| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Driver for Delta DPS920AB PSU | |
| * | |
| * Copyright (C) 2021 Delta Networks, Inc. | |
| * Copyright (C) 2021 Sartura Ltd. | |
| */ | |
| #include <linux/debugfs.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/of_device.h> | |
| #include "pmbus.h" | |
| struct dps920ab_data { | |
| char *mfr_model; | |
| char *mfr_id; | |
| }; | |
| static int dps920ab_read_word_data(struct i2c_client *client, int page, int phase, int reg) | |
| { | |
| /* | |
| * This masks commands which are not supported. | |
| * PSU advertises that all features are supported, | |
| * in reality that unfortunately is not true. | |
| * So enable only those that the datasheet confirms. | |
| */ | |
| switch (reg) { | |
| case PMBUS_FAN_COMMAND_1: | |
| case PMBUS_IOUT_OC_WARN_LIMIT: | |
| case PMBUS_STATUS_WORD: | |
| case PMBUS_READ_VIN: | |
| case PMBUS_READ_IIN: | |
| case PMBUS_READ_VOUT: | |
| case PMBUS_READ_IOUT: | |
| case PMBUS_READ_TEMPERATURE_1: | |
| case PMBUS_READ_TEMPERATURE_2: | |
| case PMBUS_READ_TEMPERATURE_3: | |
| case PMBUS_READ_FAN_SPEED_1: | |
| case PMBUS_READ_POUT: | |
| case PMBUS_READ_PIN: | |
| case PMBUS_MFR_VOUT_MIN: | |
| case PMBUS_MFR_VOUT_MAX: | |
| case PMBUS_MFR_IOUT_MAX: | |
| case PMBUS_MFR_POUT_MAX: | |
| return pmbus_read_word_data(client, page, phase, reg); | |
| default: | |
| return -ENXIO; | |
| } | |
| } | |
| static int dps920ab_write_word_data(struct i2c_client *client, int page, int reg, | |
| u16 word) | |
| { | |
| /* | |
| * This masks commands which are not supported. | |
| * PSU only has one R/W register and that is | |
| * for the fan. | |
| */ | |
| switch (reg) { | |
| case PMBUS_FAN_COMMAND_1: | |
| return pmbus_write_word_data(client, page, reg, word); | |
| default: | |
| return -EACCES; | |
| } | |
| } | |
| static struct pmbus_driver_info dps920ab_info = { | |
| .pages = 1, | |
| .format[PSC_VOLTAGE_IN] = linear, | |
| .format[PSC_VOLTAGE_OUT] = linear, | |
| .format[PSC_CURRENT_IN] = linear, | |
| .format[PSC_CURRENT_OUT] = linear, | |
| .format[PSC_POWER] = linear, | |
| .format[PSC_FAN] = linear, | |
| .format[PSC_TEMPERATURE] = linear, | |
| .func[0] = | |
| PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | | |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | | |
| PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | | |
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT | | |
| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP, | |
| .read_word_data = dps920ab_read_word_data, | |
| .write_word_data = dps920ab_write_word_data, | |
| }; | |
| static int dps920ab_mfr_id_show(struct seq_file *s, void *data) | |
| { | |
| struct dps920ab_data *priv = s->private; | |
| seq_printf(s, "%s\n", priv->mfr_id); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_id); | |
| static int dps920ab_mfr_model_show(struct seq_file *s, void *data) | |
| { | |
| struct dps920ab_data *priv = s->private; | |
| seq_printf(s, "%s\n", priv->mfr_model); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_model); | |
| static void dps920ab_init_debugfs(struct dps920ab_data *data, struct i2c_client *client) | |
| { | |
| struct dentry *debugfs_dir; | |
| struct dentry *root; | |
| root = pmbus_get_debugfs_dir(client); | |
| if (!root) | |
| return; | |
| debugfs_dir = debugfs_create_dir(client->name, root); | |
| debugfs_create_file("mfr_id", | |
| 0400, | |
| debugfs_dir, | |
| data, | |
| &dps920ab_mfr_id_fops); | |
| debugfs_create_file("mfr_model", | |
| 0400, | |
| debugfs_dir, | |
| data, | |
| &dps920ab_mfr_model_fops); | |
| } | |
| static int dps920ab_probe(struct i2c_client *client) | |
| { | |
| u8 buf[I2C_SMBUS_BLOCK_MAX + 1]; | |
| struct dps920ab_data *data; | |
| int ret; | |
| data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "Failed to read Manufacturer ID\n"); | |
| return ret; | |
| } | |
| buf[ret] = '\0'; | |
| if (ret != 5 || strncmp(buf, "DELTA", 5)) { | |
| buf[ret] = '\0'; | |
| dev_err(&client->dev, "Unsupported Manufacturer ID '%s'\n", buf); | |
| return -ENODEV; | |
| } | |
| data->mfr_id = devm_kstrdup(&client->dev, buf, GFP_KERNEL); | |
| if (!data->mfr_id) | |
| return -ENOMEM; | |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); | |
| if (ret < 0) { | |
| dev_err(&client->dev, "Failed to read Manufacturer Model\n"); | |
| return ret; | |
| } | |
| buf[ret] = '\0'; | |
| if (ret != 11 || strncmp(buf, "DPS-920AB", 9)) { | |
| dev_err(&client->dev, "Unsupported Manufacturer Model '%s'\n", buf); | |
| return -ENODEV; | |
| } | |
| data->mfr_model = devm_kstrdup(&client->dev, buf, GFP_KERNEL); | |
| if (!data->mfr_model) | |
| return -ENOMEM; | |
| ret = pmbus_do_probe(client, &dps920ab_info); | |
| if (ret) | |
| return ret; | |
| dps920ab_init_debugfs(data, client); | |
| return 0; | |
| } | |
| static const struct of_device_id __maybe_unused dps920ab_of_match[] = { | |
| { .compatible = "delta,dps920ab", }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, dps920ab_of_match); | |
| static struct i2c_driver dps920ab_driver = { | |
| .driver = { | |
| .name = "dps920ab", | |
| .of_match_table = of_match_ptr(dps920ab_of_match), | |
| }, | |
| .probe_new = dps920ab_probe, | |
| }; | |
| module_i2c_driver(dps920ab_driver); | |
| MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>"); | |
| MODULE_DESCRIPTION("PMBus driver for Delta DPS920AB PSU"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_IMPORT_NS(PMBUS); |