| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (c) by Uros Bizjak <uros@kss-loka.si> | |
| * | |
| * Routines for OPL2/OPL3/OPL4 control | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/nospec.h> | |
| #include <sound/opl3.h> | |
| #include <sound/asound_fm.h> | |
| #include "opl3_voice.h" | |
| #if IS_ENABLED(CONFIG_SND_SEQUENCER) | |
| #define OPL3_SUPPORT_SYNTH | |
| #endif | |
| /* | |
| * There is 18 possible 2 OP voices | |
| * (9 in the left and 9 in the right). | |
| * The first OP is the modulator and 2nd is the carrier. | |
| * | |
| * The first three voices in the both sides may be connected | |
| * with another voice to a 4 OP voice. For example voice 0 | |
| * can be connected with voice 3. The operators of voice 3 are | |
| * used as operators 3 and 4 of the new 4 OP voice. | |
| * In this case the 2 OP voice number 0 is the 'first half' and | |
| * voice 3 is the second. | |
| */ | |
| /* | |
| * Register offset table for OPL2/3 voices, | |
| * OPL2 / one OPL3 register array side only | |
| */ | |
| char snd_opl3_regmap[MAX_OPL2_VOICES][4] = | |
| { | |
| /* OP1 OP2 OP3 OP4 */ | |
| /* ------------------------ */ | |
| { 0x00, 0x03, 0x08, 0x0b }, | |
| { 0x01, 0x04, 0x09, 0x0c }, | |
| { 0x02, 0x05, 0x0a, 0x0d }, | |
| { 0x08, 0x0b, 0x00, 0x00 }, | |
| { 0x09, 0x0c, 0x00, 0x00 }, | |
| { 0x0a, 0x0d, 0x00, 0x00 }, | |
| { 0x10, 0x13, 0x00, 0x00 }, /* used by percussive voices */ | |
| { 0x11, 0x14, 0x00, 0x00 }, /* if the percussive mode */ | |
| { 0x12, 0x15, 0x00, 0x00 } /* is selected (only left reg block) */ | |
| }; | |
| EXPORT_SYMBOL(snd_opl3_regmap); | |
| /* | |
| * prototypes | |
| */ | |
| static int snd_opl3_play_note(struct snd_opl3 * opl3, struct snd_dm_fm_note * note); | |
| static int snd_opl3_set_voice(struct snd_opl3 * opl3, struct snd_dm_fm_voice * voice); | |
| static int snd_opl3_set_params(struct snd_opl3 * opl3, struct snd_dm_fm_params * params); | |
| static int snd_opl3_set_mode(struct snd_opl3 * opl3, int mode); | |
| static int snd_opl3_set_connection(struct snd_opl3 * opl3, int connection); | |
| /* ------------------------------ */ | |
| /* | |
| * open the device exclusively | |
| */ | |
| int snd_opl3_open(struct snd_hwdep * hw, struct file *file) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * ioctl for hwdep device: | |
| */ | |
| int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct snd_opl3 *opl3 = hw->private_data; | |
| void __user *argp = (void __user *)arg; | |
| if (snd_BUG_ON(!opl3)) | |
| return -EINVAL; | |
| switch (cmd) { | |
| /* get information */ | |
| case SNDRV_DM_FM_IOCTL_INFO: | |
| { | |
| struct snd_dm_fm_info info; | |
| memset(&info, 0, sizeof(info)); | |
| info.fm_mode = opl3->fm_mode; | |
| info.rhythm = opl3->rhythm; | |
| if (copy_to_user(argp, &info, sizeof(struct snd_dm_fm_info))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case SNDRV_DM_FM_IOCTL_RESET: | |
| #ifdef CONFIG_SND_OSSEMUL | |
| case SNDRV_DM_FM_OSS_IOCTL_RESET: | |
| #endif | |
| snd_opl3_reset(opl3); | |
| return 0; | |
| case SNDRV_DM_FM_IOCTL_PLAY_NOTE: | |
| #ifdef CONFIG_SND_OSSEMUL | |
| case SNDRV_DM_FM_OSS_IOCTL_PLAY_NOTE: | |
| #endif | |
| { | |
| struct snd_dm_fm_note note; | |
| if (copy_from_user(¬e, argp, sizeof(struct snd_dm_fm_note))) | |
| return -EFAULT; | |
| return snd_opl3_play_note(opl3, ¬e); | |
| } | |
| case SNDRV_DM_FM_IOCTL_SET_VOICE: | |
| #ifdef CONFIG_SND_OSSEMUL | |
| case SNDRV_DM_FM_OSS_IOCTL_SET_VOICE: | |
| #endif | |
| { | |
| struct snd_dm_fm_voice voice; | |
| if (copy_from_user(&voice, argp, sizeof(struct snd_dm_fm_voice))) | |
| return -EFAULT; | |
| return snd_opl3_set_voice(opl3, &voice); | |
| } | |
| case SNDRV_DM_FM_IOCTL_SET_PARAMS: | |
| #ifdef CONFIG_SND_OSSEMUL | |
| case SNDRV_DM_FM_OSS_IOCTL_SET_PARAMS: | |
| #endif | |
| { | |
| struct snd_dm_fm_params params; | |
| if (copy_from_user(¶ms, argp, sizeof(struct snd_dm_fm_params))) | |
| return -EFAULT; | |
| return snd_opl3_set_params(opl3, ¶ms); | |
| } | |
| case SNDRV_DM_FM_IOCTL_SET_MODE: | |
| #ifdef CONFIG_SND_OSSEMUL | |
| case SNDRV_DM_FM_OSS_IOCTL_SET_MODE: | |
| #endif | |
| return snd_opl3_set_mode(opl3, (int) arg); | |
| case SNDRV_DM_FM_IOCTL_SET_CONNECTION: | |
| #ifdef CONFIG_SND_OSSEMUL | |
| case SNDRV_DM_FM_OSS_IOCTL_SET_OPL: | |
| #endif | |
| return snd_opl3_set_connection(opl3, (int) arg); | |
| #ifdef OPL3_SUPPORT_SYNTH | |
| case SNDRV_DM_FM_IOCTL_CLEAR_PATCHES: | |
| snd_opl3_clear_patches(opl3); | |
| return 0; | |
| #endif | |
| default: | |
| dev_dbg(opl3->card->dev, "unknown IOCTL: 0x%x\n", cmd); | |
| } | |
| return -ENOTTY; | |
| } | |
| /* | |
| * close the device | |
| */ | |
| int snd_opl3_release(struct snd_hwdep * hw, struct file *file) | |
| { | |
| struct snd_opl3 *opl3 = hw->private_data; | |
| snd_opl3_reset(opl3); | |
| return 0; | |
| } | |
| #ifdef OPL3_SUPPORT_SYNTH | |
| /* | |
| * write the device - load patches | |
| */ | |
| long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, | |
| loff_t *offset) | |
| { | |
| struct snd_opl3 *opl3 = hw->private_data; | |
| long result = 0; | |
| int err = 0; | |
| struct sbi_patch inst; | |
| while (count >= sizeof(inst)) { | |
| unsigned char type; | |
| if (copy_from_user(&inst, buf, sizeof(inst))) | |
| return -EFAULT; | |
| if (!memcmp(inst.key, FM_KEY_SBI, 4) || | |
| !memcmp(inst.key, FM_KEY_2OP, 4)) | |
| type = FM_PATCH_OPL2; | |
| else if (!memcmp(inst.key, FM_KEY_4OP, 4)) | |
| type = FM_PATCH_OPL3; | |
| else /* invalid type */ | |
| break; | |
| err = snd_opl3_load_patch(opl3, inst.prog, inst.bank, type, | |
| inst.name, inst.extension, | |
| inst.data); | |
| if (err < 0) | |
| break; | |
| result += sizeof(inst); | |
| count -= sizeof(inst); | |
| } | |
| return result > 0 ? result : err; | |
| } | |
| /* | |
| * Patch management | |
| */ | |
| /* offsets for SBI params */ | |
| #define AM_VIB 0 | |
| #define KSL_LEVEL 2 | |
| #define ATTACK_DECAY 4 | |
| #define SUSTAIN_RELEASE 6 | |
| #define WAVE_SELECT 8 | |
| /* offset for SBI instrument */ | |
| #define CONNECTION 10 | |
| #define OFFSET_4OP 11 | |
| /* | |
| * load a patch, obviously. | |
| * | |
| * loaded on the given program and bank numbers with the given type | |
| * (FM_PATCH_OPLx). | |
| * data is the pointer of SBI record _without_ header (key and name). | |
| * name is the name string of the patch. | |
| * ext is the extension data of 7 bytes long (stored in name of SBI | |
| * data up to offset 25), or NULL to skip. | |
| * return 0 if successful or a negative error code. | |
| */ | |
| int snd_opl3_load_patch(struct snd_opl3 *opl3, | |
| int prog, int bank, int type, | |
| const char *name, | |
| const unsigned char *ext, | |
| const unsigned char *data) | |
| { | |
| struct fm_patch *patch; | |
| int i; | |
| patch = snd_opl3_find_patch(opl3, prog, bank, 1); | |
| if (!patch) | |
| return -ENOMEM; | |
| patch->type = type; | |
| for (i = 0; i < 2; i++) { | |
| patch->inst.op[i].am_vib = data[AM_VIB + i]; | |
| patch->inst.op[i].ksl_level = data[KSL_LEVEL + i]; | |
| patch->inst.op[i].attack_decay = data[ATTACK_DECAY + i]; | |
| patch->inst.op[i].sustain_release = data[SUSTAIN_RELEASE + i]; | |
| patch->inst.op[i].wave_select = data[WAVE_SELECT + i]; | |
| } | |
| patch->inst.feedback_connection[0] = data[CONNECTION]; | |
| if (type == FM_PATCH_OPL3) { | |
| for (i = 0; i < 2; i++) { | |
| patch->inst.op[i+2].am_vib = | |
| data[OFFSET_4OP + AM_VIB + i]; | |
| patch->inst.op[i+2].ksl_level = | |
| data[OFFSET_4OP + KSL_LEVEL + i]; | |
| patch->inst.op[i+2].attack_decay = | |
| data[OFFSET_4OP + ATTACK_DECAY + i]; | |
| patch->inst.op[i+2].sustain_release = | |
| data[OFFSET_4OP + SUSTAIN_RELEASE + i]; | |
| patch->inst.op[i+2].wave_select = | |
| data[OFFSET_4OP + WAVE_SELECT + i]; | |
| } | |
| patch->inst.feedback_connection[1] = | |
| data[OFFSET_4OP + CONNECTION]; | |
| } | |
| if (ext) { | |
| patch->inst.echo_delay = ext[0]; | |
| patch->inst.echo_atten = ext[1]; | |
| patch->inst.chorus_spread = ext[2]; | |
| patch->inst.trnsps = ext[3]; | |
| patch->inst.fix_dur = ext[4]; | |
| patch->inst.modes = ext[5]; | |
| patch->inst.fix_key = ext[6]; | |
| } | |
| if (name) | |
| strscpy(patch->name, name, sizeof(patch->name)); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(snd_opl3_load_patch); | |
| /* | |
| * find a patch with the given program and bank numbers, returns its pointer | |
| * if no matching patch is found and create_patch is set, it creates a | |
| * new patch object. | |
| */ | |
| struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank, | |
| int create_patch) | |
| { | |
| /* pretty dumb hash key */ | |
| unsigned int key = (prog + bank) % OPL3_PATCH_HASH_SIZE; | |
| struct fm_patch *patch; | |
| for (patch = opl3->patch_table[key]; patch; patch = patch->next) { | |
| if (patch->prog == prog && patch->bank == bank) | |
| return patch; | |
| } | |
| if (!create_patch) | |
| return NULL; | |
| patch = kzalloc_obj(*patch); | |
| if (!patch) | |
| return NULL; | |
| patch->prog = prog; | |
| patch->bank = bank; | |
| patch->next = opl3->patch_table[key]; | |
| opl3->patch_table[key] = patch; | |
| return patch; | |
| } | |
| EXPORT_SYMBOL(snd_opl3_find_patch); | |
| /* | |
| * Clear all patches of the given OPL3 instance | |
| */ | |
| void snd_opl3_clear_patches(struct snd_opl3 *opl3) | |
| { | |
| int i; | |
| for (i = 0; i < OPL3_PATCH_HASH_SIZE; i++) { | |
| struct fm_patch *patch, *next; | |
| for (patch = opl3->patch_table[i]; patch; patch = next) { | |
| next = patch->next; | |
| kfree(patch); | |
| } | |
| } | |
| memset(opl3->patch_table, 0, sizeof(opl3->patch_table)); | |
| } | |
| #endif /* OPL3_SUPPORT_SYNTH */ | |
| /* ------------------------------ */ | |
| void snd_opl3_reset(struct snd_opl3 * opl3) | |
| { | |
| unsigned short opl3_reg; | |
| unsigned short reg_side; | |
| unsigned char voice_offset; | |
| int max_voices, i; | |
| max_voices = (opl3->hardware < OPL3_HW_OPL3) ? | |
| MAX_OPL2_VOICES : MAX_OPL3_VOICES; | |
| for (i = 0; i < max_voices; i++) { | |
| /* Get register array side and offset of voice */ | |
| if (i < MAX_OPL2_VOICES) { | |
| /* Left register block for voices 0 .. 8 */ | |
| reg_side = OPL3_LEFT; | |
| voice_offset = i; | |
| } else { | |
| /* Right register block for voices 9 .. 17 */ | |
| reg_side = OPL3_RIGHT; | |
| voice_offset = i - MAX_OPL2_VOICES; | |
| } | |
| opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][0]); | |
| opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 1 volume */ | |
| opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][1]); | |
| opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 2 volume */ | |
| opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); | |
| opl3->command(opl3, opl3_reg, 0x00); /* Note off */ | |
| } | |
| opl3->max_voices = MAX_OPL2_VOICES; | |
| opl3->fm_mode = SNDRV_DM_FM_MODE_OPL2; | |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT); | |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00); /* Melodic mode */ | |
| opl3->rhythm = 0; | |
| } | |
| EXPORT_SYMBOL(snd_opl3_reset); | |
| static int snd_opl3_play_note(struct snd_opl3 * opl3, struct snd_dm_fm_note * note) | |
| { | |
| unsigned short reg_side; | |
| unsigned char voice_offset; | |
| unsigned short opl3_reg; | |
| unsigned char reg_val; | |
| /* Voices 0 - 8 in OPL2 mode */ | |
| /* Voices 0 - 17 in OPL3 mode */ | |
| if (note->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? | |
| MAX_OPL3_VOICES : MAX_OPL2_VOICES)) | |
| return -EINVAL; | |
| /* Get register array side and offset of voice */ | |
| if (note->voice < MAX_OPL2_VOICES) { | |
| /* Left register block for voices 0 .. 8 */ | |
| reg_side = OPL3_LEFT; | |
| voice_offset = note->voice; | |
| } else { | |
| /* Right register block for voices 9 .. 17 */ | |
| reg_side = OPL3_RIGHT; | |
| voice_offset = note->voice - MAX_OPL2_VOICES; | |
| } | |
| /* Set lower 8 bits of note frequency */ | |
| reg_val = (unsigned char) note->fnum; | |
| opl3_reg = reg_side | (OPL3_REG_FNUM_LOW + voice_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| reg_val = 0x00; | |
| /* Set output sound flag */ | |
| if (note->key_on) | |
| reg_val |= OPL3_KEYON_BIT; | |
| /* Set octave */ | |
| reg_val |= (note->octave << 2) & OPL3_BLOCKNUM_MASK; | |
| /* Set higher 2 bits of note frequency */ | |
| reg_val |= (unsigned char) (note->fnum >> 8) & OPL3_FNUM_HIGH_MASK; | |
| /* Set OPL3 KEYON_BLOCK register of requested voice */ | |
| opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| return 0; | |
| } | |
| static int snd_opl3_set_voice(struct snd_opl3 * opl3, struct snd_dm_fm_voice * voice) | |
| { | |
| unsigned short reg_side; | |
| unsigned char op_offset; | |
| unsigned char voice_offset, voice_op; | |
| unsigned short opl3_reg; | |
| unsigned char reg_val; | |
| /* Only operators 1 and 2 */ | |
| if (voice->op > 1) | |
| return -EINVAL; | |
| /* Voices 0 - 8 in OPL2 mode */ | |
| /* Voices 0 - 17 in OPL3 mode */ | |
| if (voice->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? | |
| MAX_OPL3_VOICES : MAX_OPL2_VOICES)) | |
| return -EINVAL; | |
| /* Get register array side and offset of voice */ | |
| if (voice->voice < MAX_OPL2_VOICES) { | |
| /* Left register block for voices 0 .. 8 */ | |
| reg_side = OPL3_LEFT; | |
| voice_offset = voice->voice; | |
| } else { | |
| /* Right register block for voices 9 .. 17 */ | |
| reg_side = OPL3_RIGHT; | |
| voice_offset = voice->voice - MAX_OPL2_VOICES; | |
| } | |
| /* Get register offset of operator */ | |
| voice_offset = array_index_nospec(voice_offset, MAX_OPL2_VOICES); | |
| voice_op = array_index_nospec(voice->op, 4); | |
| op_offset = snd_opl3_regmap[voice_offset][voice_op]; | |
| reg_val = 0x00; | |
| /* Set amplitude modulation (tremolo) effect */ | |
| if (voice->am) | |
| reg_val |= OPL3_TREMOLO_ON; | |
| /* Set vibrato effect */ | |
| if (voice->vibrato) | |
| reg_val |= OPL3_VIBRATO_ON; | |
| /* Set sustaining sound phase */ | |
| if (voice->do_sustain) | |
| reg_val |= OPL3_SUSTAIN_ON; | |
| /* Set keyboard scaling bit */ | |
| if (voice->kbd_scale) | |
| reg_val |= OPL3_KSR; | |
| /* Set harmonic or frequency multiplier */ | |
| reg_val |= voice->harmonic & OPL3_MULTIPLE_MASK; | |
| /* Set OPL3 AM_VIB register of requested voice/operator */ | |
| opl3_reg = reg_side | (OPL3_REG_AM_VIB + op_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| /* Set decreasing volume of higher notes */ | |
| reg_val = (voice->scale_level << 6) & OPL3_KSL_MASK; | |
| /* Set output volume */ | |
| reg_val |= ~voice->volume & OPL3_TOTAL_LEVEL_MASK; | |
| /* Set OPL3 KSL_LEVEL register of requested voice/operator */ | |
| opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + op_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| /* Set attack phase level */ | |
| reg_val = (voice->attack << 4) & OPL3_ATTACK_MASK; | |
| /* Set decay phase level */ | |
| reg_val |= voice->decay & OPL3_DECAY_MASK; | |
| /* Set OPL3 ATTACK_DECAY register of requested voice/operator */ | |
| opl3_reg = reg_side | (OPL3_REG_ATTACK_DECAY + op_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| /* Set sustain phase level */ | |
| reg_val = (voice->sustain << 4) & OPL3_SUSTAIN_MASK; | |
| /* Set release phase level */ | |
| reg_val |= voice->release & OPL3_RELEASE_MASK; | |
| /* Set OPL3 SUSTAIN_RELEASE register of requested voice/operator */ | |
| opl3_reg = reg_side | (OPL3_REG_SUSTAIN_RELEASE + op_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| /* Set inter-operator feedback */ | |
| reg_val = (voice->feedback << 1) & OPL3_FEEDBACK_MASK; | |
| /* Set inter-operator connection */ | |
| if (voice->connection) | |
| reg_val |= OPL3_CONNECTION_BIT; | |
| /* OPL-3 only */ | |
| if (opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) { | |
| if (voice->left) | |
| reg_val |= OPL3_VOICE_TO_LEFT; | |
| if (voice->right) | |
| reg_val |= OPL3_VOICE_TO_RIGHT; | |
| } | |
| /* Feedback/connection bits are applicable to voice */ | |
| opl3_reg = reg_side | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| /* Select waveform */ | |
| reg_val = voice->waveform & OPL3_WAVE_SELECT_MASK; | |
| opl3_reg = reg_side | (OPL3_REG_WAVE_SELECT + op_offset); | |
| opl3->command(opl3, opl3_reg, reg_val); | |
| return 0; | |
| } | |
| static int snd_opl3_set_params(struct snd_opl3 * opl3, struct snd_dm_fm_params * params) | |
| { | |
| unsigned char reg_val; | |
| reg_val = 0x00; | |
| /* Set keyboard split method */ | |
| if (params->kbd_split) | |
| reg_val |= OPL3_KEYBOARD_SPLIT; | |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_KBD_SPLIT, reg_val); | |
| reg_val = 0x00; | |
| /* Set amplitude modulation (tremolo) depth */ | |
| if (params->am_depth) | |
| reg_val |= OPL3_TREMOLO_DEPTH; | |
| /* Set vibrato depth */ | |
| if (params->vib_depth) | |
| reg_val |= OPL3_VIBRATO_DEPTH; | |
| /* Set percussion mode */ | |
| if (params->rhythm) { | |
| reg_val |= OPL3_PERCUSSION_ENABLE; | |
| opl3->rhythm = 1; | |
| } else { | |
| opl3->rhythm = 0; | |
| } | |
| /* Play percussion instruments */ | |
| if (params->bass) | |
| reg_val |= OPL3_BASSDRUM_ON; | |
| if (params->snare) | |
| reg_val |= OPL3_SNAREDRUM_ON; | |
| if (params->tomtom) | |
| reg_val |= OPL3_TOMTOM_ON; | |
| if (params->cymbal) | |
| reg_val |= OPL3_CYMBAL_ON; | |
| if (params->hihat) | |
| reg_val |= OPL3_HIHAT_ON; | |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, reg_val); | |
| return 0; | |
| } | |
| static int snd_opl3_set_mode(struct snd_opl3 * opl3, int mode) | |
| { | |
| if ((mode == SNDRV_DM_FM_MODE_OPL3) && (opl3->hardware < OPL3_HW_OPL3)) | |
| return -EINVAL; | |
| opl3->fm_mode = mode; | |
| if (opl3->hardware >= OPL3_HW_OPL3) | |
| opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, 0x00); /* Clear 4-op connections */ | |
| return 0; | |
| } | |
| static int snd_opl3_set_connection(struct snd_opl3 * opl3, int connection) | |
| { | |
| unsigned char reg_val; | |
| /* OPL-3 only */ | |
| if (opl3->fm_mode != SNDRV_DM_FM_MODE_OPL3) | |
| return -EINVAL; | |
| reg_val = connection & (OPL3_RIGHT_4OP_0 | OPL3_RIGHT_4OP_1 | OPL3_RIGHT_4OP_2 | | |
| OPL3_LEFT_4OP_0 | OPL3_LEFT_4OP_1 | OPL3_LEFT_4OP_2); | |
| /* Set 4-op connections */ | |
| opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, reg_val); | |
| return 0; | |
| } | |