Documentation/firmware-guide/acpi/dsd/data-node-references.rst

.. SPDX-License-Identifier: GPL-2.0
.. include:: <isonum.txt>

===================================
Referencing hierarchical data nodes
===================================

:Copyright: |copy| 2018, 2021 Intel Corporation
:Author: Sakari Ailus <sakari.ailus@linux.intel.com>

ACPI in general allows referring to device objects in the tree only.
Hierarchical data extension nodes may not be referred to directly, hence this
document defines a scheme to implement such references.

A reference to a _DSD hierarchical data node is a string consisting of a
device object reference followed by a dot (".") and a relative path to a data
node object. Do not use non-string references as this will produce a copy of
the hierarchical data node, not a reference!

The hierarchical data extension node which is referred to shall be located
directly under its parent object i.e. either the device object or another
hierarchical data extension node [dsd-guide].

The keys in the hierarchical data nodes shall consist of the name of the node,
"@" character and the number of the node in hexadecimal notation (without pre-
or postfixes). The same ACPI object shall include the _DSD property extension
with a property "reg" that shall have the same numerical value as the number of
the node.

In case a hierarchical data extensions node has no numerical value, then the
"reg" property shall be omitted from the ACPI object's _DSD properties and the
"@" character and the number shall be omitted from the hierarchical data
extension key.


Example
=======

In the ASL snippet below, the "reference" _DSD property contains a string
reference to a hierarchical data extension node ANOD under DEV0 under the parent
of DEV1. ANOD is also the final target node of the reference.
::

	Device (DEV0)
	{
	    Name (_DSD, Package () {
		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
		Package () {
		    Package () { "node@0", "NOD0" },
		    Package () { "node@1", "NOD1" },
		}
	    })
	    Name (NOD0, Package() {
		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
		Package () {
		    Package () { "reg", 0 },
		    Package () { "random-property", 3 },
		}
	    })
	    Name (NOD1, Package() {
		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
		Package () {
		    Package () { "reg", 1 },
		    Package () { "anothernode", "ANOD" },
		}
	    })
	    Name (ANOD, Package() {
		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
		Package () {
		    Package () { "random-property", 0 },
		}
	    })
	}

	Device (DEV1)
	{
	    Name (_DSD, Package () {
		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
		Package () {
		    Package () { "reference", "^DEV0.ANOD" }
		    },
		}
	    })
	}

Please also see a graph example in
Documentation/firmware-guide/acpi/dsd/graph.rst.

References
==========

[dsd-guide] DSD Guide.
    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
    2021-11-30.