drivers/i2c/busses/i2c-designware-platdrv.c - third_party/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Synopsys DesignWare I2C adapter driver.
  *
  * Based on the TI DAVINCI I2C adapter driver.
  *
  * Copyright (C) 2006 Texas Instruments.
  * Copyright (C) 2007 MontaVista Software Inc.
  * Copyright (C) 2009 Provigent Ltd.
  */
 #include <linux/acpi.h>
 #include <linux/clk-provider.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
 #include <linux/units.h>

 #include "i2c-designware-core.h"

 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 {
 	return clk_get_rate(dev->clk) / KILO;
 }

 #ifdef CONFIG_ACPI
 static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT33C2", 0 },
 	{ "INT33C3", 0 },
 	{ "INT3432", 0 },
 	{ "INT3433", 0 },
 	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
 	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
 	{ "AMD0010", ACCESS_INTR_MASK },
 	{ "AMDI0010", ACCESS_INTR_MASK },
 	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
 	{ "AMDI0510", 0 },
 	{ "APMC0D0F", 0 },
 	{ "HISI02A1", 0 },
 	{ "HISI02A2", 0 },
 	{ "HISI02A3", 0 },
 	{ "HYGO0010", ACCESS_INTR_MASK },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
 #endif

 #ifdef CONFIG_OF
 #define BT1_I2C_CTL			0x100
 #define BT1_I2C_CTL_ADDR_MASK		GENMASK(7, 0)
 #define BT1_I2C_CTL_WR			BIT(8)
 #define BT1_I2C_CTL_GO			BIT(31)
 #define BT1_I2C_DI			0x104
 #define BT1_I2C_DO			0x108

 static int bt1_i2c_read(void *context, unsigned int reg, unsigned int *val)
 {
 	struct dw_i2c_dev *dev = context;
 	int ret;

 	/*
 	 * Note these methods shouldn't ever fail because the system controller
 	 * registers are memory mapped. We check the return value just in case.
 	 */
 	ret = regmap_write(dev->sysmap, BT1_I2C_CTL,
 			   BT1_I2C_CTL_GO | (reg & BT1_I2C_CTL_ADDR_MASK));
 	if (ret)
 		return ret;

 	return regmap_read(dev->sysmap, BT1_I2C_DO, val);
 }

 static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)
 {
 	struct dw_i2c_dev *dev = context;
 	int ret;

 	ret = regmap_write(dev->sysmap, BT1_I2C_DI, val);
 	if (ret)
 		return ret;

 	return regmap_write(dev->sysmap, BT1_I2C_CTL,
 		BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
 }

 static struct regmap_config bt1_i2c_cfg = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
 	.fast_io = true,
 	.reg_read = bt1_i2c_read,
 	.reg_write = bt1_i2c_write,
 	.max_register = DW_IC_COMP_TYPE,
 };

 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
 	dev->sysmap = syscon_node_to_regmap(dev->dev->of_node->parent);
 	if (IS_ERR(dev->sysmap))
 		return PTR_ERR(dev->sysmap);

 	dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg);
 	return PTR_ERR_OR_ZERO(dev->map);
 }

 #define MSCC_ICPU_CFG_TWI_DELAY		0x0
 #define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
 #define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4

 static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 {
 	writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
 	       dev->ext + MSCC_ICPU_CFG_TWI_DELAY);

 	return 0;
 }

 static int dw_i2c_of_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);

 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:
 		dev->ext = devm_platform_ioremap_resource(pdev, 1);
 		if (!IS_ERR(dev->ext))
 			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
 		break;
 	default:
 		break;
 	}

 	return 0;
 }

 static const struct of_device_id dw_i2c_of_match[] = {
 	{ .compatible = "snps,designware-i2c", },
 	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
 	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #else
 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
 	return -ENODEV;
 }

 static inline int dw_i2c_of_configure(struct platform_device *pdev)
 {
 	return -ENODEV;
 }
 #endif

 static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 {
 	pm_runtime_disable(dev->dev);

 	if (dev->shared_with_punit)
 		pm_runtime_put_noidle(dev->dev);
 }

 static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev->dev);
 	int ret;

 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_BAIKAL_BT1:
 		ret = bt1_i2c_request_regs(dev);
 		break;
 	default:
 		dev->base = devm_platform_ioremap_resource(pdev, 0);
 		ret = PTR_ERR_OR_ZERO(dev->base);
 		break;
 	}

 	return ret;
 }

 static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
 	{
 		.ident = "Qtechnology QT5222",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Qtechnology"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "QT5222"),
 		},
 	},
 	{ } /* terminate list */
 };

 static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = {
 #ifdef CONFIG_I2C_DESIGNWARE_BAYTRAIL
 	{
 		.probe = i2c_dw_baytrail_probe_lock_support,
 	},
 #endif
 #ifdef CONFIG_I2C_DESIGNWARE_AMDPSP
 	{
 		.probe = i2c_dw_amdpsp_probe_lock_support,
 		.remove = i2c_dw_amdpsp_remove_lock_support,
 	},
 #endif
 	{}
 };

 static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 {
 	const struct i2c_dw_semaphore_callbacks *ptr;
 	int i = 0;
 	int ret;

 	ptr = i2c_dw_semaphore_cb_table;

 	dev->semaphore_idx = -1;

 	while (ptr->probe) {
 		ret = ptr->probe(dev);
 		if (ret) {
 			/*
 			 * If there is no semaphore device attached to this
 			 * controller, we shouldn't abort general i2c_controller
 			 * probe.
 			 */
 			if (ret != -ENODEV)
 				return ret;

 			i++;
 			ptr++;
 			continue;
 		}

 		dev->semaphore_idx = i;
 		break;
 	}

 	return 0;
 }

 static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
 {
 	if (dev->semaphore_idx < 0)
 		return;

 	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
 		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
 }

 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
 	struct i2c_timings *t;
 	int irq, ret;

 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;

 	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;

 	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
 	platform_set_drvdata(pdev, dev);

 	ret = dw_i2c_plat_request_regs(dev);
 	if (ret)
 		return ret;

 	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(dev->rst))
 		return PTR_ERR(dev->rst);

 	reset_control_deassert(dev->rst);

 	t = &dev->timings;
 	i2c_parse_fw_timings(&pdev->dev, t, false);

 	i2c_dw_adjust_bus_speed(dev);

 	if (pdev->dev.of_node)
 		dw_i2c_of_configure(pdev);

 	if (has_acpi_companion(&pdev->dev))
 		i2c_dw_acpi_configure(&pdev->dev);

 	ret = i2c_dw_validate_speed(dev);
 	if (ret)
 		goto exit_reset;

 	ret = i2c_dw_probe_lock_support(dev);
 	if (ret)
 		goto exit_reset;

 	i2c_dw_configure(dev);

 	/* Optional interface clock */
 	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
 	if (IS_ERR(dev->pclk)) {
 		ret = PTR_ERR(dev->pclk);
 		goto exit_reset;
 	}

 	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		ret = PTR_ERR(dev->clk);
 		goto exit_reset;
 	}

 	ret = i2c_dw_prepare_clk(dev, true);
 	if (ret)
 		goto exit_reset;

 	if (dev->clk) {
 		u64 clk_khz;

 		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
 		clk_khz = dev->get_clk_rate_khz(dev);

 		if (!dev->sda_hold_time && t->sda_hold_ns)
 			dev->sda_hold_time =
 				DIV_S64_ROUND_CLOSEST(clk_khz * t->sda_hold_ns, MICRO);
 	}

 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
 					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
 	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->nr = -1;

 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
 					DPM_FLAG_MAY_SKIP_RESUME);
 	} else {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
 					DPM_FLAG_SMART_SUSPEND |
 					DPM_FLAG_MAY_SKIP_RESUME);
 	}

 	device_enable_async_suspend(&pdev->dev);

 	/* The code below assumes runtime PM to be disabled. */
 	WARN_ON(pm_runtime_enabled(&pdev->dev));

 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);

 	if (dev->shared_with_punit)
 		pm_runtime_get_noresume(&pdev->dev);

 	pm_runtime_enable(&pdev->dev);

 	ret = i2c_dw_probe(dev);
 	if (ret)
 		goto exit_probe;

 	return ret;

 exit_probe:
 	dw_i2c_plat_pm_cleanup(dev);
 exit_reset:
 	reset_control_assert(dev->rst);
 	return ret;
 }

 static int dw_i2c_plat_remove(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);

 	pm_runtime_get_sync(&pdev->dev);

 	i2c_del_adapter(&dev->adapter);

 	dev->disable(dev);

 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	dw_i2c_plat_pm_cleanup(dev);

 	i2c_dw_remove_lock_support(dev);

 	reset_control_assert(dev->rst);

 	return 0;
 }

 #ifdef CONFIG_PM_SLEEP
 static int dw_i2c_plat_prepare(struct device *dev)
 {
 	/*
 	 * If the ACPI companion device object is present for this device, it
 	 * may be accessed during suspend and resume of other devices via I2C
 	 * operation regions, so tell the PM core and middle layers to avoid
 	 * skipping system suspend/resume callbacks for it in that case.
 	 */
 	return !has_acpi_companion(dev);
 }

 static void dw_i2c_plat_complete(struct device *dev)
 {
 	/*
 	 * The device can only be in runtime suspend at this point if it has not
 	 * been resumed throughout the ending system suspend/resume cycle, so if
 	 * the platform firmware might mess up with it, request the runtime PM
 	 * framework to resume it.
 	 */
 	if (pm_runtime_suspended(dev) && pm_resume_via_firmware())
 		pm_request_resume(dev);
 }
 #else
 #define dw_i2c_plat_prepare	NULL
 #define dw_i2c_plat_complete	NULL
 #endif

 #ifdef CONFIG_PM
 static int dw_i2c_plat_runtime_suspend(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

 	if (i_dev->shared_with_punit)
 		return 0;

 	i_dev->disable(i_dev);
 	i2c_dw_prepare_clk(i_dev, false);

 	return 0;
 }

 static int __maybe_unused dw_i2c_plat_suspend(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

 	i2c_mark_adapter_suspended(&i_dev->adapter);

 	return dw_i2c_plat_runtime_suspend(dev);
 }

 static int dw_i2c_plat_runtime_resume(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

 	if (!i_dev->shared_with_punit)
 		i2c_dw_prepare_clk(i_dev, true);

 	i_dev->init(i_dev);

 	return 0;
 }

 static int __maybe_unused dw_i2c_plat_resume(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

 	dw_i2c_plat_runtime_resume(dev);
 	i2c_mark_adapter_resumed(&i_dev->adapter);

 	return 0;
 }

 static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
 	.complete = dw_i2c_plat_complete,
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
 	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
 };

 #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
 #else
 #define DW_I2C_DEV_PMOPS NULL
 #endif

 /* Work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");

 static struct platform_driver dw_i2c_driver = {
 	.probe = dw_i2c_plat_probe,
 	.remove = dw_i2c_plat_remove,
 	.driver		= {
 		.name	= "i2c_designware",
 		.of_match_table = of_match_ptr(dw_i2c_of_match),
 		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
 		.pm	= DW_I2C_DEV_PMOPS,
 	},
 };

 static int __init dw_i2c_init_driver(void)
 {
 	return platform_driver_register(&dw_i2c_driver);
 }
 subsys_initcall(dw_i2c_init_driver);

 static void __exit dw_i2c_exit_driver(void)
 {
 	platform_driver_unregister(&dw_i2c_driver);
 }
 module_exit(dw_i2c_exit_driver);

 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* Synopsys DesignWare I2C adapter driver.
	*
	* Based on the TI DAVINCI I2C adapter driver.
	*
	* Copyright (C) 2006 Texas Instruments.
	* Copyright (C) 2007 MontaVista Software Inc.
	* Copyright (C) 2009 Provigent Ltd.
	*/
	#include <linux/acpi.h>
	#include <linux/clk-provider.h>
	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/dmi.h>
	#include <linux/err.h>
	#include <linux/errno.h>
	#include <linux/i2c.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/mfd/syscon.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/pm.h>
	#include <linux/pm_runtime.h>
	#include <linux/property.h>
	#include <linux/regmap.h>
	#include <linux/reset.h>
	#include <linux/sched.h>
	#include <linux/slab.h>
	#include <linux/suspend.h>
	#include <linux/units.h>

	#include "i2c-designware-core.h"

	static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
	{
	return clk_get_rate(dev->clk) / KILO;
	}

	#ifdef CONFIG_ACPI
	static const struct acpi_device_id dw_i2c_acpi_match[] = {
	{ "INT33C2", 0 },
	{ "INT33C3", 0 },
	{ "INT3432", 0 },
	{ "INT3433", 0 },
	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
	{ "AMD0010", ACCESS_INTR_MASK },
	{ "AMDI0010", ACCESS_INTR_MASK },
	{ "AMDI0019", ACCESS_INTR_MASK \| ARBITRATION_SEMAPHORE },
	{ "AMDI0510", 0 },
	{ "APMC0D0F", 0 },
	{ "HISI02A1", 0 },
	{ "HISI02A2", 0 },
	{ "HISI02A3", 0 },
	{ "HYGO0010", ACCESS_INTR_MASK },
	{ }
	};
	MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
	#endif

	#ifdef CONFIG_OF
	#define BT1_I2C_CTL 0x100
	#define BT1_I2C_CTL_ADDR_MASK GENMASK(7, 0)
	#define BT1_I2C_CTL_WR BIT(8)
	#define BT1_I2C_CTL_GO BIT(31)
	#define BT1_I2C_DI 0x104
	#define BT1_I2C_DO 0x108

	static int bt1_i2c_read(void context, unsigned int reg, unsigned int val)
	{
	struct dw_i2c_dev *dev = context;
	int ret;

	/*
	* Note these methods shouldn't ever fail because the system controller
	* registers are memory mapped. We check the return value just in case.
	*/
	ret = regmap_write(dev->sysmap, BT1_I2C_CTL,
	BT1_I2C_CTL_GO \| (reg & BT1_I2C_CTL_ADDR_MASK));
	if (ret)
	return ret;

	return regmap_read(dev->sysmap, BT1_I2C_DO, val);
	}

	static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)
	{
	struct dw_i2c_dev *dev = context;
	int ret;

	ret = regmap_write(dev->sysmap, BT1_I2C_DI, val);
	if (ret)
	return ret;

	return regmap_write(dev->sysmap, BT1_I2C_CTL,
	BT1_I2C_CTL_GO \| BT1_I2C_CTL_WR \| (reg & BT1_I2C_CTL_ADDR_MASK));
	}

	static struct regmap_config bt1_i2c_cfg = {
	.reg_bits = 32,
	.val_bits = 32,
	.reg_stride = 4,
	.fast_io = true,
	.reg_read = bt1_i2c_read,
	.reg_write = bt1_i2c_write,
	.max_register = DW_IC_COMP_TYPE,
	};

	static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
	{
	dev->sysmap = syscon_node_to_regmap(dev->dev->of_node->parent);
	if (IS_ERR(dev->sysmap))
	return PTR_ERR(dev->sysmap);

	dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg);
	return PTR_ERR_OR_ZERO(dev->map);
	}

	#define MSCC_ICPU_CFG_TWI_DELAY 0x0
	#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0)
	#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4

	static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
	{
	writel((dev->sda_hold_time << 1) \| MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
	dev->ext + MSCC_ICPU_CFG_TWI_DELAY);

	return 0;
	}

	static int dw_i2c_of_configure(struct platform_device *pdev)
	{
	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);

	switch (dev->flags & MODEL_MASK) {
	case MODEL_MSCC_OCELOT:
	dev->ext = devm_platform_ioremap_resource(pdev, 1);
	if (!IS_ERR(dev->ext))
	dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
	break;
	default:
	break;
	}

	return 0;
	}

	static const struct of_device_id dw_i2c_of_match[] = {
	{ .compatible = "snps,designware-i2c", },
	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
	{},
	};
	MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
	#else
	static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
	{
	return -ENODEV;
	}

	static inline int dw_i2c_of_configure(struct platform_device *pdev)
	{
	return -ENODEV;
	}
	#endif

	static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
	{
	pm_runtime_disable(dev->dev);

	if (dev->shared_with_punit)
	pm_runtime_put_noidle(dev->dev);
	}

	static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
	{
	struct platform_device *pdev = to_platform_device(dev->dev);
	int ret;

	switch (dev->flags & MODEL_MASK) {
	case MODEL_BAIKAL_BT1:
	ret = bt1_i2c_request_regs(dev);
	break;
	default:
	dev->base = devm_platform_ioremap_resource(pdev, 0);
	ret = PTR_ERR_OR_ZERO(dev->base);
	break;
	}

	return ret;
	}

	static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
	{
	.ident = "Qtechnology QT5222",
	.matches = {
	DMI_MATCH(DMI_SYS_VENDOR, "Qtechnology"),
	DMI_MATCH(DMI_PRODUCT_NAME, "QT5222"),
	},
	},
	{ } /* terminate list */
	};

	static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = {
	#ifdef CONFIG_I2C_DESIGNWARE_BAYTRAIL
	{
	.probe = i2c_dw_baytrail_probe_lock_support,
	},
	#endif
	#ifdef CONFIG_I2C_DESIGNWARE_AMDPSP
	{
	.probe = i2c_dw_amdpsp_probe_lock_support,
	.remove = i2c_dw_amdpsp_remove_lock_support,
	},
	#endif
	{}
	};

	static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
	{
	const struct i2c_dw_semaphore_callbacks *ptr;
	int i = 0;
	int ret;

	ptr = i2c_dw_semaphore_cb_table;

	dev->semaphore_idx = -1;

	while (ptr->probe) {
	ret = ptr->probe(dev);
	if (ret) {
	/*
	* If there is no semaphore device attached to this
	* controller, we shouldn't abort general i2c_controller
	* probe.
	*/
	if (ret != -ENODEV)
	return ret;

	i++;
	ptr++;
	continue;
	}

	dev->semaphore_idx = i;
	break;
	}

	return 0;
	}

	static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
	{
	if (dev->semaphore_idx < 0)
	return;

	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
	i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
	}

	static int dw_i2c_plat_probe(struct platform_device *pdev)
	{
	struct i2c_adapter *adap;
	struct dw_i2c_dev *dev;
	struct i2c_timings *t;
	int irq, ret;

	irq = platform_get_irq(pdev, 0);
	if (irq < 0)
	return irq;

	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
	if (!dev)
	return -ENOMEM;

	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
	dev->dev = &pdev->dev;
	dev->irq = irq;
	platform_set_drvdata(pdev, dev);

	ret = dw_i2c_plat_request_regs(dev);
	if (ret)
	return ret;

	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
	if (IS_ERR(dev->rst))
	return PTR_ERR(dev->rst);

	reset_control_deassert(dev->rst);

	t = &dev->timings;
	i2c_parse_fw_timings(&pdev->dev, t, false);

	i2c_dw_adjust_bus_speed(dev);

	if (pdev->dev.of_node)
	dw_i2c_of_configure(pdev);

	if (has_acpi_companion(&pdev->dev))
	i2c_dw_acpi_configure(&pdev->dev);

	ret = i2c_dw_validate_speed(dev);
	if (ret)
	goto exit_reset;

	ret = i2c_dw_probe_lock_support(dev);
	if (ret)
	goto exit_reset;

	i2c_dw_configure(dev);

	/* Optional interface clock */
	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
	if (IS_ERR(dev->pclk)) {
	ret = PTR_ERR(dev->pclk);
	goto exit_reset;
	}

	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
	if (IS_ERR(dev->clk)) {
	ret = PTR_ERR(dev->clk);
	goto exit_reset;
	}

	ret = i2c_dw_prepare_clk(dev, true);
	if (ret)
	goto exit_reset;

	if (dev->clk) {
	u64 clk_khz;

	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
	clk_khz = dev->get_clk_rate_khz(dev);

	if (!dev->sda_hold_time && t->sda_hold_ns)
	dev->sda_hold_time =
	DIV_S64_ROUND_CLOSEST(clk_khz * t->sda_hold_ns, MICRO);
	}

	adap = &dev->adapter;
	adap->owner = THIS_MODULE;
	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
	I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
	adap->dev.of_node = pdev->dev.of_node;
	adap->nr = -1;

	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
	dev_pm_set_driver_flags(&pdev->dev,
	DPM_FLAG_SMART_PREPARE \|
	DPM_FLAG_MAY_SKIP_RESUME);
	} else {
	dev_pm_set_driver_flags(&pdev->dev,
	DPM_FLAG_SMART_PREPARE \|
	DPM_FLAG_SMART_SUSPEND \|
	DPM_FLAG_MAY_SKIP_RESUME);
	}

	device_enable_async_suspend(&pdev->dev);

	/* The code below assumes runtime PM to be disabled. */
	WARN_ON(pm_runtime_enabled(&pdev->dev));

	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
	pm_runtime_use_autosuspend(&pdev->dev);
	pm_runtime_set_active(&pdev->dev);

	if (dev->shared_with_punit)
	pm_runtime_get_noresume(&pdev->dev);

	pm_runtime_enable(&pdev->dev);

	ret = i2c_dw_probe(dev);
	if (ret)
	goto exit_probe;

	return ret;

	exit_probe:
	dw_i2c_plat_pm_cleanup(dev);
	exit_reset:
	reset_control_assert(dev->rst);
	return ret;
	}

	static int dw_i2c_plat_remove(struct platform_device *pdev)
	{
	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);

	pm_runtime_get_sync(&pdev->dev);

	i2c_del_adapter(&dev->adapter);

	dev->disable(dev);

	pm_runtime_dont_use_autosuspend(&pdev->dev);
	pm_runtime_put_sync(&pdev->dev);
	dw_i2c_plat_pm_cleanup(dev);

	i2c_dw_remove_lock_support(dev);

	reset_control_assert(dev->rst);

	return 0;
	}

	#ifdef CONFIG_PM_SLEEP
	static int dw_i2c_plat_prepare(struct device *dev)
	{
	/*
	* If the ACPI companion device object is present for this device, it
	* may be accessed during suspend and resume of other devices via I2C
	* operation regions, so tell the PM core and middle layers to avoid
	* skipping system suspend/resume callbacks for it in that case.
	*/
	return !has_acpi_companion(dev);
	}

	static void dw_i2c_plat_complete(struct device *dev)
	{
	/*
	* The device can only be in runtime suspend at this point if it has not
	* been resumed throughout the ending system suspend/resume cycle, so if
	* the platform firmware might mess up with it, request the runtime PM
	* framework to resume it.
	*/
	if (pm_runtime_suspended(dev) && pm_resume_via_firmware())
	pm_request_resume(dev);
	}
	#else
	#define dw_i2c_plat_prepare NULL
	#define dw_i2c_plat_complete NULL
	#endif

	#ifdef CONFIG_PM
	static int dw_i2c_plat_runtime_suspend(struct device *dev)
	{
	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

	if (i_dev->shared_with_punit)
	return 0;

	i_dev->disable(i_dev);
	i2c_dw_prepare_clk(i_dev, false);

	return 0;
	}

	static int __maybe_unused dw_i2c_plat_suspend(struct device *dev)
	{
	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

	i2c_mark_adapter_suspended(&i_dev->adapter);

	return dw_i2c_plat_runtime_suspend(dev);
	}

	static int dw_i2c_plat_runtime_resume(struct device *dev)
	{
	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

	if (!i_dev->shared_with_punit)
	i2c_dw_prepare_clk(i_dev, true);

	i_dev->init(i_dev);

	return 0;
	}

	static int __maybe_unused dw_i2c_plat_resume(struct device *dev)
	{
	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);

	dw_i2c_plat_runtime_resume(dev);
	i2c_mark_adapter_resumed(&i_dev->adapter);

	return 0;
	}

	static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
	.prepare = dw_i2c_plat_prepare,
	.complete = dw_i2c_plat_complete,
	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
	};

	#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
	#else
	#define DW_I2C_DEV_PMOPS NULL
	#endif

	/* Work with hotplug and coldplug */
	MODULE_ALIAS("platform:i2c_designware");

	static struct platform_driver dw_i2c_driver = {
	.probe = dw_i2c_plat_probe,
	.remove = dw_i2c_plat_remove,
	.driver = {
	.name = "i2c_designware",
	.of_match_table = of_match_ptr(dw_i2c_of_match),
	.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
	.pm = DW_I2C_DEV_PMOPS,
	},
	};

	static int __init dw_i2c_init_driver(void)
	{
	return platform_driver_register(&dw_i2c_driver);
	}
	subsys_initcall(dw_i2c_init_driver);

	static void __exit dw_i2c_exit_driver(void)
	{
	platform_driver_unregister(&dw_i2c_driver);
	}
	module_exit(dw_i2c_exit_driver);

	MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
	MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
	MODULE_LICENSE("GPL");