| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/spacemit,k3-dwmac.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Spacemit K3 DWMAC glue layer |
| |
| maintainers: |
| - Inochi Amaoto <inochiama@gmail.com> |
| |
| select: |
| properties: |
| compatible: |
| contains: |
| const: spacemit,k3-dwmac |
| required: |
| - compatible |
| |
| properties: |
| compatible: |
| items: |
| - const: spacemit,k3-dwmac |
| - const: snps,dwmac-5.40a |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| items: |
| - description: GMAC application clock |
| - description: PTP clock |
| - description: TX clock |
| |
| clock-names: |
| items: |
| - const: stmmaceth |
| - const: ptp_ref |
| - const: tx |
| |
| interrupts: |
| minItems: 1 |
| items: |
| - description: MAC interrupt |
| - description: MAC wake interrupt |
| |
| interrupt-names: |
| minItems: 1 |
| items: |
| - const: macirq |
| - const: eth_wake_irq |
| |
| resets: |
| maxItems: 1 |
| |
| reset-names: |
| const: stmmaceth |
| |
| spacemit,apmu: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| items: |
| - items: |
| - description: phandle to the syscon node which control the glue register |
| - description: offset of the control register |
| - description: offset of the dline register |
| description: |
| A phandle to syscon with offset to control registers for this MAC |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - clock-names |
| - interrupts |
| - interrupt-names |
| - resets |
| - reset-names |
| - spacemit,apmu |
| |
| allOf: |
| - $ref: snps,dwmac.yaml# |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| ethernet@cac80000 { |
| compatible = "spacemit,k3-dwmac", "snps,dwmac-5.40a"; |
| reg = <0xcac80000 0x2000>; |
| clocks = <&syscon_apmu 66>, <&syscon_apmu 68>, |
| <&syscon_apmu 69>; |
| clock-names = "stmmaceth", "ptp_ref", "tx"; |
| interrupts = <131 IRQ_TYPE_LEVEL_HIGH>, <276 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "eth_wake_irq"; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&phy0>; |
| resets = <&syscon_apmu 67>; |
| reset-names = "stmmaceth"; |
| spacemit,apmu = <&syscon_apmu 0x384 0x38c>; |
| }; |