| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/qcom,qcm2290-venus.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm QCM2290 Venus video encode and decode accelerators |
| |
| maintainers: |
| - Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> |
| |
| description: |
| The Venus AR50_LITE IP is a video encode and decode accelerator present |
| on Qualcomm platforms. |
| |
| allOf: |
| - $ref: qcom,venus-common.yaml# |
| |
| properties: |
| compatible: |
| const: qcom,qcm2290-venus |
| |
| power-domains: |
| maxItems: 3 |
| |
| power-domain-names: |
| items: |
| - const: venus |
| - const: vcodec0 |
| - const: cx |
| |
| clocks: |
| maxItems: 6 |
| |
| clock-names: |
| items: |
| - const: core |
| - const: iface |
| - const: bus |
| - const: throttle |
| - const: vcodec0_core |
| - const: vcodec0_bus |
| |
| iommus: |
| maxItems: 2 |
| |
| interconnects: |
| maxItems: 2 |
| |
| interconnect-names: |
| items: |
| - const: video-mem |
| - const: cpu-cfg |
| |
| operating-points-v2: true |
| opp-table: |
| type: object |
| |
| required: |
| - compatible |
| - power-domain-names |
| - iommus |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/qcom,gcc-qcm2290.h> |
| #include <dt-bindings/interconnect/qcom,qcm2290.h> |
| #include <dt-bindings/interconnect/qcom,rpm-icc.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| |
| venus: video-codec@5a00000 { |
| compatible = "qcom,qcm2290-venus"; |
| reg = <0x5a00000 0xf0000>; |
| |
| interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; |
| |
| power-domains = <&gcc GCC_VENUS_GDSC>, |
| <&gcc GCC_VCODEC0_GDSC>, |
| <&rpmpd QCM2290_VDDCX>; |
| power-domain-names = "venus", |
| "vcodec0", |
| "cx"; |
| |
| operating-points-v2 = <&venus_opp_table>; |
| |
| clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>, |
| <&gcc GCC_VIDEO_AHB_CLK>, |
| <&gcc GCC_VENUS_CTL_AXI_CLK>, |
| <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>, |
| <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>, |
| <&gcc GCC_VCODEC0_AXI_CLK>; |
| clock-names = "core", |
| "iface", |
| "bus", |
| "throttle", |
| "vcodec0_core", |
| "vcodec0_bus"; |
| |
| memory-region = <&pil_video_mem>; |
| |
| iommus = <&apps_smmu 0x860 0x0>, |
| <&apps_smmu 0x880 0x0>; |
| |
| interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG |
| &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>; |
| interconnect-names = "video-mem", |
| "cpu-cfg"; |
| |
| venus_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-133333333 { |
| opp-hz = /bits/ 64 <133333333>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| }; |
| |
| opp-240000000 { |
| opp-hz = /bits/ 64 <240000000>; |
| required-opps = <&rpmpd_opp_svs>; |
| }; |
| }; |
| }; |