| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019 MediaTek Inc. |
| |
| /* |
| * Bluetooth support for MediaTek SDIO devices |
| * |
| * This file is written based on btsdio.c and btmtkuart.c. |
| * |
| * Author: Sean Wang <sean.wang@mediatek.com> |
| * |
| */ |
| |
| #include <asm/unaligned.h> |
| #include <linux/atomic.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/init.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/skbuff.h> |
| |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/sdio_func.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "h4_recv.h" |
| #include "btmtk.h" |
| |
| #define VERSION "0.1" |
| |
| #define MTKBTSDIO_AUTOSUSPEND_DELAY 1000 |
| |
| static bool enable_autosuspend = true; |
| |
| struct btmtksdio_data { |
| const char *fwname; |
| u16 chipid; |
| bool lp_mbox_supported; |
| }; |
| |
| static const struct btmtksdio_data mt7663_data = { |
| .fwname = FIRMWARE_MT7663, |
| .chipid = 0x7663, |
| .lp_mbox_supported = false, |
| }; |
| |
| static const struct btmtksdio_data mt7668_data = { |
| .fwname = FIRMWARE_MT7668, |
| .chipid = 0x7668, |
| .lp_mbox_supported = false, |
| }; |
| |
| static const struct btmtksdio_data mt7921_data = { |
| .fwname = FIRMWARE_MT7961, |
| .chipid = 0x7921, |
| .lp_mbox_supported = true, |
| }; |
| |
| static const struct sdio_device_id btmtksdio_table[] = { |
| {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7663), |
| .driver_data = (kernel_ulong_t)&mt7663_data }, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7668), |
| .driver_data = (kernel_ulong_t)&mt7668_data }, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7961), |
| .driver_data = (kernel_ulong_t)&mt7921_data }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(sdio, btmtksdio_table); |
| |
| #define MTK_REG_CHLPCR 0x4 /* W1S */ |
| #define C_INT_EN_SET BIT(0) |
| #define C_INT_EN_CLR BIT(1) |
| #define C_FW_OWN_REQ_SET BIT(8) /* For write */ |
| #define C_COM_DRV_OWN BIT(8) /* For read */ |
| #define C_FW_OWN_REQ_CLR BIT(9) |
| |
| #define MTK_REG_CSDIOCSR 0x8 |
| #define SDIO_RE_INIT_EN BIT(0) |
| #define SDIO_INT_CTL BIT(2) |
| |
| #define MTK_REG_CHCR 0xc |
| #define C_INT_CLR_CTRL BIT(1) |
| #define BT_RST_DONE BIT(8) |
| |
| /* CHISR have the same bits field definition with CHIER */ |
| #define MTK_REG_CHISR 0x10 |
| #define MTK_REG_CHIER 0x14 |
| #define FW_OWN_BACK_INT BIT(0) |
| #define RX_DONE_INT BIT(1) |
| #define TX_EMPTY BIT(2) |
| #define TX_FIFO_OVERFLOW BIT(8) |
| #define FW_MAILBOX_INT BIT(15) |
| #define INT_MASK GENMASK(15, 0) |
| #define RX_PKT_LEN GENMASK(31, 16) |
| |
| #define MTK_REG_CSICR 0xc0 |
| #define CSICR_CLR_MBOX_ACK BIT(0) |
| #define MTK_REG_PH2DSM0R 0xc4 |
| #define PH2DSM0R_DRIVER_OWN BIT(0) |
| #define MTK_REG_PD2HRM0R 0xdc |
| #define PD2HRM0R_DRV_OWN BIT(0) |
| |
| #define MTK_REG_CTDR 0x18 |
| |
| #define MTK_REG_CRDR 0x1c |
| |
| #define MTK_REG_CRPLR 0x24 |
| |
| #define MTK_SDIO_BLOCK_SIZE 256 |
| |
| #define BTMTKSDIO_TX_WAIT_VND_EVT 1 |
| #define BTMTKSDIO_HW_TX_READY 2 |
| #define BTMTKSDIO_FUNC_ENABLED 3 |
| #define BTMTKSDIO_PATCH_ENABLED 4 |
| #define BTMTKSDIO_HW_RESET_ACTIVE 5 |
| |
| struct mtkbtsdio_hdr { |
| __le16 len; |
| __le16 reserved; |
| u8 bt_type; |
| } __packed; |
| |
| struct btmtksdio_dev { |
| struct hci_dev *hdev; |
| struct sdio_func *func; |
| struct device *dev; |
| |
| struct work_struct txrx_work; |
| unsigned long tx_state; |
| struct sk_buff_head txq; |
| |
| struct sk_buff *evt_skb; |
| |
| const struct btmtksdio_data *data; |
| |
| struct gpio_desc *reset; |
| }; |
| |
| static int mtk_hci_wmt_sync(struct hci_dev *hdev, |
| struct btmtk_hci_wmt_params *wmt_params) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; |
| struct btmtk_hci_wmt_evt_reg *wmt_evt_reg; |
| u32 hlen, status = BTMTK_WMT_INVALID; |
| struct btmtk_hci_wmt_evt *wmt_evt; |
| struct btmtk_hci_wmt_cmd *wc; |
| struct btmtk_wmt_hdr *hdr; |
| int err; |
| |
| /* Send the WMT command and wait until the WMT event returns */ |
| hlen = sizeof(*hdr) + wmt_params->dlen; |
| if (hlen > 255) |
| return -EINVAL; |
| |
| wc = kzalloc(hlen, GFP_KERNEL); |
| if (!wc) |
| return -ENOMEM; |
| |
| hdr = &wc->hdr; |
| hdr->dir = 1; |
| hdr->op = wmt_params->op; |
| hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); |
| hdr->flag = wmt_params->flag; |
| memcpy(wc->data, wmt_params->data, wmt_params->dlen); |
| |
| set_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); |
| |
| err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc); |
| if (err < 0) { |
| clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); |
| goto err_free_wc; |
| } |
| |
| /* The vendor specific WMT commands are all answered by a vendor |
| * specific event and will not have the Command Status or Command |
| * Complete as with usual HCI command flow control. |
| * |
| * After sending the command, wait for BTMTKSDIO_TX_WAIT_VND_EVT |
| * state to be cleared. The driver specific event receive routine |
| * will clear that state and with that indicate completion of the |
| * WMT command. |
| */ |
| err = wait_on_bit_timeout(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT, |
| TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); |
| if (err == -EINTR) { |
| bt_dev_err(hdev, "Execution of wmt command interrupted"); |
| clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); |
| goto err_free_wc; |
| } |
| |
| if (err) { |
| bt_dev_err(hdev, "Execution of wmt command timed out"); |
| clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); |
| err = -ETIMEDOUT; |
| goto err_free_wc; |
| } |
| |
| /* Parse and handle the return WMT event */ |
| wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data; |
| if (wmt_evt->whdr.op != hdr->op) { |
| bt_dev_err(hdev, "Wrong op received %d expected %d", |
| wmt_evt->whdr.op, hdr->op); |
| err = -EIO; |
| goto err_free_skb; |
| } |
| |
| switch (wmt_evt->whdr.op) { |
| case BTMTK_WMT_SEMAPHORE: |
| if (wmt_evt->whdr.flag == 2) |
| status = BTMTK_WMT_PATCH_UNDONE; |
| else |
| status = BTMTK_WMT_PATCH_DONE; |
| break; |
| case BTMTK_WMT_FUNC_CTRL: |
| wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; |
| if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) |
| status = BTMTK_WMT_ON_DONE; |
| else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) |
| status = BTMTK_WMT_ON_PROGRESS; |
| else |
| status = BTMTK_WMT_ON_UNDONE; |
| break; |
| case BTMTK_WMT_PATCH_DWNLD: |
| if (wmt_evt->whdr.flag == 2) |
| status = BTMTK_WMT_PATCH_DONE; |
| else if (wmt_evt->whdr.flag == 1) |
| status = BTMTK_WMT_PATCH_PROGRESS; |
| else |
| status = BTMTK_WMT_PATCH_UNDONE; |
| break; |
| case BTMTK_WMT_REGISTER: |
| wmt_evt_reg = (struct btmtk_hci_wmt_evt_reg *)wmt_evt; |
| if (le16_to_cpu(wmt_evt->whdr.dlen) == 12) |
| status = le32_to_cpu(wmt_evt_reg->val); |
| break; |
| } |
| |
| if (wmt_params->status) |
| *wmt_params->status = status; |
| |
| err_free_skb: |
| kfree_skb(bdev->evt_skb); |
| bdev->evt_skb = NULL; |
| err_free_wc: |
| kfree(wc); |
| |
| return err; |
| } |
| |
| static int btmtksdio_tx_packet(struct btmtksdio_dev *bdev, |
| struct sk_buff *skb) |
| { |
| struct mtkbtsdio_hdr *sdio_hdr; |
| int err; |
| |
| /* Make sure that there are enough rooms for SDIO header */ |
| if (unlikely(skb_headroom(skb) < sizeof(*sdio_hdr))) { |
| err = pskb_expand_head(skb, sizeof(*sdio_hdr), 0, |
| GFP_ATOMIC); |
| if (err < 0) |
| return err; |
| } |
| |
| /* Prepend MediaTek SDIO Specific Header */ |
| skb_push(skb, sizeof(*sdio_hdr)); |
| |
| sdio_hdr = (void *)skb->data; |
| sdio_hdr->len = cpu_to_le16(skb->len); |
| sdio_hdr->reserved = cpu_to_le16(0); |
| sdio_hdr->bt_type = hci_skb_pkt_type(skb); |
| |
| clear_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state); |
| err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, |
| round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); |
| if (err < 0) |
| goto err_skb_pull; |
| |
| bdev->hdev->stat.byte_tx += skb->len; |
| |
| kfree_skb(skb); |
| |
| return 0; |
| |
| err_skb_pull: |
| skb_pull(skb, sizeof(*sdio_hdr)); |
| |
| return err; |
| } |
| |
| static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev) |
| { |
| return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL); |
| } |
| |
| static u32 btmtksdio_drv_own_query_79xx(struct btmtksdio_dev *bdev) |
| { |
| return sdio_readl(bdev->func, MTK_REG_PD2HRM0R, NULL); |
| } |
| |
| static u32 btmtksdio_chcr_query(struct btmtksdio_dev *bdev) |
| { |
| return sdio_readl(bdev->func, MTK_REG_CHCR, NULL); |
| } |
| |
| static int btmtksdio_fw_pmctrl(struct btmtksdio_dev *bdev) |
| { |
| u32 status; |
| int err; |
| |
| sdio_claim_host(bdev->func); |
| |
| if (bdev->data->lp_mbox_supported && |
| test_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state)) { |
| sdio_writel(bdev->func, CSICR_CLR_MBOX_ACK, MTK_REG_CSICR, |
| &err); |
| err = readx_poll_timeout(btmtksdio_drv_own_query_79xx, bdev, |
| status, !(status & PD2HRM0R_DRV_OWN), |
| 2000, 1000000); |
| if (err < 0) { |
| bt_dev_err(bdev->hdev, "mailbox ACK not cleared"); |
| goto out; |
| } |
| } |
| |
| /* Return ownership to the device */ |
| sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, &err); |
| if (err < 0) |
| goto out; |
| |
| err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status, |
| !(status & C_COM_DRV_OWN), 2000, 1000000); |
| |
| out: |
| sdio_release_host(bdev->func); |
| |
| if (err < 0) |
| bt_dev_err(bdev->hdev, "Cannot return ownership to device"); |
| |
| return err; |
| } |
| |
| static int btmtksdio_drv_pmctrl(struct btmtksdio_dev *bdev) |
| { |
| u32 status; |
| int err; |
| |
| sdio_claim_host(bdev->func); |
| |
| /* Get ownership from the device */ |
| sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err); |
| if (err < 0) |
| goto out; |
| |
| err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status, |
| status & C_COM_DRV_OWN, 2000, 1000000); |
| |
| if (!err && bdev->data->lp_mbox_supported && |
| test_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state)) |
| err = readx_poll_timeout(btmtksdio_drv_own_query_79xx, bdev, |
| status, status & PD2HRM0R_DRV_OWN, |
| 2000, 1000000); |
| |
| out: |
| sdio_release_host(bdev->func); |
| |
| if (err < 0) |
| bt_dev_err(bdev->hdev, "Cannot get ownership from device"); |
| |
| return err; |
| } |
| |
| static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| struct hci_event_hdr *hdr = (void *)skb->data; |
| u8 evt = hdr->evt; |
| int err; |
| |
| /* When someone waits for the WMT event, the skb is being cloned |
| * and being processed the events from there then. |
| */ |
| if (test_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) { |
| bdev->evt_skb = skb_clone(skb, GFP_KERNEL); |
| if (!bdev->evt_skb) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| } |
| |
| err = hci_recv_frame(hdev, skb); |
| if (err < 0) |
| goto err_free_skb; |
| |
| if (evt == HCI_EV_WMT) { |
| if (test_and_clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, |
| &bdev->tx_state)) { |
| /* Barrier to sync with other CPUs */ |
| smp_mb__after_atomic(); |
| wake_up_bit(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT); |
| } |
| } |
| |
| return 0; |
| |
| err_free_skb: |
| kfree_skb(bdev->evt_skb); |
| bdev->evt_skb = NULL; |
| |
| err_out: |
| return err; |
| } |
| |
| static int btmtksdio_recv_acl(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle); |
| |
| switch (handle) { |
| case 0xfc6f: |
| /* Firmware dump from device: when the firmware hangs, the |
| * device can no longer suspend and thus disable auto-suspend. |
| */ |
| pm_runtime_forbid(bdev->dev); |
| fallthrough; |
| case 0x05ff: |
| case 0x05fe: |
| /* Firmware debug logging */ |
| return hci_recv_diag(hdev, skb); |
| } |
| |
| return hci_recv_frame(hdev, skb); |
| } |
| |
| static const struct h4_recv_pkt mtk_recv_pkts[] = { |
| { H4_RECV_ACL, .recv = btmtksdio_recv_acl }, |
| { H4_RECV_SCO, .recv = hci_recv_frame }, |
| { H4_RECV_EVENT, .recv = btmtksdio_recv_event }, |
| }; |
| |
| static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size) |
| { |
| const struct h4_recv_pkt *pkts = mtk_recv_pkts; |
| int pkts_count = ARRAY_SIZE(mtk_recv_pkts); |
| struct mtkbtsdio_hdr *sdio_hdr; |
| int err, i, pad_size; |
| struct sk_buff *skb; |
| u16 dlen; |
| |
| if (rx_size < sizeof(*sdio_hdr)) |
| return -EILSEQ; |
| |
| /* A SDIO packet is exactly containing a Bluetooth packet */ |
| skb = bt_skb_alloc(rx_size, GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| |
| skb_put(skb, rx_size); |
| |
| err = sdio_readsb(bdev->func, skb->data, MTK_REG_CRDR, rx_size); |
| if (err < 0) |
| goto err_kfree_skb; |
| |
| sdio_hdr = (void *)skb->data; |
| |
| /* We assume the default error as -EILSEQ simply to make the error path |
| * be cleaner. |
| */ |
| err = -EILSEQ; |
| |
| if (rx_size != le16_to_cpu(sdio_hdr->len)) { |
| bt_dev_err(bdev->hdev, "Rx size in sdio header is mismatched "); |
| goto err_kfree_skb; |
| } |
| |
| hci_skb_pkt_type(skb) = sdio_hdr->bt_type; |
| |
| /* Remove MediaTek SDIO header */ |
| skb_pull(skb, sizeof(*sdio_hdr)); |
| |
| /* We have to dig into the packet to get payload size and then know how |
| * many padding bytes at the tail, these padding bytes should be removed |
| * before the packet is indicated to the core layer. |
| */ |
| for (i = 0; i < pkts_count; i++) { |
| if (sdio_hdr->bt_type == (&pkts[i])->type) |
| break; |
| } |
| |
| if (i >= pkts_count) { |
| bt_dev_err(bdev->hdev, "Invalid bt type 0x%02x", |
| sdio_hdr->bt_type); |
| goto err_kfree_skb; |
| } |
| |
| /* Remaining bytes cannot hold a header*/ |
| if (skb->len < (&pkts[i])->hlen) { |
| bt_dev_err(bdev->hdev, "The size of bt header is mismatched"); |
| goto err_kfree_skb; |
| } |
| |
| switch ((&pkts[i])->lsize) { |
| case 1: |
| dlen = skb->data[(&pkts[i])->loff]; |
| break; |
| case 2: |
| dlen = get_unaligned_le16(skb->data + |
| (&pkts[i])->loff); |
| break; |
| default: |
| goto err_kfree_skb; |
| } |
| |
| pad_size = skb->len - (&pkts[i])->hlen - dlen; |
| |
| /* Remaining bytes cannot hold a payload */ |
| if (pad_size < 0) { |
| bt_dev_err(bdev->hdev, "The size of bt payload is mismatched"); |
| goto err_kfree_skb; |
| } |
| |
| /* Remove padding bytes */ |
| skb_trim(skb, skb->len - pad_size); |
| |
| /* Complete frame */ |
| (&pkts[i])->recv(bdev->hdev, skb); |
| |
| bdev->hdev->stat.byte_rx += rx_size; |
| |
| return 0; |
| |
| err_kfree_skb: |
| kfree_skb(skb); |
| |
| return err; |
| } |
| |
| static void btmtksdio_txrx_work(struct work_struct *work) |
| { |
| struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev, |
| txrx_work); |
| unsigned long txrx_timeout; |
| u32 int_status, rx_size; |
| struct sk_buff *skb; |
| int err; |
| |
| pm_runtime_get_sync(bdev->dev); |
| |
| sdio_claim_host(bdev->func); |
| |
| /* Disable interrupt */ |
| sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0); |
| |
| txrx_timeout = jiffies + 5 * HZ; |
| |
| do { |
| int_status = sdio_readl(bdev->func, MTK_REG_CHISR, NULL); |
| |
| /* Ack an interrupt as soon as possible before any operation on |
| * hardware. |
| * |
| * Note that we don't ack any status during operations to avoid race |
| * condition between the host and the device such as it's possible to |
| * mistakenly ack RX_DONE for the next packet and then cause interrupts |
| * not be raised again but there is still pending data in the hardware |
| * FIFO. |
| */ |
| sdio_writel(bdev->func, int_status, MTK_REG_CHISR, NULL); |
| int_status &= INT_MASK; |
| |
| if ((int_status & FW_MAILBOX_INT) && |
| bdev->data->chipid == 0x7921) { |
| sdio_writel(bdev->func, PH2DSM0R_DRIVER_OWN, |
| MTK_REG_PH2DSM0R, 0); |
| } |
| |
| if (int_status & FW_OWN_BACK_INT) |
| bt_dev_dbg(bdev->hdev, "Get fw own back"); |
| |
| if (int_status & TX_EMPTY) |
| set_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state); |
| |
| else if (unlikely(int_status & TX_FIFO_OVERFLOW)) |
| bt_dev_warn(bdev->hdev, "Tx fifo overflow"); |
| |
| if (test_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state)) { |
| skb = skb_dequeue(&bdev->txq); |
| if (skb) { |
| err = btmtksdio_tx_packet(bdev, skb); |
| if (err < 0) { |
| bdev->hdev->stat.err_tx++; |
| skb_queue_head(&bdev->txq, skb); |
| } |
| } |
| } |
| |
| if (int_status & RX_DONE_INT) { |
| rx_size = sdio_readl(bdev->func, MTK_REG_CRPLR, NULL); |
| rx_size = (rx_size & RX_PKT_LEN) >> 16; |
| if (btmtksdio_rx_packet(bdev, rx_size) < 0) |
| bdev->hdev->stat.err_rx++; |
| } |
| } while (int_status || time_is_before_jiffies(txrx_timeout)); |
| |
| /* Enable interrupt */ |
| sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, 0); |
| |
| sdio_release_host(bdev->func); |
| |
| pm_runtime_mark_last_busy(bdev->dev); |
| pm_runtime_put_autosuspend(bdev->dev); |
| } |
| |
| static void btmtksdio_interrupt(struct sdio_func *func) |
| { |
| struct btmtksdio_dev *bdev = sdio_get_drvdata(func); |
| |
| /* Disable interrupt */ |
| sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0); |
| |
| schedule_work(&bdev->txrx_work); |
| } |
| |
| static int btmtksdio_open(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| u32 val; |
| int err; |
| |
| sdio_claim_host(bdev->func); |
| |
| err = sdio_enable_func(bdev->func); |
| if (err < 0) |
| goto err_release_host; |
| |
| set_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state); |
| |
| err = btmtksdio_drv_pmctrl(bdev); |
| if (err < 0) |
| goto err_disable_func; |
| |
| /* Disable interrupt & mask out all interrupt sources */ |
| sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, &err); |
| if (err < 0) |
| goto err_disable_func; |
| |
| sdio_writel(bdev->func, 0, MTK_REG_CHIER, &err); |
| if (err < 0) |
| goto err_disable_func; |
| |
| err = sdio_claim_irq(bdev->func, btmtksdio_interrupt); |
| if (err < 0) |
| goto err_disable_func; |
| |
| err = sdio_set_block_size(bdev->func, MTK_SDIO_BLOCK_SIZE); |
| if (err < 0) |
| goto err_release_irq; |
| |
| /* SDIO CMD 5 allows the SDIO device back to idle state an |
| * synchronous interrupt is supported in SDIO 4-bit mode |
| */ |
| val = sdio_readl(bdev->func, MTK_REG_CSDIOCSR, &err); |
| if (err < 0) |
| goto err_release_irq; |
| |
| val |= SDIO_INT_CTL; |
| sdio_writel(bdev->func, val, MTK_REG_CSDIOCSR, &err); |
| if (err < 0) |
| goto err_release_irq; |
| |
| /* Explitly set write-1-clear method */ |
| val = sdio_readl(bdev->func, MTK_REG_CHCR, &err); |
| if (err < 0) |
| goto err_release_irq; |
| |
| val |= C_INT_CLR_CTRL; |
| sdio_writel(bdev->func, val, MTK_REG_CHCR, &err); |
| if (err < 0) |
| goto err_release_irq; |
| |
| /* Setup interrupt sources */ |
| sdio_writel(bdev->func, RX_DONE_INT | TX_EMPTY | TX_FIFO_OVERFLOW, |
| MTK_REG_CHIER, &err); |
| if (err < 0) |
| goto err_release_irq; |
| |
| /* Enable interrupt */ |
| sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, &err); |
| if (err < 0) |
| goto err_release_irq; |
| |
| sdio_release_host(bdev->func); |
| |
| return 0; |
| |
| err_release_irq: |
| sdio_release_irq(bdev->func); |
| |
| err_disable_func: |
| sdio_disable_func(bdev->func); |
| |
| err_release_host: |
| sdio_release_host(bdev->func); |
| |
| return err; |
| } |
| |
| static int btmtksdio_close(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| |
| sdio_claim_host(bdev->func); |
| |
| /* Disable interrupt */ |
| sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL); |
| |
| sdio_release_irq(bdev->func); |
| |
| cancel_work_sync(&bdev->txrx_work); |
| |
| btmtksdio_fw_pmctrl(bdev); |
| |
| clear_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state); |
| sdio_disable_func(bdev->func); |
| |
| sdio_release_host(bdev->func); |
| |
| return 0; |
| } |
| |
| static int btmtksdio_flush(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| |
| skb_queue_purge(&bdev->txq); |
| |
| cancel_work_sync(&bdev->txrx_work); |
| |
| return 0; |
| } |
| |
| static int btmtksdio_func_query(struct hci_dev *hdev) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| int status, err; |
| u8 param = 0; |
| |
| /* Query whether the function is enabled */ |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 4; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = &status; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to query function status (%d)", err); |
| return err; |
| } |
| |
| return status; |
| } |
| |
| static int mt76xx_setup(struct hci_dev *hdev, const char *fwname) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| struct btmtk_hci_wmt_params wmt_params; |
| struct btmtk_tci_sleep tci_sleep; |
| struct sk_buff *skb; |
| int err, status; |
| u8 param = 0x1; |
| |
| /* Query whether the firmware is already download */ |
| wmt_params.op = BTMTK_WMT_SEMAPHORE; |
| wmt_params.flag = 1; |
| wmt_params.dlen = 0; |
| wmt_params.data = NULL; |
| wmt_params.status = &status; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to query firmware status (%d)", err); |
| return err; |
| } |
| |
| if (status == BTMTK_WMT_PATCH_DONE) { |
| bt_dev_info(hdev, "Firmware already downloaded"); |
| goto ignore_setup_fw; |
| } |
| |
| /* Setup a firmware which the device definitely requires */ |
| err = btmtk_setup_firmware(hdev, fwname, mtk_hci_wmt_sync); |
| if (err < 0) |
| return err; |
| |
| ignore_setup_fw: |
| /* Query whether the device is already enabled */ |
| err = readx_poll_timeout(btmtksdio_func_query, hdev, status, |
| status < 0 || status != BTMTK_WMT_ON_PROGRESS, |
| 2000, 5000000); |
| /* -ETIMEDOUT happens */ |
| if (err < 0) |
| return err; |
| |
| /* The other errors happen in btusb_mtk_func_query */ |
| if (status < 0) |
| return status; |
| |
| if (status == BTMTK_WMT_ON_DONE) { |
| bt_dev_info(hdev, "function already on"); |
| goto ignore_func_on; |
| } |
| |
| /* Enable Bluetooth protocol */ |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 0; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); |
| return err; |
| } |
| |
| set_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state); |
| |
| ignore_func_on: |
| /* Apply the low power environment setup */ |
| tci_sleep.mode = 0x5; |
| tci_sleep.duration = cpu_to_le16(0x640); |
| tci_sleep.host_duration = cpu_to_le16(0x640); |
| tci_sleep.host_wakeup_pin = 0; |
| tci_sleep.time_compensation = 0; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static int mt79xx_setup(struct hci_dev *hdev, const char *fwname) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| struct btmtk_hci_wmt_params wmt_params; |
| u8 param = 0x1; |
| int err; |
| |
| err = btmtk_setup_firmware_79xx(hdev, fwname, mtk_hci_wmt_sync); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to setup 79xx firmware (%d)", err); |
| return err; |
| } |
| |
| err = btmtksdio_fw_pmctrl(bdev); |
| if (err < 0) |
| return err; |
| |
| err = btmtksdio_drv_pmctrl(bdev); |
| if (err < 0) |
| return err; |
| |
| /* Enable Bluetooth protocol */ |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 0; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); |
| return err; |
| } |
| |
| hci_set_msft_opcode(hdev, 0xFD30); |
| hci_set_aosp_capable(hdev); |
| set_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state); |
| |
| return err; |
| } |
| |
| static int btmtksdio_mtk_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| struct reg_read_cmd reg_read = { |
| .type = 1, |
| .num = 1, |
| }; |
| u32 status; |
| int err; |
| |
| reg_read.addr = cpu_to_le32(reg); |
| wmt_params.op = BTMTK_WMT_REGISTER; |
| wmt_params.flag = BTMTK_WMT_REG_READ; |
| wmt_params.dlen = sizeof(reg_read); |
| wmt_params.data = ®_read; |
| wmt_params.status = &status; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to read reg (%d)", err); |
| return err; |
| } |
| |
| *val = status; |
| |
| return err; |
| } |
| |
| static int btmtksdio_mtk_reg_write(struct hci_dev *hdev, u32 reg, u32 val, u32 mask) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| const struct reg_write_cmd reg_write = { |
| .type = 1, |
| .num = 1, |
| .addr = cpu_to_le32(reg), |
| .data = cpu_to_le32(val), |
| .mask = cpu_to_le32(mask), |
| }; |
| int err, status; |
| |
| wmt_params.op = BTMTK_WMT_REGISTER; |
| wmt_params.flag = BTMTK_WMT_REG_WRITE; |
| wmt_params.dlen = sizeof(reg_write); |
| wmt_params.data = ®_write; |
| wmt_params.status = &status; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) |
| bt_dev_err(hdev, "Failed to write reg (%d)", err); |
| |
| return err; |
| } |
| |
| static int btmtksdio_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id) |
| { |
| /* uses 1 as data path id for all the usecases */ |
| *data_path_id = 1; |
| return 0; |
| } |
| |
| static int btmtksdio_get_codec_config_data(struct hci_dev *hdev, |
| __u8 link, struct bt_codec *codec, |
| __u8 *ven_len, __u8 **ven_data) |
| { |
| int err = 0; |
| |
| if (!ven_data || !ven_len) |
| return -EINVAL; |
| |
| *ven_len = 0; |
| *ven_data = NULL; |
| |
| if (link != ESCO_LINK) { |
| bt_dev_err(hdev, "Invalid link type(%u)", link); |
| return -EINVAL; |
| } |
| |
| *ven_data = kmalloc(sizeof(__u8), GFP_KERNEL); |
| if (!*ven_data) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| /* supports only CVSD and mSBC offload codecs */ |
| switch (codec->id) { |
| case 0x02: |
| **ven_data = 0x00; |
| break; |
| case 0x05: |
| **ven_data = 0x01; |
| break; |
| default: |
| err = -EINVAL; |
| bt_dev_err(hdev, "Invalid codec id(%u)", codec->id); |
| goto error; |
| } |
| /* codec and its capabilities are pre-defined to ids |
| * preset id = 0x00 represents CVSD codec with sampling rate 8K |
| * preset id = 0x01 represents mSBC codec with sampling rate 16K |
| */ |
| *ven_len = sizeof(__u8); |
| return err; |
| |
| error: |
| kfree(*ven_data); |
| *ven_data = NULL; |
| return err; |
| } |
| |
| static int btmtksdio_sco_setting(struct hci_dev *hdev) |
| { |
| const struct btmtk_sco sco_setting = { |
| .clock_config = 0x49, |
| .channel_format_config = 0x80, |
| }; |
| struct sk_buff *skb; |
| u32 val; |
| int err; |
| |
| /* Enable SCO over I2S/PCM for MediaTek chipset */ |
| skb = __hci_cmd_sync(hdev, 0xfc72, sizeof(sco_setting), |
| &sco_setting, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| |
| err = btmtksdio_mtk_reg_read(hdev, MT7921_PINMUX_0, &val); |
| if (err < 0) |
| return err; |
| |
| val |= 0x11000000; |
| err = btmtksdio_mtk_reg_write(hdev, MT7921_PINMUX_0, val, ~0); |
| if (err < 0) |
| return err; |
| |
| err = btmtksdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val); |
| if (err < 0) |
| return err; |
| |
| val |= 0x00000101; |
| err = btmtksdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0); |
| if (err < 0) |
| return err; |
| |
| hdev->get_data_path_id = btmtksdio_get_data_path_id; |
| hdev->get_codec_config_data = btmtksdio_get_codec_config_data; |
| |
| return err; |
| } |
| |
| static int btmtksdio_reset_setting(struct hci_dev *hdev) |
| { |
| int err; |
| u32 val; |
| |
| err = btmtksdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val); |
| if (err < 0) |
| return err; |
| |
| val |= 0x20; /* set the pin (bit field 11:8) work as GPIO mode */ |
| err = btmtksdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0); |
| if (err < 0) |
| return err; |
| |
| err = btmtksdio_mtk_reg_read(hdev, MT7921_BTSYS_RST, &val); |
| if (err < 0) |
| return err; |
| |
| val |= MT7921_BTSYS_RST_WITH_GPIO; |
| return btmtksdio_mtk_reg_write(hdev, MT7921_BTSYS_RST, val, ~0); |
| } |
| |
| static int btmtksdio_setup(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| ktime_t calltime, delta, rettime; |
| unsigned long long duration; |
| char fwname[64]; |
| int err, dev_id; |
| u32 fw_version = 0, val; |
| |
| calltime = ktime_get(); |
| set_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state); |
| |
| switch (bdev->data->chipid) { |
| case 0x7921: |
| if (test_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state)) { |
| err = btmtksdio_mtk_reg_read(hdev, MT7921_DLSTATUS, |
| &val); |
| if (err < 0) |
| return err; |
| |
| val &= ~BT_DL_STATE; |
| err = btmtksdio_mtk_reg_write(hdev, MT7921_DLSTATUS, |
| val, ~0); |
| if (err < 0) |
| return err; |
| |
| btmtksdio_fw_pmctrl(bdev); |
| msleep(20); |
| btmtksdio_drv_pmctrl(bdev); |
| |
| clear_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state); |
| } |
| |
| err = btmtksdio_mtk_reg_read(hdev, 0x70010200, &dev_id); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to get device id (%d)", err); |
| return err; |
| } |
| |
| err = btmtksdio_mtk_reg_read(hdev, 0x80021004, &fw_version); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to get fw version (%d)", err); |
| return err; |
| } |
| |
| snprintf(fwname, sizeof(fwname), |
| "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin", |
| dev_id & 0xffff, (fw_version & 0xff) + 1); |
| err = mt79xx_setup(hdev, fwname); |
| if (err < 0) |
| return err; |
| |
| /* Enable SCO over I2S/PCM */ |
| err = btmtksdio_sco_setting(hdev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to enable SCO setting (%d)", err); |
| return err; |
| } |
| |
| /* Enable WBS with mSBC codec */ |
| set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); |
| |
| /* Enable GPIO reset mechanism */ |
| if (bdev->reset) { |
| err = btmtksdio_reset_setting(hdev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to enable Reset setting (%d)", err); |
| devm_gpiod_put(bdev->dev, bdev->reset); |
| bdev->reset = NULL; |
| } |
| } |
| |
| /* Valid LE States quirk for MediaTek 7921 */ |
| set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); |
| |
| break; |
| case 0x7663: |
| case 0x7668: |
| err = mt76xx_setup(hdev, bdev->data->fwname); |
| if (err < 0) |
| return err; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| rettime = ktime_get(); |
| delta = ktime_sub(rettime, calltime); |
| duration = (unsigned long long)ktime_to_ns(delta) >> 10; |
| |
| pm_runtime_set_autosuspend_delay(bdev->dev, |
| MTKBTSDIO_AUTOSUSPEND_DELAY); |
| pm_runtime_use_autosuspend(bdev->dev); |
| |
| err = pm_runtime_set_active(bdev->dev); |
| if (err < 0) |
| return err; |
| |
| /* Default forbid runtime auto suspend, that can be allowed by |
| * enable_autosuspend flag or the PM runtime entry under sysfs. |
| */ |
| pm_runtime_forbid(bdev->dev); |
| pm_runtime_enable(bdev->dev); |
| |
| if (enable_autosuspend) |
| pm_runtime_allow(bdev->dev); |
| |
| bt_dev_info(hdev, "Device setup in %llu usecs", duration); |
| |
| return 0; |
| } |
| |
| static int btmtksdio_shutdown(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| struct btmtk_hci_wmt_params wmt_params; |
| u8 param = 0x0; |
| int err; |
| |
| /* Get back the state to be consistent with the state |
| * in btmtksdio_setup. |
| */ |
| pm_runtime_get_sync(bdev->dev); |
| |
| /* wmt command only works until the reset is complete */ |
| if (test_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state)) |
| goto ignore_wmt_cmd; |
| |
| /* Disable the device */ |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 0; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = mtk_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); |
| return err; |
| } |
| |
| ignore_wmt_cmd: |
| pm_runtime_put_noidle(bdev->dev); |
| pm_runtime_disable(bdev->dev); |
| |
| return 0; |
| } |
| |
| static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| |
| switch (hci_skb_pkt_type(skb)) { |
| case HCI_COMMAND_PKT: |
| hdev->stat.cmd_tx++; |
| break; |
| |
| case HCI_ACLDATA_PKT: |
| hdev->stat.acl_tx++; |
| break; |
| |
| case HCI_SCODATA_PKT: |
| hdev->stat.sco_tx++; |
| break; |
| |
| default: |
| return -EILSEQ; |
| } |
| |
| skb_queue_tail(&bdev->txq, skb); |
| |
| schedule_work(&bdev->txrx_work); |
| |
| return 0; |
| } |
| |
| static void btmtksdio_cmd_timeout(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| u32 status; |
| int err; |
| |
| if (!bdev->reset || bdev->data->chipid != 0x7921) |
| return; |
| |
| pm_runtime_get_sync(bdev->dev); |
| |
| if (test_and_set_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state)) |
| return; |
| |
| sdio_claim_host(bdev->func); |
| |
| sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL); |
| skb_queue_purge(&bdev->txq); |
| cancel_work_sync(&bdev->txrx_work); |
| |
| gpiod_set_value_cansleep(bdev->reset, 1); |
| msleep(100); |
| gpiod_set_value_cansleep(bdev->reset, 0); |
| |
| err = readx_poll_timeout(btmtksdio_chcr_query, bdev, status, |
| status & BT_RST_DONE, 100000, 2000000); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to reset (%d)", err); |
| goto err; |
| } |
| |
| clear_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state); |
| err: |
| sdio_release_host(bdev->func); |
| |
| pm_runtime_put_noidle(bdev->dev); |
| pm_runtime_disable(bdev->dev); |
| |
| hci_reset_dev(hdev); |
| } |
| |
| static bool btmtksdio_sdio_inband_wakeup(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| |
| return device_may_wakeup(bdev->dev); |
| } |
| |
| static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev) |
| { |
| struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); |
| bool may_wakeup = device_may_wakeup(bdev->dev); |
| const struct btmtk_wakeon bt_awake = { |
| .mode = 0x1, |
| .gpo = 0, |
| .active_high = 0x1, |
| .enable_delay = cpu_to_le16(0xc80), |
| .wakeup_delay = cpu_to_le16(0x20), |
| }; |
| |
| if (may_wakeup && bdev->data->chipid == 0x7921) { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc27, sizeof(bt_awake), |
| &bt_awake, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) |
| may_wakeup = false; |
| else |
| kfree_skb(skb); |
| } |
| |
| return may_wakeup; |
| } |
| |
| static int btmtksdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct btmtksdio_dev *bdev; |
| struct hci_dev *hdev; |
| int err; |
| |
| bdev = devm_kzalloc(&func->dev, sizeof(*bdev), GFP_KERNEL); |
| if (!bdev) |
| return -ENOMEM; |
| |
| bdev->data = (void *)id->driver_data; |
| if (!bdev->data) |
| return -ENODEV; |
| |
| bdev->dev = &func->dev; |
| bdev->func = func; |
| |
| INIT_WORK(&bdev->txrx_work, btmtksdio_txrx_work); |
| skb_queue_head_init(&bdev->txq); |
| |
| /* Initialize and register HCI device */ |
| hdev = hci_alloc_dev(); |
| if (!hdev) { |
| dev_err(&func->dev, "Can't allocate HCI device\n"); |
| return -ENOMEM; |
| } |
| |
| bdev->hdev = hdev; |
| |
| hdev->bus = HCI_SDIO; |
| hci_set_drvdata(hdev, bdev); |
| |
| hdev->open = btmtksdio_open; |
| hdev->close = btmtksdio_close; |
| hdev->cmd_timeout = btmtksdio_cmd_timeout; |
| hdev->flush = btmtksdio_flush; |
| hdev->setup = btmtksdio_setup; |
| hdev->shutdown = btmtksdio_shutdown; |
| hdev->send = btmtksdio_send_frame; |
| hdev->wakeup = btmtksdio_sdio_wakeup; |
| /* |
| * If SDIO controller supports wake on Bluetooth, sending a wakeon |
| * command is not necessary. |
| */ |
| if (device_can_wakeup(func->card->host->parent)) |
| hdev->wakeup = btmtksdio_sdio_inband_wakeup; |
| else |
| hdev->wakeup = btmtksdio_sdio_wakeup; |
| hdev->set_bdaddr = btmtk_set_bdaddr; |
| |
| SET_HCIDEV_DEV(hdev, &func->dev); |
| |
| hdev->manufacturer = 70; |
| set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); |
| |
| sdio_set_drvdata(func, bdev); |
| |
| err = hci_register_dev(hdev); |
| if (err < 0) { |
| dev_err(&func->dev, "Can't register HCI device\n"); |
| hci_free_dev(hdev); |
| return err; |
| } |
| |
| /* pm_runtime_enable would be done after the firmware is being |
| * downloaded because the core layer probably already enables |
| * runtime PM for this func such as the case host->caps & |
| * MMC_CAP_POWER_OFF_CARD. |
| */ |
| if (pm_runtime_enabled(bdev->dev)) |
| pm_runtime_disable(bdev->dev); |
| |
| /* As explaination in drivers/mmc/core/sdio_bus.c tells us: |
| * Unbound SDIO functions are always suspended. |
| * During probe, the function is set active and the usage count |
| * is incremented. If the driver supports runtime PM, |
| * it should call pm_runtime_put_noidle() in its probe routine and |
| * pm_runtime_get_noresume() in its remove routine. |
| * |
| * So, put a pm_runtime_put_noidle here ! |
| */ |
| pm_runtime_put_noidle(bdev->dev); |
| |
| err = device_init_wakeup(bdev->dev, true); |
| if (err) |
| bt_dev_err(hdev, "failed to initialize device wakeup"); |
| |
| bdev->dev->of_node = of_find_compatible_node(NULL, NULL, |
| "mediatek,mt7921s-bluetooth"); |
| bdev->reset = devm_gpiod_get_optional(bdev->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(bdev->reset)) |
| err = PTR_ERR(bdev->reset); |
| |
| return err; |
| } |
| |
| static void btmtksdio_remove(struct sdio_func *func) |
| { |
| struct btmtksdio_dev *bdev = sdio_get_drvdata(func); |
| struct hci_dev *hdev; |
| |
| if (!bdev) |
| return; |
| |
| /* Be consistent the state in btmtksdio_probe */ |
| pm_runtime_get_noresume(bdev->dev); |
| |
| hdev = bdev->hdev; |
| |
| sdio_set_drvdata(func, NULL); |
| hci_unregister_dev(hdev); |
| hci_free_dev(hdev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int btmtksdio_runtime_suspend(struct device *dev) |
| { |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct btmtksdio_dev *bdev; |
| int err; |
| |
| bdev = sdio_get_drvdata(func); |
| if (!bdev) |
| return 0; |
| |
| if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state)) |
| return 0; |
| |
| sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| |
| err = btmtksdio_fw_pmctrl(bdev); |
| |
| bt_dev_dbg(bdev->hdev, "status (%d) return ownership to device", err); |
| |
| return err; |
| } |
| |
| static int btmtksdio_runtime_resume(struct device *dev) |
| { |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct btmtksdio_dev *bdev; |
| int err; |
| |
| bdev = sdio_get_drvdata(func); |
| if (!bdev) |
| return 0; |
| |
| if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state)) |
| return 0; |
| |
| err = btmtksdio_drv_pmctrl(bdev); |
| |
| bt_dev_dbg(bdev->hdev, "status (%d) get ownership from device", err); |
| |
| return err; |
| } |
| |
| static UNIVERSAL_DEV_PM_OPS(btmtksdio_pm_ops, btmtksdio_runtime_suspend, |
| btmtksdio_runtime_resume, NULL); |
| #define BTMTKSDIO_PM_OPS (&btmtksdio_pm_ops) |
| #else /* CONFIG_PM */ |
| #define BTMTKSDIO_PM_OPS NULL |
| #endif /* CONFIG_PM */ |
| |
| static struct sdio_driver btmtksdio_driver = { |
| .name = "btmtksdio", |
| .probe = btmtksdio_probe, |
| .remove = btmtksdio_remove, |
| .id_table = btmtksdio_table, |
| .drv = { |
| .owner = THIS_MODULE, |
| .pm = BTMTKSDIO_PM_OPS, |
| } |
| }; |
| |
| module_sdio_driver(btmtksdio_driver); |
| |
| module_param(enable_autosuspend, bool, 0644); |
| MODULE_PARM_DESC(enable_autosuspend, "Enable autosuspend by default"); |
| |
| MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); |
| MODULE_DESCRIPTION("MediaTek Bluetooth SDIO driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |