drivers/pwm/pwm-imx27.c - third_party/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * simple driver for PWM (Pulse Width Modulator) controller
  *
  * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
  *
  * Limitations:
  * - When disabled the output is driven to 0 independent of the configured
  *   polarity.
  */

 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>

 #define MX3_PWMCR			0x00    /* PWM Control Register */
 #define MX3_PWMSR			0x04    /* PWM Status Register */
 #define MX3_PWMSAR			0x0C    /* PWM Sample Register */
 #define MX3_PWMPR			0x10    /* PWM Period Register */

 #define MX3_PWMCR_FWM			GENMASK(27, 26)
 #define MX3_PWMCR_STOPEN		BIT(25)
 #define MX3_PWMCR_DOZEN			BIT(24)
 #define MX3_PWMCR_WAITEN		BIT(23)
 #define MX3_PWMCR_DBGEN			BIT(22)
 #define MX3_PWMCR_BCTR			BIT(21)
 #define MX3_PWMCR_HCTR			BIT(20)

 #define MX3_PWMCR_POUTC			GENMASK(19, 18)
 #define MX3_PWMCR_POUTC_NORMAL		0
 #define MX3_PWMCR_POUTC_INVERTED	1
 #define MX3_PWMCR_POUTC_OFF		2

 #define MX3_PWMCR_CLKSRC		GENMASK(17, 16)
 #define MX3_PWMCR_CLKSRC_OFF		0
 #define MX3_PWMCR_CLKSRC_IPG		1
 #define MX3_PWMCR_CLKSRC_IPG_HIGH	2
 #define MX3_PWMCR_CLKSRC_IPG_32K	3

 #define MX3_PWMCR_PRESCALER		GENMASK(15, 4)

 #define MX3_PWMCR_SWR			BIT(3)

 #define MX3_PWMCR_REPEAT		GENMASK(2, 1)
 #define MX3_PWMCR_REPEAT_1X		0
 #define MX3_PWMCR_REPEAT_2X		1
 #define MX3_PWMCR_REPEAT_4X		2
 #define MX3_PWMCR_REPEAT_8X		3

 #define MX3_PWMCR_EN			BIT(0)

 #define MX3_PWMSR_FWE			BIT(6)
 #define MX3_PWMSR_CMP			BIT(5)
 #define MX3_PWMSR_ROV			BIT(4)
 #define MX3_PWMSR_FE			BIT(3)

 #define MX3_PWMSR_FIFOAV		GENMASK(2, 0)
 #define MX3_PWMSR_FIFOAV_EMPTY		0
 #define MX3_PWMSR_FIFOAV_1WORD		1
 #define MX3_PWMSR_FIFOAV_2WORDS		2
 #define MX3_PWMSR_FIFOAV_3WORDS		3
 #define MX3_PWMSR_FIFOAV_4WORDS		4

 #define MX3_PWMCR_PRESCALER_SET(x)	FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
 #define MX3_PWMCR_PRESCALER_GET(x)	(FIELD_GET(MX3_PWMCR_PRESCALER, \
 						   (x)) + 1)

 #define MX3_PWM_SWR_LOOP		5

 /* PWMPR register value of 0xffff has the same effect as 0xfffe */
 #define MX3_PWMPR_MAX			0xfffe

 struct pwm_imx27_chip {
 	struct clk	*clk_ipg;
 	struct clk	*clk_per;
 	void __iomem	*mmio_base;
 	struct pwm_chip	chip;

 	/*
 	 * The driver cannot read the current duty cycle from the hardware if
 	 * the hardware is disabled. Cache the last programmed duty cycle
 	 * value to return in that case.
 	 */
 	unsigned int duty_cycle;
 };

 #define to_pwm_imx27_chip(chip)	container_of(chip, struct pwm_imx27_chip, chip)

 static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
 {
 	int ret;

 	ret = clk_prepare_enable(imx->clk_ipg);
 	if (ret)
 		return ret;

 	ret = clk_prepare_enable(imx->clk_per);
 	if (ret) {
 		clk_disable_unprepare(imx->clk_ipg);
 		return ret;
 	}

 	return 0;
 }

 static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
 {
 	clk_disable_unprepare(imx->clk_per);
 	clk_disable_unprepare(imx->clk_ipg);
 }

 static void pwm_imx27_get_state(struct pwm_chip *chip,
 				struct pwm_device *pwm, struct pwm_state *state)
 {
 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 	u32 period, prescaler, pwm_clk, val;
 	u64 tmp;
 	int ret;

 	ret = pwm_imx27_clk_prepare_enable(imx);
 	if (ret < 0)
 		return;

 	val = readl(imx->mmio_base + MX3_PWMCR);

 	if (val & MX3_PWMCR_EN)
 		state->enabled = true;
 	else
 		state->enabled = false;

 	switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
 	case MX3_PWMCR_POUTC_NORMAL:
 		state->polarity = PWM_POLARITY_NORMAL;
 		break;
 	case MX3_PWMCR_POUTC_INVERTED:
 		state->polarity = PWM_POLARITY_INVERSED;
 		break;
 	default:
 		dev_warn(chip->dev, "can't set polarity, output disconnected");
 	}

 	prescaler = MX3_PWMCR_PRESCALER_GET(val);
 	pwm_clk = clk_get_rate(imx->clk_per);
 	val = readl(imx->mmio_base + MX3_PWMPR);
 	period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;

 	/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
 	tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
 	state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);

 	/*
 	 * PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
 	 * use the cached value.
 	 */
 	if (state->enabled)
 		val = readl(imx->mmio_base + MX3_PWMSAR);
 	else
 		val = imx->duty_cycle;

 	tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
 	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);

 	pwm_imx27_clk_disable_unprepare(imx);
 }

 static void pwm_imx27_sw_reset(struct pwm_chip *chip)
 {
 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 	struct device *dev = chip->dev;
 	int wait_count = 0;
 	u32 cr;

 	writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
 	do {
 		usleep_range(200, 1000);
 		cr = readl(imx->mmio_base + MX3_PWMCR);
 	} while ((cr & MX3_PWMCR_SWR) &&
 		 (wait_count++ < MX3_PWM_SWR_LOOP));

 	if (cr & MX3_PWMCR_SWR)
 		dev_warn(dev, "software reset timeout\n");
 }

 static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
 				     struct pwm_device *pwm)
 {
 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 	struct device *dev = chip->dev;
 	unsigned int period_ms;
 	int fifoav;
 	u32 sr;

 	sr = readl(imx->mmio_base + MX3_PWMSR);
 	fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
 	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
 		period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
 					 NSEC_PER_MSEC);
 		msleep(period_ms);

 		sr = readl(imx->mmio_base + MX3_PWMSR);
 		if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
 			dev_warn(dev, "there is no free FIFO slot\n");
 	}
 }

 static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			   const struct pwm_state *state)
 {
 	unsigned long period_cycles, duty_cycles, prescale;
 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 	struct pwm_state cstate;
 	unsigned long long c;
 	unsigned long long clkrate;
 	int ret;
 	u32 cr;

 	pwm_get_state(pwm, &cstate);

 	clkrate = clk_get_rate(imx->clk_per);
 	c = clkrate * state->period;

 	do_div(c, NSEC_PER_SEC);
 	period_cycles = c;

 	prescale = period_cycles / 0x10000 + 1;

 	period_cycles /= prescale;
 	c = clkrate * state->duty_cycle;
 	do_div(c, NSEC_PER_SEC);
 	duty_cycles = c;
 	duty_cycles /= prescale;

 	/*
 	 * according to imx pwm RM, the real period value should be PERIOD
 	 * value in PWMPR plus 2.
 	 */
 	if (period_cycles > 2)
 		period_cycles -= 2;
 	else
 		period_cycles = 0;

 	/*
 	 * Wait for a free FIFO slot if the PWM is already enabled, and flush
 	 * the FIFO if the PWM was disabled and is about to be enabled.
 	 */
 	if (cstate.enabled) {
 		pwm_imx27_wait_fifo_slot(chip, pwm);
 	} else {
 		ret = pwm_imx27_clk_prepare_enable(imx);
 		if (ret)
 			return ret;

 		pwm_imx27_sw_reset(chip);
 	}

 	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
 	writel(period_cycles, imx->mmio_base + MX3_PWMPR);

 	/*
 	 * Store the duty cycle for future reference in cases where the
 	 * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled).
 	 */
 	imx->duty_cycle = duty_cycles;

 	cr = MX3_PWMCR_PRESCALER_SET(prescale) |
 	     MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
 	     FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
 	     MX3_PWMCR_DBGEN;

 	if (state->polarity == PWM_POLARITY_INVERSED)
 		cr |= FIELD_PREP(MX3_PWMCR_POUTC,
 				MX3_PWMCR_POUTC_INVERTED);

 	if (state->enabled)
 		cr |= MX3_PWMCR_EN;

 	writel(cr, imx->mmio_base + MX3_PWMCR);

 	if (!state->enabled)
 		pwm_imx27_clk_disable_unprepare(imx);

 	return 0;
 }

 static const struct pwm_ops pwm_imx27_ops = {
 	.apply = pwm_imx27_apply,
 	.get_state = pwm_imx27_get_state,
 	.owner = THIS_MODULE,
 };

 static const struct of_device_id pwm_imx27_dt_ids[] = {
 	{ .compatible = "fsl,imx27-pwm", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);

 static int pwm_imx27_probe(struct platform_device *pdev)
 {
 	struct pwm_imx27_chip *imx;
 	int ret;
 	u32 pwmcr;

 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (imx == NULL)
 		return -ENOMEM;

 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(imx->clk_ipg))
 		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
 				     "getting ipg clock failed\n");

 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
 	if (IS_ERR(imx->clk_per))
 		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
 				     "failed to get peripheral clock\n");

 	imx->chip.ops = &pwm_imx27_ops;
 	imx->chip.dev = &pdev->dev;
 	imx->chip.npwm = 1;

 	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(imx->mmio_base))
 		return PTR_ERR(imx->mmio_base);

 	ret = pwm_imx27_clk_prepare_enable(imx);
 	if (ret)
 		return ret;

 	/* keep clks on if pwm is running */
 	pwmcr = readl(imx->mmio_base + MX3_PWMCR);
 	if (!(pwmcr & MX3_PWMCR_EN))
 		pwm_imx27_clk_disable_unprepare(imx);

 	return devm_pwmchip_add(&pdev->dev, &imx->chip);
 }

 static struct platform_driver imx_pwm_driver = {
 	.driver = {
 		.name = "pwm-imx27",
 		.of_match_table = pwm_imx27_dt_ids,
 	},
 	.probe = pwm_imx27_probe,
 };
 module_platform_driver(imx_pwm_driver);

 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
	// SPDX-License-Identifier: GPL-2.0
	/*
	* simple driver for PWM (Pulse Width Modulator) controller
	*
	* Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
	*
	* Limitations:
	* - When disabled the output is driven to 0 independent of the configured
	* polarity.
	*/

	#include <linux/bitfield.h>
	#include <linux/bitops.h>
	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/pwm.h>
	#include <linux/slab.h>

	#define MX3_PWMCR 0x00 /* PWM Control Register */
	#define MX3_PWMSR 0x04 /* PWM Status Register */
	#define MX3_PWMSAR 0x0C /* PWM Sample Register */
	#define MX3_PWMPR 0x10 /* PWM Period Register */

	#define MX3_PWMCR_FWM GENMASK(27, 26)
	#define MX3_PWMCR_STOPEN BIT(25)
	#define MX3_PWMCR_DOZEN BIT(24)
	#define MX3_PWMCR_WAITEN BIT(23)
	#define MX3_PWMCR_DBGEN BIT(22)
	#define MX3_PWMCR_BCTR BIT(21)
	#define MX3_PWMCR_HCTR BIT(20)

	#define MX3_PWMCR_POUTC GENMASK(19, 18)
	#define MX3_PWMCR_POUTC_NORMAL 0
	#define MX3_PWMCR_POUTC_INVERTED 1
	#define MX3_PWMCR_POUTC_OFF 2

	#define MX3_PWMCR_CLKSRC GENMASK(17, 16)
	#define MX3_PWMCR_CLKSRC_OFF 0
	#define MX3_PWMCR_CLKSRC_IPG 1
	#define MX3_PWMCR_CLKSRC_IPG_HIGH 2
	#define MX3_PWMCR_CLKSRC_IPG_32K 3

	#define MX3_PWMCR_PRESCALER GENMASK(15, 4)

	#define MX3_PWMCR_SWR BIT(3)

	#define MX3_PWMCR_REPEAT GENMASK(2, 1)
	#define MX3_PWMCR_REPEAT_1X 0
	#define MX3_PWMCR_REPEAT_2X 1
	#define MX3_PWMCR_REPEAT_4X 2
	#define MX3_PWMCR_REPEAT_8X 3

	#define MX3_PWMCR_EN BIT(0)

	#define MX3_PWMSR_FWE BIT(6)
	#define MX3_PWMSR_CMP BIT(5)
	#define MX3_PWMSR_ROV BIT(4)
	#define MX3_PWMSR_FE BIT(3)

	#define MX3_PWMSR_FIFOAV GENMASK(2, 0)
	#define MX3_PWMSR_FIFOAV_EMPTY 0
	#define MX3_PWMSR_FIFOAV_1WORD 1
	#define MX3_PWMSR_FIFOAV_2WORDS 2
	#define MX3_PWMSR_FIFOAV_3WORDS 3
	#define MX3_PWMSR_FIFOAV_4WORDS 4

	#define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
	#define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \
	(x)) + 1)

	#define MX3_PWM_SWR_LOOP 5

	/* PWMPR register value of 0xffff has the same effect as 0xfffe */
	#define MX3_PWMPR_MAX 0xfffe

	struct pwm_imx27_chip {
	struct clk *clk_ipg;
	struct clk *clk_per;
	void __iomem *mmio_base;
	struct pwm_chip chip;

	/*
	* The driver cannot read the current duty cycle from the hardware if
	* the hardware is disabled. Cache the last programmed duty cycle
	* value to return in that case.
	*/
	unsigned int duty_cycle;
	};

	#define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip)

	static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
	{
	int ret;

	ret = clk_prepare_enable(imx->clk_ipg);
	if (ret)
	return ret;

	ret = clk_prepare_enable(imx->clk_per);
	if (ret) {
	clk_disable_unprepare(imx->clk_ipg);
	return ret;
	}

	return 0;
	}

	static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
	{
	clk_disable_unprepare(imx->clk_per);
	clk_disable_unprepare(imx->clk_ipg);
	}

	static void pwm_imx27_get_state(struct pwm_chip *chip,
	struct pwm_device pwm, struct pwm_state state)
	{
	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
	u32 period, prescaler, pwm_clk, val;
	u64 tmp;
	int ret;

	ret = pwm_imx27_clk_prepare_enable(imx);
	if (ret < 0)
	return;

	val = readl(imx->mmio_base + MX3_PWMCR);

	if (val & MX3_PWMCR_EN)
	state->enabled = true;
	else
	state->enabled = false;

	switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
	case MX3_PWMCR_POUTC_NORMAL:
	state->polarity = PWM_POLARITY_NORMAL;
	break;
	case MX3_PWMCR_POUTC_INVERTED:
	state->polarity = PWM_POLARITY_INVERSED;
	break;
	default:
	dev_warn(chip->dev, "can't set polarity, output disconnected");
	}

	prescaler = MX3_PWMCR_PRESCALER_GET(val);
	pwm_clk = clk_get_rate(imx->clk_per);
	val = readl(imx->mmio_base + MX3_PWMPR);
	period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;

	/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
	tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
	state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);

	/*
	* PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
	* use the cached value.
	*/
	if (state->enabled)
	val = readl(imx->mmio_base + MX3_PWMSAR);
	else
	val = imx->duty_cycle;

	tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);

	pwm_imx27_clk_disable_unprepare(imx);
	}

	static void pwm_imx27_sw_reset(struct pwm_chip *chip)
	{
	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
	struct device *dev = chip->dev;
	int wait_count = 0;
	u32 cr;

	writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
	do {
	usleep_range(200, 1000);
	cr = readl(imx->mmio_base + MX3_PWMCR);
	} while ((cr & MX3_PWMCR_SWR) &&
	(wait_count++ < MX3_PWM_SWR_LOOP));

	if (cr & MX3_PWMCR_SWR)
	dev_warn(dev, "software reset timeout\n");
	}

	static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
	struct pwm_device *pwm)
	{
	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
	struct device *dev = chip->dev;
	unsigned int period_ms;
	int fifoav;
	u32 sr;

	sr = readl(imx->mmio_base + MX3_PWMSR);
	fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
	period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
	NSEC_PER_MSEC);
	msleep(period_ms);

	sr = readl(imx->mmio_base + MX3_PWMSR);
	if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
	dev_warn(dev, "there is no free FIFO slot\n");
	}
	}

	static int pwm_imx27_apply(struct pwm_chip chip, struct pwm_device pwm,
	const struct pwm_state *state)
	{
	unsigned long period_cycles, duty_cycles, prescale;
	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
	struct pwm_state cstate;
	unsigned long long c;
	unsigned long long clkrate;
	int ret;
	u32 cr;

	pwm_get_state(pwm, &cstate);

	clkrate = clk_get_rate(imx->clk_per);
	c = clkrate * state->period;

	do_div(c, NSEC_PER_SEC);
	period_cycles = c;

	prescale = period_cycles / 0x10000 + 1;

	period_cycles /= prescale;
	c = clkrate * state->duty_cycle;
	do_div(c, NSEC_PER_SEC);
	duty_cycles = c;
	duty_cycles /= prescale;

	/*
	* according to imx pwm RM, the real period value should be PERIOD
	* value in PWMPR plus 2.
	*/
	if (period_cycles > 2)
	period_cycles -= 2;
	else
	period_cycles = 0;

	/*
	* Wait for a free FIFO slot if the PWM is already enabled, and flush
	* the FIFO if the PWM was disabled and is about to be enabled.
	*/
	if (cstate.enabled) {
	pwm_imx27_wait_fifo_slot(chip, pwm);
	} else {
	ret = pwm_imx27_clk_prepare_enable(imx);
	if (ret)
	return ret;

	pwm_imx27_sw_reset(chip);
	}

	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
	writel(period_cycles, imx->mmio_base + MX3_PWMPR);

	/*
	* Store the duty cycle for future reference in cases where the
	* MX3_PWMSAR register can't be read (i.e. when the PWM is disabled).
	*/
	imx->duty_cycle = duty_cycles;

	cr = MX3_PWMCR_PRESCALER_SET(prescale) \|
	MX3_PWMCR_STOPEN \| MX3_PWMCR_DOZEN \| MX3_PWMCR_WAITEN \|
	FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) \|
	MX3_PWMCR_DBGEN;

	if (state->polarity == PWM_POLARITY_INVERSED)
	cr \|= FIELD_PREP(MX3_PWMCR_POUTC,
	MX3_PWMCR_POUTC_INVERTED);

	if (state->enabled)
	cr \|= MX3_PWMCR_EN;

	writel(cr, imx->mmio_base + MX3_PWMCR);

	if (!state->enabled)
	pwm_imx27_clk_disable_unprepare(imx);

	return 0;
	}

	static const struct pwm_ops pwm_imx27_ops = {
	.apply = pwm_imx27_apply,
	.get_state = pwm_imx27_get_state,
	.owner = THIS_MODULE,
	};

	static const struct of_device_id pwm_imx27_dt_ids[] = {
	{ .compatible = "fsl,imx27-pwm", },
	{ /* sentinel */ }
	};
	MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);

	static int pwm_imx27_probe(struct platform_device *pdev)
	{
	struct pwm_imx27_chip *imx;
	int ret;
	u32 pwmcr;

	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
	if (imx == NULL)
	return -ENOMEM;

	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
	if (IS_ERR(imx->clk_ipg))
	return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
	"getting ipg clock failed\n");

	imx->clk_per = devm_clk_get(&pdev->dev, "per");
	if (IS_ERR(imx->clk_per))
	return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
	"failed to get peripheral clock\n");

	imx->chip.ops = &pwm_imx27_ops;
	imx->chip.dev = &pdev->dev;
	imx->chip.npwm = 1;

	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(imx->mmio_base))
	return PTR_ERR(imx->mmio_base);

	ret = pwm_imx27_clk_prepare_enable(imx);
	if (ret)
	return ret;

	/* keep clks on if pwm is running */
	pwmcr = readl(imx->mmio_base + MX3_PWMCR);
	if (!(pwmcr & MX3_PWMCR_EN))
	pwm_imx27_clk_disable_unprepare(imx);

	return devm_pwmchip_add(&pdev->dev, &imx->chip);
	}

	static struct platform_driver imx_pwm_driver = {
	.driver = {
	.name = "pwm-imx27",
	.of_match_table = pwm_imx27_dt_ids,
	},
	.probe = pwm_imx27_probe,
	};
	module_platform_driver(imx_pwm_driver);

	MODULE_LICENSE("GPL v2");
	MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");