| /* |
| * Key Wrapping: RFC3394 / NIST SP800-38F |
| * |
| * Copyright (C) 2015, Stephan Mueller <smueller@chronox.de> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, and the entire permission notice in its entirety, |
| * including the disclaimer of warranties. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote |
| * products derived from this software without specific prior |
| * written permission. |
| * |
| * ALTERNATIVELY, this product may be distributed under the terms of |
| * the GNU General Public License, in which case the provisions of the GPL2 |
| * are required INSTEAD OF the above restrictions. (This clause is |
| * necessary due to a potential bad interaction between the GPL and |
| * the restrictions contained in a BSD-style copyright.) |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF |
| * WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
| * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| */ |
| |
| /* |
| * Note for using key wrapping: |
| * |
| * * The result of the encryption operation is the ciphertext starting |
| * with the 2nd semiblock. The first semiblock is provided as the IV. |
| * The IV used to start the encryption operation is the default IV. |
| * |
| * * The input for the decryption is the first semiblock handed in as an |
| * IV. The ciphertext is the data starting with the 2nd semiblock. The |
| * return code of the decryption operation will be EBADMSG in case an |
| * integrity error occurs. |
| * |
| * To obtain the full result of an encryption as expected by SP800-38F, the |
| * caller must allocate a buffer of plaintext + 8 bytes: |
| * |
| * unsigned int datalen = ptlen + crypto_skcipher_ivsize(tfm); |
| * u8 data[datalen]; |
| * u8 *iv = data; |
| * u8 *pt = data + crypto_skcipher_ivsize(tfm); |
| * <ensure that pt contains the plaintext of size ptlen> |
| * sg_init_one(&sg, ptdata, ptlen); |
| * skcipher_request_set_crypt(req, &sg, &sg, ptlen, iv); |
| * |
| * ==> After encryption, data now contains full KW result as per SP800-38F. |
| * |
| * In case of decryption, ciphertext now already has the expected length |
| * and must be segmented appropriately: |
| * |
| * unsigned int datalen = CTLEN; |
| * u8 data[datalen]; |
| * <ensure that data contains full ciphertext> |
| * u8 *iv = data; |
| * u8 *ct = data + crypto_skcipher_ivsize(tfm); |
| * unsigned int ctlen = datalen - crypto_skcipher_ivsize(tfm); |
| * sg_init_one(&sg, ctdata, ctlen); |
| * skcipher_request_set_crypt(req, &sg, &sg, ptlen, iv); |
| * |
| * ==> After decryption (which hopefully does not return EBADMSG), the ct |
| * pointer now points to the plaintext of size ctlen. |
| * |
| * Note 2: KWP is not implemented as this would defy in-place operation. |
| * If somebody wants to wrap non-aligned data, he should simply pad |
| * the input with zeros to fill it up to the 8 byte boundary. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/crypto.h> |
| #include <linux/scatterlist.h> |
| #include <crypto/scatterwalk.h> |
| #include <crypto/internal/skcipher.h> |
| |
| struct crypto_kw_ctx { |
| struct crypto_cipher *child; |
| }; |
| |
| struct crypto_kw_block { |
| #define SEMIBSIZE 8 |
| __be64 A; |
| __be64 R; |
| }; |
| |
| /* |
| * Fast forward the SGL to the "end" length minus SEMIBSIZE. |
| * The start in the SGL defined by the fast-forward is returned with |
| * the walk variable |
| */ |
| static void crypto_kw_scatterlist_ff(struct scatter_walk *walk, |
| struct scatterlist *sg, |
| unsigned int end) |
| { |
| unsigned int skip = 0; |
| |
| /* The caller should only operate on full SEMIBLOCKs. */ |
| BUG_ON(end < SEMIBSIZE); |
| |
| skip = end - SEMIBSIZE; |
| while (sg) { |
| if (sg->length > skip) { |
| scatterwalk_start(walk, sg); |
| scatterwalk_advance(walk, skip); |
| break; |
| } else |
| skip -= sg->length; |
| |
| sg = sg_next(sg); |
| } |
| } |
| |
| static int crypto_kw_decrypt(struct blkcipher_desc *desc, |
| struct scatterlist *dst, struct scatterlist *src, |
| unsigned int nbytes) |
| { |
| struct crypto_blkcipher *tfm = desc->tfm; |
| struct crypto_kw_ctx *ctx = crypto_blkcipher_ctx(tfm); |
| struct crypto_cipher *child = ctx->child; |
| struct crypto_kw_block block; |
| struct scatterlist *lsrc, *ldst; |
| u64 t = 6 * ((nbytes) >> 3); |
| unsigned int i; |
| int ret = 0; |
| |
| /* |
| * Require at least 2 semiblocks (note, the 3rd semiblock that is |
| * required by SP800-38F is the IV. |
| */ |
| if (nbytes < (2 * SEMIBSIZE) || nbytes % SEMIBSIZE) |
| return -EINVAL; |
| |
| /* Place the IV into block A */ |
| memcpy(&block.A, desc->info, SEMIBSIZE); |
| |
| /* |
| * src scatterlist is read-only. dst scatterlist is r/w. During the |
| * first loop, lsrc points to src and ldst to dst. For any |
| * subsequent round, the code operates on dst only. |
| */ |
| lsrc = src; |
| ldst = dst; |
| |
| for (i = 0; i < 6; i++) { |
| struct scatter_walk src_walk, dst_walk; |
| unsigned int tmp_nbytes = nbytes; |
| |
| while (tmp_nbytes) { |
| /* move pointer by tmp_nbytes in the SGL */ |
| crypto_kw_scatterlist_ff(&src_walk, lsrc, tmp_nbytes); |
| /* get the source block */ |
| scatterwalk_copychunks(&block.R, &src_walk, SEMIBSIZE, |
| false); |
| |
| /* perform KW operation: modify IV with counter */ |
| block.A ^= cpu_to_be64(t); |
| t--; |
| /* perform KW operation: decrypt block */ |
| crypto_cipher_decrypt_one(child, (u8*)&block, |
| (u8*)&block); |
| |
| /* move pointer by tmp_nbytes in the SGL */ |
| crypto_kw_scatterlist_ff(&dst_walk, ldst, tmp_nbytes); |
| /* Copy block->R into place */ |
| scatterwalk_copychunks(&block.R, &dst_walk, SEMIBSIZE, |
| true); |
| |
| tmp_nbytes -= SEMIBSIZE; |
| } |
| |
| /* we now start to operate on the dst SGL only */ |
| lsrc = dst; |
| ldst = dst; |
| } |
| |
| /* Perform authentication check */ |
| if (block.A != cpu_to_be64(0xa6a6a6a6a6a6a6a6ULL)) |
| ret = -EBADMSG; |
| |
| memzero_explicit(&block, sizeof(struct crypto_kw_block)); |
| |
| return ret; |
| } |
| |
| static int crypto_kw_encrypt(struct blkcipher_desc *desc, |
| struct scatterlist *dst, struct scatterlist *src, |
| unsigned int nbytes) |
| { |
| struct crypto_blkcipher *tfm = desc->tfm; |
| struct crypto_kw_ctx *ctx = crypto_blkcipher_ctx(tfm); |
| struct crypto_cipher *child = ctx->child; |
| struct crypto_kw_block block; |
| struct scatterlist *lsrc, *ldst; |
| u64 t = 1; |
| unsigned int i; |
| |
| /* |
| * Require at least 2 semiblocks (note, the 3rd semiblock that is |
| * required by SP800-38F is the IV that occupies the first semiblock. |
| * This means that the dst memory must be one semiblock larger than src. |
| * Also ensure that the given data is aligned to semiblock. |
| */ |
| if (nbytes < (2 * SEMIBSIZE) || nbytes % SEMIBSIZE) |
| return -EINVAL; |
| |
| /* |
| * Place the predefined IV into block A -- for encrypt, the caller |
| * does not need to provide an IV, but he needs to fetch the final IV. |
| */ |
| block.A = cpu_to_be64(0xa6a6a6a6a6a6a6a6ULL); |
| |
| /* |
| * src scatterlist is read-only. dst scatterlist is r/w. During the |
| * first loop, lsrc points to src and ldst to dst. For any |
| * subsequent round, the code operates on dst only. |
| */ |
| lsrc = src; |
| ldst = dst; |
| |
| for (i = 0; i < 6; i++) { |
| struct scatter_walk src_walk, dst_walk; |
| unsigned int tmp_nbytes = nbytes; |
| |
| scatterwalk_start(&src_walk, lsrc); |
| scatterwalk_start(&dst_walk, ldst); |
| |
| while (tmp_nbytes) { |
| /* get the source block */ |
| scatterwalk_copychunks(&block.R, &src_walk, SEMIBSIZE, |
| false); |
| |
| /* perform KW operation: encrypt block */ |
| crypto_cipher_encrypt_one(child, (u8 *)&block, |
| (u8 *)&block); |
| /* perform KW operation: modify IV with counter */ |
| block.A ^= cpu_to_be64(t); |
| t++; |
| |
| /* Copy block->R into place */ |
| scatterwalk_copychunks(&block.R, &dst_walk, SEMIBSIZE, |
| true); |
| |
| tmp_nbytes -= SEMIBSIZE; |
| } |
| |
| /* we now start to operate on the dst SGL only */ |
| lsrc = dst; |
| ldst = dst; |
| } |
| |
| /* establish the IV for the caller to pick up */ |
| memcpy(desc->info, &block.A, SEMIBSIZE); |
| |
| memzero_explicit(&block, sizeof(struct crypto_kw_block)); |
| |
| return 0; |
| } |
| |
| static int crypto_kw_setkey(struct crypto_tfm *parent, const u8 *key, |
| unsigned int keylen) |
| { |
| struct crypto_kw_ctx *ctx = crypto_tfm_ctx(parent); |
| struct crypto_cipher *child = ctx->child; |
| int err; |
| |
| crypto_cipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); |
| crypto_cipher_set_flags(child, crypto_tfm_get_flags(parent) & |
| CRYPTO_TFM_REQ_MASK); |
| err = crypto_cipher_setkey(child, key, keylen); |
| crypto_tfm_set_flags(parent, crypto_cipher_get_flags(child) & |
| CRYPTO_TFM_RES_MASK); |
| return err; |
| } |
| |
| static int crypto_kw_init_tfm(struct crypto_tfm *tfm) |
| { |
| struct crypto_instance *inst = crypto_tfm_alg_instance(tfm); |
| struct crypto_spawn *spawn = crypto_instance_ctx(inst); |
| struct crypto_kw_ctx *ctx = crypto_tfm_ctx(tfm); |
| struct crypto_cipher *cipher; |
| |
| cipher = crypto_spawn_cipher(spawn); |
| if (IS_ERR(cipher)) |
| return PTR_ERR(cipher); |
| |
| ctx->child = cipher; |
| return 0; |
| } |
| |
| static void crypto_kw_exit_tfm(struct crypto_tfm *tfm) |
| { |
| struct crypto_kw_ctx *ctx = crypto_tfm_ctx(tfm); |
| |
| crypto_free_cipher(ctx->child); |
| } |
| |
| static struct crypto_instance *crypto_kw_alloc(struct rtattr **tb) |
| { |
| struct crypto_instance *inst = NULL; |
| struct crypto_alg *alg = NULL; |
| int err; |
| |
| err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER); |
| if (err) |
| return ERR_PTR(err); |
| |
| alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_CIPHER, |
| CRYPTO_ALG_TYPE_MASK); |
| if (IS_ERR(alg)) |
| return ERR_CAST(alg); |
| |
| inst = ERR_PTR(-EINVAL); |
| /* Section 5.1 requirement for KW */ |
| if (alg->cra_blocksize != sizeof(struct crypto_kw_block)) |
| goto err; |
| |
| inst = crypto_alloc_instance("kw", alg); |
| if (IS_ERR(inst)) |
| goto err; |
| |
| inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; |
| inst->alg.cra_priority = alg->cra_priority; |
| inst->alg.cra_blocksize = SEMIBSIZE; |
| inst->alg.cra_alignmask = 0; |
| inst->alg.cra_type = &crypto_blkcipher_type; |
| inst->alg.cra_blkcipher.ivsize = SEMIBSIZE; |
| inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize; |
| inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize; |
| |
| inst->alg.cra_ctxsize = sizeof(struct crypto_kw_ctx); |
| |
| inst->alg.cra_init = crypto_kw_init_tfm; |
| inst->alg.cra_exit = crypto_kw_exit_tfm; |
| |
| inst->alg.cra_blkcipher.setkey = crypto_kw_setkey; |
| inst->alg.cra_blkcipher.encrypt = crypto_kw_encrypt; |
| inst->alg.cra_blkcipher.decrypt = crypto_kw_decrypt; |
| |
| err: |
| crypto_mod_put(alg); |
| return inst; |
| } |
| |
| static void crypto_kw_free(struct crypto_instance *inst) |
| { |
| crypto_drop_spawn(crypto_instance_ctx(inst)); |
| kfree(inst); |
| } |
| |
| static struct crypto_template crypto_kw_tmpl = { |
| .name = "kw", |
| .alloc = crypto_kw_alloc, |
| .free = crypto_kw_free, |
| .module = THIS_MODULE, |
| }; |
| |
| static int __init crypto_kw_init(void) |
| { |
| return crypto_register_template(&crypto_kw_tmpl); |
| } |
| |
| static void __exit crypto_kw_exit(void) |
| { |
| crypto_unregister_template(&crypto_kw_tmpl); |
| } |
| |
| module_init(crypto_kw_init); |
| module_exit(crypto_kw_exit); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Stephan Mueller <smueller@chronox.de>"); |
| MODULE_DESCRIPTION("Key Wrapping (RFC3394 / NIST SP800-38F)"); |
| MODULE_ALIAS_CRYPTO("kw"); |