drivers/pwm/pwm-stmpe.c - third_party/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2016 Linaro Ltd.
  *
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */

 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/mfd/stmpe.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>

 #define STMPE24XX_PWMCS		0x30
 #define PWMCS_EN_PWM0		BIT(0)
 #define PWMCS_EN_PWM1		BIT(1)
 #define PWMCS_EN_PWM2		BIT(2)
 #define STMPE24XX_PWMIC0	0x38
 #define STMPE24XX_PWMIC1	0x39
 #define STMPE24XX_PWMIC2	0x3a

 #define STMPE_PWM_24XX_PINBASE	21

 struct stmpe_pwm {
 	struct stmpe *stmpe;
 	struct pwm_chip chip;
 	u8 last_duty;
 };

 static inline struct stmpe_pwm *to_stmpe_pwm(struct pwm_chip *chip)
 {
 	return container_of(chip, struct stmpe_pwm, chip);
 }

 static int stmpe_24xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
 	u8 value;
 	int ret;

 	ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
 	if (ret < 0) {
 		dev_err(chip->dev, "error reading PWM#%u control\n",
 			pwm->hwpwm);
 		return ret;
 	}

 	value = ret | BIT(pwm->hwpwm);

 	ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
 	if (ret) {
 		dev_err(chip->dev, "error writing PWM#%u control\n",
 			pwm->hwpwm);
 		return ret;
 	}

 	return 0;
 }

 static void stmpe_24xx_pwm_disable(struct pwm_chip *chip,
 				   struct pwm_device *pwm)
 {
 	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
 	u8 value;
 	int ret;

 	ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
 	if (ret < 0) {
 		dev_err(chip->dev, "error reading PWM#%u control\n",
 			pwm->hwpwm);
 		return;
 	}

 	value = ret & ~BIT(pwm->hwpwm);

 	ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
 	if (ret) {
 		dev_err(chip->dev, "error writing PWM#%u control\n",
 			pwm->hwpwm);
 		return;
 	}
 }

 /* STMPE 24xx PWM instructions */
 #define SMAX		0x007f
 #define SMIN		0x00ff
 #define GTS		0x0000
 #define LOAD		BIT(14) /* Only available on 2403 */
 #define RAMPUP		0x0000
 #define RAMPDOWN	BIT(7)
 #define PRESCALE_512	BIT(14)
 #define STEPTIME_1	BIT(8)
 #define BRANCH		(BIT(15) | BIT(13))

 static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 				 int duty_ns, int period_ns)
 {
 	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
 	unsigned int i, pin;
 	u16 program[3] = {
 		SMAX,
 		GTS,
 		GTS,
 	};
 	u8 offset;
 	int ret;

 	/* Make sure we are disabled */
 	if (pwm_is_enabled(pwm)) {
 		stmpe_24xx_pwm_disable(chip, pwm);
 	} else {
 		/* Connect the PWM to the pin */
 		pin = pwm->hwpwm;

 		/* On STMPE2401 and 2403 pins 21,22,23 are used */
 		if (stmpe_pwm->stmpe->partnum == STMPE2401 ||
 		    stmpe_pwm->stmpe->partnum == STMPE2403)
 			pin += STMPE_PWM_24XX_PINBASE;

 		ret = stmpe_set_altfunc(stmpe_pwm->stmpe, BIT(pin),
 					STMPE_BLOCK_PWM);
 		if (ret) {
 			dev_err(chip->dev, "unable to connect PWM#%u to pin\n",
 				pwm->hwpwm);
 			return ret;
 		}
 	}

 	/* STMPE24XX */
 	switch (pwm->hwpwm) {
 	case 0:
 		offset = STMPE24XX_PWMIC0;
 		break;

 	case 1:
 		offset = STMPE24XX_PWMIC1;
 		break;

 	case 2:
 		offset = STMPE24XX_PWMIC2;
 		break;

 	default:
 		/* Should not happen as npwm is 3 */
 		return -ENODEV;
 	}

 	dev_dbg(chip->dev, "PWM#%u: config duty %d ns, period %d ns\n",
 		pwm->hwpwm, duty_ns, period_ns);

 	if (duty_ns == 0) {
 		if (stmpe_pwm->stmpe->partnum == STMPE2401)
 			program[0] = SMAX; /* off all the time */

 		if (stmpe_pwm->stmpe->partnum == STMPE2403)
 			program[0] = LOAD | 0xff; /* LOAD 0xff */

 		stmpe_pwm->last_duty = 0x00;
 	} else if (duty_ns == period_ns) {
 		if (stmpe_pwm->stmpe->partnum == STMPE2401)
 			program[0] = SMIN; /* on all the time */

 		if (stmpe_pwm->stmpe->partnum == STMPE2403)
 			program[0] = LOAD | 0x00; /* LOAD 0x00 */

 		stmpe_pwm->last_duty = 0xff;
 	} else {
 		u8 value, last = stmpe_pwm->last_duty;
 		unsigned long duty;

 		/*
 		 * Counter goes from 0x00 to 0xff repeatedly at 32768 Hz,
 		 * (means a period of 30517 ns) then this is compared to the
 		 * counter from the ramp, if this is >= PWM counter the output
 		 * is high. With LOAD we can define how much of the cycle it
 		 * is on.
 		 *
 		 * Prescale = 0 -> 2 kHz -> T = 1/f = 488281.25 ns
 		 */

 		/* Scale to 0..0xff */
 		duty = duty_ns * 256;
 		duty = DIV_ROUND_CLOSEST(duty, period_ns);
 		value = duty;

 		if (value == last) {
 			/* Run the old program */
 			if (pwm_is_enabled(pwm))
 				stmpe_24xx_pwm_enable(chip, pwm);

 			return 0;
 		} else if (stmpe_pwm->stmpe->partnum == STMPE2403) {
 			/* STMPE2403 can simply set the right PWM value */
 			program[0] = LOAD | value;
 			program[1] = 0x0000;
 		} else if (stmpe_pwm->stmpe->partnum == STMPE2401) {
 			/* STMPE2401 need a complex program */
 			u16 incdec = 0x0000;

 			if (last < value)
 				/* Count up */
 				incdec = RAMPUP | (value - last);
 			else
 				/* Count down */
 				incdec = RAMPDOWN | (last - value);

 			/* Step to desired value, smoothly */
 			program[0] = PRESCALE_512 | STEPTIME_1 | incdec;

 			/* Loop eternally to 0x00 */
 			program[1] = BRANCH;
 		}

 		dev_dbg(chip->dev,
 			"PWM#%u: value = %02x, last_duty = %02x, program=%04x,%04x,%04x\n",
 			pwm->hwpwm, value, last, program[0], program[1],
 			program[2]);
 		stmpe_pwm->last_duty = value;
 	}

 	/*
 	 * We can write programs of up to 64 16-bit words into this channel.
 	 */
 	for (i = 0; i < ARRAY_SIZE(program); i++) {
 		u8 value;

 		value = (program[i] >> 8) & 0xff;

 		ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
 		if (ret) {
 			dev_err(chip->dev, "error writing register %02x: %d\n",
 				offset, ret);
 			return ret;
 		}

 		value = program[i] & 0xff;

 		ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
 		if (ret) {
 			dev_err(chip->dev, "error writing register %02x: %d\n",
 				offset, ret);
 			return ret;
 		}
 	}

 	/* If we were enabled, re-enable this PWM */
 	if (pwm_is_enabled(pwm))
 		stmpe_24xx_pwm_enable(chip, pwm);

 	/* Sleep for 200ms so we're sure it will take effect */
 	msleep(200);

 	dev_dbg(chip->dev, "programmed PWM#%u, %u bytes\n", pwm->hwpwm, i);

 	return 0;
 }

 static int stmpe_24xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 				const struct pwm_state *state)
 {
 	int err;

 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;

 	if (!state->enabled) {
 		if (pwm->state.enabled)
 			stmpe_24xx_pwm_disable(chip, pwm);

 		return 0;
 	}

 	err = stmpe_24xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
 	if (err)
 		return err;

 	if (!pwm->state.enabled)
 		err = stmpe_24xx_pwm_enable(chip, pwm);

 	return err;
 }

 static const struct pwm_ops stmpe_24xx_pwm_ops = {
 	.apply = stmpe_24xx_pwm_apply,
 	.owner = THIS_MODULE,
 };

 static int __init stmpe_pwm_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 	struct stmpe_pwm *stmpe_pwm;
 	int ret;

 	stmpe_pwm = devm_kzalloc(&pdev->dev, sizeof(*stmpe_pwm), GFP_KERNEL);
 	if (!stmpe_pwm)
 		return -ENOMEM;

 	stmpe_pwm->stmpe = stmpe;
 	stmpe_pwm->chip.dev = &pdev->dev;

 	if (stmpe->partnum == STMPE2401 || stmpe->partnum == STMPE2403) {
 		stmpe_pwm->chip.ops = &stmpe_24xx_pwm_ops;
 		stmpe_pwm->chip.npwm = 3;
 	} else {
 		if (stmpe->partnum == STMPE1601)
 			dev_err(&pdev->dev, "STMPE1601 not yet supported\n");
 		else
 			dev_err(&pdev->dev, "Unknown STMPE PWM\n");

 		return -ENODEV;
 	}

 	ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
 	if (ret)
 		return ret;

 	ret = pwmchip_add(&stmpe_pwm->chip);
 	if (ret) {
 		stmpe_disable(stmpe, STMPE_BLOCK_PWM);
 		return ret;
 	}

 	return 0;
 }

 static struct platform_driver stmpe_pwm_driver = {
 	.driver = {
 		.name = "stmpe-pwm",
 	},
 };
 builtin_platform_driver_probe(stmpe_pwm_driver, stmpe_pwm_probe);
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Copyright (C) 2016 Linaro Ltd.
	*
	* Author: Linus Walleij <linus.walleij@linaro.org>
	*/

	#include <linux/bitops.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/mfd/stmpe.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/pwm.h>
	#include <linux/slab.h>

	#define STMPE24XX_PWMCS 0x30
	#define PWMCS_EN_PWM0 BIT(0)
	#define PWMCS_EN_PWM1 BIT(1)
	#define PWMCS_EN_PWM2 BIT(2)
	#define STMPE24XX_PWMIC0 0x38
	#define STMPE24XX_PWMIC1 0x39
	#define STMPE24XX_PWMIC2 0x3a

	#define STMPE_PWM_24XX_PINBASE 21

	struct stmpe_pwm {
	struct stmpe *stmpe;
	struct pwm_chip chip;
	u8 last_duty;
	};

	static inline struct stmpe_pwm to_stmpe_pwm(struct pwm_chip chip)
	{
	return container_of(chip, struct stmpe_pwm, chip);
	}

	static int stmpe_24xx_pwm_enable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
	u8 value;
	int ret;

	ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
	if (ret < 0) {
	dev_err(chip->dev, "error reading PWM#%u control\n",
	pwm->hwpwm);
	return ret;
	}

	value = ret \| BIT(pwm->hwpwm);

	ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
	if (ret) {
	dev_err(chip->dev, "error writing PWM#%u control\n",
	pwm->hwpwm);
	return ret;
	}

	return 0;
	}

	static void stmpe_24xx_pwm_disable(struct pwm_chip *chip,
	struct pwm_device *pwm)
	{
	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
	u8 value;
	int ret;

	ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
	if (ret < 0) {
	dev_err(chip->dev, "error reading PWM#%u control\n",
	pwm->hwpwm);
	return;
	}

	value = ret & ~BIT(pwm->hwpwm);

	ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
	if (ret) {
	dev_err(chip->dev, "error writing PWM#%u control\n",
	pwm->hwpwm);
	return;
	}
	}

	/* STMPE 24xx PWM instructions */
	#define SMAX 0x007f
	#define SMIN 0x00ff
	#define GTS 0x0000
	#define LOAD BIT(14) /* Only available on 2403 */
	#define RAMPUP 0x0000
	#define RAMPDOWN BIT(7)
	#define PRESCALE_512 BIT(14)
	#define STEPTIME_1 BIT(8)
	#define BRANCH (BIT(15) \| BIT(13))

	static int stmpe_24xx_pwm_config(struct pwm_chip chip, struct pwm_device pwm,
	int duty_ns, int period_ns)
	{
	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
	unsigned int i, pin;
	u16 program[3] = {
	SMAX,
	GTS,
	GTS,
	};
	u8 offset;
	int ret;

	/* Make sure we are disabled */
	if (pwm_is_enabled(pwm)) {
	stmpe_24xx_pwm_disable(chip, pwm);
	} else {
	/* Connect the PWM to the pin */
	pin = pwm->hwpwm;

	/* On STMPE2401 and 2403 pins 21,22,23 are used */
	if (stmpe_pwm->stmpe->partnum == STMPE2401 \|\|
	stmpe_pwm->stmpe->partnum == STMPE2403)
	pin += STMPE_PWM_24XX_PINBASE;

	ret = stmpe_set_altfunc(stmpe_pwm->stmpe, BIT(pin),
	STMPE_BLOCK_PWM);
	if (ret) {
	dev_err(chip->dev, "unable to connect PWM#%u to pin\n",
	pwm->hwpwm);
	return ret;
	}
	}

	/* STMPE24XX */
	switch (pwm->hwpwm) {
	case 0:
	offset = STMPE24XX_PWMIC0;
	break;

	case 1:
	offset = STMPE24XX_PWMIC1;
	break;

	case 2:
	offset = STMPE24XX_PWMIC2;
	break;

	default:
	/* Should not happen as npwm is 3 */
	return -ENODEV;
	}

	dev_dbg(chip->dev, "PWM#%u: config duty %d ns, period %d ns\n",
	pwm->hwpwm, duty_ns, period_ns);

	if (duty_ns == 0) {
	if (stmpe_pwm->stmpe->partnum == STMPE2401)
	program[0] = SMAX; /* off all the time */

	if (stmpe_pwm->stmpe->partnum == STMPE2403)
	program[0] = LOAD \| 0xff; /* LOAD 0xff */

	stmpe_pwm->last_duty = 0x00;
	} else if (duty_ns == period_ns) {
	if (stmpe_pwm->stmpe->partnum == STMPE2401)
	program[0] = SMIN; /* on all the time */

	if (stmpe_pwm->stmpe->partnum == STMPE2403)
	program[0] = LOAD \| 0x00; /* LOAD 0x00 */

	stmpe_pwm->last_duty = 0xff;
	} else {
	u8 value, last = stmpe_pwm->last_duty;
	unsigned long duty;

	/*
	* Counter goes from 0x00 to 0xff repeatedly at 32768 Hz,
	* (means a period of 30517 ns) then this is compared to the
	* counter from the ramp, if this is >= PWM counter the output
	* is high. With LOAD we can define how much of the cycle it
	* is on.
	*
	* Prescale = 0 -> 2 kHz -> T = 1/f = 488281.25 ns
	*/

	/* Scale to 0..0xff */
	duty = duty_ns * 256;
	duty = DIV_ROUND_CLOSEST(duty, period_ns);
	value = duty;

	if (value == last) {
	/* Run the old program */
	if (pwm_is_enabled(pwm))
	stmpe_24xx_pwm_enable(chip, pwm);

	return 0;
	} else if (stmpe_pwm->stmpe->partnum == STMPE2403) {
	/* STMPE2403 can simply set the right PWM value */
	program[0] = LOAD \| value;
	program[1] = 0x0000;
	} else if (stmpe_pwm->stmpe->partnum == STMPE2401) {
	/* STMPE2401 need a complex program */
	u16 incdec = 0x0000;

	if (last < value)
	/* Count up */
	incdec = RAMPUP \| (value - last);
	else
	/* Count down */
	incdec = RAMPDOWN \| (last - value);

	/* Step to desired value, smoothly */
	program[0] = PRESCALE_512 \| STEPTIME_1 \| incdec;

	/* Loop eternally to 0x00 */
	program[1] = BRANCH;
	}

	dev_dbg(chip->dev,
	"PWM#%u: value = %02x, last_duty = %02x, program=%04x,%04x,%04x\n",
	pwm->hwpwm, value, last, program[0], program[1],
	program[2]);
	stmpe_pwm->last_duty = value;
	}

	/*
	* We can write programs of up to 64 16-bit words into this channel.
	*/
	for (i = 0; i < ARRAY_SIZE(program); i++) {
	u8 value;

	value = (program[i] >> 8) & 0xff;

	ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
	if (ret) {
	dev_err(chip->dev, "error writing register %02x: %d\n",
	offset, ret);
	return ret;
	}

	value = program[i] & 0xff;

	ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
	if (ret) {
	dev_err(chip->dev, "error writing register %02x: %d\n",
	offset, ret);
	return ret;
	}
	}

	/* If we were enabled, re-enable this PWM */
	if (pwm_is_enabled(pwm))
	stmpe_24xx_pwm_enable(chip, pwm);

	/* Sleep for 200ms so we're sure it will take effect */
	msleep(200);

	dev_dbg(chip->dev, "programmed PWM#%u, %u bytes\n", pwm->hwpwm, i);

	return 0;
	}

	static int stmpe_24xx_pwm_apply(struct pwm_chip chip, struct pwm_device pwm,
	const struct pwm_state *state)
	{
	int err;

	if (state->polarity != PWM_POLARITY_NORMAL)
	return -EINVAL;

	if (!state->enabled) {
	if (pwm->state.enabled)
	stmpe_24xx_pwm_disable(chip, pwm);

	return 0;
	}

	err = stmpe_24xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
	if (err)
	return err;

	if (!pwm->state.enabled)
	err = stmpe_24xx_pwm_enable(chip, pwm);

	return err;
	}

	static const struct pwm_ops stmpe_24xx_pwm_ops = {
	.apply = stmpe_24xx_pwm_apply,
	.owner = THIS_MODULE,
	};

	static int __init stmpe_pwm_probe(struct platform_device *pdev)
	{
	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
	struct stmpe_pwm *stmpe_pwm;
	int ret;

	stmpe_pwm = devm_kzalloc(&pdev->dev, sizeof(*stmpe_pwm), GFP_KERNEL);
	if (!stmpe_pwm)
	return -ENOMEM;

	stmpe_pwm->stmpe = stmpe;
	stmpe_pwm->chip.dev = &pdev->dev;

	if (stmpe->partnum == STMPE2401 \|\| stmpe->partnum == STMPE2403) {
	stmpe_pwm->chip.ops = &stmpe_24xx_pwm_ops;
	stmpe_pwm->chip.npwm = 3;
	} else {
	if (stmpe->partnum == STMPE1601)
	dev_err(&pdev->dev, "STMPE1601 not yet supported\n");
	else
	dev_err(&pdev->dev, "Unknown STMPE PWM\n");

	return -ENODEV;
	}

	ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
	if (ret)
	return ret;

	ret = pwmchip_add(&stmpe_pwm->chip);
	if (ret) {
	stmpe_disable(stmpe, STMPE_BLOCK_PWM);
	return ret;
	}

	return 0;
	}

	static struct platform_driver stmpe_pwm_driver = {
	.driver = {
	.name = "stmpe-pwm",
	},
	};
	builtin_platform_driver_probe(stmpe_pwm_driver, stmpe_pwm_probe);