |
| config SND_SOC_PCM179X_SPI | |
| tristate "Texas Instruments PCM179X CODEC (SPI)" | |
| depends on SPI_MASTER | |
| select SND_SOC_PCM179X | |
| help | |
| Enable support for Texas Instruments PCM179x CODEC. | |
| Select this if your PCM179x is connected via an SPI bus. | |
| config SND_SOC_PCM186X | |
| tristate | |
| config SND_SOC_PCM186X_I2C | |
| tristate "Texas Instruments PCM186x CODECs - I2C" | |
| depends on I2C | |
| select SND_SOC_PCM186X | |
| select REGMAP_I2C | |
| config SND_SOC_PCM186X_SPI | |
| tristate "Texas Instruments PCM186x CODECs - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_PCM186X | |
| select REGMAP_SPI | |
| config SND_SOC_PCM3008 | |
| tristate | |
| config SND_SOC_PCM3060 | |
| tristate | |
| config SND_SOC_PCM3060_I2C | |
| tristate "Texas Instruments PCM3060 CODEC - I2C" | |
| depends on I2C | |
| select SND_SOC_PCM3060 | |
| select REGMAP_I2C | |
| config SND_SOC_PCM3060_SPI | |
| tristate "Texas Instruments PCM3060 CODEC - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_PCM3060 | |
| select REGMAP_SPI | |
| config SND_SOC_PCM3168A | |
| tristate | |
| config SND_SOC_PCM3168A_I2C | |
| tristate "Texas Instruments PCM3168A CODEC - I2C" | |
| depends on I2C | |
| select SND_SOC_PCM3168A | |
| select REGMAP_I2C | |
| config SND_SOC_PCM3168A_SPI | |
| tristate "Texas Instruments PCM3168A CODEC - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_PCM3168A | |
| select REGMAP_SPI | |
| config SND_SOC_PCM5102A | |
| tristate "Texas Instruments PCM5102A CODEC" | |
| config SND_SOC_PCM512x | |
| tristate | |
| config SND_SOC_PCM512x_I2C | |
| tristate "Texas Instruments PCM512x CODECs - I2C" | |
| depends on I2C | |
| select SND_SOC_PCM512x | |
| select REGMAP_I2C | |
| config SND_SOC_PCM512x_SPI | |
| tristate "Texas Instruments PCM512x CODECs - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_PCM512x | |
| select REGMAP_SPI | |
| config SND_SOC_PCM6240 | |
| tristate "Texas Instruments PCM6240 Family Audio chips based on I2C" | |
| depends on I2C | |
| help | |
| Enable support for Texas Instruments PCM6240 Family Audio chips. | |
| Note the PCM6240 driver implements a flexible and configurable | |
| setting for register and filter coefficients, to one, two or | |
| even multiple PCM6240 Family Audio chips. | |
| config SND_SOC_PEB2466 | |
| tristate "Infineon PEB2466 quad PCM codec" | |
| depends on SPI | |
| select REGMAP_SPI | |
| help | |
| Enable support for the Infineon PEB2466 quad PCM codec, | |
| also named SICOFI 4-uC. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-peb2466. | |
| config SND_SOC_PM4125 | |
| depends on SND_SOC_PM4125_SDW | |
| select SND_SOC_WCD_COMMON | |
| tristate | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| config SND_SOC_PM4125_SDW | |
| tristate "PM4125 audio codec - SDW" | |
| select SND_SOC_PM4125 | |
| select SND_SOC_WCD_MBHC | |
| select REGMAP_IRQ | |
| select SND_SOC_WCD_COMMON | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| The PMIC PM4125 has an in-built audio codec IC used with SoCs | |
| like QCM2290, and it is connected via soundwire and SPMI. | |
| To compile this codec driver say Y or m. | |
| config SND_SOC_RK3308 | |
| tristate "Rockchip RK3308 audio CODEC" | |
| depends on ARM64 || COMPILE_TEST | |
| depends on ARCH_ROCKCHIP || COMPILE_TEST | |
| select REGMAP_MMIO | |
| help | |
| This is a device driver for the audio codec embedded in the | |
| Rockchip RK3308 SoC. | |
| It has 8 24-bit ADCs and 2 24-bit DACs. The maximum supported | |
| sampling rate is 192 kHz. | |
| config SND_SOC_RK3328 | |
| tristate "Rockchip RK3328 audio CODEC" | |
| depends on ARCH_ROCKCHIP || COMPILE_TEST | |
| select REGMAP_MMIO | |
| config SND_SOC_RK817 | |
| tristate "Rockchip RK817 audio CODEC" | |
| depends on MFD_RK8XX || COMPILE_TEST | |
| config SND_SOC_RL6231 | |
| tristate | |
| default y if SND_SOC_RT5514=y | |
| default y if SND_SOC_RT5616=y | |
| default y if SND_SOC_RT5640=y | |
| default y if SND_SOC_RT5645=y | |
| default y if SND_SOC_RT5651=y | |
| default y if SND_SOC_RT5659=y | |
| default y if SND_SOC_RT5660=y | |
| default y if SND_SOC_RT5663=y | |
| default y if SND_SOC_RT5665=y | |
| default y if SND_SOC_RT5668=y | |
| default y if SND_SOC_RT5670=y | |
| default y if SND_SOC_RT5677=y | |
| default y if SND_SOC_RT5682=y | |
| default y if SND_SOC_RT1011=y | |
| default y if SND_SOC_RT1015=y | |
| default y if SND_SOC_RT1015P=y | |
| default y if SND_SOC_RT1019=y | |
| default y if SND_SOC_RT1305=y | |
| default y if SND_SOC_RT1308=y | |
| default m if SND_SOC_RT5514=m | |
| default m if SND_SOC_RT5616=m | |
| default m if SND_SOC_RT5640=m | |
| default m if SND_SOC_RT5645=m | |
| default m if SND_SOC_RT5651=m | |
| default m if SND_SOC_RT5659=m | |
| default m if SND_SOC_RT5660=m | |
| default m if SND_SOC_RT5663=m | |
| default m if SND_SOC_RT5665=m | |
| default m if SND_SOC_RT5668=m | |
| default m if SND_SOC_RT5670=m | |
| default m if SND_SOC_RT5677=m | |
| default m if SND_SOC_RT5682=m | |
| default m if SND_SOC_RT1011=m | |
| default m if SND_SOC_RT1015=m | |
| default m if SND_SOC_RT1015P=m | |
| default m if SND_SOC_RT1019=m | |
| default m if SND_SOC_RT1305=m | |
| default m if SND_SOC_RT1308=m | |
| config SND_SOC_RT_SDW_COMMON | |
| tristate | |
| default y if SND_SOC_RT721_SDCA_SDW=y | |
| default m if SND_SOC_RT721_SDCA_SDW=m | |
| config SND_SOC_RL6347A | |
| tristate | |
| default y if SND_SOC_RT274=y | |
| default y if SND_SOC_RT286=y | |
| default y if SND_SOC_RT298=y | |
| default m if SND_SOC_RT274=m | |
| default m if SND_SOC_RT286=m | |
| default m if SND_SOC_RT298=m | |
| config SND_SOC_RT274 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT286 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT298 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1011 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1015 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1015P | |
| tristate | |
| config SND_SOC_RT1016 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1017_SDCA_SDW | |
| tristate "Realtek RT1017 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT1019 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1305 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1308 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1308_SDW | |
| tristate "Realtek RT1308 Codec - SDW" | |
| depends on I2C && SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT1316_SDW | |
| tristate "Realtek RT1316 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT1318 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT1318_SDW | |
| tristate "Realtek RT1318 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT1320_SDW | |
| tristate "Realtek RT1320 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT5514 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5514_SPI | |
| tristate | |
| depends on SPI_MASTER | |
| config SND_SOC_RT5514_SPI_BUILTIN | |
| bool # force RT5514_SPI to be built-in to avoid link errors | |
| default SND_SOC_RT5514=y && SND_SOC_RT5514_SPI=m | |
| config SND_SOC_RT5575 | |
| tristate "Realtek ALC5575 Codec - I2C" | |
| depends on I2C | |
| config SND_SOC_RT5575_SPI | |
| bool "Realtek ALC5575 Codec - SPI" | |
| depends on SPI_MASTER && I2C | |
| depends on SND_SOC_RT5575 | |
| depends on SPI_MASTER=y || SND_SOC_RT5575=m | |
| config SND_SOC_RT5616 | |
| tristate "Realtek RT5616 CODEC" | |
| depends on I2C | |
| config SND_SOC_RT5631 | |
| tristate "Realtek ALC5631/RT5631 CODEC" | |
| depends on I2C | |
| config SND_SOC_RT5640 | |
| tristate "Realtek RT5640/RT5639 Codec" | |
| depends on I2C | |
| config SND_SOC_RT5645 | |
| tristate "Realtek RT5645/RT5650 Codec" | |
| depends on I2C | |
| config SND_SOC_RT5651 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5659 | |
| tristate "Realtek RT5658/RT5659 Codec" | |
| depends on I2C | |
| config SND_SOC_RT5660 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5663 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5665 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5668 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5670 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT5677 | |
| tristate "Realtek RT5677 Codec" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select REGMAP_IRQ | |
| config SND_SOC_RT5677_SPI | |
| tristate | |
| default SND_SOC_RT5677 && SPI | |
| config SND_SOC_RT5682 | |
| tristate | |
| config SND_SOC_RT5682_I2C | |
| tristate | |
| depends on I2C | |
| select SND_SOC_RT5682 | |
| config SND_SOC_RT5682_SDW | |
| tristate "Realtek RT5682 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select SND_SOC_RT5682 | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT5682S | |
| tristate | |
| depends on I2C | |
| config SND_SOC_RT700 | |
| tristate | |
| config SND_SOC_RT700_SDW | |
| tristate "Realtek RT700 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select SND_SOC_RT700 | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT711 | |
| tristate | |
| config SND_SOC_RT711_SDW | |
| tristate "Realtek RT711 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select SND_SOC_RT711 | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT711_SDCA_SDW | |
| tristate "Realtek RT711 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT712_SDCA_SDW | |
| tristate "Realtek RT712 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT712_SDCA_DMIC_SDW | |
| tristate "Realtek RT712 SDCA DMIC Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT721_SDCA_SDW | |
| tristate "Realtek RT721 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT722_SDCA_SDW | |
| tristate "Realtek RT722 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT715 | |
| tristate | |
| config SND_SOC_RT715_SDW | |
| tristate "Realtek RT715 Codec - SDW" | |
| depends on SOUNDWIRE | |
| select SND_SOC_RT715 | |
| select REGMAP_SOUNDWIRE | |
| config SND_SOC_RT715_SDCA_SDW | |
| tristate "Realtek RT715 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT766_SDCA_SDW | |
| tristate "Realtek RT766 SDCA Codec - SDW" | |
| depends on SOUNDWIRE | |
| depends on SND_SOC_SDCA_CLASS | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| config SND_SOC_RT9120 | |
| tristate "Richtek RT9120 Stereo Class-D Amplifier" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Enable support for Richtek RT9120 20W, stereo, inductor-less, | |
| high-efficiency Class-D audio amplifier. | |
| config SND_SOC_RT9123 | |
| tristate "Richtek RT9123 Mono Class-D Amplifier" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Enable support for the I2C control mode of Richtek RT9123 3.2W mono | |
| Class-D audio amplifier. | |
| config SND_SOC_RT9123P | |
| tristate "Richtek RT9123P Mono Class-D Amplifier" | |
| help | |
| Enable support for the HW control mode of Richtek RT9123P 3.2W mono | |
| Class-D audio amplifier. | |
| config SND_SOC_RTQ9124 | |
| tristate "Richtek RTQ9124 Mono Class-D Amplifier" | |
| depends on I2C | |
| select REGMAP | |
| help | |
| Enable support for Richtek RTQ9124 1x30W digital input automotive | |
| audio amplifier with current sense and real-time load diagnostics. | |
| config SND_SOC_RTQ9128 | |
| tristate "Richtek RTQ9128 45W Digital Input Amplifier" | |
| depends on I2C | |
| select REGMAP | |
| help | |
| Enable support for Richtek RTQ9128 digital input 4-channel | |
| automotive audio amplifier. It is a ultra-low output noise, | |
| high-efficiency, four-channel class-D audio power amplifier | |
| that can deliver over 87% power efficienty at 4x75W into 4Ohm, | |
| 25V supply in automotive applications. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-soc-rtq9128. | |
| config SND_SOC_SDW_MOCKUP | |
| tristate "SoundWire mockup codec" | |
| depends on EXPERT | |
| depends on SOUNDWIRE | |
| help | |
| This option enables a SoundWire mockup codec that does not drive the | |
| bus, take part in the command/command protocol or generate data on a | |
| Source port. | |
| This option is only intended to be used for tests on a device | |
| with a connector, in combination with a bus analyzer, or to test new | |
| topologies that differ from the actual hardware layout. | |
| This mockup device could be totally virtual but could also be a | |
| real physical one with one key restriction: it is not allowed by the | |
| SoundWire specification to be configured via a sideband mechanism and | |
| generate audio data for capture. However, nothing prevents such a | |
| peripheral device from snooping the bus. | |
| #Freescale sgtl5000 codec | |
| config SND_SOC_SGTL5000 | |
| tristate "Freescale SGTL5000 CODEC" | |
| depends on I2C | |
| config SND_SOC_SI476X | |
| tristate | |
| depends on MFD_SI476X_CORE | |
| config SND_SOC_SIGMADSP | |
| tristate | |
| select CRC32 | |
| config SND_SOC_SIGMADSP_I2C | |
| tristate | |
| select SND_SOC_SIGMADSP | |
| config SND_SOC_SIGMADSP_REGMAP | |
| tristate | |
| select SND_SOC_SIGMADSP | |
| config SND_SOC_SIMPLE_AMPLIFIER | |
| tristate "Simple Audio Amplifier" | |
| config SND_SOC_SIMPLE_MUX | |
| tristate "Simple Audio Mux" | |
| depends on GPIOLIB | |
| config SND_SOC_SMA1303 | |
| tristate "Iron Device SMA1303 Audio Amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Iron Device SMA1303 Boosted Class-D amplifier | |
| config SND_SOC_SMA1307 | |
| tristate "Iron Device SMA1307 Audio Amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Iron Device SMA1307 boosted digital speaker | |
| amplifier with feedback-loop. | |
| If you are using a system with an SMA1307 amplifier connected | |
| via I2C, enable this option. | |
| config SND_SOC_SPDIF | |
| tristate "S/PDIF CODEC" | |
| config SND_SOC_SRC4XXX_I2C | |
| tristate "Texas Instruments SRC4XXX DIR/DIT and SRC codecs" | |
| depends on I2C | |
| select SND_SOC_SRC4XXX | |
| help | |
| Enable support for the TI SRC4XXX family of codecs. These include the | |
| scr4392 which has digital receivers, transmitters, and | |
| a sample rate converter, including numerous ports. | |
| config SND_SOC_SRC4XXX | |
| tristate | |
| config SND_SOC_SSM2305 | |
| tristate "Analog Devices SSM2305 Class-D Amplifier" | |
| help | |
| Enable support for Analog Devices SSM2305 filterless | |
| high-efficiency mono Class-D audio power amplifiers. | |
| config SND_SOC_SSM2518 | |
| tristate "Analog Devices SSM2518 Class-D Amplifier" | |
| depends on I2C | |
| config SND_SOC_SSM2602 | |
| tristate | |
| config SND_SOC_SSM2602_SPI | |
| tristate "Analog Devices SSM2602 CODEC - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_SSM2602 | |
| select REGMAP_SPI | |
| config SND_SOC_SSM2602_I2C | |
| tristate "Analog Devices SSM2602 CODEC - I2C" | |
| depends on I2C | |
| select SND_SOC_SSM2602 | |
| select REGMAP_I2C | |
| config SND_SOC_SSM3515 | |
| tristate "Analog Devices SSM3515 amplifier driver" | |
| select REGMAP_I2C | |
| depends on I2C | |
| depends on OF | |
| config SND_SOC_SSM4567 | |
| tristate "Analog Devices ssm4567 amplifier driver support" | |
| depends on I2C | |
| config SND_SOC_STA32X | |
| tristate "STA326, STA328 and STA329 speaker amplifier" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_STA350 | |
| tristate "STA350 speaker amplifier" | |
| depends on I2C | |
| config SND_SOC_STA529 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_STAC9766 | |
| tristate | |
| depends on SND_SOC_AC97_BUS | |
| select REGMAP_AC97 | |
| config SND_SOC_STI_SAS | |
| tristate "codec Audio support for STI SAS codec" | |
| config SND_SOC_TAC5XX2_SDW | |
| tristate "Texas Instruments TAC5XX2 SoundWire Smart Amplifier" | |
| depends on SOUNDWIRE | |
| depends on SND_SOC_SDCA | |
| select REGMAP_SOUNDWIRE_MBQ | |
| help | |
| This option enables support for Texas Instruments TAC5XX2 family | |
| of SoundWire Smart Amplifiers. This includes TAC5572, TAC5672, | |
| TAC5682 and TAS2883. To compile this driver as a module, choose | |
| M here: the module will be called snd-soc-tac5xx2. | |
| config SND_SOC_TAS2552 | |
| tristate "Texas Instruments TAS2552 Mono Audio amplifier" | |
| depends on I2C | |
| config SND_SOC_TAS2562 | |
| tristate "Texas Instruments TAS2562 Mono Audio amplifier" | |
| depends on I2C | |
| config SND_SOC_TAS2764 | |
| tristate "Texas Instruments TAS2764 Mono Audio amplifier" | |
| depends on I2C | |
| config SND_SOC_TAS2770 | |
| tristate "Texas Instruments TAS2770 speaker amplifier" | |
| depends on I2C | |
| config SND_SOC_TAS2780 | |
| tristate "Texas Instruments TAS2780 Mono Audio amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Texas Instruments TAS2780 high-efficiency | |
| digital input mono Class-D audio power amplifiers. | |
| config SND_SOC_TAS2781_COMLIB | |
| tristate | |
| config SND_SOC_TAS2781_COMLIB_I2C | |
| depends on I2C | |
| select CRC8 | |
| select REGMAP_I2C | |
| tristate | |
| config SND_SOC_TAS2781_FMWLIB | |
| select SND_SOC_TAS2781_COMLIB | |
| select CRC8 | |
| tristate | |
| default n | |
| config SND_SOC_TAS2781_I2C | |
| tristate "Texas Instruments TAS2781 speaker amplifier based on I2C" | |
| depends on I2C | |
| select SND_SOC_TAS2781_COMLIB_I2C | |
| select SND_SOC_TAS2781_FMWLIB | |
| help | |
| Enable support for Texas Instruments TAS2781 Smart Amplifier | |
| Digital input mono Class-D and DSP-inside audio power amplifiers. | |
| Note the TAS2781 driver implements a flexible and configurable | |
| algo coefficient setting, for one, two or even multiple TAS2781 | |
| chips. | |
| config SND_SOC_TAS2783_SDW | |
| tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" | |
| depends on SOUNDWIRE | |
| depends on SND_SOC_SDCA | |
| depends on EFI | |
| select REGMAP_SOUNDWIRE | |
| select REGMAP_SOUNDWIRE_MBQ | |
| select CRC32 | |
| help | |
| Enable support for Texas Instruments TAS2783A Digital input | |
| mono Class-D and DSP-inside audio power amplifiers. TAS2783 | |
| driver implements a flexible and configurable algorithm | |
| cofficient setting, for one, two or multiple TAS2783 chips. | |
| config SND_SOC_TAS5086 | |
| tristate "Texas Instruments TAS5086 speaker amplifier" | |
| depends on I2C | |
| config SND_SOC_TAS571X | |
| tristate "Texas Instruments TAS571x power amplifiers" | |
| depends on I2C | |
| help | |
| Enable support for Texas Instruments TAS5707, TAS5711, TAS5717, | |
| TAS5719 and TAS5721 power amplifiers | |
| config SND_SOC_TAS5720 | |
| tristate "Texas Instruments TAS5720 Mono Audio amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Texas Instruments TAS5720L/M high-efficiency mono | |
| Class-D audio power amplifiers. | |
| config SND_SOC_TAS5805M | |
| tristate "Texas Instruments TAS5805M speaker amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Texas Instruments TAS5805M Class-D | |
| amplifiers. This is a speaker amplifier with an integrated | |
| DSP. DSP configuration for each instance needs to be supplied | |
| via a device-tree attribute. | |
| config SND_SOC_TAS6424 | |
| tristate "Texas Instruments TAS6424 Quad-Channel Audio amplifier" | |
| depends on I2C | |
| help | |
| Enable support for Texas Instruments TAS6424 high-efficiency | |
| digital input quad-channel Class-D audio power amplifiers. | |
| config SND_SOC_TAS675X | |
| tristate "Texas Instruments TAS675x Quad-Channel Audio Amplifier" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Enable support for Texas Instruments TAS675x quad-channel Class-D | |
| audio power amplifiers (TAS6754, TAS67524). The devices support I2S | |
| and TDM interfaces with real-time voltage and current sense feedback | |
| via SDOUT, and provide DC/AC/real-time load diagnostics for speaker | |
| monitoring. | |
| config SND_SOC_TDA7419 | |
| tristate "ST TDA7419 audio processor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_TFA9879 | |
| tristate "NXP Semiconductors TFA9879 amplifier" | |
| depends on I2C | |
| config SND_SOC_TFA989X | |
| tristate "NXP/Goodix TFA989X (TFA1) amplifiers" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Enable support for NXP (now Goodix) TFA989X (TFA1 family) speaker | |
| amplifiers, e.g. TFA9895. | |
| Note that the driver currently bypasses the built-in "CoolFlux DSP" | |
| and does not support (hardware) volume control. | |
| config SND_SOC_TLV320ADC3XXX | |
| tristate "Texas Instruments TLV320ADC3001/3101 audio ADC" | |
| depends on I2C | |
| depends on GPIOLIB | |
| help | |
| Enable support for Texas Instruments TLV320ADC3001 and TLV320ADC3101 | |
| ADCs. | |
| config SND_SOC_TLV320AIC23 | |
| tristate | |
| config SND_SOC_TLV320AIC23_I2C | |
| tristate "Texas Instruments TLV320AIC23 audio CODEC - I2C" | |
| depends on I2C | |
| select SND_SOC_TLV320AIC23 | |
| config SND_SOC_TLV320AIC23_SPI | |
| tristate "Texas Instruments TLV320AIC23 audio CODEC - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_TLV320AIC23 | |
| config SND_SOC_TLV320AIC26 | |
| tristate | |
| depends on SPI | |
| config SND_SOC_TLV320AIC31XX | |
| tristate "Texas Instruments TLV320AIC31xx CODECs" | |
| depends on I2C | |
| select REGMAP_I2C | |
| config SND_SOC_TLV320AIC32X4 | |
| tristate | |
| depends on COMMON_CLK | |
| config SND_SOC_TLV320AIC32X4_I2C | |
| tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C" | |
| depends on I2C | |
| depends on COMMON_CLK | |
| select SND_SOC_TLV320AIC32X4 | |
| config SND_SOC_TLV320AIC32X4_SPI | |
| tristate "Texas Instruments TLV320AIC32x4 audio CODECs - SPI" | |
| depends on SPI_MASTER | |
| depends on COMMON_CLK | |
| select SND_SOC_TLV320AIC32X4 | |
| config SND_SOC_TLV320AIC3X | |
| tristate | |
| config SND_SOC_TLV320AIC3X_I2C | |
| tristate "Texas Instruments TLV320AIC3x audio CODECs - I2C" | |
| depends on I2C | |
| select SND_SOC_TLV320AIC3X | |
| select REGMAP_I2C | |
| config SND_SOC_TLV320AIC3X_SPI | |
| tristate "Texas Instruments TLV320AIC3x audio CODECs - SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_TLV320AIC3X | |
| select REGMAP_SPI | |
| config SND_SOC_TLV320DAC33 | |
| tristate | |
| depends on I2C | |
| depends on GPIOLIB_LEGACY | |
| config SND_SOC_TLV320ADCX140 | |
| tristate "Texas Instruments TLV320ADCX140 CODEC family" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Add support for Texas Instruments tlv320adc3140, tlv320adc5140 and | |
| tlv320adc6140 quad channel ADCs. | |
| config SND_SOC_TS3A227E | |
| tristate "TI Headset/Mic detect and keypress chip" | |
| depends on I2C | |
| config SND_SOC_TSCS42XX | |
| tristate "Tempo Semiconductor TSCS42xx CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Add support for Tempo Semiconductor's TSCS42xx audio CODEC. | |
| config SND_SOC_TSCS454 | |
| tristate "Tempo Semiconductor TSCS454 CODEC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Add support for Tempo Semiconductor's TSCS454 audio CODEC. | |
| config SND_SOC_TWL4030 | |
| tristate | |
| depends on TWL4030_CORE | |
| select MFD_TWL4030_AUDIO | |
| config SND_SOC_TWL6040 | |
| tristate | |
| depends on TWL6040_CORE | |
| config SND_SOC_UDA1334 | |
| tristate "NXP UDA1334 DAC" | |
| depends on GPIOLIB | |
| help | |
| The UDA1334 is an NXP audio codec, supports the I2S-bus data format | |
| and has basic features such as de-emphasis (at 44.1 kHz sampling | |
| rate) and mute. | |
| config SND_SOC_UDA1342 | |
| tristate "NXP UDA1342 CODEC" | |
| depends on I2C | |
| help | |
| The UDA1342 is an NXP audio codec, support 2x Stereo audio ADC (4x PGA | |
| mic inputs), stereo audio DAC, with basic audio processing. | |
| config SND_SOC_UDA1380 | |
| tristate "Philips UDA1380 CODEC" | |
| depends on I2C | |
| help | |
| The UDA1380 codec is used in the HTC Magician and on a number of | |
| Samsung reference boards, as well as the LPC32xx series. | |
| config SND_SOC_WCD_CLASSH | |
| tristate | |
| config SND_SOC_WCD_COMMON | |
| tristate | |
| config SND_SOC_WCD9335 | |
| tristate "WCD9335 Codec" | |
| depends on SLIMBUS | |
| select REGMAP_SLIMBUS | |
| select REGMAP_IRQ | |
| select SND_SOC_WCD_CLASSH | |
| help | |
| The WCD9335 is a standalone Hi-Fi audio CODEC IC, supports | |
| Qualcomm Technologies, Inc. (QTI) multimedia solutions, | |
| including the MSM8996, MSM8976, and MSM8956 chipsets. | |
| config SND_SOC_WCD_MBHC | |
| tristate | |
| config SND_SOC_WCD934X | |
| tristate "WCD9340/WCD9341 Codec" | |
| depends on COMMON_CLK | |
| depends on SLIMBUS | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| select REGMAP_IRQ | |
| select REGMAP_SLIMBUS | |
| select SND_SOC_WCD_CLASSH | |
| select SND_SOC_WCD_COMMON | |
| select SND_SOC_WCD_MBHC | |
| depends on MFD_WCD934X || COMPILE_TEST | |
| help | |
| The WCD9340/9341 is a audio codec IC Integrated in | |
| Qualcomm SoCs like SDM845. | |
| config SND_SOC_WCD937X | |
| depends on SND_SOC_WCD937X_SDW | |
| tristate | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| select SND_SOC_WCD_CLASSH | |
| select SND_SOC_WCD_COMMON | |
| config SND_SOC_WCD937X_SDW | |
| tristate "WCD9370/WCD9375 Codec - SDW" | |
| select SND_SOC_WCD937X | |
| select SND_SOC_WCD_MBHC | |
| select REGMAP_IRQ | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| The WCD9370/9375 is an audio codec IC used with SoCs | |
| like SC7280 or QCM6490 chipsets, and it connected | |
| via soundwire. | |
| To compile this codec driver say Y or m. | |
| config SND_SOC_WCD938X | |
| depends on SND_SOC_WCD938X_SDW | |
| tristate | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| select SND_SOC_WCD_CLASSH | |
| select SND_SOC_WCD_COMMON | |
| select MULTIPLEXER | |
| config SND_SOC_WCD938X_SDW | |
| tristate "WCD9380/WCD9385 Codec - SDW" | |
| select SND_SOC_WCD938X | |
| select SND_SOC_WCD_MBHC | |
| select REGMAP_IRQ | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| The WCD9380/9385 is a audio codec IC Integrated in | |
| Qualcomm SoCs like SM8250. | |
| config SND_SOC_WCD939X | |
| depends on SND_SOC_WCD939X_SDW | |
| tristate | |
| depends on SOUNDWIRE || !SOUNDWIRE | |
| depends on TYPEC || !TYPEC | |
| select SND_SOC_WCD_CLASSH | |
| select SND_SOC_WCD_COMMON | |
| config SND_SOC_WCD939X_SDW | |
| tristate "WCD9390/WCD9395 Codec - SDW" | |
| depends on TYPEC || !TYPEC | |
| select SND_SOC_WCD939X | |
| select SND_SOC_WCD_MBHC | |
| select REGMAP_IRQ | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| The WCD9390/9395 is a audio codec IC Integrated in | |
| Qualcomm SoCs like SM8650. | |
| config SND_SOC_WM0010 | |
| tristate | |
| depends on SPI_MASTER | |
| config SND_SOC_WM1250_EV1 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM2000 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM2200 | |
| tristate | |
| depends on I2C | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_WM5100 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM5102 | |
| tristate | |
| depends on MFD_WM5102 && MFD_ARIZONA | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_WM5110 | |
| tristate | |
| depends on MFD_WM5110 && MFD_ARIZONA | |
| select SND_SOC_WM_ADSP | |
| config SND_SOC_WM8350 | |
| tristate | |
| depends on MFD_WM8350 | |
| config SND_SOC_WM8400 | |
| tristate | |
| # FIXME nothing selects SND_SOC_WM8400?? | |
| depends on MFD_WM8400 | |
| config SND_SOC_WM8510 | |
| tristate "Wolfson Microelectronics WM8510 CODEC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8523 | |
| tristate "Wolfson Microelectronics WM8523 DAC" | |
| depends on I2C | |
| config SND_SOC_WM8524 | |
| tristate "Wolfson Microelectronics WM8524 DAC" | |
| depends on GPIOLIB | |
| config SND_SOC_WM8580 | |
| tristate "Wolfson Microelectronics WM8580 and WM8581 CODECs" | |
| depends on I2C | |
| config SND_SOC_WM8711 | |
| tristate "Wolfson Microelectronics WM8711 CODEC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8727 | |
| tristate | |
| config SND_SOC_WM8728 | |
| tristate "Wolfson Microelectronics WM8728 DAC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8731 | |
| tristate | |
| config SND_SOC_WM8731_I2C | |
| tristate "Wolfson Microelectronics WM8731 CODEC with I2C" | |
| depends on I2C | |
| select REGMAP | |
| select SND_SOC_WM8731 | |
| config SND_SOC_WM8731_SPI | |
| tristate "Wolfson Microelectronics WM8731 CODEC with SPI" | |
| depends on SPI | |
| select REGMAP | |
| select SND_SOC_WM8731 | |
| config SND_SOC_WM8737 | |
| tristate "Wolfson Microelectronics WM8737 ADC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8741 | |
| tristate "Wolfson Microelectronics WM8741 DAC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8750 | |
| tristate "Wolfson Microelectronics WM8750 CODEC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8753 | |
| tristate "Wolfson Microelectronics WM8753 CODEC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8770 | |
| tristate "Wolfson Microelectronics WM8770 CODEC" | |
| depends on SPI_MASTER | |
| config SND_SOC_WM8776 | |
| tristate "Wolfson Microelectronics WM8776 CODEC" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8782 | |
| tristate "Wolfson Microelectronics WM8782 ADC" | |
| config SND_SOC_WM8804 | |
| tristate | |
| config SND_SOC_WM8804_I2C | |
| tristate "Wolfson Microelectronics WM8804 S/PDIF transceiver I2C" | |
| depends on I2C | |
| select SND_SOC_WM8804 | |
| select REGMAP_I2C | |
| config SND_SOC_WM8804_SPI | |
| tristate "Wolfson Microelectronics WM8804 S/PDIF transceiver SPI" | |
| depends on SPI_MASTER | |
| select SND_SOC_WM8804 | |
| select REGMAP_SPI | |
| config SND_SOC_WM8900 | |
| tristate | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8903 | |
| tristate "Wolfson Microelectronics WM8903 CODEC" | |
| depends on I2C | |
| config SND_SOC_WM8904 | |
| tristate "Wolfson Microelectronics WM8904 CODEC" | |
| depends on I2C | |
| config SND_SOC_WM8940 | |
| tristate "Wolfson Microelectronics WM8940 codec" | |
| depends on I2C | |
| config SND_SOC_WM8955 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM8960 | |
| tristate "Wolfson Microelectronics WM8960 CODEC" | |
| depends on I2C | |
| config SND_SOC_WM8961 | |
| tristate "Wolfson Microelectronics WM8961 CODEC" | |
| depends on I2C | |
| config SND_SOC_WM8962 | |
| tristate "Wolfson Microelectronics WM8962 CODEC" | |
| depends on I2C && INPUT | |
| config SND_SOC_WM8971 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM8974 | |
| tristate "Wolfson Microelectronics WM8974 codec" | |
| depends on I2C | |
| config SND_SOC_WM8978 | |
| tristate "Wolfson Microelectronics WM8978 codec" | |
| depends on I2C | |
| config SND_SOC_WM8983 | |
| tristate | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8985 | |
| tristate "Wolfson Microelectronics WM8985 and WM8758 codec driver" | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8988 | |
| tristate | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8990 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM8991 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM8993 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM8994 | |
| tristate | |
| depends on MFD_WM8994 | |
| config SND_SOC_WM8995 | |
| tristate | |
| depends on SND_SOC_I2C_AND_SPI | |
| config SND_SOC_WM8996 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM8997 | |
| tristate | |
| depends on MFD_WM8997 && MFD_ARIZONA | |
| config SND_SOC_WM8998 | |
| tristate "Wolfson Microelectronics WM8998 codec driver" | |
| depends on MFD_WM8998 && MFD_ARIZONA | |
| config SND_SOC_WM9081 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM9090 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_WM9705 | |
| tristate | |
| depends on SND_SOC_AC97_BUS || AC97_BUS_NEW | |
| select REGMAP_AC97 | |
| select AC97_BUS_COMPAT if AC97_BUS_NEW | |
| config SND_SOC_WM9712 | |
| tristate | |
| depends on SND_SOC_AC97_BUS || AC97_BUS_NEW | |
| select REGMAP_AC97 | |
| select AC97_BUS_COMPAT if AC97_BUS_NEW | |
| config SND_SOC_WM9713 | |
| tristate | |
| depends on SND_SOC_AC97_BUS || AC97_BUS_NEW | |
| select REGMAP_AC97 | |
| select AC97_BUS_COMPAT if AC97_BUS_NEW | |
| config SND_SOC_WSA881X | |
| tristate "WSA881X Codec" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| This enables support for Qualcomm WSA8810/WSA8815 Class-D | |
| Smart Speaker Amplifier. | |
| config SND_SOC_WSA883X | |
| tristate "WSA883X Codec" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| This enables support for Qualcomm WSA8830/WSA8835 Class-D | |
| Smart Speaker Amplifier. | |
| config SND_SOC_WSA884X | |
| tristate "WSA884X Codec" | |
| depends on SOUNDWIRE | |
| select REGMAP_SOUNDWIRE | |
| help | |
| This enables support for Qualcomm WSA8840/WSA8845/WSA8845H Class-D | |
| Smart Speaker Amplifier. | |
| config SND_SOC_WSA885X | |
| tristate "WSA885X Codec" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This enables support for Qualcomm WSA885X Stereo Smart Speaker | |
| Amplifier. The codec driver programs the amplifier register | |
| map and exposes the DAI and mixer controls used by Qualcomm | |
| audio machine drivers. | |
| config SND_SOC_ZL38060 | |
| tristate "Microsemi ZL38060 Connected Home Audio Processor" | |
| depends on SPI_MASTER | |
| depends on GPIOLIB | |
| select REGMAP | |
| help | |
| Support for ZL38060 Connected Home Audio Processor from Microsemi, | |
| which consists of a Digital Signal Processor (DSP), several Digital | |
| Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs. | |
| # Amp | |
| config SND_SOC_LM4857 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX9759 | |
| tristate "Maxim MAX9759 speaker Amplifier" | |
| depends on GPIOLIB | |
| config SND_SOC_MAX9768 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MAX9877 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MC13783 | |
| tristate | |
| depends on MFD_MC13XXX | |
| config SND_SOC_ML26124 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_MT6351 | |
| tristate "MediaTek MT6351 Codec" | |
| config SND_SOC_MT6357 | |
| tristate "MediaTek MT6357 Codec" | |
| help | |
| Enable support for the platform which uses MT6357 as | |
| external codec device. | |
| config SND_SOC_MT6358 | |
| tristate "MediaTek MT6358 Codec" | |
| help | |
| Enable support for the platform which uses MT6358 as | |
| external codec device. | |
| config SND_SOC_MT6359 | |
| tristate "MediaTek MT6359 Codec" | |
| depends on MTK_PMIC_WRAP | |
| help | |
| Enable support for the platform which uses MT6359 as | |
| external codec device. | |
| config SND_SOC_MT6359_ACCDET | |
| tristate "MediaTek MT6359 ACCDET driver" | |
| depends on MTK_PMIC_WRAP | |
| help | |
| ACCDET means Accessory Detection technology, MediaTek develop it | |
| for ASoC codec soc-jack detection mechanism. | |
| Select N if you don't have jack on board. | |
| config SND_SOC_MT6660 | |
| tristate "Mediatek MT6660 Speaker Amplifier" | |
| depends on I2C | |
| help | |
| MediaTek MT6660 is a smart power amplifier which contain | |
| speaker protection, multi-band DRC, equalizer functions. | |
| Select N if you don't have MT6660 on board. | |
| Select M to build this as module. | |
| config SND_SOC_NAU8315 | |
| tristate "Nuvoton Technology Corporation NAU8315 CODEC" | |
| config SND_SOC_NAU8325 | |
| tristate "Nuvoton Technology Corporation NAU8325 CODEC" | |
| depends on I2C | |
| config SND_SOC_NAU8540 | |
| tristate "Nuvoton Technology Corporation NAU85L40 CODEC" | |
| depends on I2C | |
| config SND_SOC_NAU8810 | |
| tristate "Nuvoton Technology Corporation NAU88C10 CODEC" | |
| depends on I2C | |
| config SND_SOC_NAU8821 | |
| tristate "Nuvoton Technology Corporation NAU88L21 CODEC" | |
| depends on I2C | |
| config SND_SOC_NAU8822 | |
| tristate "Nuvoton Technology Corporation NAU88C22 CODEC" | |
| depends on I2C | |
| config SND_SOC_NAU8824 | |
| tristate "Nuvoton Technology Corporation NAU88L24 CODEC" | |
| depends on I2C | |
| config SND_SOC_NAU8825 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_NTPFW | |
| tristate | |
| config SND_SOC_NTP8918 | |
| select SND_SOC_NTPFW | |
| tristate "NeoFidelity NTP8918 amplifier" | |
| depends on I2C | |
| config SND_SOC_NTP8835 | |
| select SND_SOC_NTPFW | |
| tristate "NeoFidelity NTP8835 and NTP8835C amplifiers" | |
| depends on I2C | |
| config SND_SOC_TPA6130A2 | |
| tristate "Texas Instruments TPA6130A2 headphone amplifier" | |
| depends on I2C | |
| config SND_SOC_LPASS_MACRO_COMMON | |
| tristate | |
| config SND_SOC_LPASS_WSA_MACRO | |
| depends on COMMON_CLK | |
| depends on PM_CLK | |
| select REGMAP_MMIO | |
| select SND_SOC_LPASS_MACRO_COMMON | |
| tristate "Qualcomm WSA Macro in LPASS(Low Power Audio SubSystem)" | |
| config SND_SOC_LPASS_VA_MACRO | |
| depends on COMMON_CLK | |
| depends on PM_CLK | |
| select REGMAP_MMIO | |
| select SND_SOC_LPASS_MACRO_COMMON | |
| tristate "Qualcomm VA Macro in LPASS(Low Power Audio SubSystem)" | |
| config SND_SOC_LPASS_RX_MACRO | |
| depends on COMMON_CLK | |
| depends on PM_CLK | |
| select REGMAP_MMIO | |
| select SND_SOC_LPASS_MACRO_COMMON | |
| tristate "Qualcomm RX Macro in LPASS(Low Power Audio SubSystem)" | |
| config SND_SOC_LPASS_TX_MACRO | |
| depends on COMMON_CLK | |
| depends on PM_CLK | |
| select REGMAP_MMIO | |
| select SND_SOC_LPASS_MACRO_COMMON | |
| tristate "Qualcomm TX Macro in LPASS(Low Power Audio SubSystem)" | |
| endmenu |