| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # PMBus chip drivers configuration | |
| # | |
| menuconfig PMBUS | |
| tristate "PMBus support" | |
| depends on I2C | |
| help | |
| Say yes here if you want to enable PMBus support. | |
| This driver can also be built as a module. If so, the module will | |
| be called pmbus_core. | |
| if PMBUS | |
| config SENSORS_PMBUS | |
| tristate "Generic PMBus devices" | |
| default y | |
| help | |
| If you say yes here you get hardware monitoring support for generic | |
| PMBus devices, including but not limited to ADP4000, BMR310, BMR453, | |
| BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492, | |
| MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, | |
| TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020. | |
| This driver can also be built as a module. If so, the module will | |
| be called pmbus. | |
| config SENSORS_ADM1266 | |
| tristate "Analog Devices ADM1266 Sequencer" | |
| select CRC8 | |
| depends on GPIOLIB | |
| help | |
| If you say yes here you get hardware monitoring support for Analog | |
| Devices ADM1266 Cascadable Super Sequencer. | |
| This driver can also be built as a module. If so, the module will | |
| be called adm1266. | |
| config SENSORS_ADM1275 | |
| tristate "Analog Devices ADM1275 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Analog | |
| Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, | |
| and ADM1294 Hot-Swap Controller and Digital Power Monitors. | |
| This driver can also be built as a module. If so, the module will | |
| be called adm1275. | |
| config SENSORS_BEL_PFE | |
| tristate "Bel PFE Compatible Power Supplies" | |
| help | |
| If you say yes here you get hardware monitoring support for BEL | |
| PFE1100 and PFE3000 Power Supplies. | |
| This driver can also be built as a module. If so, the module will | |
| be called bel-pfe. | |
| config SENSORS_BPA_RS600 | |
| tristate "BluTek BPA-RS600 Power Supplies" | |
| help | |
| If you say yes here you get hardware monitoring support for BluTek | |
| BPA-RS600 Power Supplies. | |
| This driver can also be built as a module. If so, the module will | |
| be called bpa-rs600. | |
| config SENSORS_DELTA_AHE50DC_FAN | |
| tristate "Delta AHE-50DC fan control module" | |
| help | |
| If you say yes here you get hardware monitoring support for | |
| the integrated fan control module of the Delta AHE-50DC | |
| Open19 power shelf. | |
| This driver can also be built as a module. If so, the module | |
| will be called delta-ahe50dc-fan. | |
| config SENSORS_FSP_3Y | |
| tristate "FSP/3Y-Power power supplies" | |
| help | |
| If you say yes here you get hardware monitoring support for | |
| FSP/3Y-Power hot-swap power supplies. | |
| Supported models: YH-5151E, YM-2151E | |
| This driver can also be built as a module. If so, the module will | |
| be called fsp-3y. | |
| config SENSORS_IBM_CFFPS | |
| tristate "IBM Common Form Factor Power Supply" | |
| depends on LEDS_CLASS | |
| help | |
| If you say yes here you get hardware monitoring support for the IBM | |
| Common Form Factor power supply. | |
| This driver can also be built as a module. If so, the module will | |
| be called ibm-cffps. | |
| config SENSORS_DPS920AB | |
| tristate "Delta DPS920AB Power Supply" | |
| help | |
| If you say yes here you get hardware monitoring support for Delta | |
| DPS920AB Power Supplies. | |
| This driver can also be built as a module. If so, the module will | |
| be called dps920ab. | |
| config SENSORS_INSPUR_IPSPS | |
| tristate "INSPUR Power System Power Supply" | |
| help | |
| If you say yes here you get hardware monitoring support for the INSPUR | |
| Power System power supply. | |
| This driver can also be built as a module. If so, the module will | |
| be called inspur-ipsps. | |
| config SENSORS_IR35221 | |
| tristate "Infineon IR35221" | |
| help | |
| If you say yes here you get hardware monitoring support for the | |
| Infineon IR35221 controller. | |
| This driver can also be built as a module. If so, the module will | |
| be called ir35221. | |
| config SENSORS_IR36021 | |
| tristate "Infineon IR36021" | |
| help | |
| If you say yes here you get hardware monitoring support for Infineon | |
| IR36021. | |
| This driver can also be built as a module. If so, the module will | |
| be called ir36021. | |
| config SENSORS_IR38064 | |
| tristate "Infineon IR38064 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Infineon | |
| IR38060, IR38064, IR38164 and IR38263. | |
| This driver can also be built as a module. If so, the module will | |
| be called ir38064. | |
| config SENSORS_IR38064_REGULATOR | |
| bool "Regulator support for IR38064 and compatibles" | |
| depends on SENSORS_IR38064 && REGULATOR | |
| help | |
| Uses the IR38064 or compatible as regulator. | |
| config SENSORS_IRPS5401 | |
| tristate "Infineon IRPS5401" | |
| help | |
| If you say yes here you get hardware monitoring support for the | |
| Infineon IRPS5401 controller. | |
| This driver can also be built as a module. If so, the module will | |
| be called irps5401. | |
| config SENSORS_ISL68137 | |
| tristate "Renesas Digital Multiphase Voltage Regulators" | |
| help | |
| If you say yes here you get hardware monitoring support for Renesas | |
| digital multiphase voltage regulators. | |
| This driver can also be built as a module. If so, the module will | |
| be called isl68137. | |
| config SENSORS_LM25066 | |
| tristate "National Semiconductor LM25066 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for National | |
| Semiconductor LM25056, LM25066, LM5064, and LM5066. | |
| This driver can also be built as a module. If so, the module will | |
| be called lm25066. | |
| config SENSORS_LM25066_REGULATOR | |
| bool "Regulator support for LM25066 and compatibles" | |
| depends on SENSORS_LM25066 && REGULATOR | |
| help | |
| If you say yes here you get regulator support for National | |
| Semiconductor LM25066, LM5064, and LM5066. | |
| config SENSORS_LT7182S | |
| tristate "Analog Devices LT7182S" | |
| help | |
| If you say yes here you get hardware monitoring support for Analog | |
| Devices LT7182S. | |
| This driver can also be built as a module. If so, the module will | |
| be called lt7182s. | |
| config SENSORS_LTC2978 | |
| tristate "Linear Technologies LTC2978 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Linear | |
| Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979, | |
| LTC2980, and LTM2987. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2978. | |
| config SENSORS_LTC2978_REGULATOR | |
| bool "Regulator support for LTC2978 and compatibles" | |
| depends on SENSORS_LTC2978 && REGULATOR | |
| help | |
| If you say yes here you get regulator support for Linear Technology | |
| LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880, | |
| LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686, | |
| and LTM4700. | |
| config SENSORS_LTC3815 | |
| tristate "Linear Technologies LTC3815" | |
| help | |
| If you say yes here you get hardware monitoring support for Linear | |
| Technology LTC3815. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc3815. | |
| config SENSORS_MAX15301 | |
| tristate "Maxim MAX15301" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX15301, as well as for Flex BMR461. | |
| This driver can also be built as a module. If so, the module will | |
| be called max15301. | |
| config SENSORS_MAX16064 | |
| tristate "Maxim MAX16064" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX16064. | |
| This driver can also be built as a module. If so, the module will | |
| be called max16064. | |
| config SENSORS_MAX16601 | |
| tristate "Maxim MAX16508, MAX16601, MAX16602" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX16508, MAX16601 and MAX16602. | |
| This driver can also be built as a module. If so, the module will | |
| be called max16601. | |
| config SENSORS_MAX20730 | |
| tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX20710, MAX20730, MAX20734, and MAX20743. | |
| This driver can also be built as a module. If so, the module will | |
| be called max20730. | |
| config SENSORS_MAX20751 | |
| tristate "Maxim MAX20751" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX20751. | |
| This driver can also be built as a module. If so, the module will | |
| be called max20751. | |
| config SENSORS_MAX31785 | |
| tristate "Maxim MAX31785 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX31785. | |
| This driver can also be built as a module. If so, the module will | |
| be called max31785. | |
| config SENSORS_MAX34440 | |
| tristate "Maxim MAX34440 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. | |
| This driver can also be built as a module. If so, the module will | |
| be called max34440. | |
| config SENSORS_MAX8688 | |
| tristate "Maxim MAX8688" | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX8688. | |
| This driver can also be built as a module. If so, the module will | |
| be called max8688. | |
| config SENSORS_MP2888 | |
| tristate "MPS MP2888" | |
| help | |
| If you say yes here you get hardware monitoring support for MPS | |
| MP2888 Digital, Multi-Phase, Pulse-Width Modulation Controller. | |
| This driver can also be built as a module. If so, the module will | |
| be called mp2888. | |
| config SENSORS_MP2975 | |
| tristate "MPS MP2975" | |
| help | |
| If you say yes here you get hardware monitoring support for MPS | |
| MP2975 Dual Loop Digital Multi-Phase Controller. | |
| This driver can also be built as a module. If so, the module will | |
| be called mp2975. | |
| config SENSORS_MP5023 | |
| tristate "MPS MP5023" | |
| help | |
| If you say yes here you get hardware monitoring support for MPS | |
| MP5023. | |
| This driver can also be built as a module. If so, the module will | |
| be called mp5023. | |
| config SENSORS_PIM4328 | |
| tristate "Flex PIM4328 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Flex | |
| PIM4328, PIM4820 and PIM4006 Power Interface Modules. | |
| This driver can also be built as a module. If so, the module will | |
| be called pim4328. | |
| config SENSORS_PLI1209BC | |
| tristate "Vicor PLI1209BC" | |
| help | |
| If you say yes here you get hardware monitoring support for Vicor | |
| PLI1209BC Digital Supervisor. | |
| This driver can also be built as a module. If so, the module will | |
| be called pli1209bc. | |
| config SENSORS_PLI1209BC_REGULATOR | |
| bool "Regulator support for PLI1209BC" | |
| depends on SENSORS_PLI1209BC && REGULATOR | |
| help | |
| If you say yes here you get regulator support for Vicor PLI1209BC | |
| Digital Supervisor. | |
| config SENSORS_PM6764TR | |
| tristate "ST PM6764TR" | |
| help | |
| If you say yes here you get hardware monitoring support for ST | |
| PM6764TR. | |
| This driver can also be built as a module. If so, the module will | |
| be called pm6764tr. | |
| config SENSORS_PXE1610 | |
| tristate "Infineon PXE1610" | |
| help | |
| If you say yes here you get hardware monitoring support for Infineon | |
| PXE1610. | |
| This driver can also be built as a module. If so, the module will | |
| be called pxe1610. | |
| config SENSORS_Q54SJ108A2 | |
| tristate "Delta Power Supplies Q54SJ108A2" | |
| help | |
| If you say yes here you get hardware monitoring support for Delta | |
| Q54SJ108A2 series Power Supplies. | |
| This driver can also be built as a module. If so, the module will | |
| be called q54sj108a2. | |
| config SENSORS_STPDDC60 | |
| tristate "ST STPDDC60" | |
| help | |
| If you say yes here you get hardware monitoring support for ST | |
| STPDDC60 Universal Digital Multicell Controller, as well as for | |
| Flex BMR481. | |
| This driver can also be built as a module. If so, the module will | |
| be called stpddc60. | |
| config SENSORS_TPS40422 | |
| tristate "TI TPS40422" | |
| help | |
| If you say yes here you get hardware monitoring support for TI | |
| TPS40422. | |
| This driver can also be built as a module. If so, the module will | |
| be called tps40422. | |
| config SENSORS_TPS53679 | |
| tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688" | |
| help | |
| If you say yes here you get hardware monitoring support for TI | |
| TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688. | |
| This driver can also be built as a module. If so, the module will | |
| be called tps53679. | |
| config SENSORS_UCD9000 | |
| tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910" | |
| help | |
| If you say yes here you get hardware monitoring support for TI | |
| UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer | |
| and System Health Controllers. | |
| This driver can also be built as a module. If so, the module will | |
| be called ucd9000. | |
| config SENSORS_UCD9200 | |
| tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" | |
| help | |
| If you say yes here you get hardware monitoring support for TI | |
| UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 | |
| Digital PWM System Controllers. | |
| This driver can also be built as a module. If so, the module will | |
| be called ucd9200. | |
| config SENSORS_XDPE152 | |
| tristate "Infineon XDPE152 family" | |
| help | |
| If you say yes here you get hardware monitoring support for Infineon | |
| XDPE15284, XDPE152C4, device. | |
| This driver can also be built as a module. If so, the module will | |
| be called xdpe152c4. | |
| config SENSORS_XDPE122 | |
| tristate "Infineon XDPE122 family" | |
| help | |
| If you say yes here you get hardware monitoring support for Infineon | |
| XDPE12254, XDPE12284, device. | |
| This driver can also be built as a module. If so, the module will | |
| be called xdpe12284. | |
| config SENSORS_XDPE122_REGULATOR | |
| bool "Regulator support for XDPE122 and compatibles" | |
| depends on SENSORS_XDPE122 && REGULATOR | |
| help | |
| Uses the xdpe12284 or compatible as regulator. | |
| config SENSORS_ZL6100 | |
| tristate "Intersil ZL6100 and compatibles" | |
| help | |
| If you say yes here you get hardware monitoring support for Intersil | |
| ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105, | |
| ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for | |
| Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464. | |
| This driver can also be built as a module. If so, the module will | |
| be called zl6100. | |
| endif # PMBUS |