| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright 2017, Gustavo Romero, Breno Leitao, Cyril Bur, IBM Corp. | |
| * | |
| * Force FP, VEC and VSX unavailable exception during transaction in all | |
| * possible scenarios regarding the MSR.FP and MSR.VEC state, e.g. when FP | |
| * is enable and VEC is disable, when FP is disable and VEC is enable, and | |
| * so on. Then we check if the restored state is correctly set for the | |
| * FP and VEC registers to the previous state we set just before we entered | |
| * in TM, i.e. we check if it corrupts somehow the recheckpointed FP and | |
| * VEC/Altivec registers on abortion due to an unavailable exception in TM. | |
| * N.B. In this test we do not test all the FP/Altivec/VSX registers for | |
| * corruption, but only for registers vs0 and vs32, which are respectively | |
| * representatives of FP and VEC/Altivec reg sets. | |
| */ | |
| #define _GNU_SOURCE | |
| #include <error.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <unistd.h> | |
| #include <inttypes.h> | |
| #include <stdbool.h> | |
| #include <pthread.h> | |
| #include <sched.h> | |
| #include "tm.h" | |
| #define DEBUG 0 | |
| /* Unavailable exceptions to test in HTM */ | |
| #define FP_UNA_EXCEPTION 0 | |
| #define VEC_UNA_EXCEPTION 1 | |
| #define VSX_UNA_EXCEPTION 2 | |
| #define NUM_EXCEPTIONS 3 | |
| #define err_at_line(status, errnum, format, ...) \ | |
| error_at_line(status, errnum, __FILE__, __LINE__, format ##__VA_ARGS__) | |
| #define pr_warn(code, format, ...) err_at_line(0, code, format, ##__VA_ARGS__) | |
| #define pr_err(code, format, ...) err_at_line(1, code, format, ##__VA_ARGS__) | |
| struct Flags { | |
| int touch_fp; | |
| int touch_vec; | |
| int result; | |
| int exception; | |
| } flags; | |
| bool expecting_failure(void) | |
| { | |
| if (flags.touch_fp && flags.exception == FP_UNA_EXCEPTION) | |
| return false; | |
| if (flags.touch_vec && flags.exception == VEC_UNA_EXCEPTION) | |
| return false; | |
| /* | |
| * If both FP and VEC are touched it does not mean that touching VSX | |
| * won't raise an exception. However since FP and VEC state are already | |
| * correctly loaded, the transaction is not aborted (i.e. | |
| * treclaimed/trecheckpointed) and MSR.VSX is just set as 1, so a TM | |
| * failure is not expected also in this case. | |
| */ | |
| if ((flags.touch_fp && flags.touch_vec) && | |
| flags.exception == VSX_UNA_EXCEPTION) | |
| return false; | |
| return true; | |
| } | |
| /* Check if failure occurred whilst in transaction. */ | |
| bool is_failure(uint64_t condition_reg) | |
| { | |
| /* | |
| * When failure handling occurs, CR0 is set to 0b1010 (0xa). Otherwise | |
| * transaction completes without failure and hence reaches out 'tend.' | |
| * that sets CR0 to 0b0100 (0x4). | |
| */ | |
| return ((condition_reg >> 28) & 0xa) == 0xa; | |
| } | |
| void *tm_una_ping(void *input) | |
| { | |
| /* | |
| * Expected values for vs0 and vs32 after a TM failure. They must never | |
| * change, otherwise they got corrupted. | |
| */ | |
| uint64_t high_vs0 = 0x5555555555555555; | |
| uint64_t low_vs0 = 0xffffffffffffffff; | |
| uint64_t high_vs32 = 0x5555555555555555; | |
| uint64_t low_vs32 = 0xffffffffffffffff; | |
| /* Counter for busy wait */ | |
| uint64_t counter = 0x1ff000000; | |
| /* | |
| * Variable to keep a copy of CR register content taken just after we | |
| * leave the transactional state. | |
| */ | |
| uint64_t cr_ = 0; | |
| /* | |
| * Wait a bit so thread can get its name "ping". This is not important | |
| * to reproduce the issue but it's nice to have for systemtap debugging. | |
| */ | |
| if (DEBUG) | |
| sleep(1); | |
| printf("If MSR.FP=%d MSR.VEC=%d: ", flags.touch_fp, flags.touch_vec); | |
| if (flags.exception != FP_UNA_EXCEPTION && | |
| flags.exception != VEC_UNA_EXCEPTION && | |
| flags.exception != VSX_UNA_EXCEPTION) { | |
| printf("No valid exception specified to test.\n"); | |
| return NULL; | |
| } | |
| asm ( | |
| /* Prepare to merge low and high. */ | |
| " mtvsrd 33, %[high_vs0] ;" | |
| " mtvsrd 34, %[low_vs0] ;" | |
| /* | |
| * Adjust VS0 expected value after an TM failure, | |
| * i.e. vs0 = 0x5555555555555555555FFFFFFFFFFFFFFFF | |
| */ | |
| " xxmrghd 0, 33, 34 ;" | |
| /* | |
| * Adjust VS32 expected value after an TM failure, | |
| * i.e. vs32 = 0x5555555555555555555FFFFFFFFFFFFFFFF | |
| */ | |
| " xxmrghd 32, 33, 34 ;" | |
| /* | |
| * Wait an amount of context switches so load_fp and load_vec | |
| * overflow and MSR.FP, MSR.VEC, and MSR.VSX become zero (off). | |
| */ | |
| " mtctr %[counter] ;" | |
| /* Decrement CTR branch if CTR non zero. */ | |
| "1: bdnz 1b ;" | |
| /* | |
| * Check if we want to touch FP prior to the test in order | |
| * to set MSR.FP = 1 before provoking an unavailable | |
| * exception in TM. | |
| */ | |
| " cmpldi %[touch_fp], 0 ;" | |
| " beq no_fp ;" | |
| " fadd 10, 10, 10 ;" | |
| "no_fp: ;" | |
| /* | |
| * Check if we want to touch VEC prior to the test in order | |
| * to set MSR.VEC = 1 before provoking an unavailable | |
| * exception in TM. | |
| */ | |
| " cmpldi %[touch_vec], 0 ;" | |
| " beq no_vec ;" | |
| " vaddcuw 10, 10, 10 ;" | |
| "no_vec: ;" | |
| /* | |
| * Perhaps it would be a better idea to do the | |
| * compares outside transactional context and simply | |
| * duplicate code. | |
| */ | |
| " tbegin. ;" | |
| " beq trans_fail ;" | |
| /* Do we do FP Unavailable? */ | |
| " cmpldi %[exception], %[ex_fp] ;" | |
| " bne 1f ;" | |
| " fadd 10, 10, 10 ;" | |
| " b done ;" | |
| /* Do we do VEC Unavailable? */ | |
| "1: cmpldi %[exception], %[ex_vec] ;" | |
| " bne 2f ;" | |
| " vaddcuw 10, 10, 10 ;" | |
| " b done ;" | |
| /* | |
| * Not FP or VEC, therefore VSX. Ensure this | |
| * instruction always generates a VSX Unavailable. | |
| * ISA 3.0 is tricky here. | |
| * (xxmrghd will on ISA 2.07 and ISA 3.0) | |
| */ | |
| "2: xxmrghd 10, 10, 10 ;" | |
| "done: tend. ;" | |
| "trans_fail: ;" | |
| /* Give values back to C. */ | |
| " mfvsrd %[high_vs0], 0 ;" | |
| " xxsldwi 3, 0, 0, 2 ;" | |
| " mfvsrd %[low_vs0], 3 ;" | |
| " mfvsrd %[high_vs32], 32 ;" | |
| " xxsldwi 3, 32, 32, 2 ;" | |
| " mfvsrd %[low_vs32], 3 ;" | |
| /* Give CR back to C so that it can check what happened. */ | |
| " mfcr %[cr_] ;" | |
| : [high_vs0] "+r" (high_vs0), | |
| [low_vs0] "+r" (low_vs0), | |
| [high_vs32] "=r" (high_vs32), | |
| [low_vs32] "=r" (low_vs32), | |
| [cr_] "+r" (cr_) | |
| : [touch_fp] "r" (flags.touch_fp), | |
| [touch_vec] "r" (flags.touch_vec), | |
| [exception] "r" (flags.exception), | |
| [ex_fp] "i" (FP_UNA_EXCEPTION), | |
| [ex_vec] "i" (VEC_UNA_EXCEPTION), | |
| [ex_vsx] "i" (VSX_UNA_EXCEPTION), | |
| [counter] "r" (counter) | |
| : "cr0", "ctr", "v10", "vs0", "vs10", "vs3", "vs32", "vs33", | |
| "vs34", "fr10" | |
| ); | |
| /* | |
| * Check if we were expecting a failure and it did not occur by checking | |
| * CR0 state just after we leave the transaction. Either way we check if | |
| * vs0 or vs32 got corrupted. | |
| */ | |
| if (expecting_failure() && !is_failure(cr_)) { | |
| printf("\n\tExpecting the transaction to fail, %s", | |
| "but it didn't\n\t"); | |
| flags.result++; | |
| } | |
| /* Check if we were not expecting a failure and a it occurred. */ | |
| if (!expecting_failure() && is_failure(cr_) && | |
| !failure_is_reschedule()) { | |
| printf("\n\tUnexpected transaction failure 0x%02lx\n\t", | |
| failure_code()); | |
| return (void *) -1; | |
| } | |
| /* | |
| * Check if TM failed due to the cause we were expecting. 0xda is a | |
| * TM_CAUSE_FAC_UNAV cause, otherwise it's an unexpected cause, unless | |
| * it was caused by a reschedule. | |
| */ | |
| if (is_failure(cr_) && !failure_is_unavailable() && | |
| !failure_is_reschedule()) { | |
| printf("\n\tUnexpected failure cause 0x%02lx\n\t", | |
| failure_code()); | |
| return (void *) -1; | |
| } | |
| /* 0x4 is a success and 0xa is a fail. See comment in is_failure(). */ | |
| if (DEBUG) | |
| printf("CR0: 0x%1lx ", cr_ >> 28); | |
| /* Check FP (vs0) for the expected value. */ | |
| if (high_vs0 != 0x5555555555555555 || low_vs0 != 0xFFFFFFFFFFFFFFFF) { | |
| printf("FP corrupted!"); | |
| printf(" high = %#16" PRIx64 " low = %#16" PRIx64 " ", | |
| high_vs0, low_vs0); | |
| flags.result++; | |
| } else | |
| printf("FP ok "); | |
| /* Check VEC (vs32) for the expected value. */ | |
| if (high_vs32 != 0x5555555555555555 || low_vs32 != 0xFFFFFFFFFFFFFFFF) { | |
| printf("VEC corrupted!"); | |
| printf(" high = %#16" PRIx64 " low = %#16" PRIx64, | |
| high_vs32, low_vs32); | |
| flags.result++; | |
| } else | |
| printf("VEC ok"); | |
| putchar('\n'); | |
| return NULL; | |
| } | |
| /* Thread to force context switch */ | |
| void *tm_una_pong(void *not_used) | |
| { | |
| /* Wait thread get its name "pong". */ | |
| if (DEBUG) | |
| sleep(1); | |
| /* Classed as an interactive-like thread. */ | |
| while (1) | |
| sched_yield(); | |
| } | |
| /* Function that creates a thread and launches the "ping" task. */ | |
| void test_fp_vec(int fp, int vec, pthread_attr_t *attr) | |
| { | |
| int retries = 2; | |
| void *ret_value; | |
| pthread_t t0; | |
| flags.touch_fp = fp; | |
| flags.touch_vec = vec; | |
| /* | |
| * Without luck it's possible that the transaction is aborted not due to | |
| * the unavailable exception caught in the middle as we expect but also, | |
| * for instance, due to a context switch or due to a KVM reschedule (if | |
| * it's running on a VM). Thus we try a few times before giving up, | |
| * checking if the failure cause is the one we expect. | |
| */ | |
| do { | |
| int rc; | |
| /* Bind to CPU 0, as specified in 'attr'. */ | |
| rc = pthread_create(&t0, attr, tm_una_ping, (void *) &flags); | |
| if (rc) | |
| pr_err(rc, "pthread_create()"); | |
| rc = pthread_setname_np(t0, "tm_una_ping"); | |
| if (rc) | |
| pr_warn(rc, "pthread_setname_np"); | |
| rc = pthread_join(t0, &ret_value); | |
| if (rc) | |
| pr_err(rc, "pthread_join"); | |
| retries--; | |
| } while (ret_value != NULL && retries); | |
| if (!retries) { | |
| flags.result = 1; | |
| if (DEBUG) | |
| printf("All transactions failed unexpectedly\n"); | |
| } | |
| } | |
| int tm_unavailable_test(void) | |
| { | |
| int cpu, rc, exception; /* FP = 0, VEC = 1, VSX = 2 */ | |
| pthread_t t1; | |
| pthread_attr_t attr; | |
| cpu_set_t cpuset; | |
| SKIP_IF(!have_htm()); | |
| SKIP_IF(htm_is_synthetic()); | |
| cpu = pick_online_cpu(); | |
| FAIL_IF(cpu < 0); | |
| // Set only one CPU in the mask. Both threads will be bound to that CPU. | |
| CPU_ZERO(&cpuset); | |
| CPU_SET(cpu, &cpuset); | |
| /* Init pthread attribute. */ | |
| rc = pthread_attr_init(&attr); | |
| if (rc) | |
| pr_err(rc, "pthread_attr_init()"); | |
| /* Set CPU 0 mask into the pthread attribute. */ | |
| rc = pthread_attr_setaffinity_np(&attr, sizeof(cpu_set_t), &cpuset); | |
| if (rc) | |
| pr_err(rc, "pthread_attr_setaffinity_np()"); | |
| rc = pthread_create(&t1, &attr /* Bind to CPU 0 */, tm_una_pong, NULL); | |
| if (rc) | |
| pr_err(rc, "pthread_create()"); | |
| /* Name it for systemtap convenience */ | |
| rc = pthread_setname_np(t1, "tm_una_pong"); | |
| if (rc) | |
| pr_warn(rc, "pthread_create()"); | |
| flags.result = 0; | |
| for (exception = 0; exception < NUM_EXCEPTIONS; exception++) { | |
| printf("Checking if FP/VEC registers are sane after"); | |
| if (exception == FP_UNA_EXCEPTION) | |
| printf(" a FP unavailable exception...\n"); | |
| else if (exception == VEC_UNA_EXCEPTION) | |
| printf(" a VEC unavailable exception...\n"); | |
| else | |
| printf(" a VSX unavailable exception...\n"); | |
| flags.exception = exception; | |
| test_fp_vec(0, 0, &attr); | |
| test_fp_vec(1, 0, &attr); | |
| test_fp_vec(0, 1, &attr); | |
| test_fp_vec(1, 1, &attr); | |
| } | |
| if (flags.result > 0) { | |
| printf("result: failed!\n"); | |
| exit(1); | |
| } else { | |
| printf("result: success\n"); | |
| exit(0); | |
| } | |
| } | |
| int main(int argc, char **argv) | |
| { | |
| test_harness_set_timeout(220); | |
| return test_harness(tm_unavailable_test, "tm_unavailable_test"); | |
| } |