| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * This file is part of wl12xx | |
| * | |
| * Copyright (C) 2012 Texas Instruments. All rights reserved. | |
| */ | |
| #include <linux/ieee80211.h> | |
| #include "scan.h" | |
| #include "../wlcore/debug.h" | |
| #include "../wlcore/tx.h" | |
| static int wl1271_get_scan_channels(struct wl1271 *wl, | |
| struct cfg80211_scan_request *req, | |
| struct basic_scan_channel_params *channels, | |
| enum nl80211_band band, bool passive) | |
| { | |
| struct conf_scan_settings *c = &wl->conf.scan; | |
| int i, j; | |
| u32 flags; | |
| for (i = 0, j = 0; | |
| i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; | |
| i++) { | |
| flags = req->channels[i]->flags; | |
| if (!test_bit(i, wl->scan.scanned_ch) && | |
| !(flags & IEEE80211_CHAN_DISABLED) && | |
| (req->channels[i]->band == band) && | |
| /* | |
| * In passive scans, we scan all remaining | |
| * channels, even if not marked as such. | |
| * In active scans, we only scan channels not | |
| * marked as passive. | |
| */ | |
| (passive || !(flags & IEEE80211_CHAN_NO_IR))) { | |
| wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", | |
| req->channels[i]->band, | |
| req->channels[i]->center_freq); | |
| wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", | |
| req->channels[i]->hw_value, | |
| req->channels[i]->flags); | |
| wl1271_debug(DEBUG_SCAN, | |
| "max_antenna_gain %d, max_power %d", | |
| req->channels[i]->max_antenna_gain, | |
| req->channels[i]->max_power); | |
| wl1271_debug(DEBUG_SCAN, "beacon_found %d", | |
| req->channels[i]->beacon_found); | |
| if (!passive) { | |
| channels[j].min_duration = | |
| cpu_to_le32(c->min_dwell_time_active); | |
| channels[j].max_duration = | |
| cpu_to_le32(c->max_dwell_time_active); | |
| } else { | |
| channels[j].min_duration = | |
| cpu_to_le32(c->dwell_time_passive); | |
| channels[j].max_duration = | |
| cpu_to_le32(c->dwell_time_passive); | |
| } | |
| channels[j].early_termination = 0; | |
| channels[j].tx_power_att = req->channels[i]->max_power; | |
| channels[j].channel = req->channels[i]->hw_value; | |
| memset(&channels[j].bssid_lsb, 0xff, 4); | |
| memset(&channels[j].bssid_msb, 0xff, 2); | |
| /* Mark the channels we already used */ | |
| set_bit(i, wl->scan.scanned_ch); | |
| j++; | |
| } | |
| } | |
| return j; | |
| } | |
| #define WL1271_NOTHING_TO_SCAN 1 | |
| static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, | |
| enum nl80211_band band, | |
| bool passive, u32 basic_rate) | |
| { | |
| struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); | |
| struct wl1271_cmd_scan *cmd; | |
| struct wl1271_cmd_trigger_scan_to *trigger; | |
| int ret; | |
| u16 scan_options = 0; | |
| /* skip active scans if we don't have SSIDs */ | |
| if (!passive && wl->scan.req->n_ssids == 0) | |
| return WL1271_NOTHING_TO_SCAN; | |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | |
| trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); | |
| if (!cmd || !trigger) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| if (wl->conf.scan.split_scan_timeout) | |
| scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; | |
| if (passive) | |
| scan_options |= WL1271_SCAN_OPT_PASSIVE; | |
| /* scan on the dev role if the regular one is not started */ | |
| if (wlcore_is_p2p_mgmt(wlvif)) | |
| cmd->params.role_id = wlvif->dev_role_id; | |
| else | |
| cmd->params.role_id = wlvif->role_id; | |
| if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| cmd->params.scan_options = cpu_to_le16(scan_options); | |
| cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, | |
| cmd->channels, | |
| band, passive); | |
| if (cmd->params.n_ch == 0) { | |
| ret = WL1271_NOTHING_TO_SCAN; | |
| goto out; | |
| } | |
| cmd->params.tx_rate = cpu_to_le32(basic_rate); | |
| cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; | |
| cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; | |
| cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; | |
| if (band == NL80211_BAND_2GHZ) | |
| cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; | |
| else | |
| cmd->params.band = WL1271_SCAN_BAND_5_GHZ; | |
| if (wl->scan.ssid_len) { | |
| cmd->params.ssid_len = wl->scan.ssid_len; | |
| memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); | |
| } | |
| memcpy(cmd->addr, vif->addr, ETH_ALEN); | |
| ret = wl12xx_cmd_build_probe_req(wl, wlvif, | |
| cmd->params.role_id, band, | |
| wl->scan.ssid, wl->scan.ssid_len, | |
| wl->scan.req->ie, | |
| wl->scan.req->ie_len, NULL, 0, false); | |
| if (ret < 0) { | |
| wl1271_error("PROBE request template failed"); | |
| goto out; | |
| } | |
| trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); | |
| ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, | |
| sizeof(*trigger), 0); | |
| if (ret < 0) { | |
| wl1271_error("trigger scan to failed for hw scan"); | |
| goto out; | |
| } | |
| wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); | |
| ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); | |
| if (ret < 0) { | |
| wl1271_error("SCAN failed"); | |
| goto out; | |
| } | |
| out: | |
| kfree(cmd); | |
| kfree(trigger); | |
| return ret; | |
| } | |
| int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) | |
| { | |
| struct wl1271_cmd_header *cmd = NULL; | |
| int ret = 0; | |
| if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) | |
| return -EINVAL; | |
| wl1271_debug(DEBUG_CMD, "cmd scan stop"); | |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | |
| if (!cmd) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, | |
| sizeof(*cmd), 0); | |
| if (ret < 0) { | |
| wl1271_error("cmd stop_scan failed"); | |
| goto out; | |
| } | |
| out: | |
| kfree(cmd); | |
| return ret; | |
| } | |
| void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif) | |
| { | |
| int ret = 0; | |
| enum nl80211_band band; | |
| u32 rate, mask; | |
| switch (wl->scan.state) { | |
| case WL1271_SCAN_STATE_IDLE: | |
| break; | |
| case WL1271_SCAN_STATE_2GHZ_ACTIVE: | |
| band = NL80211_BAND_2GHZ; | |
| mask = wlvif->bitrate_masks[band]; | |
| if (wl->scan.req->no_cck) { | |
| mask &= ~CONF_TX_CCK_RATES; | |
| if (!mask) | |
| mask = CONF_TX_RATE_MASK_BASIC_P2P; | |
| } | |
| rate = wl1271_tx_min_rate_get(wl, mask); | |
| ret = wl1271_scan_send(wl, wlvif, band, false, rate); | |
| if (ret == WL1271_NOTHING_TO_SCAN) { | |
| wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; | |
| wl1271_scan_stm(wl, wlvif); | |
| } | |
| break; | |
| case WL1271_SCAN_STATE_2GHZ_PASSIVE: | |
| band = NL80211_BAND_2GHZ; | |
| mask = wlvif->bitrate_masks[band]; | |
| if (wl->scan.req->no_cck) { | |
| mask &= ~CONF_TX_CCK_RATES; | |
| if (!mask) | |
| mask = CONF_TX_RATE_MASK_BASIC_P2P; | |
| } | |
| rate = wl1271_tx_min_rate_get(wl, mask); | |
| ret = wl1271_scan_send(wl, wlvif, band, true, rate); | |
| if (ret == WL1271_NOTHING_TO_SCAN) { | |
| if (wl->enable_11a) | |
| wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; | |
| else | |
| wl->scan.state = WL1271_SCAN_STATE_DONE; | |
| wl1271_scan_stm(wl, wlvif); | |
| } | |
| break; | |
| case WL1271_SCAN_STATE_5GHZ_ACTIVE: | |
| band = NL80211_BAND_5GHZ; | |
| rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); | |
| ret = wl1271_scan_send(wl, wlvif, band, false, rate); | |
| if (ret == WL1271_NOTHING_TO_SCAN) { | |
| wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; | |
| wl1271_scan_stm(wl, wlvif); | |
| } | |
| break; | |
| case WL1271_SCAN_STATE_5GHZ_PASSIVE: | |
| band = NL80211_BAND_5GHZ; | |
| rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); | |
| ret = wl1271_scan_send(wl, wlvif, band, true, rate); | |
| if (ret == WL1271_NOTHING_TO_SCAN) { | |
| wl->scan.state = WL1271_SCAN_STATE_DONE; | |
| wl1271_scan_stm(wl, wlvif); | |
| } | |
| break; | |
| case WL1271_SCAN_STATE_DONE: | |
| wl->scan.failed = false; | |
| cancel_delayed_work(&wl->scan_complete_work); | |
| ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, | |
| msecs_to_jiffies(0)); | |
| break; | |
| default: | |
| wl1271_error("invalid scan state"); | |
| break; | |
| } | |
| if (ret < 0) { | |
| cancel_delayed_work(&wl->scan_complete_work); | |
| ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, | |
| msecs_to_jiffies(0)); | |
| } | |
| } | |
| static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, | |
| struct wlcore_scan_channels *cmd_channels) | |
| { | |
| memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); | |
| memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); | |
| cmd->dfs = cmd_channels->dfs; | |
| cmd->n_pactive_ch = cmd_channels->passive_active; | |
| memcpy(cmd->channels_2, cmd_channels->channels_2, | |
| sizeof(cmd->channels_2)); | |
| memcpy(cmd->channels_5, cmd_channels->channels_5, | |
| sizeof(cmd->channels_5)); | |
| /* channels_4 are not supported, so no need to copy them */ | |
| } | |
| int wl1271_scan_sched_scan_config(struct wl1271 *wl, | |
| struct wl12xx_vif *wlvif, | |
| struct cfg80211_sched_scan_request *req, | |
| struct ieee80211_scan_ies *ies) | |
| { | |
| struct wl1271_cmd_sched_scan_config *cfg = NULL; | |
| struct wlcore_scan_channels *cfg_channels = NULL; | |
| struct conf_sched_scan_settings *c = &wl->conf.sched_scan; | |
| int i, ret; | |
| bool force_passive = !req->n_ssids; | |
| wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); | |
| cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); | |
| if (!cfg) | |
| return -ENOMEM; | |
| cfg->role_id = wlvif->role_id; | |
| cfg->rssi_threshold = c->rssi_threshold; | |
| cfg->snr_threshold = c->snr_threshold; | |
| cfg->n_probe_reqs = c->num_probe_reqs; | |
| /* cycles set to 0 it means infinite (until manually stopped) */ | |
| cfg->cycles = 0; | |
| /* report APs when at least 1 is found */ | |
| cfg->report_after = 1; | |
| /* don't stop scanning automatically when something is found */ | |
| cfg->terminate = 0; | |
| cfg->tag = WL1271_SCAN_DEFAULT_TAG; | |
| /* don't filter on BSS type */ | |
| cfg->bss_type = SCAN_BSS_TYPE_ANY; | |
| /* currently NL80211 supports only a single interval */ | |
| for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) | |
| cfg->intervals[i] = cpu_to_le32(req->scan_plans[0].interval * | |
| MSEC_PER_SEC); | |
| cfg->ssid_len = 0; | |
| ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); | |
| if (ret < 0) | |
| goto out; | |
| cfg->filter_type = ret; | |
| wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); | |
| cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL); | |
| if (!cfg_channels) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, | |
| req->n_channels, req->n_ssids, | |
| SCAN_TYPE_PERIODIC)) { | |
| wl1271_error("scan channel list is empty"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| wl12xx_adjust_channels(cfg, cfg_channels); | |
| if (!force_passive && cfg->active[0]) { | |
| u8 band = NL80211_BAND_2GHZ; | |
| ret = wl12xx_cmd_build_probe_req(wl, wlvif, | |
| wlvif->role_id, band, | |
| req->ssids[0].ssid, | |
| req->ssids[0].ssid_len, | |
| ies->ies[band], | |
| ies->len[band], | |
| ies->common_ies, | |
| ies->common_ie_len, | |
| true); | |
| if (ret < 0) { | |
| wl1271_error("2.4GHz PROBE request template failed"); | |
| goto out; | |
| } | |
| } | |
| if (!force_passive && cfg->active[1]) { | |
| u8 band = NL80211_BAND_5GHZ; | |
| ret = wl12xx_cmd_build_probe_req(wl, wlvif, | |
| wlvif->role_id, band, | |
| req->ssids[0].ssid, | |
| req->ssids[0].ssid_len, | |
| ies->ies[band], | |
| ies->len[band], | |
| ies->common_ies, | |
| ies->common_ie_len, | |
| true); | |
| if (ret < 0) { | |
| wl1271_error("5GHz PROBE request template failed"); | |
| goto out; | |
| } | |
| } | |
| wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); | |
| ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, | |
| sizeof(*cfg), 0); | |
| if (ret < 0) { | |
| wl1271_error("SCAN configuration failed"); | |
| goto out; | |
| } | |
| out: | |
| kfree(cfg_channels); | |
| kfree(cfg); | |
| return ret; | |
| } | |
| int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) | |
| { | |
| struct wl1271_cmd_sched_scan_start *start; | |
| int ret = 0; | |
| wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); | |
| if (wlvif->bss_type != BSS_TYPE_STA_BSS) | |
| return -EOPNOTSUPP; | |
| if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && | |
| test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) | |
| return -EBUSY; | |
| start = kzalloc(sizeof(*start), GFP_KERNEL); | |
| if (!start) | |
| return -ENOMEM; | |
| start->role_id = wlvif->role_id; | |
| start->tag = WL1271_SCAN_DEFAULT_TAG; | |
| ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, | |
| sizeof(*start), 0); | |
| if (ret < 0) { | |
| wl1271_error("failed to send scan start command"); | |
| goto out_free; | |
| } | |
| out_free: | |
| kfree(start); | |
| return ret; | |
| } | |
| int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, | |
| struct cfg80211_sched_scan_request *req, | |
| struct ieee80211_scan_ies *ies) | |
| { | |
| int ret; | |
| ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); | |
| if (ret < 0) | |
| return ret; | |
| return wl1271_scan_sched_scan_start(wl, wlvif); | |
| } | |
| void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) | |
| { | |
| struct wl1271_cmd_sched_scan_stop *stop; | |
| int ret = 0; | |
| wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); | |
| /* FIXME: what to do if alloc'ing to stop fails? */ | |
| stop = kzalloc(sizeof(*stop), GFP_KERNEL); | |
| if (!stop) { | |
| wl1271_error("failed to alloc memory to send sched scan stop"); | |
| return; | |
| } | |
| stop->role_id = wlvif->role_id; | |
| stop->tag = WL1271_SCAN_DEFAULT_TAG; | |
| ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, | |
| sizeof(*stop), 0); | |
| if (ret < 0) { | |
| wl1271_error("failed to send sched scan stop command"); | |
| goto out_free; | |
| } | |
| out_free: | |
| kfree(stop); | |
| } | |
| int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, | |
| struct cfg80211_scan_request *req) | |
| { | |
| wl1271_scan_stm(wl, wlvif); | |
| return 0; | |
| } | |
| void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) | |
| { | |
| wl1271_scan_stm(wl, wlvif); | |
| } |