| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/phy/st,stm32-usb2phy.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: STMicroelectronics STM32 MPU High-Speed USB PHY | |
| description: | |
| USB2 PHY block in STM32 is attached to USB 2.0 Host controller and | |
| USB 2.0 side of DWC3 DRD controller, and provides the USB LS/FS/HS | |
| connectivity. Both PHYs are the FEMTO-PHY, but their configuration | |
| bits in the system control register are different for each variant. | |
| maintainers: | |
| - Fabrice Gasnier <fabrice.gasnier@foss.st.com> | |
| - Marek Vasut <marex@nabladev.com> | |
| - Pankaj Dev <pankaj.dev@st.com> | |
| properties: | |
| compatible: | |
| enum: | |
| - st,stm32mp25-usb2phy1 | |
| - st,stm32mp25-usb2phy2 | |
| reg: | |
| maxItems: 1 | |
| clocks: | |
| maxItems: 1 | |
| resets: | |
| maxItems: 1 | |
| vdd33-supply: | |
| description: Phandle to regulator providing 3V3 power supply to the USB2 HS PHY | |
| "#clock-cells": | |
| const: 1 | |
| "#phy-cells": | |
| const: 0 | |
| required: | |
| - compatible | |
| - reg | |
| - clocks | |
| - resets | |
| - vdd33-supply | |
| - "#clock-cells" | |
| - "#phy-cells" | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/st,stm32mp25-rcc.h> | |
| #include <dt-bindings/reset/st,stm32mp25-rcc.h> | |
| usb-phy@2400 { | |
| compatible = "st,stm32mp25-usb2phy1"; | |
| reg = <0x2400 0x24>; | |
| #phy-cells = <0>; | |
| #clock-cells = <1>; | |
| clocks = <&rcc CK_KER_USB2PHY1>; | |
| resets = <&rcc USB2PHY1_R>; | |
| vdd33-supply = <&vdd33usb>; | |
| }; |