| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015-2018 Oracle. All rights reserved. |
| * |
| * Support for reverse-direction RPCs on RPC/RDMA (server-side). |
| */ |
| |
| #include <linux/sunrpc/svc_rdma.h> |
| |
| #include "xprt_rdma.h" |
| #include <trace/events/rpcrdma.h> |
| |
| /** |
| * svc_rdma_handle_bc_reply - Process incoming backchannel Reply |
| * @rqstp: resources for handling the Reply |
| * @rctxt: Received message |
| * |
| */ |
| void svc_rdma_handle_bc_reply(struct svc_rqst *rqstp, |
| struct svc_rdma_recv_ctxt *rctxt) |
| { |
| struct svc_xprt *sxprt = rqstp->rq_xprt; |
| struct rpc_xprt *xprt = sxprt->xpt_bc_xprt; |
| struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt); |
| struct xdr_buf *rcvbuf = &rqstp->rq_arg; |
| struct kvec *dst, *src = &rcvbuf->head[0]; |
| __be32 *rdma_resp = rctxt->rc_recv_buf; |
| struct rpc_rqst *req; |
| u32 credits; |
| |
| spin_lock(&xprt->queue_lock); |
| req = xprt_lookup_rqst(xprt, *rdma_resp); |
| if (!req) |
| goto out_unlock; |
| |
| dst = &req->rq_private_buf.head[0]; |
| memcpy(&req->rq_private_buf, &req->rq_rcv_buf, sizeof(struct xdr_buf)); |
| if (dst->iov_len < src->iov_len) |
| goto out_unlock; |
| memcpy(dst->iov_base, src->iov_base, src->iov_len); |
| xprt_pin_rqst(req); |
| spin_unlock(&xprt->queue_lock); |
| |
| credits = be32_to_cpup(rdma_resp + 2); |
| if (credits == 0) |
| credits = 1; /* don't deadlock */ |
| else if (credits > r_xprt->rx_buf.rb_bc_max_requests) |
| credits = r_xprt->rx_buf.rb_bc_max_requests; |
| spin_lock(&xprt->transport_lock); |
| xprt->cwnd = credits << RPC_CWNDSHIFT; |
| spin_unlock(&xprt->transport_lock); |
| |
| spin_lock(&xprt->queue_lock); |
| xprt_complete_rqst(req->rq_task, rcvbuf->len); |
| xprt_unpin_rqst(req); |
| rcvbuf->len = 0; |
| |
| out_unlock: |
| spin_unlock(&xprt->queue_lock); |
| } |
| |
| /* Send a reverse-direction RPC Call. |
| * |
| * Caller holds the connection's mutex and has already marshaled |
| * the RPC/RDMA request. |
| * |
| * This is similar to svc_rdma_send_reply_msg, but takes a struct |
| * rpc_rqst instead, does not support chunks, and avoids blocking |
| * memory allocation. |
| * |
| * XXX: There is still an opportunity to block in svc_rdma_send() |
| * if there are no SQ entries to post the Send. This may occur if |
| * the adapter has a small maximum SQ depth. |
| */ |
| static int svc_rdma_bc_sendto(struct svcxprt_rdma *rdma, |
| struct rpc_rqst *rqst, |
| struct svc_rdma_send_ctxt *sctxt) |
| { |
| struct svc_rdma_recv_ctxt *rctxt; |
| int ret; |
| |
| rctxt = svc_rdma_recv_ctxt_get(rdma); |
| if (!rctxt) |
| return -EIO; |
| |
| ret = svc_rdma_map_reply_msg(rdma, sctxt, rctxt, &rqst->rq_snd_buf); |
| svc_rdma_recv_ctxt_put(rdma, rctxt); |
| if (ret < 0) |
| return -EIO; |
| |
| /* Bump page refcnt so Send completion doesn't release |
| * the rq_buffer before all retransmits are complete. |
| */ |
| get_page(virt_to_page(rqst->rq_buffer)); |
| sctxt->sc_send_wr.opcode = IB_WR_SEND; |
| ret = svc_rdma_send(rdma, sctxt); |
| if (ret < 0) |
| return ret; |
| |
| ret = wait_for_completion_killable(&sctxt->sc_done); |
| svc_rdma_send_ctxt_put(rdma, sctxt); |
| return ret; |
| } |
| |
| /* Server-side transport endpoint wants a whole page for its send |
| * buffer. The client RPC code constructs the RPC header in this |
| * buffer before it invokes ->send_request. |
| */ |
| static int |
| xprt_rdma_bc_allocate(struct rpc_task *task) |
| { |
| struct rpc_rqst *rqst = task->tk_rqstp; |
| size_t size = rqst->rq_callsize; |
| struct page *page; |
| |
| if (size > PAGE_SIZE) { |
| WARN_ONCE(1, "svcrdma: large bc buffer request (size %zu)\n", |
| size); |
| return -EINVAL; |
| } |
| |
| page = alloc_page(RPCRDMA_DEF_GFP); |
| if (!page) |
| return -ENOMEM; |
| rqst->rq_buffer = page_address(page); |
| |
| rqst->rq_rbuffer = kmalloc(rqst->rq_rcvsize, RPCRDMA_DEF_GFP); |
| if (!rqst->rq_rbuffer) { |
| put_page(page); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static void |
| xprt_rdma_bc_free(struct rpc_task *task) |
| { |
| struct rpc_rqst *rqst = task->tk_rqstp; |
| |
| put_page(virt_to_page(rqst->rq_buffer)); |
| kfree(rqst->rq_rbuffer); |
| } |
| |
| static int |
| rpcrdma_bc_send_request(struct svcxprt_rdma *rdma, struct rpc_rqst *rqst) |
| { |
| struct rpc_xprt *xprt = rqst->rq_xprt; |
| struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt); |
| struct svc_rdma_send_ctxt *ctxt; |
| __be32 *p; |
| int rc; |
| |
| ctxt = svc_rdma_send_ctxt_get(rdma); |
| if (!ctxt) |
| goto drop_connection; |
| |
| p = xdr_reserve_space(&ctxt->sc_stream, RPCRDMA_HDRLEN_MIN); |
| if (!p) |
| goto put_ctxt; |
| *p++ = rqst->rq_xid; |
| *p++ = rpcrdma_version; |
| *p++ = cpu_to_be32(r_xprt->rx_buf.rb_bc_max_requests); |
| *p++ = rdma_msg; |
| *p++ = xdr_zero; |
| *p++ = xdr_zero; |
| *p = xdr_zero; |
| |
| rqst->rq_xtime = ktime_get(); |
| rc = svc_rdma_bc_sendto(rdma, rqst, ctxt); |
| if (rc) |
| goto put_ctxt; |
| return 0; |
| |
| put_ctxt: |
| svc_rdma_send_ctxt_put(rdma, ctxt); |
| |
| drop_connection: |
| return -ENOTCONN; |
| } |
| |
| /** |
| * xprt_rdma_bc_send_request - Send a reverse-direction Call |
| * @rqst: rpc_rqst containing Call message to be sent |
| * |
| * Return values: |
| * %0 if the message was sent successfully |
| * %ENOTCONN if the message was not sent |
| */ |
| static int xprt_rdma_bc_send_request(struct rpc_rqst *rqst) |
| { |
| struct svc_xprt *sxprt = rqst->rq_xprt->bc_xprt; |
| struct svcxprt_rdma *rdma = |
| container_of(sxprt, struct svcxprt_rdma, sc_xprt); |
| int ret; |
| |
| if (test_bit(XPT_DEAD, &sxprt->xpt_flags)) |
| return -ENOTCONN; |
| |
| ret = rpcrdma_bc_send_request(rdma, rqst); |
| if (ret == -ENOTCONN) |
| svc_xprt_close(sxprt); |
| return ret; |
| } |
| |
| static void |
| xprt_rdma_bc_close(struct rpc_xprt *xprt) |
| { |
| xprt_disconnect_done(xprt); |
| xprt->cwnd = RPC_CWNDSHIFT; |
| } |
| |
| static void |
| xprt_rdma_bc_put(struct rpc_xprt *xprt) |
| { |
| xprt_rdma_free_addresses(xprt); |
| xprt_free(xprt); |
| } |
| |
| static const struct rpc_xprt_ops xprt_rdma_bc_procs = { |
| .reserve_xprt = xprt_reserve_xprt_cong, |
| .release_xprt = xprt_release_xprt_cong, |
| .alloc_slot = xprt_alloc_slot, |
| .free_slot = xprt_free_slot, |
| .release_request = xprt_release_rqst_cong, |
| .buf_alloc = xprt_rdma_bc_allocate, |
| .buf_free = xprt_rdma_bc_free, |
| .send_request = xprt_rdma_bc_send_request, |
| .wait_for_reply_request = xprt_wait_for_reply_request_def, |
| .close = xprt_rdma_bc_close, |
| .destroy = xprt_rdma_bc_put, |
| .print_stats = xprt_rdma_print_stats |
| }; |
| |
| static const struct rpc_timeout xprt_rdma_bc_timeout = { |
| .to_initval = 60 * HZ, |
| .to_maxval = 60 * HZ, |
| }; |
| |
| /* It shouldn't matter if the number of backchannel session slots |
| * doesn't match the number of RPC/RDMA credits. That just means |
| * one or the other will have extra slots that aren't used. |
| */ |
| static struct rpc_xprt * |
| xprt_setup_rdma_bc(struct xprt_create *args) |
| { |
| struct rpc_xprt *xprt; |
| struct rpcrdma_xprt *new_xprt; |
| |
| if (args->addrlen > sizeof(xprt->addr)) |
| return ERR_PTR(-EBADF); |
| |
| xprt = xprt_alloc(args->net, sizeof(*new_xprt), |
| RPCRDMA_MAX_BC_REQUESTS, |
| RPCRDMA_MAX_BC_REQUESTS); |
| if (!xprt) |
| return ERR_PTR(-ENOMEM); |
| |
| xprt->timeout = &xprt_rdma_bc_timeout; |
| xprt_set_bound(xprt); |
| xprt_set_connected(xprt); |
| xprt->bind_timeout = 0; |
| xprt->reestablish_timeout = 0; |
| xprt->idle_timeout = 0; |
| |
| xprt->prot = XPRT_TRANSPORT_BC_RDMA; |
| xprt->ops = &xprt_rdma_bc_procs; |
| |
| memcpy(&xprt->addr, args->dstaddr, args->addrlen); |
| xprt->addrlen = args->addrlen; |
| xprt_rdma_format_addresses(xprt, (struct sockaddr *)&xprt->addr); |
| xprt->resvport = 0; |
| |
| xprt->max_payload = xprt_rdma_max_inline_read; |
| |
| new_xprt = rpcx_to_rdmax(xprt); |
| new_xprt->rx_buf.rb_bc_max_requests = xprt->max_reqs; |
| |
| xprt_get(xprt); |
| args->bc_xprt->xpt_bc_xprt = xprt; |
| xprt->bc_xprt = args->bc_xprt; |
| |
| /* Final put for backchannel xprt is in __svc_rdma_free */ |
| xprt_get(xprt); |
| return xprt; |
| } |
| |
| struct xprt_class xprt_rdma_bc = { |
| .list = LIST_HEAD_INIT(xprt_rdma_bc.list), |
| .name = "rdma backchannel", |
| .owner = THIS_MODULE, |
| .ident = XPRT_TRANSPORT_BC_RDMA, |
| .setup = xprt_setup_rdma_bc, |
| }; |