| # SPDX-License-Identifier: GPL-2.0-only | |
| menu "SoC Audio for Freescale CPUs" | |
| comment "Common SoC Audio options for Freescale CPUs:" | |
| config SND_SOC_FSL_ASRC | |
| tristate "Asynchronous Sample Rate Converter (ASRC) module support" | |
| depends on HAS_DMA | |
| select REGMAP_MMIO | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| help | |
| Say Y if you want to add Asynchronous Sample Rate Converter (ASRC) | |
| support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_FSL_SAI | |
| tristate "Synchronous Audio Interface (SAI) module support" | |
| select REGMAP_MMIO | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| select SND_SOC_FSL_UTILS | |
| help | |
| Say Y if you want to add Synchronous Audio Interface (SAI) | |
| support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_FSL_MQS | |
| tristate "Medium Quality Sound (MQS) module support" | |
| depends on SND_SOC_FSL_SAI | |
| select REGMAP_MMIO | |
| help | |
| Say Y if you want to add Medium Quality Sound (MQS) | |
| support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_FSL_AUDMIX | |
| tristate "Audio Mixer (AUDMIX) module support" | |
| select REGMAP_MMIO | |
| help | |
| Say Y if you want to add Audio Mixer (AUDMIX) | |
| support for the NXP iMX CPUs. | |
| config SND_SOC_FSL_SSI | |
| tristate "Synchronous Serial Interface module (SSI) support" | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC) | |
| select REGMAP_MMIO | |
| help | |
| Say Y if you want to add Synchronous Serial Interface (SSI) | |
| support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_FSL_SPDIF | |
| tristate "Sony/Philips Digital Interface (S/PDIF) module support" | |
| select REGMAP_MMIO | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC) | |
| select BITREVERSE | |
| select SND_SOC_FSL_UTILS | |
| help | |
| Say Y if you want to add Sony/Philips Digital Interface (SPDIF) | |
| support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_FSL_ESAI | |
| tristate "Enhanced Serial Audio Interface (ESAI) module support" | |
| select REGMAP_MMIO | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| help | |
| Say Y if you want to add Enhanced Synchronous Audio Interface | |
| (ESAI) support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_FSL_MICFIL | |
| tristate "Pulse Density Modulation Microphone Interface (MICFIL) module support" | |
| select REGMAP_MMIO | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| select SND_SOC_FSL_UTILS | |
| help | |
| Say Y if you want to add Pulse Density Modulation microphone | |
| interface (MICFIL) support for NXP. | |
| config SND_SOC_FSL_EASRC | |
| tristate "Enhanced Asynchronous Sample Rate Converter (EASRC) module support" | |
| depends on SND_SOC_FSL_ASRC | |
| select REGMAP_MMIO | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| help | |
| Say Y if you want to add Enhanced ASRC support for NXP. The ASRC is | |
| a digital module that converts audio from a source sample rate to a | |
| destination sample rate. It is a new design module compare with the | |
| old ASRC. | |
| config SND_SOC_FSL_XCVR | |
| tristate "NXP Audio Transceiver (XCVR) module support" | |
| select REGMAP_MMIO | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| help | |
| Say Y if you want to add Audio Transceiver (XCVR) support for NXP | |
| iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC, | |
| HDMI1.4 ARC and SPDIF. | |
| config SND_SOC_FSL_AUD2HTX | |
| tristate "AUDIO TO HDMI TX module support" | |
| depends on ARCH_MXC || COMPILE_TEST | |
| select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n | |
| help | |
| Say Y if you want to add AUDIO TO HDMI TX support for NXP. | |
| config SND_SOC_FSL_UTILS | |
| tristate | |
| config SND_SOC_FSL_RPMSG | |
| tristate "NXP Audio Base On RPMSG support" | |
| depends on COMMON_CLK | |
| depends on RPMSG | |
| depends on SND_IMX_SOC || SND_IMX_SOC = n | |
| select SND_SOC_IMX_RPMSG if SND_IMX_SOC != n | |
| help | |
| Say Y if you want to add rpmsg audio support for the Freescale CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_SOC_IMX_PCM_DMA | |
| tristate | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| config SND_SOC_IMX_AUDIO_RPMSG | |
| tristate | |
| depends on RPMSG | |
| config SND_SOC_IMX_PCM_RPMSG | |
| tristate | |
| depends on SND_SOC_IMX_AUDIO_RPMSG | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| config SND_SOC_IMX_AUDMUX | |
| tristate "Digital Audio Mux module support" | |
| help | |
| Say Y if you want to add Digital Audio Mux (AUDMUX) support | |
| for the ARM i.MX CPUs. | |
| This option is only useful for out-of-tree drivers since | |
| in-tree drivers select it automatically. | |
| config SND_POWERPC_SOC | |
| tristate "SoC Audio for Freescale PowerPC CPUs" | |
| depends on FSL_SOC || PPC_MPC52xx | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the PowerPC CPUs. | |
| config SND_IMX_SOC | |
| tristate "SoC Audio for Freescale i.MX CPUs" | |
| depends on ARCH_MXC || COMPILE_TEST | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the i.MX CPUs. | |
| if SND_POWERPC_SOC | |
| config SND_MPC52xx_DMA | |
| tristate | |
| config SND_SOC_POWERPC_DMA | |
| tristate | |
| comment "SoC Audio support for Freescale PPC boards:" | |
| config SND_SOC_MPC8610_HPCD | |
| tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" | |
| # I2C is necessary for the CS4270 driver | |
| depends on MPC8610_HPCD && I2C | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_POWERPC_DMA | |
| select SND_SOC_CS4270 | |
| select SND_SOC_CS4270_VD33_ERRATA | |
| default y if MPC8610_HPCD | |
| help | |
| Say Y if you want to enable audio on the Freescale MPC8610 HPCD. | |
| config SND_SOC_P1022_DS | |
| tristate "ALSA SoC support for the Freescale P1022 DS board" | |
| # I2C is necessary for the WM8776 driver | |
| depends on P1022_DS && I2C | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_POWERPC_DMA | |
| select SND_SOC_WM8776 | |
| default y if P1022_DS | |
| help | |
| Say Y if you want to enable audio on the Freescale P1022 DS board. | |
| This will also include the Wolfson Microelectronics WM8776 codec | |
| driver. | |
| config SND_SOC_P1022_RDK | |
| tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board" | |
| # I2C is necessary for the WM8960 driver | |
| depends on P1022_RDK && I2C | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_POWERPC_DMA | |
| select SND_SOC_WM8960 | |
| default y if P1022_RDK | |
| help | |
| Say Y if you want to enable audio on the Freescale / iVeia | |
| P1022 RDK board. This will also include the Wolfson | |
| Microelectronics WM8960 codec driver. | |
| config SND_SOC_MPC5200_I2S | |
| tristate "Freescale MPC5200 PSC in I2S mode driver" | |
| depends on PPC_MPC52xx && PPC_BESTCOMM | |
| select SND_MPC52xx_DMA | |
| select PPC_BESTCOMM_GEN_BD | |
| help | |
| Say Y here to support the MPC5200 PSCs in I2S mode. | |
| config SND_SOC_MPC5200_AC97 | |
| tristate "Freescale MPC5200 PSC in AC97 mode driver" | |
| depends on PPC_MPC52xx && PPC_BESTCOMM | |
| select SND_SOC_AC97_BUS | |
| select SND_MPC52xx_DMA | |
| select PPC_BESTCOMM_GEN_BD | |
| help | |
| Say Y here to support the MPC5200 PSCs in AC97 mode. | |
| config SND_MPC52xx_SOC_PCM030 | |
| tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712" | |
| depends on PPC_MPC5200_SIMPLE | |
| select SND_SOC_MPC5200_AC97 | |
| select SND_SOC_WM9712 | |
| help | |
| Say Y if you want to add support for sound on the Phytec pcm030 | |
| baseboard. | |
| config SND_MPC52xx_SOC_EFIKA | |
| tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" | |
| depends on PPC_EFIKA | |
| select SND_SOC_MPC5200_AC97 | |
| select SND_SOC_STAC9766 | |
| help | |
| Say Y if you want to add support for sound on the Efika. | |
| endif # SND_POWERPC_SOC | |
| config SND_SOC_IMX_PCM_FIQ | |
| tristate | |
| default y if (SND_SOC_FSL_SSI=m || SND_SOC_FSL_SPDIF=m) && (MXC_TZIC || MXC_AVIC) | |
| select FIQ | |
| if SND_IMX_SOC | |
| comment "SoC Audio support for Freescale i.MX boards:" | |
| config SND_SOC_EUKREA_TLV320 | |
| tristate "Eukrea TLV320" | |
| depends on ARCH_MXC && !ARM64 && I2C | |
| select SND_SOC_TLV320AIC23_I2C | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_IMX_PCM_DMA | |
| help | |
| Enable I2S based access to the TLV320AIC23B codec attached | |
| to the SSI interface | |
| config SND_SOC_IMX_ES8328 | |
| tristate "SoC Audio support for i.MX boards with the ES8328 codec" | |
| depends on OF && (I2C || SPI) | |
| select SND_SOC_ES8328_I2C if I2C | |
| select SND_SOC_ES8328_SPI if SPI_MASTER | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_FSL_SSI | |
| help | |
| Say Y if you want to add support for the ES8328 audio codec connected | |
| via SSI/I2S over either SPI or I2C. | |
| config SND_SOC_IMX_SGTL5000 | |
| tristate "SoC Audio support for i.MX boards with sgtl5000" | |
| depends on OF && I2C | |
| select SND_SOC_SGTL5000 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_FSL_SSI | |
| help | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a sgtl5000 codec. | |
| config SND_SOC_IMX_SPDIF | |
| tristate "SoC Audio support for i.MX boards with S/PDIF" | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_SPDIF | |
| help | |
| SoC Audio support for i.MX boards with S/PDIF | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a S/DPDIF. | |
| config SND_SOC_FSL_ASOC_CARD | |
| tristate "Generic ASoC Sound Card with ASRC support" | |
| depends on OF && I2C | |
| # enforce SND_SOC_FSL_ASOC_CARD=m if SND_AC97_CODEC=m: | |
| depends on SND_AC97_CODEC || SND_AC97_CODEC=n | |
| select SND_SIMPLE_CARD_UTILS | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_ESAI | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_TLV320AIC31XX | |
| select SND_SOC_WM8994 | |
| select MFD_WM8994 | |
| help | |
| ALSA SoC Audio support with ASRC feature for Freescale SoCs that have | |
| ESAI/SAI/SSI and connect with external CODECs such as WM8962, CS42888, | |
| CS4271, CS4272, SGTL5000 and TLV320AIC32x4. | |
| Say Y if you want to add support for Freescale Generic ASoC Sound Card. | |
| config SND_SOC_IMX_AUDMIX | |
| tristate "SoC Audio support for i.MX boards with AUDMIX" | |
| select SND_SOC_FSL_AUDMIX | |
| select SND_SOC_FSL_SAI | |
| help | |
| SoC Audio support for i.MX boards with Audio Mixer | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| an Audio Mixer. | |
| config SND_SOC_IMX_HDMI | |
| tristate "SoC Audio support for i.MX boards with HDMI port" | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_FSL_AUD2HTX | |
| select SND_SOC_HDMI_CODEC | |
| help | |
| ALSA SoC Audio support with HDMI feature for Freescale SoCs that have | |
| SAI/AUD2HTX and connect with internal HDMI IP or external module | |
| SII902X. | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| IMX HDMI. | |
| config SND_SOC_IMX_RPMSG | |
| tristate "SoC Audio support for i.MX boards with rpmsg" | |
| depends on RPMSG | |
| select SND_SOC_IMX_PCM_RPMSG | |
| select SND_SOC_IMX_AUDIO_RPMSG | |
| help | |
| SoC Audio support for i.MX boards with rpmsg. | |
| There should be rpmsg devices defined in other core (M core) | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a rpmsg devices. | |
| config SND_SOC_IMX_CARD | |
| tristate "SoC Audio Graph Sound Card support for i.MX boards" | |
| depends on OF && I2C | |
| select SND_SOC_AK4458 | |
| select SND_SOC_AK5558 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_SAI | |
| select SND_SIMPLE_CARD_UTILS | |
| help | |
| This option enables audio sound card support for i.MX boards | |
| with OF-graph DT bindings. | |
| It also support DPCM of single CPU multi Codec ststem. | |
| endif # SND_IMX_SOC | |
| endmenu |