| # SPDX-License-Identifier: GPL-2.0-only | |
| config DRM_PANEL | |
| bool | |
| depends on DRM | |
| help | |
| Panel registration and lookup framework. | |
| menu "Display Panels" | |
| depends on DRM && DRM_PANEL | |
| config DRM_PANEL_ABT_Y030XX067A | |
| tristate "ABT Y030XX067A 320x480 LCD panel" | |
| depends on OF && SPI | |
| select REGMAP_SPI | |
| help | |
| Say Y here to enable support for the Asia Better Technology Ltd. | |
| Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 | |
| and RG-99 handheld gaming consoles. | |
| config DRM_PANEL_ARM_VERSATILE | |
| tristate "ARM Versatile panel driver" | |
| depends on OF | |
| depends on MFD_SYSCON | |
| select VIDEOMODE_HELPERS | |
| help | |
| This driver supports the ARM Versatile panels connected to ARM | |
| reference designs. The panel is detected using special registers | |
| in the Versatile family syscon registers. | |
| config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 | |
| tristate "ASUS Z00T TM5P5 NT35596 panel" | |
| depends on GPIOLIB && OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the ASUS TMP5P5 | |
| NT35596 1080x1920 video mode panel as found in some Asus | |
| Zenfone 2 Laser Z00T devices. | |
| config DRM_PANEL_BOE_BF060Y8M_AJ0 | |
| tristate "Boe BF060Y8M-AJ0 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Boe BF060Y8M-AJ0 | |
| 5.99" AMOLED modules. The panel has a 1080x2160 resolution and | |
| uses 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host and backlight is controlled through DSI commands. | |
| config DRM_PANEL_BOE_HIMAX8279D | |
| tristate "Boe Himax8279d panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Boe Himax8279d | |
| TFT-LCD modules. The panel has a 1200x1920 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host and has a built-in LED backlight. | |
| config DRM_PANEL_BOE_TV101WUM_NL6 | |
| tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 | |
| 45NA WUXGA PANEL DSI Video Mode panel | |
| config DRM_PANEL_DSI_CM | |
| tristate "Generic DSI command mode panels" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| DRM panel driver for DSI command mode panels with support for | |
| embedded and external backlights. | |
| config DRM_PANEL_LVDS | |
| tristate "Generic LVDS panel driver" | |
| depends on OF | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select VIDEOMODE_HELPERS | |
| help | |
| This driver supports LVDS panels that don't require device-specific | |
| handling of power supplies or control signals. It implements automatic | |
| backlight handling if the panel is attached to a backlight controller. | |
| config DRM_PANEL_SIMPLE | |
| tristate "support for simple panels (other than eDP ones)" | |
| depends on OF | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on PM | |
| select VIDEOMODE_HELPERS | |
| help | |
| DRM panel driver for dumb non-eDP panels that need at most a regulator | |
| and a GPIO to be powered up. Optionally a backlight can be attached so | |
| that it can be automatically turned off when the panel goes into a | |
| low power state. | |
| config DRM_PANEL_EDP | |
| tristate "support for simple Embedded DisplayPort panels" | |
| depends on OF | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on PM | |
| select VIDEOMODE_HELPERS | |
| select DRM_DISPLAY_DP_HELPER | |
| select DRM_DISPLAY_HELPER | |
| select DRM_DP_AUX_BUS | |
| select DRM_KMS_HELPER | |
| help | |
| DRM panel driver for dumb eDP panels that need at most a regulator and | |
| a GPIO to be powered up. Optionally a backlight can be attached so | |
| that it can be automatically turned off when the panel goes into a | |
| low power state. | |
| config DRM_PANEL_EBBG_FT8719 | |
| tristate "EBBG FT8719 panel driver" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the EBBG FT8719 | |
| video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. | |
| The panel has a resolution of 1080x2246. It provides a MIPI DSI | |
| interface to the host. | |
| config DRM_PANEL_ELIDA_KD35T133 | |
| tristate "Elida KD35T133 panel driver" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Elida | |
| KD35T133 controller for 320x480 LCD panels with MIPI-DSI | |
| system interfaces. | |
| config DRM_PANEL_FEIXIN_K101_IM2BA02 | |
| tristate "Feixin K101 IM2BA02 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Feixin K101 IM2BA02 | |
| 4-lane 800x1280 MIPI DSI panel. | |
| config DRM_PANEL_FEIYANG_FY07024DI26A30D | |
| tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y if you want to enable support for panels based on the | |
| Feiyang FY07024DI26A30-D MIPI-DSI interface. | |
| config DRM_PANEL_ILITEK_IL9322 | |
| tristate "Ilitek ILI9322 320x240 QVGA panels" | |
| depends on OF && SPI | |
| select REGMAP | |
| help | |
| Say Y here if you want to enable support for Ilitek IL9322 | |
| QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. | |
| config DRM_PANEL_ILITEK_ILI9341 | |
| tristate "Ilitek ILI9341 240x320 QVGA panels" | |
| depends on OF && SPI | |
| select DRM_KMS_HELPER | |
| select DRM_GEM_DMA_HELPER | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select DRM_MIPI_DBI | |
| help | |
| Say Y here if you want to enable support for Ilitek IL9341 | |
| QVGA (240x320) RGB panels. support serial & parallel rgb | |
| interface. | |
| config DRM_PANEL_ILITEK_ILI9881C | |
| tristate "Ilitek ILI9881C-based panels" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y if you want to enable support for panels based on the | |
| Ilitek ILI9881c controller. | |
| config DRM_PANEL_INNOLUX_EJ030NA | |
| tristate "Innolux EJ030NA 320x480 LCD panel" | |
| depends on OF && SPI | |
| select REGMAP_SPI | |
| help | |
| Say Y here to enable support for the Innolux/Chimei EJ030NA | |
| 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) | |
| and LDK handheld gaming consoles. | |
| config DRM_PANEL_INNOLUX_P079ZCA | |
| tristate "Innolux P079ZCA panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Innolux P079ZCA | |
| TFT-LCD modules. The panel has a 1024x768 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host and has a built-in LED backlight. | |
| config DRM_PANEL_JDI_LT070ME05000 | |
| tristate "JDI LT070ME05000 WUXGA DSI panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for JDI DSI video mode | |
| panel as found in Google Nexus 7 (2013) devices. | |
| The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses | |
| 24 bit per pixel. | |
| config DRM_PANEL_JDI_R63452 | |
| tristate "JDI R63452 Full HD DSI panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the JDI R63452 | |
| DSI command mode panel as found in Xiaomi Mi 5 Devices. | |
| config DRM_PANEL_KHADAS_TS050 | |
| tristate "Khadas TS050 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Khadas TS050 TFT-LCD | |
| panel module. The panel has a 1080x1920 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host, a built-in LED backlight and touch controller. | |
| config DRM_PANEL_KINGDISPLAY_KD097D04 | |
| tristate "Kingdisplay kd097d04 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Kingdisplay kd097d04 | |
| TFT-LCD modules. The panel has a 1536x2048 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host and has a built-in LED backlight. | |
| config DRM_PANEL_LEADTEK_LTK050H3146W | |
| tristate "Leadtek LTK050H3146W panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Leadtek LTK050H3146W | |
| TFT-LCD modules. The panel has a 720x1280 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host and has a built-in LED backlight. | |
| config DRM_PANEL_LEADTEK_LTK500HD1829 | |
| tristate "Leadtek LTK500HD1829 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Kingdisplay kd097d04 | |
| TFT-LCD modules. The panel has a 1536x2048 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host and has a built-in LED backlight. | |
| config DRM_PANEL_SAMSUNG_LD9040 | |
| tristate "Samsung LD9040 RGB/SPI panel" | |
| depends on OF && SPI | |
| select VIDEOMODE_HELPERS | |
| config DRM_PANEL_LG_LB035Q02 | |
| tristate "LG LB035Q024573 RGB panel" | |
| depends on GPIOLIB && OF && SPI | |
| help | |
| Say Y here if you want to enable support for the LB035Q02 RGB panel | |
| (found on the Gumstix Overo Palo35 board). To compile this driver as | |
| a module, choose M here. | |
| config DRM_PANEL_LG_LG4573 | |
| tristate "LG4573 RGB/SPI panel" | |
| depends on OF && SPI | |
| select VIDEOMODE_HELPERS | |
| help | |
| Say Y here if you want to enable support for LG4573 RGB panel. | |
| To compile this driver as a module, choose M here. | |
| config DRM_PANEL_NEC_NL8048HL11 | |
| tristate "NEC NL8048HL11 RGB panel" | |
| depends on GPIOLIB && OF && SPI | |
| help | |
| Say Y here if you want to enable support for the NEC NL8048HL11 RGB | |
| panel (found on the Zoom2/3/3630 SDP boards). To compile this driver | |
| as a module, choose M here. | |
| config DRM_PANEL_NEWVISION_NV3052C | |
| tristate "NewVision NV3052C RGB/SPI panel" | |
| depends on OF && SPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select DRM_MIPI_DBI | |
| help | |
| Say Y here if you want to enable support for the panels built | |
| around the NewVision NV3052C display controller. | |
| config DRM_PANEL_NOVATEK_NT35510 | |
| tristate "Novatek NT35510 RGB panel driver" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the panels built | |
| around the Novatek NT35510 display controller, such as some | |
| Hydis panels. | |
| config DRM_PANEL_NOVATEK_NT35560 | |
| tristate "Novatek NT35560 DSI command mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select VIDEOMODE_HELPERS | |
| help | |
| Say Y here if you want to enable the Novatek NT35560 display | |
| controller. This panel supports DSI in both command and video | |
| mode. This supports several panels such as Sony ACX424AKM and | |
| ACX424AKP. | |
| config DRM_PANEL_NOVATEK_NT35950 | |
| tristate "Novatek NT35950 DSI panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the panels built | |
| around the Novatek NT35950 display controller, such as some | |
| Sharp panels used in Sony Xperia Z5 Premium and XZ Premium | |
| mobile phones. | |
| config DRM_PANEL_NOVATEK_NT36672A | |
| tristate "Novatek NT36672A DSI panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the panels built | |
| around the Novatek NT36672A display controller, such as some | |
| Tianma panels used in a few Xiaomi Poco F1 mobile phones. | |
| config DRM_PANEL_NOVATEK_NT39016 | |
| tristate "Novatek NT39016 RGB/SPI panel" | |
| depends on OF && SPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select REGMAP_SPI | |
| help | |
| Say Y here if you want to enable support for the panels built | |
| around the Novatek NT39016 display controller. | |
| config DRM_PANEL_MANTIX_MLAF057WE51 | |
| tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Mantix | |
| MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It | |
| has a resolution of 720x1440 pixels, a built in backlight and touch | |
| controller. | |
| config DRM_PANEL_OLIMEX_LCD_OLINUXINO | |
| tristate "Olimex LCD-OLinuXino panel" | |
| depends on OF | |
| depends on I2C | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select CRC32 | |
| help | |
| The panel is used with different sizes LCDs, from 480x272 to | |
| 1280x800, and 24 bit per pixel. | |
| Say Y here if you want to enable support for Olimex Ltd. | |
| LCD-OLinuXino panel. | |
| config DRM_PANEL_ORISETECH_OTM8009A | |
| tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Orise Technology | |
| otm8009a 480x800 dsi 2dl panel. | |
| config DRM_PANEL_OSD_OSD101T2587_53TS | |
| tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for One Stop Displays | |
| OSD101T2587-53TS 10.1" 1920x1200 dsi panel. | |
| config DRM_PANEL_PANASONIC_VVX10F034N00 | |
| tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Panasonic VVX10F034N00 | |
| WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some | |
| Xperia Z2 tablets | |
| config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN | |
| tristate "Raspberry Pi 7-inch touchscreen panel" | |
| depends on DRM_MIPI_DSI | |
| help | |
| Say Y here if you want to enable support for the Raspberry | |
| Pi 7" Touchscreen. To compile this driver as a module, | |
| choose M here. | |
| config DRM_PANEL_RAYDIUM_RM67191 | |
| tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Raydium RM67191 FHD | |
| (1080x1920) DSI panel. | |
| config DRM_PANEL_RAYDIUM_RM68200 | |
| tristate "Raydium RM68200 720x1280 DSI video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Raydium RM68200 | |
| 720x1280 DSI video mode panel. | |
| config DRM_PANEL_RONBO_RB070D30 | |
| tristate "Ronbo Electronics RB070D30 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Ronbo Electronics | |
| RB070D30 1024x600 DSI panel. | |
| config DRM_PANEL_SAMSUNG_ATNA33XC20 | |
| tristate "Samsung ATNA33XC20 eDP panel" | |
| depends on OF | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on PM | |
| select DRM_DISPLAY_DP_HELPER | |
| select DRM_DISPLAY_HELPER | |
| select DRM_DP_AUX_BUS | |
| help | |
| DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't | |
| be handled by the DRM_PANEL_SIMPLE driver because its power | |
| sequencing is non-standard. | |
| config DRM_PANEL_SAMSUNG_DB7430 | |
| tristate "Samsung DB7430-based DPI panels" | |
| depends on OF && SPI && GPIOLIB | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select DRM_MIPI_DBI | |
| help | |
| Say Y here if you want to enable support for the Samsung | |
| DB7430 DPI display controller used in such devices as the | |
| LMS397KF04 480x800 DPI panel. | |
| config DRM_PANEL_SAMSUNG_S6D16D0 | |
| tristate "Samsung S6D16D0 DSI video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| select VIDEOMODE_HELPERS | |
| config DRM_PANEL_SAMSUNG_S6D27A1 | |
| tristate "Samsung S6D27A1 DPI panel driver" | |
| depends on OF && SPI && GPIOLIB | |
| select DRM_MIPI_DBI | |
| help | |
| Say Y here if you want to enable support for the Samsung | |
| S6D27A1 DPI 480x800 panel. | |
| This panel can be found in Samsung Galaxy Ace 2 | |
| GT-I8160 mobile phone. | |
| config DRM_PANEL_SAMSUNG_S6E3HA2 | |
| tristate "Samsung S6E3HA2 DSI video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select VIDEOMODE_HELPERS | |
| config DRM_PANEL_SAMSUNG_S6E63J0X03 | |
| tristate "Samsung S6E63J0X03 DSI command mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select VIDEOMODE_HELPERS | |
| config DRM_PANEL_SAMSUNG_S6E63M0 | |
| tristate "Samsung S6E63M0 RGB panel" | |
| depends on OF | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Samsung S6E63M0 | |
| AMOLED LCD panel. This panel can be accessed using SPI or | |
| DSI. | |
| config DRM_PANEL_SAMSUNG_S6E63M0_SPI | |
| tristate "Samsung S6E63M0 RGB SPI interface" | |
| depends on SPI | |
| depends on DRM_PANEL_SAMSUNG_S6E63M0 | |
| default DRM_PANEL_SAMSUNG_S6E63M0 | |
| select DRM_MIPI_DBI | |
| help | |
| Say Y here if you want to be able to access the Samsung | |
| S6E63M0 panel using SPI. | |
| config DRM_PANEL_SAMSUNG_S6E63M0_DSI | |
| tristate "Samsung S6E63M0 RGB DSI interface" | |
| depends on DRM_MIPI_DSI | |
| depends on DRM_PANEL_SAMSUNG_S6E63M0 | |
| help | |
| Say Y here if you want to be able to access the Samsung | |
| S6E63M0 panel using DSI. | |
| config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 | |
| tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" | |
| depends on OF | |
| select DRM_MIPI_DSI | |
| select VIDEOMODE_HELPERS | |
| config DRM_PANEL_SAMSUNG_S6E8AA0 | |
| tristate "Samsung S6E8AA0 DSI video mode panel" | |
| depends on OF | |
| select DRM_MIPI_DSI | |
| select VIDEOMODE_HELPERS | |
| config DRM_PANEL_SAMSUNG_SOFEF00 | |
| tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select VIDEOMODE_HELPERS | |
| help | |
| Say Y or M here if you want to enable support for the Samsung AMOLED | |
| command mode panels found in the OnePlus 6/6T smartphones. | |
| The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively | |
| config DRM_PANEL_SEIKO_43WVF1G | |
| tristate "Seiko 43WVF1G panel" | |
| depends on OF | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select VIDEOMODE_HELPERS | |
| help | |
| Say Y here if you want to enable support for the Seiko | |
| 43WVF1G controller for 800x480 LCD panels | |
| config DRM_PANEL_SHARP_LQ101R1SX01 | |
| tristate "Sharp LQ101R1SX01 panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Sharp LQ101R1SX01 | |
| TFT-LCD modules. The panel has a 2560x1600 resolution and uses | |
| 24 bit RGB per pixel. It provides a dual MIPI DSI interface to | |
| the host and has a built-in LED backlight. | |
| To compile this driver as a module, choose M here: the module | |
| will be called panel-sharp-lq101r1sx01. | |
| config DRM_PANEL_SHARP_LS037V7DW01 | |
| tristate "Sharp LS037V7DW01 VGA LCD panel" | |
| depends on GPIOLIB && OF && REGULATOR | |
| help | |
| Say Y here if you want to enable support for Sharp LS037V7DW01 VGA | |
| (480x640) LCD panel (found on the TI SDP3430 board). | |
| config DRM_PANEL_SHARP_LS043T1LE01 | |
| tristate "Sharp LS043T1LE01 qHD video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Sharp LS043T1LE01 qHD | |
| (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard | |
| config DRM_PANEL_SHARP_LS060T1SX01 | |
| tristate "Sharp LS060T1SX01 FullHD video mode panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" | |
| FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter | |
| Bundle. | |
| config DRM_PANEL_SITRONIX_ST7701 | |
| tristate "Sitronix ST7701 panel driver" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Sitronix | |
| ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI | |
| system interfaces. | |
| config DRM_PANEL_SITRONIX_ST7703 | |
| tristate "Sitronix ST7703 based MIPI touchscreen panels" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for Sitronix ST7703 based | |
| panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in | |
| the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built | |
| in backlight and touch controller. | |
| Touch input support is provided by the goodix driver and needs to be | |
| selected separately. | |
| config DRM_PANEL_SITRONIX_ST7789V | |
| tristate "Sitronix ST7789V panel" | |
| depends on OF && SPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Sitronix | |
| ST7789V controller for 240x320 LCD panels | |
| config DRM_PANEL_SONY_ACX565AKM | |
| tristate "Sony ACX565AKM panel" | |
| depends on GPIOLIB && OF && SPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Sony ACX565AKM | |
| 800x600 3.5" panel (found on the Nokia N900). | |
| config DRM_PANEL_SONY_TULIP_TRULY_NT35521 | |
| tristate "Sony Tulip Truly NT35521 panel" | |
| depends on GPIOLIB && OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Sony Tulip | |
| NT35521 1280x720 video mode panel as found on Sony Xperia M4 | |
| Aqua phone. | |
| config DRM_PANEL_TDO_TL070WSH30 | |
| tristate "TDO TL070WSH30 DSI panel" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD | |
| panel module. The panel has a 1024×600 resolution and uses | |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to | |
| the host, a built-in LED backlight and touch controller. | |
| config DRM_PANEL_TPO_TD028TTEC1 | |
| tristate "Toppoly (TPO) TD028TTEC1 panel driver" | |
| depends on OF && SPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for TPO TD028TTEC1 480x640 | |
| 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). | |
| config DRM_PANEL_TPO_TD043MTEA1 | |
| tristate "Toppoly (TPO) TD043MTEA1 panel driver" | |
| depends on GPIOLIB && OF && REGULATOR && SPI | |
| help | |
| Say Y here if you want to enable support for TPO TD043MTEA1 800x480 | |
| 4.3" panel (found on the OMAP3 Pandora board). | |
| config DRM_PANEL_TPO_TPG110 | |
| tristate "TPO TPG 800x400 panel" | |
| depends on OF && SPI && GPIOLIB | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for TPO TPG110 | |
| 400CH LTPS TFT LCD Single Chip Digital Driver for up to | |
| 800x400 LCD panels. | |
| config DRM_PANEL_TRULY_NT35597_WQXGA | |
| tristate "Truly WQXGA" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| help | |
| Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI | |
| Video Mode panel | |
| config DRM_PANEL_VISIONOX_RM69299 | |
| tristate "Visionox RM69299" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| help | |
| Say Y here if you want to enable support for Visionox | |
| RM69299 DSI Video Mode panel. | |
| config DRM_PANEL_WIDECHIPS_WS2401 | |
| tristate "Widechips WS2401 DPI panel driver" | |
| depends on SPI && GPIOLIB | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select DRM_MIPI_DBI | |
| help | |
| Say Y here if you want to enable support for the Widechips WS2401 DPI | |
| 480x800 display controller used in panels such as Samsung LMS380KF01. | |
| This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). | |
| config DRM_PANEL_XINPENG_XPP055C272 | |
| tristate "Xinpeng XPP055C272 panel driver" | |
| depends on OF | |
| depends on DRM_MIPI_DSI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| help | |
| Say Y here if you want to enable support for the Xinpeng | |
| XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI | |
| system interfaces. | |
| endmenu |