| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * (C) 2003 Red Hat, Inc. | |
| * (C) 2004 Dan Brown <dan_brown@ieee.org> | |
| * (C) 2004 Kalev Lember <kalev@smartlink.ee> | |
| * | |
| * Author: David Woodhouse <dwmw2@infradead.org> | |
| * Additional Diskonchip 2000 and Millennium support by Dan Brown <dan_brown@ieee.org> | |
| * Diskonchip Millennium Plus support by Kalev Lember <kalev@smartlink.ee> | |
| * | |
| * Error correction code lifted from the old docecc code | |
| * Author: Fabrice Bellard (fabrice.bellard@netgem.com) | |
| * Copyright (C) 2000 Netgem S.A. | |
| * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@kernel.org> | |
| * | |
| * Interface to generic NAND code for M-Systems DiskOnChip devices | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/delay.h> | |
| #include <linux/rslib.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/rawnand.h> | |
| #include <linux/mtd/doc2000.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <linux/mtd/inftl.h> | |
| #include <linux/module.h> | |
| /* Where to look for the devices? */ | |
| #ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS | |
| #define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0 | |
| #endif | |
| static unsigned long doc_locations[] __initdata = { | |
| #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) | |
| #ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH | |
| 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, | |
| 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, | |
| 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, | |
| 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, | |
| 0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000, | |
| #else | |
| 0xc8000, 0xca000, 0xcc000, 0xce000, | |
| 0xd0000, 0xd2000, 0xd4000, 0xd6000, | |
| 0xd8000, 0xda000, 0xdc000, 0xde000, | |
| 0xe0000, 0xe2000, 0xe4000, 0xe6000, | |
| 0xe8000, 0xea000, 0xec000, 0xee000, | |
| #endif | |
| #endif | |
| }; | |
| static struct mtd_info *doclist = NULL; | |
| struct doc_priv { | |
| struct nand_controller base; | |
| void __iomem *virtadr; | |
| unsigned long physadr; | |
| u_char ChipID; | |
| u_char CDSNControl; | |
| int chips_per_floor; /* The number of chips detected on each floor */ | |
| int curfloor; | |
| int curchip; | |
| int mh0_page; | |
| int mh1_page; | |
| struct rs_control *rs_decoder; | |
| struct mtd_info *nextdoc; | |
| bool supports_32b_reads; | |
| /* Handle the last stage of initialization (BBT scan, partitioning) */ | |
| int (*late_init)(struct mtd_info *mtd); | |
| }; | |
| /* This is the ecc value computed by the HW ecc generator upon writing an empty | |
| page, one with all 0xff for data. */ | |
| static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 }; | |
| #define INFTL_BBT_RESERVED_BLOCKS 4 | |
| #define DoC_is_MillenniumPlus(doc) ((doc)->ChipID == DOC_ChipID_DocMilPlus16 || (doc)->ChipID == DOC_ChipID_DocMilPlus32) | |
| #define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil) | |
| #define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k) | |
| static int debug = 0; | |
| module_param(debug, int, 0); | |
| static int try_dword = 1; | |
| module_param(try_dword, int, 0); | |
| static int no_ecc_failures = 0; | |
| module_param(no_ecc_failures, int, 0); | |
| static int no_autopart = 0; | |
| module_param(no_autopart, int, 0); | |
| static int show_firmware_partition = 0; | |
| module_param(show_firmware_partition, int, 0); | |
| #ifdef CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE | |
| static int inftl_bbt_write = 1; | |
| #else | |
| static int inftl_bbt_write = 0; | |
| #endif | |
| module_param(inftl_bbt_write, int, 0); | |
| static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS; | |
| module_param(doc_config_location, ulong, 0); | |
| MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); | |
| /* Sector size for HW ECC */ | |
| #define SECTOR_SIZE 512 | |
| /* The sector bytes are packed into NB_DATA 10 bit words */ | |
| #define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / 10) | |
| /* Number of roots */ | |
| #define NROOTS 4 | |
| /* First consective root */ | |
| #define FCR 510 | |
| /* Number of symbols */ | |
| #define NN 1023 | |
| /* | |
| * The HW decoder in the DoC ASIC's provides us a error syndrome, | |
| * which we must convert to a standard syndrome usable by the generic | |
| * Reed-Solomon library code. | |
| * | |
| * Fabrice Bellard figured this out in the old docecc code. I added | |
| * some comments, improved a minor bit and converted it to make use | |
| * of the generic Reed-Solomon library. tglx | |
| */ | |
| static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) | |
| { | |
| int i, j, nerr, errpos[8]; | |
| uint8_t parity; | |
| uint16_t ds[4], s[5], tmp, errval[8], syn[4]; | |
| struct rs_codec *cd = rs->codec; | |
| memset(syn, 0, sizeof(syn)); | |
| /* Convert the ecc bytes into words */ | |
| ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8); | |
| ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6); | |
| ds[2] = ((ecc[2] & 0xf0) >> 4) | ((ecc[3] & 0x3f) << 4); | |
| ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2); | |
| parity = ecc[1]; | |
| /* Initialize the syndrome buffer */ | |
| for (i = 0; i < NROOTS; i++) | |
| s[i] = ds[0]; | |
| /* | |
| * Evaluate | |
| * s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0] | |
| * where x = alpha^(FCR + i) | |
| */ | |
| for (j = 1; j < NROOTS; j++) { | |
| if (ds[j] == 0) | |
| continue; | |
| tmp = cd->index_of[ds[j]]; | |
| for (i = 0; i < NROOTS; i++) | |
| s[i] ^= cd->alpha_to[rs_modnn(cd, tmp + (FCR + i) * j)]; | |
| } | |
| /* Calc syn[i] = s[i] / alpha^(v + i) */ | |
| for (i = 0; i < NROOTS; i++) { | |
| if (s[i]) | |
| syn[i] = rs_modnn(cd, cd->index_of[s[i]] + (NN - FCR - i)); | |
| } | |
| /* Call the decoder library */ | |
| nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval); | |
| /* Incorrectable errors ? */ | |
| if (nerr < 0) | |
| return nerr; | |
| /* | |
| * Correct the errors. The bitpositions are a bit of magic, | |
| * but they are given by the design of the de/encoder circuit | |
| * in the DoC ASIC's. | |
| */ | |
| for (i = 0; i < nerr; i++) { | |
| int index, bitpos, pos = 1015 - errpos[i]; | |
| uint8_t val; | |
| if (pos >= NB_DATA && pos < 1019) | |
| continue; | |
| if (pos < NB_DATA) { | |
| /* extract bit position (MSB first) */ | |
| pos = 10 * (NB_DATA - 1 - pos) - 6; | |
| /* now correct the following 10 bits. At most two bytes | |
| can be modified since pos is even */ | |
| index = (pos >> 3) ^ 1; | |
| bitpos = pos & 7; | |
| if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) { | |
| val = (uint8_t) (errval[i] >> (2 + bitpos)); | |
| parity ^= val; | |
| if (index < SECTOR_SIZE) | |
| data[index] ^= val; | |
| } | |
| index = ((pos >> 3) + 1) ^ 1; | |
| bitpos = (bitpos + 10) & 7; | |
| if (bitpos == 0) | |
| bitpos = 8; | |
| if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) { | |
| val = (uint8_t) (errval[i] << (8 - bitpos)); | |
| parity ^= val; | |
| if (index < SECTOR_SIZE) | |
| data[index] ^= val; | |
| } | |
| } | |
| } | |
| /* If the parity is wrong, no rescue possible */ | |
| return parity ? -EBADMSG : nerr; | |
| } | |
| static void DoC_Delay(struct doc_priv *doc, unsigned short cycles) | |
| { | |
| volatile char __always_unused dummy; | |
| int i; | |
| for (i = 0; i < cycles; i++) { | |
| if (DoC_is_Millennium(doc)) | |
| dummy = ReadDOC(doc->virtadr, NOP); | |
| else if (DoC_is_MillenniumPlus(doc)) | |
| dummy = ReadDOC(doc->virtadr, Mplus_NOP); | |
| else | |
| dummy = ReadDOC(doc->virtadr, DOCStatus); | |
| } | |
| } | |
| #define CDSN_CTRL_FR_B_MASK (CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1) | |
| /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ | |
| static int _DoC_WaitReady(struct doc_priv *doc) | |
| { | |
| void __iomem *docptr = doc->virtadr; | |
| unsigned long timeo = jiffies + (HZ * 10); | |
| if (debug) | |
| printk("_DoC_WaitReady...\n"); | |
| /* Out-of-line routine to wait for chip response */ | |
| if (DoC_is_MillenniumPlus(doc)) { | |
| while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) { | |
| if (time_after(jiffies, timeo)) { | |
| printk("_DoC_WaitReady timed out.\n"); | |
| return -EIO; | |
| } | |
| udelay(1); | |
| cond_resched(); | |
| } | |
| } else { | |
| while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { | |
| if (time_after(jiffies, timeo)) { | |
| printk("_DoC_WaitReady timed out.\n"); | |
| return -EIO; | |
| } | |
| udelay(1); | |
| cond_resched(); | |
| } | |
| } | |
| return 0; | |
| } | |
| static inline int DoC_WaitReady(struct doc_priv *doc) | |
| { | |
| void __iomem *docptr = doc->virtadr; | |
| int ret = 0; | |
| if (DoC_is_MillenniumPlus(doc)) { | |
| DoC_Delay(doc, 4); | |
| if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) | |
| /* Call the out-of-line routine to wait */ | |
| ret = _DoC_WaitReady(doc); | |
| } else { | |
| DoC_Delay(doc, 4); | |
| if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) | |
| /* Call the out-of-line routine to wait */ | |
| ret = _DoC_WaitReady(doc); | |
| DoC_Delay(doc, 2); | |
| } | |
| if (debug) | |
| printk("DoC_WaitReady OK\n"); | |
| return ret; | |
| } | |
| static void doc2000_write_byte(struct nand_chip *this, u_char datum) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| if (debug) | |
| printk("write_byte %02x\n", datum); | |
| WriteDOC(datum, docptr, CDSNSlowIO); | |
| WriteDOC(datum, docptr, 2k_CDSN_IO); | |
| } | |
| static void doc2000_writebuf(struct nand_chip *this, const u_char *buf, | |
| int len) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| int i; | |
| if (debug) | |
| printk("writebuf of %d bytes: ", len); | |
| for (i = 0; i < len; i++) { | |
| WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i); | |
| if (debug && i < 16) | |
| printk("%02x ", buf[i]); | |
| } | |
| if (debug) | |
| printk("\n"); | |
| } | |
| static void doc2000_readbuf(struct nand_chip *this, u_char *buf, int len) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| u32 *buf32 = (u32 *)buf; | |
| int i; | |
| if (debug) | |
| printk("readbuf of %d bytes: ", len); | |
| if (!doc->supports_32b_reads || | |
| ((((unsigned long)buf) | len) & 3)) { | |
| for (i = 0; i < len; i++) | |
| buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i); | |
| } else { | |
| for (i = 0; i < len / 4; i++) | |
| buf32[i] = readl(docptr + DoC_2k_CDSN_IO + i); | |
| } | |
| } | |
| /* | |
| * We need our own readid() here because it's called before the NAND chip | |
| * has been initialized, and calling nand_op_readid() would lead to a NULL | |
| * pointer exception when dereferencing the NAND timings. | |
| */ | |
| static void doc200x_readid(struct nand_chip *this, unsigned int cs, u8 *id) | |
| { | |
| u8 addr = 0; | |
| struct nand_op_instr instrs[] = { | |
| NAND_OP_CMD(NAND_CMD_READID, 0), | |
| NAND_OP_ADDR(1, &addr, 50), | |
| NAND_OP_8BIT_DATA_IN(2, id, 0), | |
| }; | |
| struct nand_operation op = NAND_OPERATION(cs, instrs); | |
| if (!id) | |
| op.ninstrs--; | |
| this->controller->ops->exec_op(this, &op, false); | |
| } | |
| static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| uint16_t ret; | |
| u8 id[2]; | |
| doc200x_readid(this, nr, id); | |
| ret = ((u16)id[0] << 8) | id[1]; | |
| if (doc->ChipID == DOC_ChipID_Doc2k && try_dword && !nr) { | |
| /* First chip probe. See if we get same results by 32-bit access */ | |
| union { | |
| uint32_t dword; | |
| uint8_t byte[4]; | |
| } ident; | |
| void __iomem *docptr = doc->virtadr; | |
| doc200x_readid(this, nr, NULL); | |
| ident.dword = readl(docptr + DoC_2k_CDSN_IO); | |
| if (((ident.byte[0] << 8) | ident.byte[1]) == ret) { | |
| pr_info("DiskOnChip 2000 responds to DWORD access\n"); | |
| doc->supports_32b_reads = true; | |
| } | |
| } | |
| return ret; | |
| } | |
| static void __init doc2000_count_chips(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| uint16_t mfrid; | |
| int i; | |
| /* Max 4 chips per floor on DiskOnChip 2000 */ | |
| doc->chips_per_floor = 4; | |
| /* Find out what the first chip is */ | |
| mfrid = doc200x_ident_chip(mtd, 0); | |
| /* Find how many chips in each floor. */ | |
| for (i = 1; i < 4; i++) { | |
| if (doc200x_ident_chip(mtd, i) != mfrid) | |
| break; | |
| } | |
| doc->chips_per_floor = i; | |
| pr_debug("Detected %d chips per floor.\n", i); | |
| } | |
| static void doc2001_write_byte(struct nand_chip *this, u_char datum) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| WriteDOC(datum, docptr, CDSNSlowIO); | |
| WriteDOC(datum, docptr, Mil_CDSN_IO); | |
| WriteDOC(datum, docptr, WritePipeTerm); | |
| } | |
| static void doc2001_writebuf(struct nand_chip *this, const u_char *buf, int len) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| int i; | |
| for (i = 0; i < len; i++) | |
| WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i); | |
| /* Terminate write pipeline */ | |
| WriteDOC(0x00, docptr, WritePipeTerm); | |
| } | |
| static void doc2001_readbuf(struct nand_chip *this, u_char *buf, int len) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| int i; | |
| /* Start read pipeline */ | |
| ReadDOC(docptr, ReadPipeInit); | |
| for (i = 0; i < len - 1; i++) | |
| buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff)); | |
| /* Terminate read pipeline */ | |
| buf[i] = ReadDOC(docptr, LastDataRead); | |
| } | |
| static void doc2001plus_writebuf(struct nand_chip *this, const u_char *buf, int len) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| int i; | |
| if (debug) | |
| printk("writebuf of %d bytes: ", len); | |
| for (i = 0; i < len; i++) { | |
| WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i); | |
| if (debug && i < 16) | |
| printk("%02x ", buf[i]); | |
| } | |
| if (debug) | |
| printk("\n"); | |
| } | |
| static void doc2001plus_readbuf(struct nand_chip *this, u_char *buf, int len) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| int i; | |
| if (debug) | |
| printk("readbuf of %d bytes: ", len); | |
| /* Start read pipeline */ | |
| ReadDOC(docptr, Mplus_ReadPipeInit); | |
| ReadDOC(docptr, Mplus_ReadPipeInit); | |
| for (i = 0; i < len - 2; i++) { | |
| buf[i] = ReadDOC(docptr, Mil_CDSN_IO); | |
| if (debug && i < 16) | |
| printk("%02x ", buf[i]); | |
| } | |
| /* Terminate read pipeline */ | |
| if (len >= 2) { | |
| buf[len - 2] = ReadDOC(docptr, Mplus_LastDataRead); | |
| if (debug && i < 16) | |
| printk("%02x ", buf[len - 2]); | |
| } | |
| buf[len - 1] = ReadDOC(docptr, Mplus_LastDataRead); | |
| if (debug && i < 16) | |
| printk("%02x ", buf[len - 1]); | |
| if (debug) | |
| printk("\n"); | |
| } | |
| static void doc200x_write_control(struct doc_priv *doc, u8 value) | |
| { | |
| WriteDOC(value, doc->virtadr, CDSNControl); | |
| /* 11.4.3 -- 4 NOPs after CSDNControl write */ | |
| DoC_Delay(doc, 4); | |
| } | |
| static void doc200x_exec_instr(struct nand_chip *this, | |
| const struct nand_op_instr *instr) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| unsigned int i; | |
| switch (instr->type) { | |
| case NAND_OP_CMD_INSTR: | |
| doc200x_write_control(doc, CDSN_CTRL_CE | CDSN_CTRL_CLE); | |
| doc2000_write_byte(this, instr->ctx.cmd.opcode); | |
| break; | |
| case NAND_OP_ADDR_INSTR: | |
| doc200x_write_control(doc, CDSN_CTRL_CE | CDSN_CTRL_ALE); | |
| for (i = 0; i < instr->ctx.addr.naddrs; i++) { | |
| u8 addr = instr->ctx.addr.addrs[i]; | |
| if (DoC_is_2000(doc)) | |
| doc2000_write_byte(this, addr); | |
| else | |
| doc2001_write_byte(this, addr); | |
| } | |
| break; | |
| case NAND_OP_DATA_IN_INSTR: | |
| doc200x_write_control(doc, CDSN_CTRL_CE); | |
| if (DoC_is_2000(doc)) | |
| doc2000_readbuf(this, instr->ctx.data.buf.in, | |
| instr->ctx.data.len); | |
| else | |
| doc2001_readbuf(this, instr->ctx.data.buf.in, | |
| instr->ctx.data.len); | |
| break; | |
| case NAND_OP_DATA_OUT_INSTR: | |
| doc200x_write_control(doc, CDSN_CTRL_CE); | |
| if (DoC_is_2000(doc)) | |
| doc2000_writebuf(this, instr->ctx.data.buf.out, | |
| instr->ctx.data.len); | |
| else | |
| doc2001_writebuf(this, instr->ctx.data.buf.out, | |
| instr->ctx.data.len); | |
| break; | |
| case NAND_OP_WAITRDY_INSTR: | |
| DoC_WaitReady(doc); | |
| break; | |
| } | |
| if (instr->delay_ns) | |
| ndelay(instr->delay_ns); | |
| } | |
| static int doc200x_exec_op(struct nand_chip *this, | |
| const struct nand_operation *op, | |
| bool check_only) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| unsigned int i; | |
| if (check_only) | |
| return true; | |
| doc->curchip = op->cs % doc->chips_per_floor; | |
| doc->curfloor = op->cs / doc->chips_per_floor; | |
| WriteDOC(doc->curfloor, doc->virtadr, FloorSelect); | |
| WriteDOC(doc->curchip, doc->virtadr, CDSNDeviceSelect); | |
| /* Assert CE pin */ | |
| doc200x_write_control(doc, CDSN_CTRL_CE); | |
| for (i = 0; i < op->ninstrs; i++) | |
| doc200x_exec_instr(this, &op->instrs[i]); | |
| /* De-assert CE pin */ | |
| doc200x_write_control(doc, 0); | |
| return 0; | |
| } | |
| static void doc2001plus_write_pipe_term(struct doc_priv *doc) | |
| { | |
| WriteDOC(0x00, doc->virtadr, Mplus_WritePipeTerm); | |
| WriteDOC(0x00, doc->virtadr, Mplus_WritePipeTerm); | |
| } | |
| static void doc2001plus_exec_instr(struct nand_chip *this, | |
| const struct nand_op_instr *instr) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| unsigned int i; | |
| switch (instr->type) { | |
| case NAND_OP_CMD_INSTR: | |
| WriteDOC(instr->ctx.cmd.opcode, doc->virtadr, Mplus_FlashCmd); | |
| doc2001plus_write_pipe_term(doc); | |
| break; | |
| case NAND_OP_ADDR_INSTR: | |
| for (i = 0; i < instr->ctx.addr.naddrs; i++) { | |
| u8 addr = instr->ctx.addr.addrs[i]; | |
| WriteDOC(addr, doc->virtadr, Mplus_FlashAddress); | |
| } | |
| doc2001plus_write_pipe_term(doc); | |
| /* deassert ALE */ | |
| WriteDOC(0, doc->virtadr, Mplus_FlashControl); | |
| break; | |
| case NAND_OP_DATA_IN_INSTR: | |
| doc2001plus_readbuf(this, instr->ctx.data.buf.in, | |
| instr->ctx.data.len); | |
| break; | |
| case NAND_OP_DATA_OUT_INSTR: | |
| doc2001plus_writebuf(this, instr->ctx.data.buf.out, | |
| instr->ctx.data.len); | |
| doc2001plus_write_pipe_term(doc); | |
| break; | |
| case NAND_OP_WAITRDY_INSTR: | |
| DoC_WaitReady(doc); | |
| break; | |
| } | |
| if (instr->delay_ns) | |
| ndelay(instr->delay_ns); | |
| } | |
| static int doc2001plus_exec_op(struct nand_chip *this, | |
| const struct nand_operation *op, | |
| bool check_only) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| unsigned int i; | |
| if (check_only) | |
| return true; | |
| doc->curchip = op->cs % doc->chips_per_floor; | |
| doc->curfloor = op->cs / doc->chips_per_floor; | |
| /* Assert ChipEnable and deassert WriteProtect */ | |
| WriteDOC(DOC_FLASH_CE, doc->virtadr, Mplus_FlashSelect); | |
| for (i = 0; i < op->ninstrs; i++) | |
| doc2001plus_exec_instr(this, &op->instrs[i]); | |
| /* De-assert ChipEnable */ | |
| WriteDOC(0, doc->virtadr, Mplus_FlashSelect); | |
| return 0; | |
| } | |
| static void doc200x_enable_hwecc(struct nand_chip *this, int mode) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| /* Prime the ECC engine */ | |
| switch (mode) { | |
| case NAND_ECC_READ: | |
| WriteDOC(DOC_ECC_RESET, docptr, ECCConf); | |
| WriteDOC(DOC_ECC_EN, docptr, ECCConf); | |
| break; | |
| case NAND_ECC_WRITE: | |
| WriteDOC(DOC_ECC_RESET, docptr, ECCConf); | |
| WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); | |
| break; | |
| } | |
| } | |
| static void doc2001plus_enable_hwecc(struct nand_chip *this, int mode) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| /* Prime the ECC engine */ | |
| switch (mode) { | |
| case NAND_ECC_READ: | |
| WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); | |
| WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf); | |
| break; | |
| case NAND_ECC_WRITE: | |
| WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); | |
| WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf); | |
| break; | |
| } | |
| } | |
| /* This code is only called on write */ | |
| static int doc200x_calculate_ecc(struct nand_chip *this, const u_char *dat, | |
| unsigned char *ecc_code) | |
| { | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| int i; | |
| int __always_unused emptymatch = 1; | |
| /* flush the pipeline */ | |
| if (DoC_is_2000(doc)) { | |
| WriteDOC(doc->CDSNControl & ~CDSN_CTRL_FLASH_IO, docptr, CDSNControl); | |
| WriteDOC(0, docptr, 2k_CDSN_IO); | |
| WriteDOC(0, docptr, 2k_CDSN_IO); | |
| WriteDOC(0, docptr, 2k_CDSN_IO); | |
| WriteDOC(doc->CDSNControl, docptr, CDSNControl); | |
| } else if (DoC_is_MillenniumPlus(doc)) { | |
| WriteDOC(0, docptr, Mplus_NOP); | |
| WriteDOC(0, docptr, Mplus_NOP); | |
| WriteDOC(0, docptr, Mplus_NOP); | |
| } else { | |
| WriteDOC(0, docptr, NOP); | |
| WriteDOC(0, docptr, NOP); | |
| WriteDOC(0, docptr, NOP); | |
| } | |
| for (i = 0; i < 6; i++) { | |
| if (DoC_is_MillenniumPlus(doc)) | |
| ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i); | |
| else | |
| ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i); | |
| if (ecc_code[i] != empty_write_ecc[i]) | |
| emptymatch = 0; | |
| } | |
| if (DoC_is_MillenniumPlus(doc)) | |
| WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); | |
| else | |
| WriteDOC(DOC_ECC_DIS, docptr, ECCConf); | |
| #if 0 | |
| /* If emptymatch=1, we might have an all-0xff data buffer. Check. */ | |
| if (emptymatch) { | |
| /* Note: this somewhat expensive test should not be triggered | |
| often. It could be optimized away by examining the data in | |
| the writebuf routine, and remembering the result. */ | |
| for (i = 0; i < 512; i++) { | |
| if (dat[i] == 0xff) | |
| continue; | |
| emptymatch = 0; | |
| break; | |
| } | |
| } | |
| /* If emptymatch still =1, we do have an all-0xff data buffer. | |
| Return all-0xff ecc value instead of the computed one, so | |
| it'll look just like a freshly-erased page. */ | |
| if (emptymatch) | |
| memset(ecc_code, 0xff, 6); | |
| #endif | |
| return 0; | |
| } | |
| static int doc200x_correct_data(struct nand_chip *this, u_char *dat, | |
| u_char *read_ecc, u_char *isnull) | |
| { | |
| int i, ret = 0; | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| void __iomem *docptr = doc->virtadr; | |
| uint8_t calc_ecc[6]; | |
| volatile u_char dummy; | |
| /* flush the pipeline */ | |
| if (DoC_is_2000(doc)) { | |
| dummy = ReadDOC(docptr, 2k_ECCStatus); | |
| dummy = ReadDOC(docptr, 2k_ECCStatus); | |
| dummy = ReadDOC(docptr, 2k_ECCStatus); | |
| } else if (DoC_is_MillenniumPlus(doc)) { | |
| dummy = ReadDOC(docptr, Mplus_ECCConf); | |
| dummy = ReadDOC(docptr, Mplus_ECCConf); | |
| dummy = ReadDOC(docptr, Mplus_ECCConf); | |
| } else { | |
| dummy = ReadDOC(docptr, ECCConf); | |
| dummy = ReadDOC(docptr, ECCConf); | |
| dummy = ReadDOC(docptr, ECCConf); | |
| } | |
| /* Error occurred ? */ | |
| if (dummy & 0x80) { | |
| for (i = 0; i < 6; i++) { | |
| if (DoC_is_MillenniumPlus(doc)) | |
| calc_ecc[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i); | |
| else | |
| calc_ecc[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i); | |
| } | |
| ret = doc_ecc_decode(doc->rs_decoder, dat, calc_ecc); | |
| if (ret > 0) | |
| pr_err("doc200x_correct_data corrected %d errors\n", | |
| ret); | |
| } | |
| if (DoC_is_MillenniumPlus(doc)) | |
| WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); | |
| else | |
| WriteDOC(DOC_ECC_DIS, docptr, ECCConf); | |
| if (no_ecc_failures && mtd_is_eccerr(ret)) { | |
| pr_err("suppressing ECC failure\n"); | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| //u_char mydatabuf[528]; | |
| static int doc200x_ooblayout_ecc(struct mtd_info *mtd, int section, | |
| struct mtd_oob_region *oobregion) | |
| { | |
| if (section) | |
| return -ERANGE; | |
| oobregion->offset = 0; | |
| oobregion->length = 6; | |
| return 0; | |
| } | |
| static int doc200x_ooblayout_free(struct mtd_info *mtd, int section, | |
| struct mtd_oob_region *oobregion) | |
| { | |
| if (section > 1) | |
| return -ERANGE; | |
| /* | |
| * The strange out-of-order free bytes definition is a (possibly | |
| * unneeded) attempt to retain compatibility. It used to read: | |
| * .oobfree = { {8, 8} } | |
| * Since that leaves two bytes unusable, it was changed. But the | |
| * following scheme might affect existing jffs2 installs by moving the | |
| * cleanmarker: | |
| * .oobfree = { {6, 10} } | |
| * jffs2 seems to handle the above gracefully, but the current scheme | |
| * seems safer. The only problem with it is that any code retrieving | |
| * free bytes position must be able to handle out-of-order segments. | |
| */ | |
| if (!section) { | |
| oobregion->offset = 8; | |
| oobregion->length = 8; | |
| } else { | |
| oobregion->offset = 6; | |
| oobregion->length = 2; | |
| } | |
| return 0; | |
| } | |
| static const struct mtd_ooblayout_ops doc200x_ooblayout_ops = { | |
| .ecc = doc200x_ooblayout_ecc, | |
| .free = doc200x_ooblayout_free, | |
| }; | |
| /* Find the (I)NFTL Media Header, and optionally also the mirror media header. | |
| On successful return, buf will contain a copy of the media header for | |
| further processing. id is the string to scan for, and will presumably be | |
| either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media | |
| header. The page #s of the found media headers are placed in mh0_page and | |
| mh1_page in the DOC private structure. */ | |
| static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const char *id, int findmirror) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| unsigned offs; | |
| int ret; | |
| size_t retlen; | |
| for (offs = 0; offs < mtd->size; offs += mtd->erasesize) { | |
| ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf); | |
| if (retlen != mtd->writesize) | |
| continue; | |
| if (ret) { | |
| pr_warn("ECC error scanning DOC at 0x%x\n", offs); | |
| } | |
| if (memcmp(buf, id, 6)) | |
| continue; | |
| pr_info("Found DiskOnChip %s Media Header at 0x%x\n", id, offs); | |
| if (doc->mh0_page == -1) { | |
| doc->mh0_page = offs >> this->page_shift; | |
| if (!findmirror) | |
| return 1; | |
| continue; | |
| } | |
| doc->mh1_page = offs >> this->page_shift; | |
| return 2; | |
| } | |
| if (doc->mh0_page == -1) { | |
| pr_warn("DiskOnChip %s Media Header not found.\n", id); | |
| return 0; | |
| } | |
| /* Only one mediaheader was found. We want buf to contain a | |
| mediaheader on return, so we'll have to re-read the one we found. */ | |
| offs = doc->mh0_page << this->page_shift; | |
| ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf); | |
| if (retlen != mtd->writesize) { | |
| /* Insanity. Give up. */ | |
| pr_err("Read DiskOnChip Media Header once, but can't reread it???\n"); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| struct nand_memory_organization *memorg; | |
| int ret = 0; | |
| u_char *buf; | |
| struct NFTLMediaHeader *mh; | |
| const unsigned psize = 1 << this->page_shift; | |
| int numparts = 0; | |
| unsigned blocks, maxblocks; | |
| int offs, numheaders; | |
| memorg = nanddev_get_memorg(&this->base); | |
| buf = kmalloc(mtd->writesize, GFP_KERNEL); | |
| if (!buf) { | |
| return 0; | |
| } | |
| if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1))) | |
| goto out; | |
| mh = (struct NFTLMediaHeader *)buf; | |
| le16_to_cpus(&mh->NumEraseUnits); | |
| le16_to_cpus(&mh->FirstPhysicalEUN); | |
| le32_to_cpus(&mh->FormattedSize); | |
| pr_info(" DataOrgID = %s\n" | |
| " NumEraseUnits = %d\n" | |
| " FirstPhysicalEUN = %d\n" | |
| " FormattedSize = %d\n" | |
| " UnitSizeFactor = %d\n", | |
| mh->DataOrgID, mh->NumEraseUnits, | |
| mh->FirstPhysicalEUN, mh->FormattedSize, | |
| mh->UnitSizeFactor); | |
| blocks = mtd->size >> this->phys_erase_shift; | |
| maxblocks = min(32768U, mtd->erasesize - psize); | |
| if (mh->UnitSizeFactor == 0x00) { | |
| /* Auto-determine UnitSizeFactor. The constraints are: | |
| - There can be at most 32768 virtual blocks. | |
| - There can be at most (virtual block size - page size) | |
| virtual blocks (because MediaHeader+BBT must fit in 1). | |
| */ | |
| mh->UnitSizeFactor = 0xff; | |
| while (blocks > maxblocks) { | |
| blocks >>= 1; | |
| maxblocks = min(32768U, (maxblocks << 1) + psize); | |
| mh->UnitSizeFactor--; | |
| } | |
| pr_warn("UnitSizeFactor=0x00 detected. Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor); | |
| } | |
| /* NOTE: The lines below modify internal variables of the NAND and MTD | |
| layers; variables with have already been configured by nand_scan. | |
| Unfortunately, we didn't know before this point what these values | |
| should be. Thus, this code is somewhat dependent on the exact | |
| implementation of the NAND layer. */ | |
| if (mh->UnitSizeFactor != 0xff) { | |
| this->bbt_erase_shift += (0xff - mh->UnitSizeFactor); | |
| memorg->pages_per_eraseblock <<= (0xff - mh->UnitSizeFactor); | |
| mtd->erasesize <<= (0xff - mh->UnitSizeFactor); | |
| pr_info("Setting virtual erase size to %d\n", mtd->erasesize); | |
| blocks = mtd->size >> this->bbt_erase_shift; | |
| maxblocks = min(32768U, mtd->erasesize - psize); | |
| } | |
| if (blocks > maxblocks) { | |
| pr_err("UnitSizeFactor of 0x%02x is inconsistent with device size. Aborting.\n", mh->UnitSizeFactor); | |
| goto out; | |
| } | |
| /* Skip past the media headers. */ | |
| offs = max(doc->mh0_page, doc->mh1_page); | |
| offs <<= this->page_shift; | |
| offs += mtd->erasesize; | |
| if (show_firmware_partition == 1) { | |
| parts[0].name = " DiskOnChip Firmware / Media Header partition"; | |
| parts[0].offset = 0; | |
| parts[0].size = offs; | |
| numparts = 1; | |
| } | |
| parts[numparts].name = " DiskOnChip BDTL partition"; | |
| parts[numparts].offset = offs; | |
| parts[numparts].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift; | |
| offs += parts[numparts].size; | |
| numparts++; | |
| if (offs < mtd->size) { | |
| parts[numparts].name = " DiskOnChip Remainder partition"; | |
| parts[numparts].offset = offs; | |
| parts[numparts].size = mtd->size - offs; | |
| numparts++; | |
| } | |
| ret = numparts; | |
| out: | |
| kfree(buf); | |
| return ret; | |
| } | |
| /* This is a stripped-down copy of the code in inftlmount.c */ | |
| static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| int ret = 0; | |
| u_char *buf; | |
| struct INFTLMediaHeader *mh; | |
| struct INFTLPartition *ip; | |
| int numparts = 0; | |
| int blocks; | |
| int vshift, lastvunit = 0; | |
| int i; | |
| int end = mtd->size; | |
| if (inftl_bbt_write) | |
| end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift); | |
| buf = kmalloc(mtd->writesize, GFP_KERNEL); | |
| if (!buf) { | |
| return 0; | |
| } | |
| if (!find_media_headers(mtd, buf, "BNAND", 0)) | |
| goto out; | |
| doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); | |
| mh = (struct INFTLMediaHeader *)buf; | |
| le32_to_cpus(&mh->NoOfBootImageBlocks); | |
| le32_to_cpus(&mh->NoOfBinaryPartitions); | |
| le32_to_cpus(&mh->NoOfBDTLPartitions); | |
| le32_to_cpus(&mh->BlockMultiplierBits); | |
| le32_to_cpus(&mh->FormatFlags); | |
| le32_to_cpus(&mh->PercentUsed); | |
| pr_info(" bootRecordID = %s\n" | |
| " NoOfBootImageBlocks = %d\n" | |
| " NoOfBinaryPartitions = %d\n" | |
| " NoOfBDTLPartitions = %d\n" | |
| " BlockMultiplierBits = %d\n" | |
| " FormatFlgs = %d\n" | |
| " OsakVersion = %d.%d.%d.%d\n" | |
| " PercentUsed = %d\n", | |
| mh->bootRecordID, mh->NoOfBootImageBlocks, | |
| mh->NoOfBinaryPartitions, | |
| mh->NoOfBDTLPartitions, | |
| mh->BlockMultiplierBits, mh->FormatFlags, | |
| ((unsigned char *) &mh->OsakVersion)[0] & 0xf, | |
| ((unsigned char *) &mh->OsakVersion)[1] & 0xf, | |
| ((unsigned char *) &mh->OsakVersion)[2] & 0xf, | |
| ((unsigned char *) &mh->OsakVersion)[3] & 0xf, | |
| mh->PercentUsed); | |
| vshift = this->phys_erase_shift + mh->BlockMultiplierBits; | |
| blocks = mtd->size >> vshift; | |
| if (blocks > 32768) { | |
| pr_err("BlockMultiplierBits=%d is inconsistent with device size. Aborting.\n", mh->BlockMultiplierBits); | |
| goto out; | |
| } | |
| blocks = doc->chips_per_floor << (this->chip_shift - this->phys_erase_shift); | |
| if (inftl_bbt_write && (blocks > mtd->erasesize)) { | |
| pr_err("Writeable BBTs spanning more than one erase block are not yet supported. FIX ME!\n"); | |
| goto out; | |
| } | |
| /* Scan the partitions */ | |
| for (i = 0; (i < 4); i++) { | |
| ip = &(mh->Partitions[i]); | |
| le32_to_cpus(&ip->virtualUnits); | |
| le32_to_cpus(&ip->firstUnit); | |
| le32_to_cpus(&ip->lastUnit); | |
| le32_to_cpus(&ip->flags); | |
| le32_to_cpus(&ip->spareUnits); | |
| le32_to_cpus(&ip->Reserved0); | |
| pr_info(" PARTITION[%d] ->\n" | |
| " virtualUnits = %d\n" | |
| " firstUnit = %d\n" | |
| " lastUnit = %d\n" | |
| " flags = 0x%x\n" | |
| " spareUnits = %d\n", | |
| i, ip->virtualUnits, ip->firstUnit, | |
| ip->lastUnit, ip->flags, | |
| ip->spareUnits); | |
| if ((show_firmware_partition == 1) && | |
| (i == 0) && (ip->firstUnit > 0)) { | |
| parts[0].name = " DiskOnChip IPL / Media Header partition"; | |
| parts[0].offset = 0; | |
| parts[0].size = (uint64_t)mtd->erasesize * ip->firstUnit; | |
| numparts = 1; | |
| } | |
| if (ip->flags & INFTL_BINARY) | |
| parts[numparts].name = " DiskOnChip BDK partition"; | |
| else | |
| parts[numparts].name = " DiskOnChip BDTL partition"; | |
| parts[numparts].offset = ip->firstUnit << vshift; | |
| parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift; | |
| numparts++; | |
| if (ip->lastUnit > lastvunit) | |
| lastvunit = ip->lastUnit; | |
| if (ip->flags & INFTL_LAST) | |
| break; | |
| } | |
| lastvunit++; | |
| if ((lastvunit << vshift) < end) { | |
| parts[numparts].name = " DiskOnChip Remainder partition"; | |
| parts[numparts].offset = lastvunit << vshift; | |
| parts[numparts].size = end - parts[numparts].offset; | |
| numparts++; | |
| } | |
| ret = numparts; | |
| out: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static int __init nftl_scan_bbt(struct mtd_info *mtd) | |
| { | |
| int ret, numparts; | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| struct mtd_partition parts[2]; | |
| memset((char *)parts, 0, sizeof(parts)); | |
| /* On NFTL, we have to find the media headers before we can read the | |
| BBTs, since they're stored in the media header eraseblocks. */ | |
| numparts = nftl_partscan(mtd, parts); | |
| if (!numparts) | |
| return -EIO; | |
| this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT | | |
| NAND_BBT_SAVECONTENT | NAND_BBT_WRITE | | |
| NAND_BBT_VERSION; | |
| this->bbt_td->veroffs = 7; | |
| this->bbt_td->pages[0] = doc->mh0_page + 1; | |
| if (doc->mh1_page != -1) { | |
| this->bbt_md->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT | | |
| NAND_BBT_SAVECONTENT | NAND_BBT_WRITE | | |
| NAND_BBT_VERSION; | |
| this->bbt_md->veroffs = 7; | |
| this->bbt_md->pages[0] = doc->mh1_page + 1; | |
| } else { | |
| this->bbt_md = NULL; | |
| } | |
| ret = nand_create_bbt(this); | |
| if (ret) | |
| return ret; | |
| return mtd_device_register(mtd, parts, no_autopart ? 0 : numparts); | |
| } | |
| static int __init inftl_scan_bbt(struct mtd_info *mtd) | |
| { | |
| int ret, numparts; | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| struct mtd_partition parts[5]; | |
| if (nanddev_ntargets(&this->base) > doc->chips_per_floor) { | |
| pr_err("Multi-floor INFTL devices not yet supported.\n"); | |
| return -EIO; | |
| } | |
| if (DoC_is_MillenniumPlus(doc)) { | |
| this->bbt_td->options = NAND_BBT_2BIT | NAND_BBT_ABSPAGE; | |
| if (inftl_bbt_write) | |
| this->bbt_td->options |= NAND_BBT_WRITE; | |
| this->bbt_td->pages[0] = 2; | |
| this->bbt_md = NULL; | |
| } else { | |
| this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION; | |
| if (inftl_bbt_write) | |
| this->bbt_td->options |= NAND_BBT_WRITE; | |
| this->bbt_td->offs = 8; | |
| this->bbt_td->len = 8; | |
| this->bbt_td->veroffs = 7; | |
| this->bbt_td->maxblocks = INFTL_BBT_RESERVED_BLOCKS; | |
| this->bbt_td->reserved_block_code = 0x01; | |
| this->bbt_td->pattern = "MSYS_BBT"; | |
| this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION; | |
| if (inftl_bbt_write) | |
| this->bbt_md->options |= NAND_BBT_WRITE; | |
| this->bbt_md->offs = 8; | |
| this->bbt_md->len = 8; | |
| this->bbt_md->veroffs = 7; | |
| this->bbt_md->maxblocks = INFTL_BBT_RESERVED_BLOCKS; | |
| this->bbt_md->reserved_block_code = 0x01; | |
| this->bbt_md->pattern = "TBB_SYSM"; | |
| } | |
| ret = nand_create_bbt(this); | |
| if (ret) | |
| return ret; | |
| memset((char *)parts, 0, sizeof(parts)); | |
| numparts = inftl_partscan(mtd, parts); | |
| /* At least for now, require the INFTL Media Header. We could probably | |
| do without it for non-INFTL use, since all it gives us is | |
| autopartitioning, but I want to give it more thought. */ | |
| if (!numparts) | |
| return -EIO; | |
| return mtd_device_register(mtd, parts, no_autopart ? 0 : numparts); | |
| } | |
| static inline int __init doc2000_init(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| doc->late_init = nftl_scan_bbt; | |
| doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO; | |
| doc2000_count_chips(mtd); | |
| mtd->name = "DiskOnChip 2000 (NFTL Model)"; | |
| return (4 * doc->chips_per_floor); | |
| } | |
| static inline int __init doc2001_init(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| ReadDOC(doc->virtadr, ChipID); | |
| ReadDOC(doc->virtadr, ChipID); | |
| ReadDOC(doc->virtadr, ChipID); | |
| if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) { | |
| /* It's not a Millennium; it's one of the newer | |
| DiskOnChip 2000 units with a similar ASIC. | |
| Treat it like a Millennium, except that it | |
| can have multiple chips. */ | |
| doc2000_count_chips(mtd); | |
| mtd->name = "DiskOnChip 2000 (INFTL Model)"; | |
| doc->late_init = inftl_scan_bbt; | |
| return (4 * doc->chips_per_floor); | |
| } else { | |
| /* Bog-standard Millennium */ | |
| doc->chips_per_floor = 1; | |
| mtd->name = "DiskOnChip Millennium"; | |
| doc->late_init = nftl_scan_bbt; | |
| return 1; | |
| } | |
| } | |
| static inline int __init doc2001plus_init(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *this = mtd_to_nand(mtd); | |
| struct doc_priv *doc = nand_get_controller_data(this); | |
| doc->late_init = inftl_scan_bbt; | |
| this->ecc.hwctl = doc2001plus_enable_hwecc; | |
| doc->chips_per_floor = 1; | |
| mtd->name = "DiskOnChip Millennium Plus"; | |
| return 1; | |
| } | |
| static int doc200x_attach_chip(struct nand_chip *chip) | |
| { | |
| if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) | |
| return 0; | |
| chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED; | |
| chip->ecc.size = 512; | |
| chip->ecc.bytes = 6; | |
| chip->ecc.strength = 2; | |
| chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; | |
| chip->ecc.hwctl = doc200x_enable_hwecc; | |
| chip->ecc.calculate = doc200x_calculate_ecc; | |
| chip->ecc.correct = doc200x_correct_data; | |
| return 0; | |
| } | |
| static const struct nand_controller_ops doc200x_ops = { | |
| .exec_op = doc200x_exec_op, | |
| .attach_chip = doc200x_attach_chip, | |
| }; | |
| static const struct nand_controller_ops doc2001plus_ops = { | |
| .exec_op = doc2001plus_exec_op, | |
| .attach_chip = doc200x_attach_chip, | |
| }; | |
| static int __init doc_probe(unsigned long physadr) | |
| { | |
| struct nand_chip *nand = NULL; | |
| struct doc_priv *doc = NULL; | |
| unsigned char ChipID; | |
| struct mtd_info *mtd; | |
| void __iomem *virtadr; | |
| unsigned char save_control; | |
| unsigned char tmp, tmpb, tmpc; | |
| int reg, len, numchips; | |
| int ret = 0; | |
| if (!request_mem_region(physadr, DOC_IOREMAP_LEN, "DiskOnChip")) | |
| return -EBUSY; | |
| virtadr = ioremap(physadr, DOC_IOREMAP_LEN); | |
| if (!virtadr) { | |
| pr_err("Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", | |
| DOC_IOREMAP_LEN, physadr); | |
| ret = -EIO; | |
| goto error_ioremap; | |
| } | |
| /* It's not possible to cleanly detect the DiskOnChip - the | |
| * bootup procedure will put the device into reset mode, and | |
| * it's not possible to talk to it without actually writing | |
| * to the DOCControl register. So we store the current contents | |
| * of the DOCControl register's location, in case we later decide | |
| * that it's not a DiskOnChip, and want to put it back how we | |
| * found it. | |
| */ | |
| save_control = ReadDOC(virtadr, DOCControl); | |
| /* Reset the DiskOnChip ASIC */ | |
| WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl); | |
| WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl); | |
| /* Enable the DiskOnChip ASIC */ | |
| WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl); | |
| WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl); | |
| ChipID = ReadDOC(virtadr, ChipID); | |
| switch (ChipID) { | |
| case DOC_ChipID_Doc2k: | |
| reg = DoC_2k_ECCStatus; | |
| break; | |
| case DOC_ChipID_DocMil: | |
| reg = DoC_ECCConf; | |
| break; | |
| case DOC_ChipID_DocMilPlus16: | |
| case DOC_ChipID_DocMilPlus32: | |
| case 0: | |
| /* Possible Millennium Plus, need to do more checks */ | |
| /* Possibly release from power down mode */ | |
| for (tmp = 0; (tmp < 4); tmp++) | |
| ReadDOC(virtadr, Mplus_Power); | |
| /* Reset the Millennium Plus ASIC */ | |
| tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT; | |
| WriteDOC(tmp, virtadr, Mplus_DOCControl); | |
| WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); | |
| usleep_range(1000, 2000); | |
| /* Enable the Millennium Plus ASIC */ | |
| tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT; | |
| WriteDOC(tmp, virtadr, Mplus_DOCControl); | |
| WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); | |
| usleep_range(1000, 2000); | |
| ChipID = ReadDOC(virtadr, ChipID); | |
| switch (ChipID) { | |
| case DOC_ChipID_DocMilPlus16: | |
| reg = DoC_Mplus_Toggle; | |
| break; | |
| case DOC_ChipID_DocMilPlus32: | |
| pr_err("DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n"); | |
| fallthrough; | |
| default: | |
| ret = -ENODEV; | |
| goto notfound; | |
| } | |
| break; | |
| default: | |
| ret = -ENODEV; | |
| goto notfound; | |
| } | |
| /* Check the TOGGLE bit in the ECC register */ | |
| tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; | |
| tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; | |
| tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; | |
| if ((tmp == tmpb) || (tmp != tmpc)) { | |
| pr_warn("Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr); | |
| ret = -ENODEV; | |
| goto notfound; | |
| } | |
| for (mtd = doclist; mtd; mtd = doc->nextdoc) { | |
| unsigned char oldval; | |
| unsigned char newval; | |
| nand = mtd_to_nand(mtd); | |
| doc = nand_get_controller_data(nand); | |
| /* Use the alias resolution register to determine if this is | |
| in fact the same DOC aliased to a new address. If writes | |
| to one chip's alias resolution register change the value on | |
| the other chip, they're the same chip. */ | |
| if (ChipID == DOC_ChipID_DocMilPlus16) { | |
| oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution); | |
| newval = ReadDOC(virtadr, Mplus_AliasResolution); | |
| } else { | |
| oldval = ReadDOC(doc->virtadr, AliasResolution); | |
| newval = ReadDOC(virtadr, AliasResolution); | |
| } | |
| if (oldval != newval) | |
| continue; | |
| if (ChipID == DOC_ChipID_DocMilPlus16) { | |
| WriteDOC(~newval, virtadr, Mplus_AliasResolution); | |
| oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution); | |
| WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it | |
| } else { | |
| WriteDOC(~newval, virtadr, AliasResolution); | |
| oldval = ReadDOC(doc->virtadr, AliasResolution); | |
| WriteDOC(newval, virtadr, AliasResolution); // restore it | |
| } | |
| newval = ~newval; | |
| if (oldval == newval) { | |
| pr_debug("Found alias of DOC at 0x%lx to 0x%lx\n", | |
| doc->physadr, physadr); | |
| goto notfound; | |
| } | |
| } | |
| pr_notice("DiskOnChip found at 0x%lx\n", physadr); | |
| len = sizeof(struct nand_chip) + sizeof(struct doc_priv) + | |
| (2 * sizeof(struct nand_bbt_descr)); | |
| nand = kzalloc(len, GFP_KERNEL); | |
| if (!nand) { | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| /* | |
| * Allocate a RS codec instance | |
| * | |
| * Symbolsize is 10 (bits) | |
| * Primitve polynomial is x^10+x^3+1 | |
| * First consecutive root is 510 | |
| * Primitve element to generate roots = 1 | |
| * Generator polinomial degree = 4 | |
| */ | |
| doc = (struct doc_priv *) (nand + 1); | |
| doc->rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS); | |
| if (!doc->rs_decoder) { | |
| pr_err("DiskOnChip: Could not create a RS codec\n"); | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| nand_controller_init(&doc->base); | |
| if (ChipID == DOC_ChipID_DocMilPlus16) | |
| doc->base.ops = &doc2001plus_ops; | |
| else | |
| doc->base.ops = &doc200x_ops; | |
| mtd = nand_to_mtd(nand); | |
| nand->bbt_td = (struct nand_bbt_descr *) (doc + 1); | |
| nand->bbt_md = nand->bbt_td + 1; | |
| mtd->owner = THIS_MODULE; | |
| mtd_set_ooblayout(mtd, &doc200x_ooblayout_ops); | |
| nand->controller = &doc->base; | |
| nand_set_controller_data(nand, doc); | |
| nand->bbt_options = NAND_BBT_USE_FLASH; | |
| /* Skip the automatic BBT scan so we can run it manually */ | |
| nand->options |= NAND_SKIP_BBTSCAN | NAND_NO_BBM_QUIRK; | |
| doc->physadr = physadr; | |
| doc->virtadr = virtadr; | |
| doc->ChipID = ChipID; | |
| doc->curfloor = -1; | |
| doc->curchip = -1; | |
| doc->mh0_page = -1; | |
| doc->mh1_page = -1; | |
| doc->nextdoc = doclist; | |
| if (ChipID == DOC_ChipID_Doc2k) | |
| numchips = doc2000_init(mtd); | |
| else if (ChipID == DOC_ChipID_DocMilPlus16) | |
| numchips = doc2001plus_init(mtd); | |
| else | |
| numchips = doc2001_init(mtd); | |
| ret = nand_scan(nand, numchips); | |
| if (ret) | |
| goto fail; | |
| ret = doc->late_init(mtd); | |
| if (ret) { | |
| nand_cleanup(nand); | |
| goto fail; | |
| } | |
| /* Success! */ | |
| doclist = mtd; | |
| return 0; | |
| notfound: | |
| /* Put back the contents of the DOCControl register, in case it's not | |
| actually a DiskOnChip. */ | |
| WriteDOC(save_control, virtadr, DOCControl); | |
| fail: | |
| if (doc) | |
| free_rs(doc->rs_decoder); | |
| kfree(nand); | |
| iounmap(virtadr); | |
| error_ioremap: | |
| release_mem_region(physadr, DOC_IOREMAP_LEN); | |
| return ret; | |
| } | |
| static void release_nanddoc(void) | |
| { | |
| struct mtd_info *mtd, *nextmtd; | |
| struct nand_chip *nand; | |
| struct doc_priv *doc; | |
| int ret; | |
| for (mtd = doclist; mtd; mtd = nextmtd) { | |
| nand = mtd_to_nand(mtd); | |
| doc = nand_get_controller_data(nand); | |
| nextmtd = doc->nextdoc; | |
| ret = mtd_device_unregister(mtd); | |
| WARN_ON(ret); | |
| nand_cleanup(nand); | |
| iounmap(doc->virtadr); | |
| release_mem_region(doc->physadr, DOC_IOREMAP_LEN); | |
| free_rs(doc->rs_decoder); | |
| kfree(nand); | |
| } | |
| } | |
| static int __init init_nanddoc(void) | |
| { | |
| int i, ret = 0; | |
| if (doc_config_location) { | |
| pr_info("Using configured DiskOnChip probe address 0x%lx\n", | |
| doc_config_location); | |
| ret = doc_probe(doc_config_location); | |
| if (ret < 0) | |
| return ret; | |
| } else { | |
| for (i = 0; i < ARRAY_SIZE(doc_locations); i++) { | |
| doc_probe(doc_locations[i]); | |
| } | |
| } | |
| /* No banner message any more. Print a message if no DiskOnChip | |
| found, so the user knows we at least tried. */ | |
| if (!doclist) { | |
| pr_info("No valid DiskOnChip devices found\n"); | |
| ret = -ENODEV; | |
| } | |
| return ret; | |
| } | |
| static void __exit cleanup_nanddoc(void) | |
| { | |
| /* Cleanup the nand/DoC resources */ | |
| release_nanddoc(); | |
| } | |
| module_init(init_nanddoc); | |
| module_exit(cleanup_nanddoc); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); | |
| MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver"); |