| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Pinctrl / GPIO driver for StarFive JHB100 SoC System-2 domain | |
| * | |
| * Copyright (C) 2024 StarFive Technology Co., Ltd. | |
| * Author: Alex Soo <yuklin.soo@starfivetech.com> | |
| * | |
| */ | |
| #include <linux/platform_device.h> | |
| #include "pinctrl-starfive-jhb100.h" | |
| /* sys2 pad numbers */ | |
| #define PADNUM_SYS2_GPIO_A36 12 | |
| #define PADNUM_SYS2_GPIO_A37 13 | |
| #define PADNUM_SYS2_GPIO_A38 14 | |
| #define PADNUM_SYS2_GPIO_A39 15 | |
| #define PADNUM_SYS2_GPIO_A40 16 | |
| #define PADNUM_SYS2_GPIO_A41 17 | |
| #define PADNUM_SYS2_GPIO_A42 18 | |
| #define PADNUM_SYS2_GPIO_A43 19 | |
| static const struct jhb100_pin_layout_desc jhb100_sys2_pl_desc[] = { | |
| { .pin_start = 0, .pin_cnt = 37, .name = "gpio", .gpio_func_sel = 0 }, | |
| { .pin_start = 37, .pin_cnt = 1, .name = "jtag_tck", .gpio_func_sel = -1 }, | |
| { .pin_start = 38, .pin_cnt = 1, .name = "jtag_tresetn", .gpio_func_sel = -1 }, | |
| { .pin_start = 39, .pin_cnt = 1, .name = "jtag_tmc", .gpio_func_sel = -1 }, | |
| { .pin_start = 40, .pin_cnt = 1, .name = "jtag_tdi", .gpio_func_sel = -1 }, | |
| { .pin_start = 41, .pin_cnt = 1, .name = "jtag_tdo", .gpio_func_sel = -1 }, | |
| { .pin_start = 42, .pin_cnt = 1, .name = "jtag_hpd", .gpio_func_sel = -1 }, | |
| { 0xff }, | |
| }; | |
| static const struct config_reg_layout_desc jhb100_sys2_pinctrl_rl_desc[] = { | |
| { | |
| .pin_start = 0, | |
| .pin_cnt = 37, | |
| .fields[PAD_CFG_DRIVE_STRENGTH_2BIT] = { .shift = 0, .width = 2 }, | |
| .fields[PAD_CFG_INPUT_ENABLE] = { .shift = 2, .width = 1 }, | |
| .fields[PAD_CFG_PULL_DOWN] = { .shift = 3, .width = 1 }, | |
| .fields[PAD_CFG_PULL_UP] = { .shift = 4, .width = 1 }, | |
| .fields[PAD_CFG_SLEW_RATE] = { .shift = 5, .width = 1 }, | |
| .fields[PAD_CFG_SCHMITT_TRIGGER_SELECT] = { .shift = 6, .width = 1 }, | |
| .fields[PAD_CFG_DEBOUNCE_WIDTH] = { .shift = 15, .width = 17 }, | |
| }, | |
| { | |
| .pin_start = 37, | |
| .pin_cnt = 6, | |
| .fields[PAD_CFG_DRIVE_STRENGTH_2BIT] = { .shift = 0, .width = 2 }, | |
| .fields[PAD_CFG_INPUT_ENABLE] = { .shift = 2, .width = 1 }, | |
| .fields[PAD_CFG_PULL_DOWN] = { .shift = 3, .width = 1 }, | |
| .fields[PAD_CFG_PULL_UP] = { .shift = 4, .width = 1 }, | |
| .fields[PAD_CFG_SLEW_RATE] = { .shift = 5, .width = 1 }, | |
| .fields[PAD_CFG_SCHMITT_TRIGGER_SELECT] = { .shift = 6, .width = 1 }, | |
| }, | |
| { 0xff }, | |
| }; | |
| static const struct pinvref_desc pinvref_desc_sys2[] = { | |
| { | |
| /* gpiow */ | |
| .pin_grp = { | |
| PADNUM_SYS2_GPIO_A36, | |
| PADNUM_SYS2_GPIO_A37, | |
| PADNUM_SYS2_GPIO_A38, | |
| PADNUM_SYS2_GPIO_A39 | |
| }, | |
| .num_pins = 4, | |
| .range = BIT(JHB100_PINVREF_1_8V) | BIT(JHB100_PINVREF_3_3V) | |
| }, | |
| { | |
| /* gpiow-inner */ | |
| .pin_grp = { | |
| PADNUM_SYS2_GPIO_A40, | |
| PADNUM_SYS2_GPIO_A41, | |
| PADNUM_SYS2_GPIO_A42, | |
| PADNUM_SYS2_GPIO_A43 | |
| }, | |
| .num_pins = 4, | |
| .range = BIT(JHB100_PINVREF_1_8V) | BIT(JHB100_PINVREF_3_3V) | |
| }, | |
| }; | |
| static const struct starfive_pinctrl_regs jhb100_sys2_pinctrl_regs = { | |
| .vref = { .reg = 0x000, .pv_desc = pinvref_desc_sys2, | |
| .num_pv = ARRAY_SIZE(pinvref_desc_sys2) }, | |
| .func_sel = { .reg = 0x0d4, .width_per_pin = 2 }, | |
| .config = 0x010, | |
| .output = 0x0bc, | |
| .output_en = 0x0c4, | |
| .gpio_status = 0x0cc, | |
| .irq_en = 0x0e0, | |
| .irq_status = 0x0e8, | |
| .irq_clr = 0x0f0, | |
| .irq_trigger = 0x0f8, | |
| .irq_level = 0x100, | |
| .irq_both_edge = 0x108, | |
| .irq_edge = 0x110, | |
| }; | |
| static const struct jhb100_pinctrl_func_maps jhb100_func_maps_sys2[] = { | |
| { .func = "gpio", .val = 0 }, | |
| { .func = "host0_port80", .val = 2 }, | |
| { .func = "host1_port80", .val = 3 }, | |
| { .func = "jtag", .val = 2 }, | |
| { .func = "smbalert", .val = 2 }, | |
| { .func = "uart", .val = 1 }, | |
| }; | |
| static const struct jhb100_pinctrl_domain_info jhb100_sys2_pinctrl_info = { | |
| .name = "jhb100-sys2", | |
| .pl_desc = jhb100_sys2_pl_desc, | |
| .crl_desc = jhb100_sys2_pinctrl_rl_desc, | |
| .regs = &jhb100_sys2_pinctrl_regs, | |
| .fmaps = jhb100_func_maps_sys2, | |
| .num_maps = ARRAY_SIZE(jhb100_func_maps_sys2), | |
| }; | |
| static const struct of_device_id jhb100_sys2_pinctrl_of_match[] = { | |
| { | |
| .compatible = "starfive,jhb100-sys2-pinctrl", | |
| .data = &jhb100_sys2_pinctrl_info, | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, jhb100_sys2_pinctrl_of_match); | |
| static struct platform_driver jhb100_sys2_pinctrl_driver = { | |
| .probe = jhb100_pinctrl_probe, | |
| .driver = { | |
| .name = "starfive-jhb100-sys2-pinctrl", | |
| .of_match_table = jhb100_sys2_pinctrl_of_match, | |
| }, | |
| }; | |
| module_platform_driver(jhb100_sys2_pinctrl_driver); | |
| MODULE_DESCRIPTION("Pinctrl driver for StarFive JHB100 SoC System-2 domain"); | |
| MODULE_AUTHOR("Alex Soo <yuklin.soo@starfivetech.com>"); | |
| MODULE_LICENSE("GPL"); |