drivers/platform/x86/compal-laptop.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*-*-linux-c-*-*/

/*
  Copyright (C) 2008 Cezary Jackiewicz <cezary.jackiewicz (at) gmail.com>

  based on MSI driver

  Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>

 */

/*
 * compal-laptop.c - Compal laptop support.
 *
 * This driver exports a few files in /sys/devices/platform/compal-laptop/:
 *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
 *
 * In addition to these platform device attributes the driver
 * registers itself in the Linux backlight control, power_supply, rfkill
 * and hwmon subsystem and is available to userspace under:
 *
 *   /sys/class/backlight/compal-laptop/
 *   /sys/class/power_supply/compal-laptop/
 *   /sys/class/rfkill/rfkillX/
 *   /sys/class/hwmon/hwmonX/
 *
 * Notes on the power_supply battery interface:
 *   - the "minimum" design voltage is *the* design voltage
 *   - the ambient temperature is the average battery temperature
 *     and the value is an educated guess (see commented code below)
 *
 *
 * This driver might work on other laptops produced by Compal. If you
 * want to try it you can pass force=1 as argument to the module which
 * will force it to load even when the DMI data doesn't identify the
 * laptop as compatible.
 *
 * Lots of data available at:
 * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
 * JHL90%20service%20manual-Final-0725.pdf
 *
 *
 *
 * Support for the Compal JHL90 added by Roald Frederickx
 * (roald.frederickx@gmail.com):
 * Driver got large revision. Added functionalities: backlight
 * power, wake_on_XXX, a hwmon and power_supply interface.
 *
 * In case this gets merged into the kernel source: I want to dedicate this
 * to Kasper Meerts, the awesome guy who showed me Linux and C!
 */

/* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
 * only enabled on a JHL90 board until it is verified that they work on the
 * other boards too.  See the extra_features variable. */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/backlight.h>
#include <linux/platform_device.h>
#include <linux/rfkill.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/power_supply.h>
#include <linux/fb.h>
#include <acpi/video.h>

/* ======= */
/* Defines */
/* ======= */
#define DRIVER_NAME "compal-laptop"
#define DRIVER_VERSION	"0.2.7"

#define BACKLIGHT_LEVEL_ADDR		0xB9
#define BACKLIGHT_LEVEL_MAX		7
#define BACKLIGHT_STATE_ADDR		0x59
#define BACKLIGHT_STATE_ON_DATA		0xE1
#define BACKLIGHT_STATE_OFF_DATA	0xE2

#define WAKE_UP_ADDR			0xA4
#define WAKE_UP_PME			(1 << 0)
#define WAKE_UP_MODEM			(1 << 1)
#define WAKE_UP_LAN			(1 << 2)
#define WAKE_UP_WLAN			(1 << 4)
#define WAKE_UP_KEY			(1 << 6)
#define WAKE_UP_MOUSE			(1 << 7)

#define WIRELESS_ADDR			0xBB
#define WIRELESS_WLAN			(1 << 0)
#define WIRELESS_BT			(1 << 1)
#define WIRELESS_WLAN_EXISTS		(1 << 2)
#define WIRELESS_BT_EXISTS		(1 << 3)
#define WIRELESS_KILLSWITCH		(1 << 4)

#define PWM_ADDRESS			0x46
#define PWM_DISABLE_ADDR		0x59
#define PWM_DISABLE_DATA		0xA5
#define PWM_ENABLE_ADDR			0x59
#define PWM_ENABLE_DATA			0xA8

#define FAN_ADDRESS			0x46
#define FAN_DATA			0x81
#define FAN_FULL_ON_CMD			0x59 /* Doesn't seem to work. Just */
#define FAN_FULL_ON_ENABLE		0x76 /* force the pwm signal to its */
#define FAN_FULL_ON_DISABLE		0x77 /* maximum value instead */

#define TEMP_CPU			0xB0
#define TEMP_CPU_LOCAL			0xB1
#define TEMP_CPU_DTS			0xB5
#define TEMP_NORTHBRIDGE		0xB6
#define TEMP_VGA			0xB4
#define TEMP_SKIN			0xB2

#define BAT_MANUFACTURER_NAME_ADDR	0x10
#define BAT_MANUFACTURER_NAME_LEN	9
#define BAT_MODEL_NAME_ADDR		0x19
#define BAT_MODEL_NAME_LEN		6
#define BAT_SERIAL_NUMBER_ADDR		0xC4
#define BAT_SERIAL_NUMBER_LEN		5
#define BAT_CHARGE_NOW			0xC2
#define BAT_CHARGE_DESIGN		0xCA
#define BAT_VOLTAGE_NOW			0xC6
#define BAT_VOLTAGE_DESIGN		0xC8
#define BAT_CURRENT_NOW			0xD0
#define BAT_CURRENT_AVG			0xD2
#define BAT_POWER			0xD4
#define BAT_CAPACITY			0xCE
#define BAT_TEMP			0xD6
#define BAT_TEMP_AVG			0xD7
#define BAT_STATUS0			0xC1
#define BAT_STATUS1			0xF0
#define BAT_STATUS2			0xF1
#define BAT_STOP_CHARGE1		0xF2
#define BAT_STOP_CHARGE2		0xF3
#define BAT_CHARGE_LIMIT		0x03
#define BAT_CHARGE_LIMIT_MAX		100

#define BAT_S0_DISCHARGE		(1 << 0)
#define BAT_S0_DISCHRG_CRITICAL		(1 << 2)
#define BAT_S0_LOW			(1 << 3)
#define BAT_S0_CHARGING			(1 << 1)
#define BAT_S0_AC			(1 << 7)
#define BAT_S1_EXISTS			(1 << 0)
#define BAT_S1_FULL			(1 << 1)
#define BAT_S1_EMPTY			(1 << 2)
#define BAT_S1_LiION_OR_NiMH		(1 << 7)
#define BAT_S2_LOW_LOW			(1 << 0)
#define BAT_STOP_CHRG1_BAD_CELL		(1 << 1)
#define BAT_STOP_CHRG1_COMM_FAIL	(1 << 2)
#define BAT_STOP_CHRG1_OVERVOLTAGE	(1 << 6)
#define BAT_STOP_CHRG1_OVERTEMPERATURE	(1 << 7)


/* ======= */
/* Structs */
/* ======= */
struct compal_data{
	/* Fan control */
	int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by motherboard */
	unsigned char curr_pwm;

	/* Power supply */
	struct power_supply *psy;
	struct power_supply_info psy_info;
	char bat_model_name[BAT_MODEL_NAME_LEN + 1];
	char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
	char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
};


/* =============== */
/* General globals */
/* =============== */
static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");

/* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
 * only gets enabled on a JHL90 board. Might work with the others too */
static bool extra_features;

/* Nasty stuff. For some reason the fan control is very un-linear.  I've
 * come up with these values by looping through the possible inputs and
 * watching the output of address 0x4F (do an ec_transaction writing 0x33
 * into 0x4F and read a few bytes from the output, like so:
 *	u8 writeData = 0x33;
 *	ec_transaction(0x4F, &writeData, 1, buffer, 32);
 * That address is labeled "fan1 table information" in the service manual.
 * It should be clear which value in 'buffer' changes). This seems to be
 * related to fan speed. It isn't a proper 'realtime' fan speed value
 * though, because physically stopping or speeding up the fan doesn't
 * change it. It might be the average voltage or current of the pwm output.
 * Nevertheless, it is more fine-grained than the actual RPM reading */
static const unsigned char pwm_lookup_table[256] = {
	0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
	7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
	13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
	75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
	94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
	139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
	76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
	22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
	219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
	186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
	33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
	206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
	47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
	48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
	189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
	191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
	187, 187, 193, 50
};




/* ========================= */
/* Hardware access functions */
/* ========================= */
/* General access */
static u8 ec_read_u8(u8 addr)
{
	u8 value = 0;
	ec_read(addr, &value);
	return value;
}

static s8 ec_read_s8(u8 addr)
{
	return (s8)ec_read_u8(addr);
}

static u16 ec_read_u16(u8 addr)
{
	int hi, lo;
	lo = ec_read_u8(addr);
	hi = ec_read_u8(addr + 1);
	return (hi << 8) + lo;
}

static s16 ec_read_s16(u8 addr)
{
	return (s16) ec_read_u16(addr);
}

static void ec_read_sequence(u8 addr, u8 *buf, int len)
{
	int i;
	for (i = 0; i < len; i++)
		ec_read(addr + i, buf + i);
}


/* Backlight access */
static int set_backlight_level(int level)
{
	if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
		return -EINVAL;

	ec_write(BACKLIGHT_LEVEL_ADDR, level);

	return 0;
}

static int get_backlight_level(void)
{
	return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
}

static void set_backlight_state(bool on)
{
	u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
	ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0);
}


/* Fan control access */
static void pwm_enable_control(void)
{
	unsigned char writeData = PWM_ENABLE_DATA;
	ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0);
}

static void pwm_disable_control(void)
{
	unsigned char writeData = PWM_DISABLE_DATA;
	ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0);
}

static void set_pwm(int pwm)
{
	ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0);
}

static int get_fan_rpm(void)
{
	u8 value, data = FAN_DATA;
	ec_transaction(FAN_ADDRESS, &data, 1, &value, 1);
	return 100 * (int)value;
}




/* =================== */
/* Interface functions */
/* =================== */

/* Backlight interface */
static int bl_get_brightness(struct backlight_device *b)
{
	return get_backlight_level();
}

static int bl_update_status(struct backlight_device *b)
{
	int ret = set_backlight_level(b->props.brightness);
	if (ret)
		return ret;

	set_backlight_state(!backlight_is_blank(b));
	return 0;
}

static const struct backlight_ops compalbl_ops = {
	.get_brightness = bl_get_brightness,
	.update_status	= bl_update_status,
};


/* Wireless interface */
static int compal_rfkill_set(void *data, bool blocked)
{
	unsigned long radio = (unsigned long) data;
	u8 result = ec_read_u8(WIRELESS_ADDR);
	u8 value;

	if (!blocked)
		value = (u8) (result | radio);
	else
		value = (u8) (result & ~radio);
	ec_write(WIRELESS_ADDR, value);

	return 0;
}

static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
{
	u8 result = ec_read_u8(WIRELESS_ADDR);
	bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
	rfkill_set_hw_state(rfkill, hw_blocked);
}

static const struct rfkill_ops compal_rfkill_ops = {
	.poll = compal_rfkill_poll,
	.set_block = compal_rfkill_set,
};


/* Wake_up interface */
#define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)			\
static ssize_t NAME##_show(struct device *dev,				\
	struct device_attribute *attr, char *buf)			\
{									\
	return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));	\
}									\
static ssize_t NAME##_store(struct device *dev,				\
	struct device_attribute *attr, const char *buf, size_t count)	\
{									\
	int state;							\
	u8 old_val = ec_read_u8(ADDR);					\
	if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1))	\
		return -EINVAL;						\
	ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));	\
	return count;							\
}

SIMPLE_MASKED_STORE_SHOW(wake_up_pme,	WAKE_UP_ADDR, WAKE_UP_PME)
SIMPLE_MASKED_STORE_SHOW(wake_up_modem,	WAKE_UP_ADDR, WAKE_UP_MODEM)
SIMPLE_MASKED_STORE_SHOW(wake_up_lan,	WAKE_UP_ADDR, WAKE_UP_LAN)
SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,	WAKE_UP_ADDR, WAKE_UP_WLAN)
SIMPLE_MASKED_STORE_SHOW(wake_up_key,	WAKE_UP_ADDR, WAKE_UP_KEY)
SIMPLE_MASKED_STORE_SHOW(wake_up_mouse,	WAKE_UP_ADDR, WAKE_UP_MOUSE)

/* Fan control interface */
static ssize_t pwm_enable_show(struct device *dev,
		struct device_attribute *attr, char *buf)
{
	struct compal_data *data = dev_get_drvdata(dev);
	return sprintf(buf, "%d\n", data->pwm_enable);
}

static ssize_t pwm_enable_store(struct device *dev,
		struct device_attribute *attr, const char *buf, size_t count)
{
	struct compal_data *data = dev_get_drvdata(dev);
	long val;
	int err;

	err = kstrtol(buf, 10, &val);
	if (err)
		return err;
	if (val < 0)
		return -EINVAL;

	data->pwm_enable = val;

	switch (val) {
	case 0:  /* Full speed */
		pwm_enable_control();
		set_pwm(255);
		break;
	case 1:  /* As set by pwm1 */
		pwm_enable_control();
		set_pwm(data->curr_pwm);
		break;
	default: /* Control by motherboard */
		pwm_disable_control();
		break;
	}

	return count;
}

static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
		char *buf)
{
	struct compal_data *data = dev_get_drvdata(dev);
	return sprintf(buf, "%hhu\n", data->curr_pwm);
}

static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
		const char *buf, size_t count)
{
	struct compal_data *data = dev_get_drvdata(dev);
	long val;
	int err;

	err = kstrtol(buf, 10, &val);
	if (err)
		return err;
	if (val < 0 || val > 255)
		return -EINVAL;

	data->curr_pwm = val;

	if (data->pwm_enable != 1)
		return count;
	set_pwm(val);

	return count;
}

static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
		char *buf)
{
	return sprintf(buf, "%d\n", get_fan_rpm());
}


/* Temperature interface */
#define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)	\
static ssize_t temp_##POSTFIX(struct device *dev,			\
		struct device_attribute *attr, char *buf)		\
{									\
	return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));	\
}									\
static ssize_t label_##POSTFIX(struct device *dev,			\
		struct device_attribute *attr, char *buf)		\
{									\
	return sprintf(buf, "%s\n", LABEL);				\
}

/* Labels as in service guide */
TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");


/* Power supply interface */
static int bat_status(void)
{
	u8 status0 = ec_read_u8(BAT_STATUS0);
	u8 status1 = ec_read_u8(BAT_STATUS1);

	if (status0 & BAT_S0_CHARGING)
		return POWER_SUPPLY_STATUS_CHARGING;
	if (status0 & BAT_S0_DISCHARGE)
		return POWER_SUPPLY_STATUS_DISCHARGING;
	if (status1 & BAT_S1_FULL)
		return POWER_SUPPLY_STATUS_FULL;
	return POWER_SUPPLY_STATUS_NOT_CHARGING;
}

static int bat_health(void)
{
	u8 status = ec_read_u8(BAT_STOP_CHARGE1);

	if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
		return POWER_SUPPLY_HEALTH_OVERHEAT;
	if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
		return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
	if (status & BAT_STOP_CHRG1_BAD_CELL)
		return POWER_SUPPLY_HEALTH_DEAD;
	if (status & BAT_STOP_CHRG1_COMM_FAIL)
		return POWER_SUPPLY_HEALTH_UNKNOWN;
	return POWER_SUPPLY_HEALTH_GOOD;
}

static int bat_is_present(void)
{
	u8 status = ec_read_u8(BAT_STATUS2);
	return ((status & BAT_S1_EXISTS) != 0);
}

static int bat_technology(void)
{
	u8 status = ec_read_u8(BAT_STATUS1);

	if (status & BAT_S1_LiION_OR_NiMH)
		return POWER_SUPPLY_TECHNOLOGY_LION;
	return POWER_SUPPLY_TECHNOLOGY_NiMH;
}

static int bat_capacity_level(void)
{
	u8 status0 = ec_read_u8(BAT_STATUS0);
	u8 status1 = ec_read_u8(BAT_STATUS1);
	u8 status2 = ec_read_u8(BAT_STATUS2);

	if (status0 & BAT_S0_DISCHRG_CRITICAL
			|| status1 & BAT_S1_EMPTY
			|| status2 & BAT_S2_LOW_LOW)
		return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
	if (status0 & BAT_S0_LOW)
		return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
	if (status1 & BAT_S1_FULL)
		return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
	return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
}

static int bat_get_property(struct power_supply *psy,
				enum power_supply_property psp,
				union power_supply_propval *val)
{
	struct compal_data *data = power_supply_get_drvdata(psy);

	switch (psp) {
	case POWER_SUPPLY_PROP_STATUS:
		val->intval = bat_status();
		break;
	case POWER_SUPPLY_PROP_HEALTH:
		val->intval = bat_health();
		break;
	case POWER_SUPPLY_PROP_PRESENT:
		val->intval = bat_is_present();
		break;
	case POWER_SUPPLY_PROP_TECHNOLOGY:
		val->intval = bat_technology();
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
		val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
		val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
		break;
	case POWER_SUPPLY_PROP_CURRENT_NOW:
		val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
		break;
	case POWER_SUPPLY_PROP_CURRENT_AVG:
		val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
		break;
	case POWER_SUPPLY_PROP_POWER_NOW:
		val->intval = ec_read_u8(BAT_POWER) * 1000000;
		break;
	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
		val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
		break;
	case POWER_SUPPLY_PROP_CHARGE_NOW:
		val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
		break;
	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
		val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
		break;
	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
		val->intval = BAT_CHARGE_LIMIT_MAX;
		break;
	case POWER_SUPPLY_PROP_CAPACITY:
		val->intval = ec_read_u8(BAT_CAPACITY);
		break;
	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
		val->intval = bat_capacity_level();
		break;
	/* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
	 * the number of degrees, whereas BAT_TEMP is somewhat more
	 * complicated. It looks like this is a negative nember with a
	 * 100/256 divider and an offset of 222. Both were determined
	 * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
	case POWER_SUPPLY_PROP_TEMP:
		val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
		break;
	case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
		val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
		break;
	/* Neither the model name nor manufacturer name work for me. */
	case POWER_SUPPLY_PROP_MODEL_NAME:
		val->strval = data->bat_model_name;
		break;
	case POWER_SUPPLY_PROP_MANUFACTURER:
		val->strval = data->bat_manufacturer_name;
		break;
	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
		val->strval = data->bat_serial_number;
		break;
	default:
		break;
	}
	return 0;
}

static int bat_set_property(struct power_supply *psy,
				enum power_supply_property psp,
				const union power_supply_propval *val)
{
	int level;

	switch (psp) {
	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
		level = val->intval;
		if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
			return -EINVAL;
		if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
			return -EIO;
		break;
	default:
		break;
	}
	return 0;
}

static int bat_writeable_property(struct power_supply *psy,
				enum power_supply_property psp)
{
	switch (psp) {
	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
		return 1;
	default:
		return 0;
	}
}




/* ============== */
/* Driver Globals */
/* ============== */
static DEVICE_ATTR_RW(wake_up_pme);
static DEVICE_ATTR_RW(wake_up_modem);
static DEVICE_ATTR_RW(wake_up_lan);
static DEVICE_ATTR_RW(wake_up_wlan);
static DEVICE_ATTR_RW(wake_up_key);
static DEVICE_ATTR_RW(wake_up_mouse);

static DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL);
static DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL);
static DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL);
static DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL);
static DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL);
static DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL);
static DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL);
static DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL);
static DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL);
static DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL);
static DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL);
static DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL);
static DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL);
static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store);
static DEVICE_ATTR(pwm1_enable,
		   S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store);

static struct attribute *compal_platform_attrs[] = {
	&dev_attr_wake_up_pme.attr,
	&dev_attr_wake_up_modem.attr,
	&dev_attr_wake_up_lan.attr,
	&dev_attr_wake_up_wlan.attr,
	&dev_attr_wake_up_key.attr,
	&dev_attr_wake_up_mouse.attr,
	NULL
};
static const struct attribute_group compal_platform_attr_group = {
	.attrs = compal_platform_attrs
};

static struct attribute *compal_hwmon_attrs[] = {
	&dev_attr_pwm1_enable.attr,
	&dev_attr_pwm1.attr,
	&dev_attr_fan1_input.attr,
	&dev_attr_temp1_input.attr,
	&dev_attr_temp2_input.attr,
	&dev_attr_temp3_input.attr,
	&dev_attr_temp4_input.attr,
	&dev_attr_temp5_input.attr,
	&dev_attr_temp6_input.attr,
	&dev_attr_temp1_label.attr,
	&dev_attr_temp2_label.attr,
	&dev_attr_temp3_label.attr,
	&dev_attr_temp4_label.attr,
	&dev_attr_temp5_label.attr,
	&dev_attr_temp6_label.attr,
	NULL
};
ATTRIBUTE_GROUPS(compal_hwmon);

static int compal_probe(struct platform_device *);
static int compal_remove(struct platform_device *);
static struct platform_driver compal_driver = {
	.driver = {
		.name = DRIVER_NAME,
	},
	.probe	= compal_probe,
	.remove	= compal_remove,
};

static enum power_supply_property compal_bat_properties[] = {
	POWER_SUPPLY_PROP_STATUS,
	POWER_SUPPLY_PROP_HEALTH,
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_TECHNOLOGY,
	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_CURRENT_NOW,
	POWER_SUPPLY_PROP_CURRENT_AVG,
	POWER_SUPPLY_PROP_POWER_NOW,
	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
	POWER_SUPPLY_PROP_CHARGE_NOW,
	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
	POWER_SUPPLY_PROP_CAPACITY,
	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
	POWER_SUPPLY_PROP_TEMP,
	POWER_SUPPLY_PROP_TEMP_AMBIENT,
	POWER_SUPPLY_PROP_MODEL_NAME,
	POWER_SUPPLY_PROP_MANUFACTURER,
	POWER_SUPPLY_PROP_SERIAL_NUMBER,
};

static struct backlight_device *compalbl_device;

static struct platform_device *compal_device;

static struct rfkill *wifi_rfkill;
static struct rfkill *bt_rfkill;





/* =================================== */
/* Initialization & clean-up functions */
/* =================================== */

static int dmi_check_cb(const struct dmi_system_id *id)
{
	pr_info("Identified laptop model '%s'\n", id->ident);
	extra_features = false;
	return 1;
}

static int dmi_check_cb_extra(const struct dmi_system_id *id)
{
	pr_info("Identified laptop model '%s', enabling extra features\n",
		id->ident);
	extra_features = true;
	return 1;
}

static const struct dmi_system_id compal_dmi_table[] __initconst = {
	{
		.ident = "FL90/IFL90",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
			DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "FL90/IFL90",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
			DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "FL91/IFL91",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
			DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "FL92/JFL92",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "JFL92"),
			DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "FT00/IFT00",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "IFT00"),
			DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "Dell Mini 9",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "Dell Mini 10",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "Dell Mini 10v",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "Dell Mini 1012",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "Dell Inspiron 11z",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "Dell Mini 12",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"),
		},
		.callback = dmi_check_cb
	},
	{
		.ident = "JHL90",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
			DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
		},
		.callback = dmi_check_cb_extra
	},
	{
		.ident = "KHLB2",
		.matches = {
			DMI_MATCH(DMI_BOARD_NAME, "KHLB2"),
			DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
		},
		.callback = dmi_check_cb_extra
	},
	{ }
};
MODULE_DEVICE_TABLE(dmi, compal_dmi_table);

static const struct power_supply_desc psy_bat_desc = {
	.name		= DRIVER_NAME,
	.type		= POWER_SUPPLY_TYPE_BATTERY,
	.properties	= compal_bat_properties,
	.num_properties	= ARRAY_SIZE(compal_bat_properties),
	.get_property	= bat_get_property,
	.set_property	= bat_set_property,
	.property_is_writeable = bat_writeable_property,
};

static void initialize_power_supply_data(struct compal_data *data)
{
	ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
					data->bat_manufacturer_name,
					BAT_MANUFACTURER_NAME_LEN);
	data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;

	ec_read_sequence(BAT_MODEL_NAME_ADDR,
					data->bat_model_name,
					BAT_MODEL_NAME_LEN);
	data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;

	scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
				ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
}

static void initialize_fan_control_data(struct compal_data *data)
{
	data->pwm_enable = 2; /* Keep motherboard in control for now */
	data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
				 if we take over... */
}

static int setup_rfkill(void)
{
	int ret;

	wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
				RFKILL_TYPE_WLAN, &compal_rfkill_ops,
				(void *) WIRELESS_WLAN);
	if (!wifi_rfkill)
		return -ENOMEM;

	ret = rfkill_register(wifi_rfkill);
	if (ret)
		goto err_wifi;

	bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
				RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
				(void *) WIRELESS_BT);
	if (!bt_rfkill) {
		ret = -ENOMEM;
		goto err_allocate_bt;
	}
	ret = rfkill_register(bt_rfkill);
	if (ret)
		goto err_register_bt;

	return 0;

err_register_bt:
	rfkill_destroy(bt_rfkill);

err_allocate_bt:
	rfkill_unregister(wifi_rfkill);

err_wifi:
	rfkill_destroy(wifi_rfkill);

	return ret;
}

static int __init compal_init(void)
{
	int ret;

	if (acpi_disabled) {
		pr_err("ACPI needs to be enabled for this driver to work!\n");
		return -ENODEV;
	}

	if (!force && !dmi_check_system(compal_dmi_table)) {
		pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
		return -ENODEV;
	}

	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
		struct backlight_properties props;
		memset(&props, 0, sizeof(struct backlight_properties));
		props.type = BACKLIGHT_PLATFORM;
		props.max_brightness = BACKLIGHT_LEVEL_MAX;
		compalbl_device = backlight_device_register(DRIVER_NAME,
							    NULL, NULL,
							    &compalbl_ops,
							    &props);
		if (IS_ERR(compalbl_device))
			return PTR_ERR(compalbl_device);
	}

	ret = platform_driver_register(&compal_driver);
	if (ret)
		goto err_backlight;

	compal_device = platform_device_alloc(DRIVER_NAME, -1);
	if (!compal_device) {
		ret = -ENOMEM;
		goto err_platform_driver;
	}

	ret = platform_device_add(compal_device); /* This calls compal_probe */
	if (ret)
		goto err_platform_device;

	ret = setup_rfkill();
	if (ret)
		goto err_rfkill;

	pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
	return 0;

err_rfkill:
	platform_device_del(compal_device);

err_platform_device:
	platform_device_put(compal_device);

err_platform_driver:
	platform_driver_unregister(&compal_driver);

err_backlight:
	backlight_device_unregister(compalbl_device);

	return ret;
}

static int compal_probe(struct platform_device *pdev)
{
	int err;
	struct compal_data *data;
	struct device *hwmon_dev;
	struct power_supply_config psy_cfg = {};

	if (!extra_features)
		return 0;

	/* Fan control */
	data = devm_kzalloc(&pdev->dev, sizeof(struct compal_data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	initialize_fan_control_data(data);

	err = sysfs_create_group(&pdev->dev.kobj, &compal_platform_attr_group);
	if (err)
		return err;

	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
							   "compal", data,
							   compal_hwmon_groups);
	if (IS_ERR(hwmon_dev)) {
		err = PTR_ERR(hwmon_dev);
		goto remove;
	}

	/* Power supply */
	initialize_power_supply_data(data);
	psy_cfg.drv_data = data;
	data->psy = power_supply_register(&compal_device->dev, &psy_bat_desc,
					  &psy_cfg);
	if (IS_ERR(data->psy)) {
		err = PTR_ERR(data->psy);
		goto remove;
	}

	platform_set_drvdata(pdev, data);

	return 0;

remove:
	sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
	return err;
}

static void __exit compal_cleanup(void)
{
	platform_device_unregister(compal_device);
	platform_driver_unregister(&compal_driver);
	backlight_device_unregister(compalbl_device);
	rfkill_unregister(wifi_rfkill);
	rfkill_unregister(bt_rfkill);
	rfkill_destroy(wifi_rfkill);
	rfkill_destroy(bt_rfkill);

	pr_info("Driver unloaded\n");
}

static int compal_remove(struct platform_device *pdev)
{
	struct compal_data *data;

	if (!extra_features)
		return 0;

	pr_info("Unloading: resetting fan control to motherboard\n");
	pwm_disable_control();

	data = platform_get_drvdata(pdev);
	power_supply_unregister(data->psy);

	sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);

	return 0;
}


module_init(compal_init);
module_exit(compal_cleanup);

MODULE_AUTHOR("Cezary Jackiewicz");
MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
MODULE_DESCRIPTION("Compal Laptop Support");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");