| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/partitions/simple-partition.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Simple partition types |
| |
| description: |
| Simple partition types which only define a "compatible" value and no custom |
| properties. |
| |
| maintainers: |
| - Rafał Miłecki <rafal@milecki.pl> |
| - Simon Glass <sjg@chromium.org> |
| |
| allOf: |
| - $ref: partition.yaml# |
| |
| properties: |
| compatible: |
| oneOf: |
| - const: brcm,bcm4908-firmware |
| description: |
| Broadcom BCM4908 CFE bootloader firmware partition |
| |
| - const: brcm,bcm963xx-imagetag |
| description: |
| The BCM963XX ImageTag is a simple firmware header describing the |
| offsets and sizes of the rootfs and kernel parts contained in the |
| firmware. |
| |
| - const: seama |
| description: |
| The SEAttle iMAge (SEAMA) partition is a type of partition used for |
| NAND flash devices. This type of flash image is found in some D-Link |
| routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L |
| and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), |
| Broadcom BCM53xx, and RAMIPS platforms. This partition type does not |
| have children defined in the device tree, they need to be detected by |
| software. |
| |
| - const: u-boot |
| description: > |
| u-boot.bin from U-Boot project. |
| |
| This corresponds to a binman 'entry'. It is a single partition which holds |
| data of a defined type. |
| |
| Binman uses the type to indicate what data file / type to place in the |
| partition. There are quite a number of binman-specific entry types, such as |
| section, fill and files, to be added later. |
| |
| - const: tfa-bl31 |
| description: > |
| bl31.bin or bl31.elf from TF-A project |
| |
| This corresponds to a binman 'entry'. It is a single partition which holds |
| data of a defined type. |
| |
| unevaluatedProperties: false |
