| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Silicon Labs Si2146/2147/2148/2157/2158 silicon tuner driver |
| * |
| * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> |
| */ |
| |
| #include "si2157_priv.h" |
| |
| static const struct dvb_tuner_ops si2157_ops; |
| |
| static int tuner_lock_debug; |
| module_param(tuner_lock_debug, int, 0644); |
| MODULE_PARM_DESC(tuner_lock_debug, "if set, signal lock is briefly waited on after setting params"); |
| |
| /* execute firmware command */ |
| static int si2157_cmd_execute(struct i2c_client *client, struct si2157_cmd *cmd) |
| { |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| unsigned long timeout; |
| |
| mutex_lock(&dev->i2c_mutex); |
| |
| if (cmd->wlen) { |
| /* write cmd and args for firmware */ |
| ret = i2c_master_send(client, cmd->args, cmd->wlen); |
| if (ret < 0) { |
| goto err_mutex_unlock; |
| } else if (ret != cmd->wlen) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| } |
| |
| if (cmd->rlen) { |
| /* wait cmd execution terminate */ |
| #define TIMEOUT 80 |
| timeout = jiffies + msecs_to_jiffies(TIMEOUT); |
| while (!time_after(jiffies, timeout)) { |
| ret = i2c_master_recv(client, cmd->args, cmd->rlen); |
| if (ret < 0) { |
| goto err_mutex_unlock; |
| } else if (ret != cmd->rlen) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| |
| /* firmware ready? */ |
| if ((cmd->args[0] >> 7) & 0x01) |
| break; |
| } |
| |
| dev_dbg(&client->dev, "cmd execution took %d ms, status=%x\n", |
| jiffies_to_msecs(jiffies) - |
| (jiffies_to_msecs(timeout) - TIMEOUT), |
| cmd->args[0]); |
| |
| if (!((cmd->args[0] >> 7) & 0x01)) { |
| ret = -ETIMEDOUT; |
| goto err_mutex_unlock; |
| } |
| /* check error status bit */ |
| if (cmd->args[0] & 0x40) { |
| ret = -EAGAIN; |
| goto err_mutex_unlock; |
| } |
| } |
| |
| mutex_unlock(&dev->i2c_mutex); |
| return 0; |
| |
| err_mutex_unlock: |
| mutex_unlock(&dev->i2c_mutex); |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct si2157_tuner_info si2157_tuners[] = { |
| { SI2141, 0x60, false, SI2141_60_FIRMWARE, SI2141_A10_FIRMWARE }, |
| { SI2141, 0x61, false, SI2141_61_FIRMWARE, SI2141_A10_FIRMWARE }, |
| { SI2146, 0x11, false, SI2146_11_FIRMWARE, NULL }, |
| { SI2147, 0x50, false, SI2147_50_FIRMWARE, NULL }, |
| { SI2148, 0x32, true, SI2148_32_FIRMWARE, SI2158_A20_FIRMWARE }, |
| { SI2148, 0x33, true, SI2148_33_FIRMWARE, SI2158_A20_FIRMWARE }, |
| { SI2157, 0x50, false, SI2157_50_FIRMWARE, SI2157_A30_FIRMWARE }, |
| { SI2158, 0x50, false, SI2158_50_FIRMWARE, SI2158_A20_FIRMWARE }, |
| { SI2158, 0x51, false, SI2158_51_FIRMWARE, SI2158_A20_FIRMWARE }, |
| { SI2177, 0x50, false, SI2177_50_FIRMWARE, SI2157_A30_FIRMWARE }, |
| }; |
| |
| static int si2157_load_firmware(struct dvb_frontend *fe, |
| const char *fw_name) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| const struct firmware *fw; |
| int ret, len, remaining; |
| struct si2157_cmd cmd; |
| |
| /* request the firmware, this will block and timeout */ |
| ret = firmware_request_nowarn(&fw, fw_name, &client->dev); |
| if (ret) |
| return ret; |
| |
| /* firmware should be n chunks of 17 bytes */ |
| if (fw->size % 17 != 0) { |
| dev_err(&client->dev, "firmware file '%s' is invalid\n", |
| fw_name); |
| ret = -EINVAL; |
| goto err_release_firmware; |
| } |
| |
| dev_info(&client->dev, "downloading firmware from file '%s'\n", |
| fw_name); |
| |
| for (remaining = fw->size; remaining > 0; remaining -= 17) { |
| len = fw->data[fw->size - remaining]; |
| if (len > SI2157_ARGLEN) { |
| dev_err(&client->dev, "Bad firmware length\n"); |
| ret = -EINVAL; |
| goto err_release_firmware; |
| } |
| memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len); |
| cmd.wlen = len; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) { |
| dev_err(&client->dev, "firmware download failed %d\n", |
| ret); |
| goto err_release_firmware; |
| } |
| } |
| |
| err_release_firmware: |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| static int si2157_find_and_load_firmware(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| const char *fw_alt_name = NULL; |
| unsigned char part_id, rom_id; |
| const char *fw_name = NULL; |
| struct si2157_cmd cmd; |
| bool required = true; |
| int ret, i; |
| |
| if (dev->dont_load_firmware) { |
| dev_info(&client->dev, |
| "device is buggy, skipping firmware download\n"); |
| return 0; |
| } |
| |
| /* query chip revision */ |
| memcpy(cmd.args, "\x02", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 13; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| return ret; |
| |
| part_id = cmd.args[2]; |
| rom_id = cmd.args[12]; |
| |
| for (i = 0; i < ARRAY_SIZE(si2157_tuners); i++) { |
| if (si2157_tuners[i].part_id != part_id) |
| continue; |
| required = si2157_tuners[i].required; |
| fw_alt_name = si2157_tuners[i].fw_alt_name; |
| |
| /* Both part and rom ID match */ |
| if (si2157_tuners[i].rom_id == rom_id) { |
| fw_name = si2157_tuners[i].fw_name; |
| break; |
| } |
| } |
| |
| if (required && !fw_name && !fw_alt_name) { |
| dev_err(&client->dev, |
| "unknown chip version Si21%d-%c%c%c ROM 0x%02x\n", |
| part_id, cmd.args[1], cmd.args[3], cmd.args[4], rom_id); |
| return -EINVAL; |
| } |
| |
| /* Update the part id based on device's report */ |
| dev->part_id = part_id; |
| |
| dev_info(&client->dev, |
| "found a 'Silicon Labs Si21%d-%c%c%c ROM 0x%02x'\n", |
| part_id, cmd.args[1], cmd.args[3], cmd.args[4], rom_id); |
| |
| if (fw_name) |
| ret = si2157_load_firmware(fe, fw_name); |
| else |
| ret = -ENOENT; |
| |
| /* Try alternate name, if any */ |
| if (ret == -ENOENT && fw_alt_name) |
| ret = si2157_load_firmware(fe, fw_alt_name); |
| |
| if (ret == -ENOENT) { |
| if (!required) { |
| dev_info(&client->dev, "Using ROM firmware.\n"); |
| return 0; |
| } |
| dev_err(&client->dev, "Can't continue without a firmware.\n"); |
| } else if (ret < 0) { |
| dev_err(&client->dev, "error %d when loading firmware\n", ret); |
| } |
| return ret; |
| } |
| |
| static int si2157_init(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| unsigned int xtal_trim; |
| struct si2157_cmd cmd; |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* Try to get Xtal trim property, to verify tuner still running */ |
| memcpy(cmd.args, "\x15\x00\x02\x04", 4); |
| cmd.wlen = 4; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| |
| xtal_trim = cmd.args[2] | (cmd.args[3] << 8); |
| |
| if (ret == 0 && xtal_trim < 16) |
| goto warm; |
| |
| dev->if_frequency = 0; /* we no longer know current tuner state */ |
| |
| /* power up */ |
| if (dev->part_id == SI2146) { |
| /* clock_mode = XTAL, clock_freq = 24MHz */ |
| memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); |
| cmd.wlen = 9; |
| } else if (dev->part_id == SI2141) { |
| /* clock_mode: XTAL, xout enabled */ |
| memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10); |
| cmd.wlen = 10; |
| } else { |
| memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); |
| cmd.wlen = 15; |
| } |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret && (dev->part_id != SI2141 || ret != -EAGAIN)) |
| goto err; |
| |
| /* Si2141 needs a wake up command */ |
| if (dev->part_id == SI2141) { |
| memcpy(cmd.args, "\xc0\x08\x01\x02\x00\x00\x01", 7); |
| cmd.wlen = 7; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| } |
| |
| /* Try to load the firmware */ |
| ret = si2157_find_and_load_firmware(fe); |
| if (ret < 0) |
| goto err; |
| |
| /* reboot the tuner with new firmware? */ |
| memcpy(cmd.args, "\x01\x01", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* query firmware version */ |
| memcpy(cmd.args, "\x11", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 10; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev_info(&client->dev, "firmware version: %c.%c.%d\n", |
| cmd.args[6], cmd.args[7], cmd.args[8]); |
| |
| /* enable tuner status flags */ |
| memcpy(cmd.args, "\x14\x00\x01\x05\x01\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x01\x06\x01\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x01\x07\x01\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| warm: |
| /* init statistics in order signal app which are supported */ |
| c->strength.len = 1; |
| c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| /* start statistics polling */ |
| schedule_delayed_work(&dev->stat_work, msecs_to_jiffies(1000)); |
| |
| dev->active = true; |
| return 0; |
| |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2157_sleep(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| struct si2157_cmd cmd; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| dev->active = false; |
| |
| /* stop statistics polling */ |
| cancel_delayed_work_sync(&dev->stat_work); |
| |
| /* standby */ |
| memcpy(cmd.args, "\x16\x00", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2157_tune_wait(struct i2c_client *client, u8 is_digital) |
| { |
| #define TUN_TIMEOUT 40 |
| #define DIG_TIMEOUT 30 |
| #define ANALOG_TIMEOUT 150 |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| unsigned long timeout; |
| unsigned long start_time; |
| u8 wait_status; |
| u8 tune_lock_mask; |
| |
| if (is_digital) |
| tune_lock_mask = 0x04; |
| else |
| tune_lock_mask = 0x02; |
| |
| mutex_lock(&dev->i2c_mutex); |
| |
| /* wait tuner command complete */ |
| start_time = jiffies; |
| timeout = start_time + msecs_to_jiffies(TUN_TIMEOUT); |
| while (1) { |
| ret = i2c_master_recv(client, &wait_status, |
| sizeof(wait_status)); |
| if (ret < 0) { |
| goto err_mutex_unlock; |
| } else if (ret != sizeof(wait_status)) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| |
| if (time_after(jiffies, timeout)) |
| break; |
| |
| /* tuner done? */ |
| if ((wait_status & 0x81) == 0x81) |
| break; |
| usleep_range(5000, 10000); |
| } |
| |
| dev_dbg(&client->dev, "tuning took %d ms, status=0x%x\n", |
| jiffies_to_msecs(jiffies) - jiffies_to_msecs(start_time), |
| wait_status); |
| |
| /* if we tuned ok, wait a bit for tuner lock */ |
| if (tuner_lock_debug && (wait_status & 0x81) == 0x81) { |
| if (is_digital) |
| timeout = jiffies + msecs_to_jiffies(DIG_TIMEOUT); |
| else |
| timeout = jiffies + msecs_to_jiffies(ANALOG_TIMEOUT); |
| |
| while (!time_after(jiffies, timeout)) { |
| ret = i2c_master_recv(client, &wait_status, |
| sizeof(wait_status)); |
| if (ret < 0) { |
| goto err_mutex_unlock; |
| } else if (ret != sizeof(wait_status)) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| |
| /* tuner locked? */ |
| if (wait_status & tune_lock_mask) |
| break; |
| usleep_range(5000, 10000); |
| } |
| |
| dev_dbg(&client->dev, "tuning+lock took %d ms, status=0x%x\n", |
| jiffies_to_msecs(jiffies) - jiffies_to_msecs(start_time), |
| wait_status); |
| } |
| |
| if ((wait_status & 0xc0) != 0x80) { |
| ret = -ETIMEDOUT; |
| goto err_mutex_unlock; |
| } |
| |
| mutex_unlock(&dev->i2c_mutex); |
| return 0; |
| |
| err_mutex_unlock: |
| mutex_unlock(&dev->i2c_mutex); |
| dev_err(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2157_set_params(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| struct si2157_cmd cmd; |
| u8 bw, delivery_system; |
| u32 bandwidth; |
| u32 if_frequency = 5000000; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%d frequency=%u bandwidth_hz=%u\n", |
| c->delivery_system, c->frequency, c->bandwidth_hz); |
| |
| if (!dev->active) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| if (SUPPORTS_1700KHz(dev) && c->bandwidth_hz <= 1700000) { |
| bandwidth = 1700000; |
| bw = 9; |
| } else if (c->bandwidth_hz <= 6000000) { |
| bandwidth = 6000000; |
| bw = 6; |
| } else if (SUPPORTS_1700KHz(dev) && c->bandwidth_hz <= 6100000) { |
| bandwidth = 6100000; |
| bw = 10; |
| } else if (c->bandwidth_hz <= 7000000) { |
| bandwidth = 7000000; |
| bw = 7; |
| } else { |
| bandwidth = 8000000; |
| bw = 8; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| delivery_system = 0x00; |
| if_frequency = 3250000; |
| break; |
| case SYS_DVBC_ANNEX_B: |
| delivery_system = 0x10; |
| if_frequency = 4000000; |
| break; |
| case SYS_DVBT: |
| case SYS_DVBT2: /* it seems DVB-T and DVB-T2 both are 0x20 here */ |
| delivery_system = 0x20; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| case SYS_DVBC_ANNEX_C: |
| delivery_system = 0x30; |
| break; |
| case SYS_ISDBT: |
| delivery_system = 0x40; |
| break; |
| case SYS_DTMB: |
| delivery_system = 0x60; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| memcpy(cmd.args, "\x14\x00\x03\x07\x00\x00", 6); |
| cmd.args[4] = delivery_system | bw; |
| if (dev->inversion) |
| cmd.args[5] = 0x01; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* On SI2146, set DTV AGC source to DLIF_AGC_3DB */ |
| if (dev->part_id == SI2146) |
| memcpy(cmd.args, "\x14\x00\x02\x07\x00\x01", 6); |
| else |
| memcpy(cmd.args, "\x14\x00\x02\x07\x00\x00", 6); |
| cmd.args[4] = dev->if_port; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* set digital if frequency if needed */ |
| if (if_frequency != dev->if_frequency) { |
| memcpy(cmd.args, "\x14\x00\x06\x07", 4); |
| cmd.args[4] = (if_frequency / 1000) & 0xff; |
| cmd.args[5] = ((if_frequency / 1000) >> 8) & 0xff; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev->if_frequency = if_frequency; |
| } |
| |
| /* set digital frequency */ |
| memcpy(cmd.args, "\x41\x00\x00\x00\x00\x00\x00\x00", 8); |
| cmd.args[4] = (c->frequency >> 0) & 0xff; |
| cmd.args[5] = (c->frequency >> 8) & 0xff; |
| cmd.args[6] = (c->frequency >> 16) & 0xff; |
| cmd.args[7] = (c->frequency >> 24) & 0xff; |
| cmd.wlen = 8; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev->bandwidth = bandwidth; |
| dev->frequency = c->frequency; |
| |
| si2157_tune_wait(client, 1); /* wait to complete, ignore any errors */ |
| |
| return 0; |
| err: |
| dev->bandwidth = 0; |
| dev->frequency = 0; |
| dev->if_frequency = 0; |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2157_set_analog_params(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| char *std; /* for debugging */ |
| int ret; |
| struct si2157_cmd cmd; |
| u32 bandwidth = 0; |
| u32 if_frequency = 0; |
| u32 freq = 0; |
| u64 tmp_lval = 0; |
| u8 system = 0; |
| u8 color = 0; /* 0=NTSC/PAL, 0x10=SECAM */ |
| u8 invert_analog = 1; /* analog tuner spectrum; 0=normal, 1=inverted */ |
| |
| if (!SUPPORTS_ATV_IF(dev)) { |
| dev_info(&client->dev, "Analog tuning not supported yet for Si21%d\n", |
| dev->part_id); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (!dev->active) |
| si2157_init(fe); |
| |
| if (!dev->active) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| if (params->mode == V4L2_TUNER_RADIO) { |
| /* |
| * std = "fm"; |
| * bandwidth = 1700000; //best can do for FM, AGC will be a mess though |
| * if_frequency = 1250000; //HVR-225x(saa7164), HVR-12xx(cx23885) |
| * if_frequency = 6600000; //HVR-9xx(cx231xx) |
| * if_frequency = 5500000; //HVR-19xx(pvrusb2) |
| */ |
| dev_err(&client->dev, "si2157 does not currently support FM radio\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| tmp_lval = params->frequency * 625LL; |
| do_div(tmp_lval, 10); /* convert to HZ */ |
| freq = (u32)tmp_lval; |
| |
| if (freq < 1000000) /* is freq in KHz */ |
| freq = freq * 1000; |
| dev->frequency = freq; |
| |
| /* if_frequency values based on tda187271C2 */ |
| if (params->std & (V4L2_STD_B | V4L2_STD_GH)) { |
| if (freq >= 470000000) { |
| std = "palGH"; |
| bandwidth = 8000000; |
| if_frequency = 6000000; |
| system = 1; |
| if (params->std & |
| (V4L2_STD_SECAM_G | V4L2_STD_SECAM_H)) { |
| std = "secamGH"; |
| color = 0x10; |
| } |
| } else { |
| std = "palB"; |
| bandwidth = 7000000; |
| if_frequency = 6000000; |
| system = 0; |
| if (params->std & V4L2_STD_SECAM_B) { |
| std = "secamB"; |
| color = 0x10; |
| } |
| } |
| } else if (params->std & V4L2_STD_MN) { |
| std = "MN"; |
| bandwidth = 6000000; |
| if_frequency = 5400000; |
| system = 2; |
| } else if (params->std & V4L2_STD_PAL_I) { |
| std = "palI"; |
| bandwidth = 8000000; |
| if_frequency = 7250000; /* TODO: does not work yet */ |
| system = 4; |
| } else if (params->std & V4L2_STD_DK) { |
| std = "palDK"; |
| bandwidth = 8000000; |
| if_frequency = 6900000; /* TODO: does not work yet */ |
| system = 5; |
| if (params->std & V4L2_STD_SECAM_DK) { |
| std = "secamDK"; |
| color = 0x10; |
| } |
| } else if (params->std & V4L2_STD_SECAM_L) { |
| std = "secamL"; |
| bandwidth = 8000000; |
| if_frequency = 6750000; /* TODO: untested */ |
| system = 6; |
| color = 0x10; |
| } else if (params->std & V4L2_STD_SECAM_LC) { |
| std = "secamL'"; |
| bandwidth = 7000000; |
| if_frequency = 1250000; /* TODO: untested */ |
| system = 7; |
| color = 0x10; |
| } else { |
| std = "unknown"; |
| } |
| /* calc channel center freq */ |
| freq = freq - 1250000 + (bandwidth / 2); |
| |
| dev_dbg(&client->dev, |
| "mode=%d system=%u std='%s' params->frequency=%u center freq=%u if=%u bandwidth=%u\n", |
| params->mode, system, std, params->frequency, |
| freq, if_frequency, bandwidth); |
| |
| /* set analog IF port */ |
| memcpy(cmd.args, "\x14\x00\x03\x06\x08\x02", 6); |
| /* in using dev->if_port, we assume analog and digital IF's */ |
| /* are always on different ports */ |
| /* assumes if_port definition is 0 or 1 for digital out */ |
| cmd.args[4] = (dev->if_port == 1) ? 8 : 10; |
| /* Analog AGC assumed external */ |
| cmd.args[5] = (dev->if_port == 1) ? 2 : 1; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* set analog IF output config */ |
| memcpy(cmd.args, "\x14\x00\x0d\x06\x94\x64", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* make this distinct from a digital IF */ |
| dev->if_frequency = if_frequency | 1; |
| |
| /* calc and set tuner analog if center frequency */ |
| if_frequency = if_frequency + 1250000 - (bandwidth / 2); |
| dev_dbg(&client->dev, "IF Ctr freq=%d\n", if_frequency); |
| |
| memcpy(cmd.args, "\x14\x00\x0C\x06", 4); |
| cmd.args[4] = (if_frequency / 1000) & 0xff; |
| cmd.args[5] = ((if_frequency / 1000) >> 8) & 0xff; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* set analog AGC config */ |
| memcpy(cmd.args, "\x14\x00\x07\x06\x32\xc8", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* set analog video mode */ |
| memcpy(cmd.args, "\x14\x00\x04\x06\x00\x00", 6); |
| cmd.args[4] = system | color; |
| /* can use dev->inversion if assumed applies to both digital/analog */ |
| if (invert_analog) |
| cmd.args[5] |= 0x02; |
| cmd.wlen = 6; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* set analog frequency */ |
| memcpy(cmd.args, "\x41\x01\x00\x00\x00\x00\x00\x00", 8); |
| cmd.args[4] = (freq >> 0) & 0xff; |
| cmd.args[5] = (freq >> 8) & 0xff; |
| cmd.args[6] = (freq >> 16) & 0xff; |
| cmd.args[7] = (freq >> 24) & 0xff; |
| cmd.wlen = 8; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev->bandwidth = bandwidth; |
| |
| si2157_tune_wait(client, 0); /* wait to complete, ignore any errors */ |
| |
| return 0; |
| err: |
| dev->bandwidth = 0; |
| dev->frequency = 0; |
| dev->if_frequency = 0; |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2157_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| |
| *frequency = dev->frequency; |
| dev_dbg(&client->dev, "freq=%u\n", dev->frequency); |
| return 0; |
| } |
| |
| static int si2157_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| |
| *bandwidth = dev->bandwidth; |
| dev_dbg(&client->dev, "bandwidth=%u\n", dev->bandwidth); |
| return 0; |
| } |
| |
| static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| |
| *frequency = dev->if_frequency & ~1; /* strip analog IF indicator bit */ |
| dev_dbg(&client->dev, "if_frequency=%u\n", *frequency); |
| return 0; |
| } |
| |
| static int si2157_get_rf_strength(struct dvb_frontend *fe, u16 *rssi) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct si2157_cmd cmd; |
| int ret; |
| int strength; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| memcpy(cmd.args, "\x42\x00", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 12; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| c->strength.stat[0].scale = FE_SCALE_DECIBEL; |
| c->strength.stat[0].svalue = (s8)cmd.args[3] * 1000; |
| |
| /* normalize values based on Silicon Labs reference |
| * add 100, then anything > 80 is 100% signal |
| */ |
| strength = (s8)cmd.args[3] + 100; |
| strength = clamp_val(strength, 0, 80); |
| *rssi = (u16)(strength * 0xffff / 80); |
| |
| dev_dbg(&client->dev, "strength=%d rssi=%u\n", |
| (s8)cmd.args[3], *rssi); |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct dvb_tuner_ops si2157_ops = { |
| .info = { |
| .name = "Silicon Labs Si2141/Si2146/2147/2148/2157/2158", |
| .frequency_min_hz = 42 * MHz, |
| .frequency_max_hz = 870 * MHz, |
| }, |
| |
| .init = si2157_init, |
| .sleep = si2157_sleep, |
| .set_params = si2157_set_params, |
| .set_analog_params = si2157_set_analog_params, |
| .get_frequency = si2157_get_frequency, |
| .get_bandwidth = si2157_get_bandwidth, |
| .get_if_frequency = si2157_get_if_frequency, |
| |
| .get_rf_strength = si2157_get_rf_strength, |
| }; |
| |
| static void si2157_stat_work(struct work_struct *work) |
| { |
| struct si2157_dev *dev = container_of(work, struct si2157_dev, stat_work.work); |
| struct dvb_frontend *fe = dev->fe; |
| struct i2c_client *client = fe->tuner_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct si2157_cmd cmd; |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| memcpy(cmd.args, "\x42\x00", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 12; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| c->strength.stat[0].scale = FE_SCALE_DECIBEL; |
| c->strength.stat[0].svalue = (s8) cmd.args[3] * 1000; |
| |
| schedule_delayed_work(&dev->stat_work, msecs_to_jiffies(2000)); |
| return; |
| err: |
| c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| } |
| |
| static int si2157_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct si2157_config *cfg = client->dev.platform_data; |
| struct dvb_frontend *fe = cfg->fe; |
| struct si2157_dev *dev; |
| struct si2157_cmd cmd; |
| int ret; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| dev_err(&client->dev, "kzalloc() failed\n"); |
| goto err; |
| } |
| |
| i2c_set_clientdata(client, dev); |
| dev->fe = cfg->fe; |
| dev->inversion = cfg->inversion; |
| dev->dont_load_firmware = cfg->dont_load_firmware; |
| dev->if_port = cfg->if_port; |
| dev->part_id = (u8)id->driver_data; |
| dev->if_frequency = 5000000; /* default value of property 0x0706 */ |
| mutex_init(&dev->i2c_mutex); |
| INIT_DELAYED_WORK(&dev->stat_work, si2157_stat_work); |
| |
| /* check if the tuner is there */ |
| cmd.wlen = 0; |
| cmd.rlen = 1; |
| ret = si2157_cmd_execute(client, &cmd); |
| if (ret && ret != -EAGAIN) |
| goto err_kfree; |
| |
| memcpy(&fe->ops.tuner_ops, &si2157_ops, sizeof(struct dvb_tuner_ops)); |
| fe->tuner_priv = client; |
| |
| #ifdef CONFIG_MEDIA_CONTROLLER |
| if (cfg->mdev) { |
| dev->mdev = cfg->mdev; |
| |
| dev->ent.name = KBUILD_MODNAME; |
| dev->ent.function = MEDIA_ENT_F_TUNER; |
| |
| dev->pad[SI2157_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK; |
| dev->pad[SI2157_PAD_RF_INPUT].sig_type = PAD_SIGNAL_ANALOG; |
| dev->pad[SI2157_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; |
| dev->pad[SI2157_PAD_VID_OUT].sig_type = PAD_SIGNAL_ANALOG; |
| dev->pad[SI2157_PAD_AUD_OUT].flags = MEDIA_PAD_FL_SOURCE; |
| dev->pad[SI2157_PAD_AUD_OUT].sig_type = PAD_SIGNAL_AUDIO; |
| |
| ret = media_entity_pads_init(&dev->ent, SI2157_NUM_PADS, |
| &dev->pad[0]); |
| |
| if (ret) |
| goto err_kfree; |
| |
| ret = media_device_register_entity(cfg->mdev, &dev->ent); |
| if (ret) { |
| media_entity_cleanup(&dev->ent); |
| goto err_kfree; |
| } |
| } |
| #endif |
| |
| dev_info(&client->dev, "Silicon Labs Si21%d successfully attached\n", |
| dev->part_id); |
| |
| return 0; |
| |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2157_remove(struct i2c_client *client) |
| { |
| struct si2157_dev *dev = i2c_get_clientdata(client); |
| struct dvb_frontend *fe = dev->fe; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* stop statistics polling */ |
| cancel_delayed_work_sync(&dev->stat_work); |
| |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| if (dev->mdev) |
| media_device_unregister_entity(&dev->ent); |
| #endif |
| |
| memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops)); |
| fe->tuner_priv = NULL; |
| kfree(dev); |
| |
| return 0; |
| } |
| |
| /* |
| * The part_id used here will only be used on buggy devices that don't |
| * accept firmware uploads. Non-buggy devices should just use "si2157" for |
| * all SiLabs TER tuners, as the driver should auto-detect it. |
| */ |
| static const struct i2c_device_id si2157_id_table[] = { |
| {"si2157", SI2157}, |
| {"si2146", SI2146}, |
| {"si2141", SI2141}, |
| {"si2177", SI2177}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, si2157_id_table); |
| |
| static struct i2c_driver si2157_driver = { |
| .driver = { |
| .name = "si2157", |
| .suppress_bind_attrs = true, |
| }, |
| .probe = si2157_probe, |
| .remove = si2157_remove, |
| .id_table = si2157_id_table, |
| }; |
| |
| module_i2c_driver(si2157_driver); |
| |
| MODULE_DESCRIPTION("Silicon Labs Si2141/Si2146/2147/2148/2157/2158 silicon tuner driver"); |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(SI2158_A20_FIRMWARE); |
| MODULE_FIRMWARE(SI2141_A10_FIRMWARE); |
| MODULE_FIRMWARE(SI2157_A30_FIRMWARE); |
| MODULE_FIRMWARE(SI2141_60_FIRMWARE); |
| MODULE_FIRMWARE(SI2141_61_FIRMWARE); |
| MODULE_FIRMWARE(SI2146_11_FIRMWARE); |
| MODULE_FIRMWARE(SI2147_50_FIRMWARE); |
| MODULE_FIRMWARE(SI2148_32_FIRMWARE); |
| MODULE_FIRMWARE(SI2148_33_FIRMWARE); |
| MODULE_FIRMWARE(SI2157_50_FIRMWARE); |
| MODULE_FIRMWARE(SI2158_50_FIRMWARE); |
| MODULE_FIRMWARE(SI2158_51_FIRMWARE); |
| MODULE_FIRMWARE(SI2177_50_FIRMWARE); |