| // SPDX-License-Identifier: GPL-2.0-only | |
| /* display7seg.c - Driver implementation for the 7-segment display | |
| * present on Sun Microsystems CP1400 and CP1500 | |
| * | |
| * Copyright (c) 2000 Eric Brower (ebrower@usa.net) | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/fs.h> | |
| #include <linux/errno.h> | |
| #include <linux/major.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/ioport.h> /* request_region */ | |
| #include <linux/slab.h> | |
| #include <linux/mutex.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/atomic.h> | |
| #include <linux/uaccess.h> /* put_/get_user */ | |
| #include <asm/io.h> | |
| #include <asm/display7seg.h> | |
| #define DRIVER_NAME "d7s" | |
| #define PFX DRIVER_NAME ": " | |
| static DEFINE_MUTEX(d7s_mutex); | |
| static int sol_compat = 0; /* Solaris compatibility mode */ | |
| /* Solaris compatibility flag - | |
| * The Solaris implementation omits support for several | |
| * documented driver features (ref Sun doc 806-0180-03). | |
| * By default, this module supports the documented driver | |
| * abilities, rather than the Solaris implementation: | |
| * | |
| * 1) Device ALWAYS reverts to OBP-specified FLIPPED mode | |
| * upon closure of device or module unload. | |
| * 2) Device ioctls D7SIOCRD/D7SIOCWR honor toggling of | |
| * FLIP bit | |
| * | |
| * If you wish the device to operate as under Solaris, | |
| * omitting above features, set this parameter to non-zero. | |
| */ | |
| module_param(sol_compat, int, 0); | |
| MODULE_PARM_DESC(sol_compat, | |
| "Disables documented functionality omitted from Solaris driver"); | |
| MODULE_AUTHOR("Eric Brower <ebrower@usa.net>"); | |
| MODULE_DESCRIPTION("7-Segment Display driver for Sun Microsystems CP1400/1500"); | |
| MODULE_LICENSE("GPL"); | |
| struct d7s { | |
| void __iomem *regs; | |
| bool flipped; | |
| }; | |
| struct d7s *d7s_device; | |
| /* | |
| * Register block address- see header for details | |
| * ----------------------------------------- | |
| * | DP | ALARM | FLIP | 4 | 3 | 2 | 1 | 0 | | |
| * ----------------------------------------- | |
| * | |
| * DP - Toggles decimal point on/off | |
| * ALARM - Toggles "Alarm" LED green/red | |
| * FLIP - Inverts display for upside-down mounted board | |
| * bits 0-4 - 7-segment display contents | |
| */ | |
| static atomic_t d7s_users = ATOMIC_INIT(0); | |
| static int d7s_open(struct inode *inode, struct file *f) | |
| { | |
| if (D7S_MINOR != iminor(inode)) | |
| return -ENODEV; | |
| atomic_inc(&d7s_users); | |
| return 0; | |
| } | |
| static int d7s_release(struct inode *inode, struct file *f) | |
| { | |
| /* Reset flipped state to OBP default only if | |
| * no other users have the device open and we | |
| * are not operating in solaris-compat mode | |
| */ | |
| if (atomic_dec_and_test(&d7s_users) && !sol_compat) { | |
| struct d7s *p = d7s_device; | |
| u8 regval = 0; | |
| regval = readb(p->regs); | |
| if (p->flipped) | |
| regval |= D7S_FLIP; | |
| else | |
| regval &= ~D7S_FLIP; | |
| writeb(regval, p->regs); | |
| } | |
| return 0; | |
| } | |
| static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| struct d7s *p = d7s_device; | |
| u8 regs = readb(p->regs); | |
| int error = 0; | |
| u8 ireg = 0; | |
| if (D7S_MINOR != iminor(file_inode(file))) | |
| return -ENODEV; | |
| mutex_lock(&d7s_mutex); | |
| switch (cmd) { | |
| case D7SIOCWR: | |
| /* assign device register values we mask-out D7S_FLIP | |
| * if in sol_compat mode | |
| */ | |
| if (get_user(ireg, (int __user *) arg)) { | |
| error = -EFAULT; | |
| break; | |
| } | |
| if (sol_compat) { | |
| if (regs & D7S_FLIP) | |
| ireg |= D7S_FLIP; | |
| else | |
| ireg &= ~D7S_FLIP; | |
| } | |
| writeb(ireg, p->regs); | |
| break; | |
| case D7SIOCRD: | |
| /* retrieve device register values | |
| * NOTE: Solaris implementation returns D7S_FLIP bit | |
| * as toggled by user, even though it does not honor it. | |
| * This driver will not misinform you about the state | |
| * of your hardware while in sol_compat mode | |
| */ | |
| if (put_user(regs, (int __user *) arg)) { | |
| error = -EFAULT; | |
| break; | |
| } | |
| break; | |
| case D7SIOCTM: | |
| /* toggle device mode-- flip display orientation */ | |
| regs ^= D7S_FLIP; | |
| writeb(regs, p->regs); | |
| break; | |
| } | |
| mutex_unlock(&d7s_mutex); | |
| return error; | |
| } | |
| static const struct file_operations d7s_fops = { | |
| .owner = THIS_MODULE, | |
| .unlocked_ioctl = d7s_ioctl, | |
| .compat_ioctl = compat_ptr_ioctl, | |
| .open = d7s_open, | |
| .release = d7s_release, | |
| .llseek = noop_llseek, | |
| }; | |
| static struct miscdevice d7s_miscdev = { | |
| .minor = D7S_MINOR, | |
| .name = DRIVER_NAME, | |
| .fops = &d7s_fops | |
| }; | |
| static int d7s_probe(struct platform_device *op) | |
| { | |
| struct device_node *opts; | |
| int err = -EINVAL; | |
| struct d7s *p; | |
| u8 regs; | |
| if (d7s_device) | |
| goto out; | |
| p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL); | |
| err = -ENOMEM; | |
| if (!p) | |
| goto out; | |
| p->regs = of_ioremap(&op->resource[0], 0, sizeof(u8), "d7s"); | |
| if (!p->regs) { | |
| printk(KERN_ERR PFX "Cannot map chip registers\n"); | |
| goto out; | |
| } | |
| err = misc_register(&d7s_miscdev); | |
| if (err) { | |
| printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n", | |
| D7S_MINOR); | |
| goto out_iounmap; | |
| } | |
| /* OBP option "d7s-flipped?" is honored as default for the | |
| * device, and reset default when detached | |
| */ | |
| regs = readb(p->regs); | |
| opts = of_find_node_by_path("/options"); | |
| if (opts && | |
| of_get_property(opts, "d7s-flipped?", NULL)) | |
| p->flipped = true; | |
| if (p->flipped) | |
| regs |= D7S_FLIP; | |
| else | |
| regs &= ~D7S_FLIP; | |
| writeb(regs, p->regs); | |
| printk(KERN_INFO PFX "7-Segment Display%pOF at [%s:0x%llx] %s\n", | |
| op->dev.of_node, | |
| (regs & D7S_FLIP) ? " (FLIPPED)" : "", | |
| op->resource[0].start, | |
| sol_compat ? "in sol_compat mode" : ""); | |
| dev_set_drvdata(&op->dev, p); | |
| d7s_device = p; | |
| err = 0; | |
| of_node_put(opts); | |
| out: | |
| return err; | |
| out_iounmap: | |
| of_iounmap(&op->resource[0], p->regs, sizeof(u8)); | |
| goto out; | |
| } | |
| static int d7s_remove(struct platform_device *op) | |
| { | |
| struct d7s *p = dev_get_drvdata(&op->dev); | |
| u8 regs = readb(p->regs); | |
| /* Honor OBP d7s-flipped? unless operating in solaris-compat mode */ | |
| if (sol_compat) { | |
| if (p->flipped) | |
| regs |= D7S_FLIP; | |
| else | |
| regs &= ~D7S_FLIP; | |
| writeb(regs, p->regs); | |
| } | |
| misc_deregister(&d7s_miscdev); | |
| of_iounmap(&op->resource[0], p->regs, sizeof(u8)); | |
| return 0; | |
| } | |
| static const struct of_device_id d7s_match[] = { | |
| { | |
| .name = "display7seg", | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, d7s_match); | |
| static struct platform_driver d7s_driver = { | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .of_match_table = d7s_match, | |
| }, | |
| .probe = d7s_probe, | |
| .remove = d7s_remove, | |
| }; | |
| module_platform_driver(d7s_driver); |