| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Intel HDMI codec support | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <sound/core.h> | |
| #include <sound/hdaudio.h> | |
| #include <sound/hda_i915.h> | |
| #include <sound/hda_codec.h> | |
| #include "hda_local.h" | |
| #include "hdmi_local.h" | |
| static bool enable_silent_stream = | |
| IS_ENABLED(CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM); | |
| module_param(enable_silent_stream, bool, 0644); | |
| MODULE_PARM_DESC(enable_silent_stream, "Enable Silent Stream for HDMI devices"); | |
| enum { | |
| MODEL_HSW, | |
| MODEL_GLK, | |
| MODEL_ICL, | |
| MODEL_TGL, | |
| MODEL_ADLP, | |
| MODEL_BYT, | |
| MODEL_CPT, | |
| }; | |
| #define INTEL_GET_VENDOR_VERB 0xf81 | |
| #define INTEL_SET_VENDOR_VERB 0x781 | |
| #define INTEL_EN_DP12 0x02 /* enable DP 1.2 features */ | |
| #define INTEL_EN_ALL_PIN_CVTS 0x01 /* enable 2nd & 3rd pins and convertors */ | |
| static void intel_haswell_enable_all_pins(struct hda_codec *codec, | |
| bool update_tree) | |
| { | |
| unsigned int vendor_param; | |
| struct hdmi_spec *spec = codec->spec; | |
| vendor_param = snd_hda_codec_read(codec, spec->vendor_nid, 0, | |
| INTEL_GET_VENDOR_VERB, 0); | |
| if (vendor_param == -1 || vendor_param & INTEL_EN_ALL_PIN_CVTS) | |
| return; | |
| vendor_param |= INTEL_EN_ALL_PIN_CVTS; | |
| vendor_param = snd_hda_codec_read(codec, spec->vendor_nid, 0, | |
| INTEL_SET_VENDOR_VERB, vendor_param); | |
| if (vendor_param == -1) | |
| return; | |
| if (update_tree) | |
| snd_hda_codec_update_widgets(codec); | |
| } | |
| static void intel_haswell_fixup_enable_dp12(struct hda_codec *codec) | |
| { | |
| unsigned int vendor_param; | |
| struct hdmi_spec *spec = codec->spec; | |
| vendor_param = snd_hda_codec_read(codec, spec->vendor_nid, 0, | |
| INTEL_GET_VENDOR_VERB, 0); | |
| if (vendor_param == -1 || vendor_param & INTEL_EN_DP12) | |
| return; | |
| /* enable DP1.2 mode */ | |
| vendor_param |= INTEL_EN_DP12; | |
| snd_hdac_regmap_add_vendor_verb(&codec->core, INTEL_SET_VENDOR_VERB); | |
| snd_hda_codec_write_cache(codec, spec->vendor_nid, 0, | |
| INTEL_SET_VENDOR_VERB, vendor_param); | |
| } | |
| /* Haswell needs to re-issue the vendor-specific verbs before turning to D0. | |
| * Otherwise you may get severe h/w communication errors. | |
| */ | |
| static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg, | |
| unsigned int power_state) | |
| { | |
| /* check codec->spec: it can be called before the probe gets called */ | |
| if (codec->spec) { | |
| if (power_state == AC_PWRST_D0) { | |
| intel_haswell_enable_all_pins(codec, false); | |
| intel_haswell_fixup_enable_dp12(codec); | |
| } | |
| } | |
| snd_hda_codec_write_sync(codec, fg, 0, AC_VERB_SET_POWER_STATE, power_state); | |
| snd_hda_codec_set_power_to_all(codec, fg, power_state); | |
| } | |
| /* There is a fixed mapping between audio pin node and display port. | |
| * on SNB, IVY, HSW, BSW, SKL, BXT, KBL: | |
| * Pin Widget 5 - PORT B (port = 1 in i915 driver) | |
| * Pin Widget 6 - PORT C (port = 2 in i915 driver) | |
| * Pin Widget 7 - PORT D (port = 3 in i915 driver) | |
| * | |
| * on VLV, ILK: | |
| * Pin Widget 4 - PORT B (port = 1 in i915 driver) | |
| * Pin Widget 5 - PORT C (port = 2 in i915 driver) | |
| * Pin Widget 6 - PORT D (port = 3 in i915 driver) | |
| */ | |
| static int intel_base_nid(struct hda_codec *codec) | |
| { | |
| switch (codec->core.vendor_id) { | |
| case 0x80860054: /* ILK */ | |
| case 0x80862804: /* ILK */ | |
| case 0x80862882: /* VLV */ | |
| return 4; | |
| default: | |
| return 5; | |
| } | |
| } | |
| static int intel_pin2port(void *audio_ptr, int pin_nid) | |
| { | |
| struct hda_codec *codec = audio_ptr; | |
| struct hdmi_spec *spec = codec->spec; | |
| int base_nid, i; | |
| if (!spec->port_num) { | |
| base_nid = intel_base_nid(codec); | |
| if (WARN_ON(pin_nid < base_nid || pin_nid >= base_nid + 3)) | |
| return -1; | |
| return pin_nid - base_nid + 1; | |
| } | |
| /* | |
| * looking for the pin number in the mapping table and return | |
| * the index which indicate the port number | |
| */ | |
| for (i = 0; i < spec->port_num; i++) { | |
| if (pin_nid == spec->port_map[i]) | |
| return i; | |
| } | |
| codec_info(codec, "Can't find the HDMI/DP port for pin NID 0x%x\n", pin_nid); | |
| return -1; | |
| } | |
| static int intel_port2pin(struct hda_codec *codec, int port) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| if (!spec->port_num) { | |
| /* we assume only from port-B to port-D */ | |
| if (port < 1 || port > 3) | |
| return 0; | |
| return port + intel_base_nid(codec) - 1; | |
| } | |
| if (port < 0 || port >= spec->port_num) | |
| return 0; | |
| return spec->port_map[port]; | |
| } | |
| static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe) | |
| { | |
| struct hda_codec *codec = audio_ptr; | |
| int pin_nid; | |
| int dev_id = pipe; | |
| pin_nid = intel_port2pin(codec, port); | |
| if (!pin_nid) | |
| return; | |
| /* skip notification during system suspend (but not in runtime PM); | |
| * the state will be updated at resume | |
| */ | |
| if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND) | |
| return; | |
| snd_hdac_i915_set_bclk(&codec->bus->core); | |
| snd_hda_hdmi_check_presence_and_report(codec, pin_nid, dev_id); | |
| } | |
| static const struct drm_audio_component_audio_ops intel_audio_ops = { | |
| .pin2port = intel_pin2port, | |
| .pin_eld_notify = intel_pin_eld_notify, | |
| }; | |
| /* register i915 component pin_eld_notify callback */ | |
| static void register_i915_notifier(struct hda_codec *codec) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| spec->use_acomp_notifier = true; | |
| spec->port2pin = intel_port2pin; | |
| snd_hda_hdmi_setup_drm_audio_ops(codec, &intel_audio_ops); | |
| snd_hdac_acomp_register_notifier(&codec->bus->core, | |
| &spec->drm_audio_ops); | |
| /* no need for forcible resume for jack check thanks to notifier */ | |
| codec->relaxed_resume = 1; | |
| } | |
| #define I915_SILENT_RATE 48000 | |
| #define I915_SILENT_CHANNELS 2 | |
| #define I915_SILENT_FORMAT_BITS 16 | |
| #define I915_SILENT_FMT_MASK 0xf | |
| static void silent_stream_enable_i915(struct hda_codec *codec, | |
| struct hdmi_spec_per_pin *per_pin) | |
| { | |
| unsigned int format; | |
| snd_hdac_sync_audio_rate(&codec->core, per_pin->pin_nid, | |
| per_pin->dev_id, I915_SILENT_RATE); | |
| /* trigger silent stream generation in hw */ | |
| format = snd_hdac_stream_format(I915_SILENT_CHANNELS, I915_SILENT_FORMAT_BITS, | |
| I915_SILENT_RATE); | |
| snd_hda_codec_setup_stream(codec, per_pin->cvt_nid, | |
| I915_SILENT_FMT_MASK, I915_SILENT_FMT_MASK, format); | |
| usleep_range(100, 200); | |
| snd_hda_codec_setup_stream(codec, per_pin->cvt_nid, I915_SILENT_FMT_MASK, 0, format); | |
| per_pin->channels = I915_SILENT_CHANNELS; | |
| snd_hda_hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); | |
| } | |
| static void silent_stream_set_kae(struct hda_codec *codec, | |
| struct hdmi_spec_per_pin *per_pin, | |
| bool enable) | |
| { | |
| unsigned int param; | |
| codec_dbg(codec, "HDMI: KAE %d cvt-NID=0x%x\n", enable, per_pin->cvt_nid); | |
| param = snd_hda_codec_read(codec, per_pin->cvt_nid, 0, AC_VERB_GET_DIGI_CONVERT_1, 0); | |
| param = (param >> 16) & 0xff; | |
| if (enable) | |
| param |= AC_DIG3_KAE; | |
| else | |
| param &= ~AC_DIG3_KAE; | |
| snd_hda_codec_write(codec, per_pin->cvt_nid, 0, AC_VERB_SET_DIGI_CONVERT_3, param); | |
| } | |
| static void i915_set_silent_stream(struct hda_codec *codec, | |
| struct hdmi_spec_per_pin *per_pin, | |
| bool enable) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| switch (spec->silent_stream_type) { | |
| case SILENT_STREAM_KAE: | |
| if (enable) { | |
| silent_stream_enable_i915(codec, per_pin); | |
| silent_stream_set_kae(codec, per_pin, true); | |
| } else { | |
| silent_stream_set_kae(codec, per_pin, false); | |
| } | |
| break; | |
| case SILENT_STREAM_I915: | |
| if (enable) { | |
| silent_stream_enable_i915(codec, per_pin); | |
| snd_hda_power_up_pm(codec); | |
| } else { | |
| /* release ref taken in silent_stream_enable() */ | |
| snd_hda_power_down_pm(codec); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void haswell_verify_D0(struct hda_codec *codec, | |
| hda_nid_t cvt_nid, hda_nid_t nid) | |
| { | |
| int pwr; | |
| /* For Haswell, the converter 1/2 may keep in D3 state after bootup, | |
| * thus pins could only choose converter 0 for use. Make sure the | |
| * converters are in correct power state | |
| */ | |
| if (!snd_hda_check_power_state(codec, cvt_nid, AC_PWRST_D0)) | |
| snd_hda_codec_write(codec, cvt_nid, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D0); | |
| if (!snd_hda_check_power_state(codec, nid, AC_PWRST_D0)) { | |
| snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, | |
| AC_PWRST_D0); | |
| msleep(40); | |
| pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0); | |
| pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT; | |
| codec_dbg(codec, "Haswell HDMI audio: Power for NID 0x%x is now D%d\n", nid, pwr); | |
| } | |
| } | |
| /* Assure the pin select the right convetor */ | |
| static void intel_verify_pin_cvt_connect(struct hda_codec *codec, | |
| struct hdmi_spec_per_pin *per_pin) | |
| { | |
| hda_nid_t pin_nid = per_pin->pin_nid; | |
| int mux_idx, curr; | |
| mux_idx = per_pin->mux_idx; | |
| curr = snd_hda_codec_read(codec, pin_nid, 0, | |
| AC_VERB_GET_CONNECT_SEL, 0); | |
| if (curr != mux_idx) | |
| snd_hda_codec_write_cache(codec, pin_nid, 0, | |
| AC_VERB_SET_CONNECT_SEL, | |
| mux_idx); | |
| } | |
| /* get the mux index for the converter of the pins | |
| * converter's mux index is the same for all pins on Intel platform | |
| */ | |
| static int intel_cvt_id_to_mux_idx(struct hdmi_spec *spec, | |
| hda_nid_t cvt_nid) | |
| { | |
| int i; | |
| for (i = 0; i < spec->num_cvts; i++) | |
| if (spec->cvt_nids[i] == cvt_nid) | |
| return i; | |
| return -EINVAL; | |
| } | |
| /* Intel HDMI workaround to fix audio routing issue: | |
| * For some Intel display codecs, pins share the same connection list. | |
| * So a conveter can be selected by multiple pins and playback on any of these | |
| * pins will generate sound on the external display, because audio flows from | |
| * the same converter to the display pipeline. Also muting one pin may make | |
| * other pins have no sound output. | |
| * So this function assures that an assigned converter for a pin is not selected | |
| * by any other pins. | |
| */ | |
| static void intel_not_share_assigned_cvt(struct hda_codec *codec, | |
| hda_nid_t pin_nid, | |
| int dev_id, int mux_idx) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| hda_nid_t nid; | |
| int cvt_idx, curr; | |
| struct hdmi_spec_per_cvt *per_cvt; | |
| struct hdmi_spec_per_pin *per_pin; | |
| int pin_idx; | |
| /* configure the pins connections */ | |
| for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { | |
| int dev_id_saved; | |
| int dev_num; | |
| per_pin = get_pin(spec, pin_idx); | |
| /* | |
| * pin not connected to monitor | |
| * no need to operate on it | |
| */ | |
| if (!per_pin->pcm) | |
| continue; | |
| if ((per_pin->pin_nid == pin_nid) && | |
| (per_pin->dev_id == dev_id)) | |
| continue; | |
| /* | |
| * if per_pin->dev_id >= dev_num, | |
| * snd_hda_get_dev_select() will fail, | |
| * and the following operation is unpredictable. | |
| * So skip this situation. | |
| */ | |
| dev_num = snd_hda_get_num_devices(codec, per_pin->pin_nid) + 1; | |
| if (per_pin->dev_id >= dev_num) | |
| continue; | |
| nid = per_pin->pin_nid; | |
| /* | |
| * Calling this function should not impact | |
| * on the device entry selection | |
| * So let's save the dev id for each pin, | |
| * and restore it when return | |
| */ | |
| dev_id_saved = snd_hda_get_dev_select(codec, nid); | |
| snd_hda_set_dev_select(codec, nid, per_pin->dev_id); | |
| curr = snd_hda_codec_read(codec, nid, 0, | |
| AC_VERB_GET_CONNECT_SEL, 0); | |
| if (curr != mux_idx) { | |
| snd_hda_set_dev_select(codec, nid, dev_id_saved); | |
| continue; | |
| } | |
| /* choose an unassigned converter. The conveters in the | |
| * connection list are in the same order as in the codec. | |
| */ | |
| for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) { | |
| per_cvt = get_cvt(spec, cvt_idx); | |
| if (!per_cvt->assigned) { | |
| codec_dbg(codec, | |
| "choose cvt %d for pin NID 0x%x\n", | |
| cvt_idx, nid); | |
| snd_hda_codec_write_cache(codec, nid, 0, | |
| AC_VERB_SET_CONNECT_SEL, | |
| cvt_idx); | |
| break; | |
| } | |
| } | |
| snd_hda_set_dev_select(codec, nid, dev_id_saved); | |
| } | |
| } | |
| /* A wrapper of intel_not_share_asigned_cvt() */ | |
| static void intel_not_share_assigned_cvt_nid(struct hda_codec *codec, | |
| hda_nid_t pin_nid, int dev_id, hda_nid_t cvt_nid) | |
| { | |
| int mux_idx; | |
| struct hdmi_spec *spec = codec->spec; | |
| /* On Intel platform, the mapping of converter nid to | |
| * mux index of the pins are always the same. | |
| * The pin nid may be 0, this means all pins will not | |
| * share the converter. | |
| */ | |
| mux_idx = intel_cvt_id_to_mux_idx(spec, cvt_nid); | |
| if (mux_idx >= 0) | |
| intel_not_share_assigned_cvt(codec, pin_nid, dev_id, mux_idx); | |
| } | |
| /* | |
| * prepare ops override for HSW+ | |
| * | |
| * Disable keep-alive before the converter format and audio infoframe are | |
| * reprogrammed by the PCM prepare sequence. Changing the audio format (e.g. | |
| * the channel count when switching to multichannel PCM) while a keep-alive | |
| * stream is active is not safe, so release keep-alive here, early in the | |
| * sequence. It is re-enabled once the new stream has been set up, in | |
| * i915_hsw_setup_stream(). | |
| */ | |
| static void i915_hsw_prepare(struct hda_codec *codec, | |
| struct hdmi_spec_per_pin *per_pin) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin->silent_stream) { | |
| silent_stream_set_kae(codec, per_pin, false); | |
| /* wait for pending transfers in codec to clear */ | |
| usleep_range(100, 200); | |
| } | |
| } | |
| /* setup_stream ops override for HSW+ */ | |
| static int i915_hsw_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, | |
| hda_nid_t pin_nid, int dev_id, u32 stream_tag, | |
| int format) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| int pin_idx = pin_id_to_pin_index(codec, pin_nid, dev_id); | |
| struct hdmi_spec_per_pin *per_pin; | |
| int res; | |
| if (pin_idx < 0) | |
| per_pin = NULL; | |
| else | |
| per_pin = get_pin(spec, pin_idx); | |
| haswell_verify_D0(codec, cvt_nid, pin_nid); | |
| res = snd_hda_hdmi_setup_stream(codec, cvt_nid, pin_nid, dev_id, | |
| stream_tag, format); | |
| /* | |
| * Keep-alive was disabled in i915_hsw_prepare(), re-enable it now. | |
| * The pin lookup above resolves to the same per_pin that prepare | |
| * used (pin_nid comes from that per_pin), so this stays balanced; a | |
| * NULL per_pin only occurs on a lookup failure that also implies no | |
| * active keep-alive stream to restore. | |
| */ | |
| if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin && per_pin->silent_stream) { | |
| usleep_range(100, 200); | |
| silent_stream_set_kae(codec, per_pin, true); | |
| } | |
| return res; | |
| } | |
| /* pin_cvt_fixup ops override for HSW+ and VLV+ */ | |
| static void i915_pin_cvt_fixup(struct hda_codec *codec, | |
| struct hdmi_spec_per_pin *per_pin, | |
| hda_nid_t cvt_nid) | |
| { | |
| if (per_pin) { | |
| haswell_verify_D0(codec, per_pin->cvt_nid, per_pin->pin_nid); | |
| snd_hda_set_dev_select(codec, per_pin->pin_nid, | |
| per_pin->dev_id); | |
| intel_verify_pin_cvt_connect(codec, per_pin); | |
| intel_not_share_assigned_cvt(codec, per_pin->pin_nid, | |
| per_pin->dev_id, per_pin->mux_idx); | |
| } else { | |
| intel_not_share_assigned_cvt_nid(codec, 0, 0, cvt_nid); | |
| } | |
| } | |
| static int i915_hdmi_suspend(struct hda_codec *codec) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| bool silent_streams = false; | |
| int pin_idx, res; | |
| res = snd_hda_hdmi_generic_suspend(codec); | |
| if (spec->silent_stream_type != SILENT_STREAM_KAE) | |
| return res; | |
| for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { | |
| struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); | |
| if (per_pin->silent_stream) { | |
| silent_streams = true; | |
| break; | |
| } | |
| } | |
| if (silent_streams) { | |
| /* | |
| * stream-id should remain programmed when codec goes | |
| * to runtime suspend | |
| */ | |
| codec->no_stream_clean_at_suspend = 1; | |
| /* | |
| * the system might go to S3, in which case keep-alive | |
| * must be reprogrammed upon resume | |
| */ | |
| codec->forced_resume = 1; | |
| codec_dbg(codec, "HDMI: KAE active at suspend\n"); | |
| } else { | |
| codec->no_stream_clean_at_suspend = 0; | |
| codec->forced_resume = 0; | |
| } | |
| return res; | |
| } | |
| static int i915_hdmi_resume(struct hda_codec *codec) | |
| { | |
| struct hdmi_spec *spec = codec->spec; | |
| int pin_idx, res; | |
| res = snd_hda_hdmi_generic_resume(codec); | |
| if (spec->silent_stream_type != SILENT_STREAM_KAE) | |
| return res; | |
| /* KAE not programmed at suspend, nothing to do here */ | |
| if (!codec->no_stream_clean_at_suspend) | |
| return res; | |
| for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { | |
| struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); | |
| /* | |
| * If system was in suspend with monitor connected, | |
| * the codec setting may have been lost. Re-enable | |
| * keep-alive. | |
| */ | |
| if (per_pin->silent_stream) { | |
| unsigned int param; | |
| param = snd_hda_codec_read(codec, per_pin->cvt_nid, 0, | |
| AC_VERB_GET_CONV, 0); | |
| if (!param) { | |
| codec_dbg(codec, "HDMI: KAE: restore stream id\n"); | |
| silent_stream_enable_i915(codec, per_pin); | |
| } | |
| param = snd_hda_codec_read(codec, per_pin->cvt_nid, 0, | |
| AC_VERB_GET_DIGI_CONVERT_1, 0); | |
| if (!(param & (AC_DIG3_KAE << 16))) { | |
| codec_dbg(codec, "HDMI: KAE: restore DIG3_KAE\n"); | |
| silent_stream_set_kae(codec, per_pin, true); | |
| } | |
| } | |
| } | |
| return res; | |
| } | |
| /* precondition and allocation for Intel codecs */ | |
| static int alloc_intel_hdmi(struct hda_codec *codec) | |
| { | |
| /* requires i915 binding */ | |
| if (!codec->bus->core.audio_component) { | |
| codec_info(codec, "No i915 binding for Intel HDMI/DP codec\n"); | |
| /* set probe_id here to prevent generic fallback binding */ | |
| codec->probe_id = HDA_CODEC_ID_SKIP_PROBE; | |
| return -ENODEV; | |
| } | |
| return snd_hda_hdmi_generic_alloc(codec); | |
| } | |
| /* parse and post-process for Intel codecs */ | |
| static int parse_intel_hdmi(struct hda_codec *codec) | |
| { | |
| int err, retries = 3; | |
| do { | |
| err = snd_hda_hdmi_parse_codec(codec); | |
| } while (err < 0 && retries--); | |
| if (err < 0) | |
| return err; | |
| snd_hda_hdmi_generic_init_per_pins(codec); | |
| register_i915_notifier(codec); | |
| return 0; | |
| } | |
| /* Intel Haswell and onwards; audio component with eld notifier */ | |
| static int intel_hsw_common_init(struct hda_codec *codec, hda_nid_t vendor_nid, | |
| const int *port_map, int port_num, int dev_num, | |
| bool send_silent_stream) | |
| { | |
| struct hdmi_spec *spec; | |
| spec = codec->spec; | |
| codec->dp_mst = true; | |
| spec->vendor_nid = vendor_nid; | |
| spec->port_map = port_map; | |
| spec->port_num = port_num; | |
| spec->intel_hsw_fixup = true; | |
| spec->dev_num = dev_num; | |
| intel_haswell_enable_all_pins(codec, true); | |
| intel_haswell_fixup_enable_dp12(codec); | |
| codec->display_power_control = 1; | |
| codec->depop_delay = 0; | |
| codec->auto_runtime_pm = 1; | |
| spec->ops.prepare = i915_hsw_prepare; | |
| spec->ops.setup_stream = i915_hsw_setup_stream; | |
| spec->ops.pin_cvt_fixup = i915_pin_cvt_fixup; | |
| spec->ops.silent_stream = i915_set_silent_stream; | |
| /* | |
| * Enable silent stream feature, if it is enabled via | |
| * module param or Kconfig option | |
| */ | |
| if (send_silent_stream) | |
| spec->silent_stream_type = SILENT_STREAM_I915; | |
| return parse_intel_hdmi(codec); | |
| } | |
| static int probe_i915_hsw_hdmi(struct hda_codec *codec) | |
| { | |
| return intel_hsw_common_init(codec, 0x08, NULL, 0, 3, | |
| enable_silent_stream); | |
| } | |
| static int probe_i915_glk_hdmi(struct hda_codec *codec) | |
| { | |
| /* | |
| * Silent stream calls audio component .get_power() from | |
| * .pin_eld_notify(). On GLK this will deadlock in i915 due | |
| * to the audio vs. CDCLK workaround. | |
| */ | |
| return intel_hsw_common_init(codec, 0x0b, NULL, 0, 3, false); | |
| } | |
| static int probe_i915_icl_hdmi(struct hda_codec *codec) | |
| { | |
| /* | |
| * pin to port mapping table where the value indicate the pin number and | |
| * the index indicate the port number. | |
| */ | |
| static const int map[] = {0x0, 0x4, 0x6, 0x8, 0xa, 0xb}; | |
| return intel_hsw_common_init(codec, 0x02, map, ARRAY_SIZE(map), 3, | |
| enable_silent_stream); | |
| } | |
| static int probe_i915_tgl_hdmi(struct hda_codec *codec) | |
| { | |
| /* | |
| * pin to port mapping table where the value indicate the pin number and | |
| * the index indicate the port number. | |
| */ | |
| static const int map[] = {0x4, 0x6, 0x8, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf}; | |
| return intel_hsw_common_init(codec, 0x02, map, ARRAY_SIZE(map), 4, | |
| enable_silent_stream); | |
| } | |
| static int probe_i915_adlp_hdmi(struct hda_codec *codec) | |
| { | |
| struct hdmi_spec *spec; | |
| int res; | |
| res = probe_i915_tgl_hdmi(codec); | |
| if (!res) { | |
| spec = codec->spec; | |
| if (spec->silent_stream_type) | |
| spec->silent_stream_type = SILENT_STREAM_KAE; | |
| } | |
| return res; | |
| } | |
| /* Intel Baytrail and Braswell; with eld notifier */ | |
| static int probe_i915_byt_hdmi(struct hda_codec *codec) | |
| { | |
| struct hdmi_spec *spec; | |
| spec = codec->spec; | |
| /* For Valleyview/Cherryview, only the display codec is in the display | |
| * power well and can use link_power ops to request/release the power. | |
| */ | |
| codec->display_power_control = 1; | |
| codec->depop_delay = 0; | |
| codec->auto_runtime_pm = 1; | |
| spec->ops.pin_cvt_fixup = i915_pin_cvt_fixup; | |
| return parse_intel_hdmi(codec); | |
| } | |
| /* Intel IronLake, SandyBridge and IvyBridge; with eld notifier */ | |
| static int probe_i915_cpt_hdmi(struct hda_codec *codec) | |
| { | |
| return parse_intel_hdmi(codec); | |
| } | |
| /* | |
| * common driver probe | |
| */ | |
| static int intelhdmi_probe(struct hda_codec *codec, const struct hda_device_id *id) | |
| { | |
| int err; | |
| err = alloc_intel_hdmi(codec); | |
| if (err < 0) | |
| return err; | |
| switch (id->driver_data) { | |
| case MODEL_HSW: | |
| err = probe_i915_hsw_hdmi(codec); | |
| break; | |
| case MODEL_GLK: | |
| err = probe_i915_glk_hdmi(codec); | |
| break; | |
| case MODEL_ICL: | |
| err = probe_i915_icl_hdmi(codec); | |
| break; | |
| case MODEL_TGL: | |
| err = probe_i915_tgl_hdmi(codec); | |
| break; | |
| case MODEL_ADLP: | |
| err = probe_i915_adlp_hdmi(codec); | |
| break; | |
| case MODEL_BYT: | |
| err = probe_i915_byt_hdmi(codec); | |
| break; | |
| case MODEL_CPT: | |
| err = probe_i915_cpt_hdmi(codec); | |
| break; | |
| default: | |
| err = -EINVAL; | |
| break; | |
| } | |
| if (err < 0) { | |
| snd_hda_hdmi_generic_spec_free(codec); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static const struct hda_codec_ops intelhdmi_codec_ops = { | |
| .probe = intelhdmi_probe, | |
| .remove = snd_hda_hdmi_generic_remove, | |
| .init = snd_hda_hdmi_generic_init, | |
| .build_pcms = snd_hda_hdmi_generic_build_pcms, | |
| .build_controls = snd_hda_hdmi_generic_build_controls, | |
| .unsol_event = snd_hda_hdmi_generic_unsol_event, | |
| .suspend = i915_hdmi_suspend, | |
| .resume = i915_hdmi_resume, | |
| .set_power_state = haswell_set_power_state, | |
| }; | |
| /* | |
| * driver entries | |
| */ | |
| static const struct hda_device_id snd_hda_id_intelhdmi[] = { | |
| HDA_CODEC_ID_MODEL(0x80860054, "IbexPeak HDMI", MODEL_CPT), | |
| HDA_CODEC_ID_MODEL(0x80862800, "Geminilake HDMI", MODEL_GLK), | |
| HDA_CODEC_ID_MODEL(0x80862804, "IbexPeak HDMI", MODEL_CPT), | |
| HDA_CODEC_ID_MODEL(0x80862805, "CougarPoint HDMI", MODEL_CPT), | |
| HDA_CODEC_ID_MODEL(0x80862806, "PantherPoint HDMI", MODEL_CPT), | |
| HDA_CODEC_ID_MODEL(0x80862807, "Haswell HDMI", MODEL_HSW), | |
| HDA_CODEC_ID_MODEL(0x80862808, "Broadwell HDMI", MODEL_HSW), | |
| HDA_CODEC_ID_MODEL(0x80862809, "Skylake HDMI", MODEL_HSW), | |
| HDA_CODEC_ID_MODEL(0x8086280a, "Broxton HDMI", MODEL_HSW), | |
| HDA_CODEC_ID_MODEL(0x8086280b, "Kabylake HDMI", MODEL_HSW), | |
| HDA_CODEC_ID_MODEL(0x8086280c, "Cannonlake HDMI", MODEL_GLK), | |
| HDA_CODEC_ID_MODEL(0x8086280d, "Geminilake HDMI", MODEL_GLK), | |
| HDA_CODEC_ID_MODEL(0x8086280f, "Icelake HDMI", MODEL_ICL), | |
| HDA_CODEC_ID_MODEL(0x80862812, "Tigerlake HDMI", MODEL_TGL), | |
| HDA_CODEC_ID_MODEL(0x80862814, "DG1 HDMI", MODEL_TGL), | |
| HDA_CODEC_ID_MODEL(0x80862815, "Alderlake HDMI", MODEL_TGL), | |
| HDA_CODEC_ID_MODEL(0x80862816, "Rocketlake HDMI", MODEL_TGL), | |
| HDA_CODEC_ID_MODEL(0x80862818, "Raptorlake HDMI", MODEL_TGL), | |
| HDA_CODEC_ID_MODEL(0x80862819, "DG2 HDMI", MODEL_TGL), | |
| HDA_CODEC_ID_MODEL(0x8086281a, "Jasperlake HDMI", MODEL_ICL), | |
| HDA_CODEC_ID_MODEL(0x8086281b, "Elkhartlake HDMI", MODEL_ICL), | |
| HDA_CODEC_ID_MODEL(0x8086281c, "Alderlake-P HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x8086281d, "Meteor Lake HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x8086281e, "Battlemage HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x8086281f, "Raptor Lake P HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x80862820, "Lunar Lake HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x80862822, "Panther Lake HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x80862823, "Wildcat Lake HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x80862824, "Nova Lake HDMI", MODEL_ADLP), | |
| HDA_CODEC_ID_MODEL(0x80862882, "Valleyview2 HDMI", MODEL_BYT), | |
| HDA_CODEC_ID_MODEL(0x80862883, "Braswell HDMI", MODEL_BYT), | |
| {} /* terminator */ | |
| }; | |
| MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_intelhdmi); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Intel HDMI HD-audio codec"); | |
| MODULE_IMPORT_NS("SND_HDA_CODEC_HDMI"); | |
| static struct hda_codec_driver intelhdmi_driver = { | |
| .id = snd_hda_id_intelhdmi, | |
| .ops = &intelhdmi_codec_ops, | |
| }; | |
| module_hda_codec_driver(intelhdmi_driver); |