| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2004, Instant802 Networks, Inc. |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright (C) 2022 Intel Corporation |
| */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/module.h> |
| #include <linux/if_arp.h> |
| #include <linux/types.h> |
| #include <net/ip.h> |
| #include <net/pkt_sched.h> |
| |
| #include <net/mac80211.h> |
| #include "ieee80211_i.h" |
| #include "wme.h" |
| |
| /* Default mapping in classifier to work with default |
| * queue setup. |
| */ |
| const int ieee802_1d_to_ac[8] = { |
| IEEE80211_AC_BE, |
| IEEE80211_AC_BK, |
| IEEE80211_AC_BK, |
| IEEE80211_AC_BE, |
| IEEE80211_AC_VI, |
| IEEE80211_AC_VI, |
| IEEE80211_AC_VO, |
| IEEE80211_AC_VO |
| }; |
| |
| static int wme_downgrade_ac(struct sk_buff *skb) |
| { |
| switch (skb->priority) { |
| case 6: |
| case 7: |
| skb->priority = 5; /* VO -> VI */ |
| return 0; |
| case 4: |
| case 5: |
| skb->priority = 3; /* VI -> BE */ |
| return 0; |
| case 0: |
| case 3: |
| skb->priority = 2; /* BE -> BK */ |
| return 0; |
| default: |
| return -1; |
| } |
| } |
| |
| /** |
| * ieee80211_fix_reserved_tid - return the TID to use if this one is reserved |
| * @tid: the assumed-reserved TID |
| * |
| * Returns: the alternative TID to use, or 0 on error |
| */ |
| static inline u8 ieee80211_fix_reserved_tid(u8 tid) |
| { |
| switch (tid) { |
| case 0: |
| return 3; |
| case 1: |
| return 2; |
| case 2: |
| return 1; |
| case 3: |
| return 0; |
| case 4: |
| return 5; |
| case 5: |
| return 4; |
| case 6: |
| return 7; |
| case 7: |
| return 6; |
| } |
| |
| return 0; |
| } |
| |
| static u16 ieee80211_downgrade_queue(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, struct sk_buff *skb) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| /* in case we are a client verify acm is not set for this ac */ |
| while (sdata->wmm_acm & BIT(skb->priority)) { |
| int ac = ieee802_1d_to_ac[skb->priority]; |
| |
| if (ifmgd->tx_tspec[ac].admitted_time && |
| skb->priority == ifmgd->tx_tspec[ac].up) |
| return ac; |
| |
| if (wme_downgrade_ac(skb)) { |
| /* |
| * This should not really happen. The AP has marked all |
| * lower ACs to require admission control which is not |
| * a reasonable configuration. Allow the frame to be |
| * transmitted using AC_BK as a workaround. |
| */ |
| break; |
| } |
| } |
| |
| /* Check to see if this is a reserved TID */ |
| if (sta && sta->reserved_tid == skb->priority) |
| skb->priority = ieee80211_fix_reserved_tid(skb->priority); |
| |
| /* look up which queue to use for frames with this 1d tag */ |
| return ieee802_1d_to_ac[skb->priority]; |
| } |
| |
| /* Indicate which queue to use for this fully formed 802.11 frame */ |
| u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, |
| struct ieee80211_hdr *hdr) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| u8 *p; |
| |
| if ((info->control.flags & IEEE80211_TX_CTRL_DONT_REORDER) || |
| local->hw.queues < IEEE80211_NUM_ACS) |
| return 0; |
| |
| if (!ieee80211_is_data(hdr->frame_control)) { |
| skb->priority = 7; |
| return ieee802_1d_to_ac[skb->priority]; |
| } |
| if (!ieee80211_is_data_qos(hdr->frame_control)) { |
| skb->priority = 0; |
| return ieee802_1d_to_ac[skb->priority]; |
| } |
| |
| p = ieee80211_get_qos_ctl(hdr); |
| skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK; |
| |
| return ieee80211_downgrade_queue(sdata, NULL, skb); |
| } |
| |
| u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, struct sk_buff *skb) |
| { |
| struct mac80211_qos_map *qos_map; |
| bool qos; |
| |
| /* all mesh/ocb stations are required to support WME */ |
| if (sta && (sdata->vif.type == NL80211_IFTYPE_MESH_POINT || |
| sdata->vif.type == NL80211_IFTYPE_OCB)) |
| qos = true; |
| else if (sta) |
| qos = sta->sta.wme; |
| else |
| qos = false; |
| |
| if (!qos) { |
| skb->priority = 0; /* required for correct WPA/11i MIC */ |
| return IEEE80211_AC_BE; |
| } |
| |
| if (skb->protocol == sdata->control_port_protocol) { |
| skb->priority = 7; |
| goto downgrade; |
| } |
| |
| /* use the data classifier to determine what 802.1d tag the |
| * data frame has */ |
| qos_map = rcu_dereference(sdata->qos_map); |
| skb->priority = cfg80211_classify8021d(skb, qos_map ? |
| &qos_map->qos_map : NULL); |
| |
| downgrade: |
| return ieee80211_downgrade_queue(sdata, sta, skb); |
| } |
| |
| |
| /* Indicate which queue to use. */ |
| u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta = NULL; |
| const u8 *ra = NULL; |
| u16 ret; |
| |
| /* when using iTXQ, we can do this later */ |
| if (local->ops->wake_tx_queue) |
| return 0; |
| |
| if (local->hw.queues < IEEE80211_NUM_ACS || skb->len < 6) { |
| skb->priority = 0; /* required for correct WPA/11i MIC */ |
| return 0; |
| } |
| |
| rcu_read_lock(); |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_AP_VLAN: |
| sta = rcu_dereference(sdata->u.vlan.sta); |
| if (sta) |
| break; |
| fallthrough; |
| case NL80211_IFTYPE_AP: |
| ra = skb->data; |
| break; |
| case NL80211_IFTYPE_STATION: |
| /* might be a TDLS station */ |
| sta = sta_info_get(sdata, skb->data); |
| if (sta) |
| break; |
| |
| ra = sdata->deflink.u.mgd.bssid; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| ra = skb->data; |
| break; |
| default: |
| break; |
| } |
| |
| if (!sta && ra && !is_multicast_ether_addr(ra)) |
| sta = sta_info_get(sdata, ra); |
| |
| ret = __ieee80211_select_queue(sdata, sta, skb); |
| |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * ieee80211_set_qos_hdr - Fill in the QoS header if there is one. |
| * |
| * @sdata: local subif |
| * @skb: packet to be updated |
| */ |
| void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (void *)skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| u8 flags; |
| u8 *p; |
| |
| if (!ieee80211_is_data_qos(hdr->frame_control)) |
| return; |
| |
| p = ieee80211_get_qos_ctl(hdr); |
| |
| /* don't overwrite the QoS field of injected frames */ |
| if (info->flags & IEEE80211_TX_CTL_INJECTED) { |
| /* do take into account Ack policy of injected frames */ |
| if (*p & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; |
| return; |
| } |
| |
| /* set up the first byte */ |
| |
| /* |
| * preserve everything but the TID and ACK policy |
| * (which we both write here) |
| */ |
| flags = *p & ~(IEEE80211_QOS_CTL_TID_MASK | |
| IEEE80211_QOS_CTL_ACK_POLICY_MASK); |
| |
| if (is_multicast_ether_addr(hdr->addr1) || |
| sdata->noack_map & BIT(tid)) { |
| flags |= IEEE80211_QOS_CTL_ACK_POLICY_NOACK; |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; |
| } |
| |
| *p = flags | tid; |
| |
| /* set up the second byte */ |
| p++; |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| /* preserve RSPI and Mesh PS Level bit */ |
| *p &= ((IEEE80211_QOS_CTL_RSPI | |
| IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8); |
| |
| /* Nulls don't have a mesh header (frame body) */ |
| if (!ieee80211_is_qos_nullfunc(hdr->frame_control)) |
| *p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8); |
| } else { |
| *p = 0; |
| } |
| } |