| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * | |
| * Copyright (C) 2007 Mike Isely <isely@pobox.com> | |
| */ | |
| /* | |
| This source file should encompass ALL per-device type information for the | |
| driver. To define a new device, add elements to the pvr2_device_table and | |
| pvr2_device_desc structures. | |
| */ | |
| #include "pvrusb2-devattr.h" | |
| #include <linux/usb.h> | |
| #include <linux/module.h> | |
| /* This is needed in order to pull in tuner type ids... */ | |
| #include <linux/i2c.h> | |
| #include <media/tuner.h> | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| #include "pvrusb2-hdw-internal.h" | |
| #include "lgdt330x.h" | |
| #include "s5h1409.h" | |
| #include "s5h1411.h" | |
| #include "tda10048.h" | |
| #include "tda18271.h" | |
| #include "tda8290.h" | |
| #include "tuner-simple.h" | |
| #include "si2157.h" | |
| #include "lgdt3306a.h" | |
| #include "si2168.h" | |
| #endif | |
| /*------------------------------------------------------------------------*/ | |
| /* Hauppauge PVR-USB2 Model 29xxx */ | |
| static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = { | |
| { .module_id = PVR2_CLIENT_ID_SAA7115 }, | |
| { .module_id = PVR2_CLIENT_ID_MSP3400 }, | |
| { .module_id = PVR2_CLIENT_ID_TUNER }, | |
| { .module_id = PVR2_CLIENT_ID_DEMOD }, | |
| }; | |
| #define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw" | |
| static const char *pvr2_fw1_names_29xxx[] = { | |
| PVR2_FIRMWARE_29xxx, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_29xxx = { | |
| .description = "WinTV PVR USB2 Model 29xxx", | |
| .shortname = "29xxx", | |
| .client_table.lst = pvr2_cli_29xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_29xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), | |
| .flag_has_hauppauge_rom = !0, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_fmradio = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_29XXX, | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* Hauppauge PVR-USB2 Model 24xxx */ | |
| static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = { | |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, | |
| { .module_id = PVR2_CLIENT_ID_TUNER }, | |
| { .module_id = PVR2_CLIENT_ID_WM8775 }, | |
| { .module_id = PVR2_CLIENT_ID_DEMOD }, | |
| }; | |
| #define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw" | |
| static const char *pvr2_fw1_names_24xxx[] = { | |
| PVR2_FIRMWARE_24xxx, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_24xxx = { | |
| .description = "WinTV PVR USB2 Model 24xxx", | |
| .shortname = "24xxx", | |
| .client_table.lst = pvr2_cli_24xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_24xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), | |
| .flag_has_cx25840 = !0, | |
| .flag_has_wm8775 = !0, | |
| .flag_has_hauppauge_rom = !0, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_fmradio = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_24XXX, | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* GOTVIEW USB2.0 DVD2 */ | |
| static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = { | |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, | |
| { .module_id = PVR2_CLIENT_ID_TUNER }, | |
| { .module_id = PVR2_CLIENT_ID_DEMOD }, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_gotview_2 = { | |
| .description = "Gotview USB 2.0 DVD 2", | |
| .shortname = "gv2", | |
| .client_table.lst = pvr2_cli_gotview_2, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), | |
| .flag_has_cx25840 = !0, | |
| .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_fmradio = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* GOTVIEW USB2.0 DVD Deluxe */ | |
| /* (same module list as gotview_2) */ | |
| static const struct pvr2_device_desc pvr2_device_gotview_2d = { | |
| .description = "Gotview USB 2.0 DVD Deluxe", | |
| .shortname = "gv2d", | |
| .client_table.lst = pvr2_cli_gotview_2, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), | |
| .flag_has_cx25840 = !0, | |
| .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* Terratec Grabster AV400 */ | |
| static const struct pvr2_device_client_desc pvr2_cli_av400[] = { | |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_av400 = { | |
| .description = "Terratec Grabster AV400", | |
| .shortname = "av400", | |
| .flag_is_experimental = 1, | |
| .client_table.lst = pvr2_cli_av400, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_av400), | |
| .flag_has_cx25840 = !0, | |
| .flag_has_analogtuner = 0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400, | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* OnAir Creator */ | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| static struct lgdt330x_config pvr2_lgdt3303_config = { | |
| .demod_chip = LGDT3303, | |
| .clock_polarity_flip = 1, | |
| }; | |
| static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config, | |
| 0x0e, | |
| &adap->channel.hdw->i2c_adap); | |
| if (adap->fe[0]) | |
| return 0; | |
| return -EIO; | |
| } | |
| static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| dvb_attach(simple_tuner_attach, adap->fe[0], | |
| &adap->channel.hdw->i2c_adap, 0x61, | |
| TUNER_LG_TDVS_H06XF); | |
| return 0; | |
| } | |
| static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = { | |
| .frontend_attach = pvr2_lgdt3303_attach, | |
| .tuner_attach = pvr2_lgh06xf_attach, | |
| }; | |
| #endif | |
| static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = { | |
| { .module_id = PVR2_CLIENT_ID_SAA7115 }, | |
| { .module_id = PVR2_CLIENT_ID_CS53L32A }, | |
| { .module_id = PVR2_CLIENT_ID_TUNER }, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_onair_creator = { | |
| .description = "OnAir Creator Hybrid USB tuner", | |
| .shortname = "oac", | |
| .client_table.lst = pvr2_cli_onair_creator, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator), | |
| .default_tuner_type = TUNER_LG_TDVS_H06XF, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .flag_digital_requires_cx23416 = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, | |
| .default_std_mask = V4L2_STD_NTSC_M, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_onair_creator_fe_props, | |
| #endif | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* OnAir USB 2.0 */ | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| static struct lgdt330x_config pvr2_lgdt3302_config = { | |
| .demod_chip = LGDT3302, | |
| }; | |
| static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config, | |
| 0x0e, | |
| &adap->channel.hdw->i2c_adap); | |
| if (adap->fe[0]) | |
| return 0; | |
| return -EIO; | |
| } | |
| static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| dvb_attach(simple_tuner_attach, adap->fe[0], | |
| &adap->channel.hdw->i2c_adap, 0x61, | |
| TUNER_PHILIPS_FCV1236D); | |
| return 0; | |
| } | |
| static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = { | |
| .frontend_attach = pvr2_lgdt3302_attach, | |
| .tuner_attach = pvr2_fcv1236d_attach, | |
| }; | |
| #endif | |
| static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = { | |
| { .module_id = PVR2_CLIENT_ID_SAA7115 }, | |
| { .module_id = PVR2_CLIENT_ID_CS53L32A }, | |
| { .module_id = PVR2_CLIENT_ID_TUNER }, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_onair_usb2 = { | |
| .description = "OnAir USB2 Hybrid USB tuner", | |
| .shortname = "oa2", | |
| .client_table.lst = pvr2_cli_onair_usb2, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2), | |
| .default_tuner_type = TUNER_PHILIPS_FCV1236D, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .flag_digital_requires_cx23416 = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, | |
| .default_std_mask = V4L2_STD_NTSC_M, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_onair_usb2_fe_props, | |
| #endif | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* Hauppauge PVR-USB2 Model 73xxx */ | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| static struct tda10048_config hauppauge_tda10048_config = { | |
| .demod_address = 0x10 >> 1, | |
| .output_mode = TDA10048_PARALLEL_OUTPUT, | |
| .fwbulkwritelen = TDA10048_BULKWRITE_50, | |
| .inversion = TDA10048_INVERSION_ON, | |
| .dtv6_if_freq_khz = TDA10048_IF_3300, | |
| .dtv7_if_freq_khz = TDA10048_IF_3800, | |
| .dtv8_if_freq_khz = TDA10048_IF_4300, | |
| .clk_freq_khz = TDA10048_CLK_16000, | |
| .disable_gate_access = 1, | |
| }; | |
| static struct tda829x_config tda829x_no_probe = { | |
| .probe_tuner = TDA829X_DONT_PROBE, | |
| }; | |
| static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { | |
| .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, | |
| .if_lvl = 1, .rfagc_top = 0x37, }, | |
| .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, | |
| .if_lvl = 1, .rfagc_top = 0x37, }, | |
| .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, | |
| .if_lvl = 1, .rfagc_top = 0x37, }, | |
| }; | |
| static struct tda18271_config hauppauge_tda18271_dvb_config = { | |
| .std_map = &hauppauge_tda18271_dvbt_std_map, | |
| .gate = TDA18271_GATE_ANALOG, | |
| .output_opt = TDA18271_OUTPUT_LT_OFF, | |
| }; | |
| static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| adap->fe[0] = dvb_attach(tda10048_attach, &hauppauge_tda10048_config, | |
| &adap->channel.hdw->i2c_adap); | |
| if (adap->fe[0]) | |
| return 0; | |
| return -EIO; | |
| } | |
| static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| dvb_attach(tda829x_attach, adap->fe[0], | |
| &adap->channel.hdw->i2c_adap, 0x42, | |
| &tda829x_no_probe); | |
| dvb_attach(tda18271_attach, adap->fe[0], 0x60, | |
| &adap->channel.hdw->i2c_adap, | |
| &hauppauge_tda18271_dvb_config); | |
| return 0; | |
| } | |
| static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = { | |
| .frontend_attach = pvr2_tda10048_attach, | |
| .tuner_attach = pvr2_73xxx_tda18271_8295_attach, | |
| }; | |
| #endif | |
| static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = { | |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, | |
| { .module_id = PVR2_CLIENT_ID_TUNER, | |
| .i2c_address_list = "\x42"}, | |
| }; | |
| #define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw" | |
| static const char *pvr2_fw1_names_73xxx[] = { | |
| PVR2_FIRMWARE_73xxx, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_73xxx = { | |
| .description = "WinTV HVR-1900 Model 73xxx", | |
| .shortname = "73xxx", | |
| .client_table.lst = pvr2_cli_73xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_73xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), | |
| .flag_has_cx25840 = !0, | |
| .flag_has_hauppauge_rom = !0, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .flag_fx2_16kb = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_73xxx_dvb_props, | |
| #endif | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* Hauppauge PVR-USB2 Model 75xxx */ | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| static struct s5h1409_config pvr2_s5h1409_config = { | |
| .demod_address = 0x32 >> 1, | |
| .output_mode = S5H1409_PARALLEL_OUTPUT, | |
| .gpio = S5H1409_GPIO_OFF, | |
| .qam_if = 4000, | |
| .inversion = S5H1409_INVERSION_ON, | |
| .status_mode = S5H1409_DEMODLOCKING, | |
| }; | |
| static struct s5h1411_config pvr2_s5h1411_config = { | |
| .output_mode = S5H1411_PARALLEL_OUTPUT, | |
| .gpio = S5H1411_GPIO_OFF, | |
| .vsb_if = S5H1411_IF_44000, | |
| .qam_if = S5H1411_IF_4000, | |
| .inversion = S5H1411_INVERSION_ON, | |
| .status_mode = S5H1411_DEMODLOCKING, | |
| }; | |
| static struct tda18271_std_map hauppauge_tda18271_std_map = { | |
| .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, | |
| .if_lvl = 6, .rfagc_top = 0x37, }, | |
| .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, | |
| .if_lvl = 6, .rfagc_top = 0x37, }, | |
| }; | |
| static struct tda18271_config hauppauge_tda18271_config = { | |
| .std_map = &hauppauge_tda18271_std_map, | |
| .gate = TDA18271_GATE_ANALOG, | |
| .output_opt = TDA18271_OUTPUT_LT_OFF, | |
| }; | |
| static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| adap->fe[0] = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config, | |
| &adap->channel.hdw->i2c_adap); | |
| if (adap->fe[0]) | |
| return 0; | |
| return -EIO; | |
| } | |
| static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| adap->fe[0] = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config, | |
| &adap->channel.hdw->i2c_adap); | |
| if (adap->fe[0]) | |
| return 0; | |
| return -EIO; | |
| } | |
| static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| dvb_attach(tda829x_attach, adap->fe[0], | |
| &adap->channel.hdw->i2c_adap, 0x42, | |
| &tda829x_no_probe); | |
| dvb_attach(tda18271_attach, adap->fe[0], 0x60, | |
| &adap->channel.hdw->i2c_adap, | |
| &hauppauge_tda18271_config); | |
| return 0; | |
| } | |
| static const struct pvr2_dvb_props pvr2_750xx_dvb_props = { | |
| .frontend_attach = pvr2_s5h1409_attach, | |
| .tuner_attach = pvr2_tda18271_8295_attach, | |
| }; | |
| static const struct pvr2_dvb_props pvr2_751xx_dvb_props = { | |
| .frontend_attach = pvr2_s5h1411_attach, | |
| .tuner_attach = pvr2_tda18271_8295_attach, | |
| }; | |
| #endif | |
| #define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw" | |
| static const char *pvr2_fw1_names_75xxx[] = { | |
| PVR2_FIRMWARE_75xxx, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_750xx = { | |
| .description = "WinTV HVR-1950 Model 750xx", | |
| .shortname = "750xx", | |
| .client_table.lst = pvr2_cli_73xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_75xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), | |
| .flag_has_cx25840 = !0, | |
| .flag_has_hauppauge_rom = !0, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .flag_fx2_16kb = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, | |
| .default_std_mask = V4L2_STD_NTSC_M, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_750xx_dvb_props, | |
| #endif | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_751xx = { | |
| .description = "WinTV HVR-1950 Model 751xx", | |
| .shortname = "751xx", | |
| .client_table.lst = pvr2_cli_73xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_75xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), | |
| .flag_has_cx25840 = !0, | |
| .flag_has_hauppauge_rom = !0, | |
| .flag_has_analogtuner = !0, | |
| .flag_has_composite = !0, | |
| .flag_has_svideo = !0, | |
| .flag_fx2_16kb = !0, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, | |
| .default_std_mask = V4L2_STD_NTSC_M, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_751xx_dvb_props, | |
| #endif | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| /* Hauppauge PVR-USB2 Model 160000 / 160111 -- HVR-1955 / HVR-1975 */ | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap); | |
| static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap); | |
| static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap); | |
| static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap); | |
| static const struct pvr2_dvb_props pvr2_160000_dvb_props = { | |
| .frontend_attach = pvr2_dual_fe_attach, | |
| .tuner_attach = pvr2_si2157_attach, | |
| }; | |
| static const struct pvr2_dvb_props pvr2_160111_dvb_props = { | |
| .frontend_attach = pvr2_lgdt3306a_attach, | |
| .tuner_attach = pvr2_si2157_attach, | |
| }; | |
| static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| struct si2157_config si2157_config = {}; | |
| si2157_config.inversion = 1; | |
| si2157_config.fe = adap->fe[0]; | |
| adap->i2c_client_tuner = dvb_module_probe("si2157", "si2177", | |
| &adap->channel.hdw->i2c_adap, | |
| 0x60, &si2157_config); | |
| if (!adap->i2c_client_tuner) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| struct si2168_config si2168_config = {}; | |
| struct i2c_adapter *adapter; | |
| pr_debug("%s()\n", __func__); | |
| si2168_config.fe = &adap->fe[1]; | |
| si2168_config.i2c_adapter = &adapter; | |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; /*2, 1-serial, 2-parallel.*/ | |
| si2168_config.ts_clock_gapped = 1; /*0-disabled, 1-enabled.*/ | |
| si2168_config.ts_clock_inv = 0; /*0-not-invert, 1-invert*/ | |
| si2168_config.spectral_inversion = 1; /*0-not-invert, 1-invert*/ | |
| adap->i2c_client_demod[1] = dvb_module_probe("si2168", NULL, | |
| &adap->channel.hdw->i2c_adap, | |
| 0x64, &si2168_config); | |
| if (!adap->i2c_client_demod[1]) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| struct lgdt3306a_config lgdt3306a_config; | |
| struct i2c_adapter *adapter; | |
| pr_debug("%s()\n", __func__); | |
| lgdt3306a_config.fe = &adap->fe[0]; | |
| lgdt3306a_config.i2c_adapter = &adapter; | |
| lgdt3306a_config.deny_i2c_rptr = 1; | |
| lgdt3306a_config.spectral_inversion = 1; | |
| lgdt3306a_config.qam_if_khz = 4000; | |
| lgdt3306a_config.vsb_if_khz = 3250; | |
| lgdt3306a_config.mpeg_mode = LGDT3306A_MPEG_PARALLEL; | |
| lgdt3306a_config.tpclk_edge = LGDT3306A_TPCLK_FALLING_EDGE; | |
| lgdt3306a_config.tpvalid_polarity = LGDT3306A_TP_VALID_LOW; | |
| lgdt3306a_config.xtalMHz = 25; /* demod clock MHz; 24/25 supported */ | |
| adap->i2c_client_demod[0] = dvb_module_probe("lgdt3306a", NULL, | |
| &adap->channel.hdw->i2c_adap, | |
| 0x59, &lgdt3306a_config); | |
| if (!adap->i2c_client_demod[0]) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap) | |
| { | |
| pr_debug("%s()\n", __func__); | |
| if (pvr2_lgdt3306a_attach(adap) != 0) | |
| return -ENODEV; | |
| if (pvr2_si2168_attach(adap) != 0) { | |
| dvb_module_release(adap->i2c_client_demod[0]); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| #define PVR2_FIRMWARE_160xxx "v4l-pvrusb2-160xxx-01.fw" | |
| static const char *pvr2_fw1_names_160xxx[] = { | |
| PVR2_FIRMWARE_160xxx, | |
| }; | |
| static const struct pvr2_device_client_desc pvr2_cli_160xxx[] = { | |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_160000 = { | |
| .description = "WinTV HVR-1975 Model 160000", | |
| .shortname = "160000", | |
| .client_table.lst = pvr2_cli_160xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_160xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx), | |
| .default_tuner_type = TUNER_ABSENT, | |
| .flag_has_cx25840 = 1, | |
| .flag_has_hauppauge_rom = 1, | |
| .flag_has_analogtuner = 1, | |
| .flag_has_composite = 1, | |
| .flag_has_svideo = 1, | |
| .flag_fx2_16kb = 1, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, | |
| .default_std_mask = V4L2_STD_NTSC_M, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_160000_dvb_props, | |
| #endif | |
| }; | |
| static const struct pvr2_device_desc pvr2_device_160111 = { | |
| .description = "WinTV HVR-1955 Model 160111", | |
| .shortname = "160111", | |
| .client_table.lst = pvr2_cli_160xxx, | |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx), | |
| .fx2_firmware.lst = pvr2_fw1_names_160xxx, | |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx), | |
| .default_tuner_type = TUNER_ABSENT, | |
| .flag_has_cx25840 = 1, | |
| .flag_has_hauppauge_rom = 1, | |
| .flag_has_analogtuner = 1, | |
| .flag_has_composite = 1, | |
| .flag_has_svideo = 1, | |
| .flag_fx2_16kb = 1, | |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, | |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, | |
| .default_std_mask = V4L2_STD_NTSC_M, | |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, | |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, | |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB | |
| .dvb_props = &pvr2_160111_dvb_props, | |
| #endif | |
| }; | |
| /*------------------------------------------------------------------------*/ | |
| struct usb_device_id pvr2_device_table[] = { | |
| { USB_DEVICE(0x2040, 0x2900), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, | |
| { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */ | |
| .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, | |
| { USB_DEVICE(0x2040, 0x2400), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, | |
| { USB_DEVICE(0x1164, 0x0622), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, | |
| { USB_DEVICE(0x1164, 0x0602), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d}, | |
| { USB_DEVICE(0x11ba, 0x1003), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, | |
| { USB_DEVICE(0x11ba, 0x1001), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, | |
| { USB_DEVICE(0x2040, 0x7300), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, | |
| { USB_DEVICE(0x2040, 0x7500), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, | |
| { USB_DEVICE(0x2040, 0x7501), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, | |
| { USB_DEVICE(0x0ccd, 0x0039), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_av400}, | |
| { USB_DEVICE(0x2040, 0x7502), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_160111}, | |
| { USB_DEVICE(0x2040, 0x7510), | |
| .driver_info = (kernel_ulong_t)&pvr2_device_160000}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, pvr2_device_table); | |
| MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); | |
| MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); | |
| MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); | |
| MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx); |