| /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
| /* | |
| * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> | |
| * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> | |
| */ | |
| #ifndef __AR7_H__ | |
| #define __AR7_H__ | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/errno.h> | |
| #include <asm/addrspace.h> | |
| #define AR7_SDRAM_BASE 0x14000000 | |
| #define AR7_REGS_BASE 0x08610000 | |
| #define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) | |
| #define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) | |
| /* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ | |
| #define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) | |
| #define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) | |
| #define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) | |
| #define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) | |
| #define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) | |
| #define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) | |
| #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) | |
| #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) | |
| #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) | |
| #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) | |
| #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) | |
| #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) | |
| #define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) | |
| #define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) | |
| #define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) | |
| #define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) | |
| /* Titan registers */ | |
| #define TITAN_REGS_ESWITCH_BASE (0x08640000) | |
| #define TITAN_REGS_MAC0 (TITAN_REGS_ESWITCH_BASE) | |
| #define TITAN_REGS_MAC1 (TITAN_REGS_ESWITCH_BASE + 0x0800) | |
| #define TITAN_REGS_MDIO (TITAN_REGS_ESWITCH_BASE + 0x02000) | |
| #define TITAN_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1c00) | |
| #define TITAN_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1300) | |
| #define AR7_RESET_PERIPHERAL 0x0 | |
| #define AR7_RESET_SOFTWARE 0x4 | |
| #define AR7_RESET_STATUS 0x8 | |
| #define AR7_RESET_BIT_CPMAC_LO 17 | |
| #define AR7_RESET_BIT_CPMAC_HI 21 | |
| #define AR7_RESET_BIT_MDIO 22 | |
| #define AR7_RESET_BIT_EPHY 26 | |
| #define TITAN_RESET_BIT_EPHY1 28 | |
| /* GPIO control registers */ | |
| #define AR7_GPIO_INPUT 0x0 | |
| #define AR7_GPIO_OUTPUT 0x4 | |
| #define AR7_GPIO_DIR 0x8 | |
| #define AR7_GPIO_ENABLE 0xc | |
| #define TITAN_GPIO_INPUT_0 0x0 | |
| #define TITAN_GPIO_INPUT_1 0x4 | |
| #define TITAN_GPIO_OUTPUT_0 0x8 | |
| #define TITAN_GPIO_OUTPUT_1 0xc | |
| #define TITAN_GPIO_DIR_0 0x10 | |
| #define TITAN_GPIO_DIR_1 0x14 | |
| #define TITAN_GPIO_ENBL_0 0x18 | |
| #define TITAN_GPIO_ENBL_1 0x1c | |
| #define AR7_CHIP_7100 0x18 | |
| #define AR7_CHIP_7200 0x2b | |
| #define AR7_CHIP_7300 0x05 | |
| #define AR7_CHIP_TITAN 0x07 | |
| #define TITAN_CHIP_1050 0x0f | |
| #define TITAN_CHIP_1055 0x0e | |
| #define TITAN_CHIP_1056 0x0d | |
| #define TITAN_CHIP_1060 0x07 | |
| /* Interrupts */ | |
| #define AR7_IRQ_UART0 15 | |
| #define AR7_IRQ_UART1 16 | |
| /* Clocks */ | |
| #define AR7_AFE_CLOCK 35328000 | |
| #define AR7_REF_CLOCK 25000000 | |
| #define AR7_XTAL_CLOCK 24000000 | |
| /* DCL */ | |
| #define AR7_WDT_HW_ENA 0x10 | |
| struct plat_cpmac_data { | |
| int reset_bit; | |
| int power_bit; | |
| u32 phy_mask; | |
| char dev_addr[6]; | |
| }; | |
| struct plat_dsl_data { | |
| int reset_bit_dsl; | |
| int reset_bit_sar; | |
| }; | |
| extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; | |
| static inline int ar7_is_titan(void) | |
| { | |
| return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == | |
| AR7_CHIP_TITAN; | |
| } | |
| static inline u16 ar7_chip_id(void) | |
| { | |
| return ar7_is_titan() ? AR7_CHIP_TITAN : (readl((void *) | |
| KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff); | |
| } | |
| static inline u16 titan_chip_id(void) | |
| { | |
| unsigned int val = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + | |
| TITAN_GPIO_INPUT_1)); | |
| return ((val >> 12) & 0x0f); | |
| } | |
| static inline u8 ar7_chip_rev(void) | |
| { | |
| return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + (ar7_is_titan() ? 0x24 : | |
| 0x14))) >> 16) & 0xff; | |
| } | |
| static inline int ar7_has_high_cpmac(void) | |
| { | |
| u16 chip_id = ar7_chip_id(); | |
| switch (chip_id) { | |
| case AR7_CHIP_7100: | |
| case AR7_CHIP_7200: | |
| return 0; | |
| case AR7_CHIP_7300: | |
| return 1; | |
| default: | |
| return -ENXIO; | |
| } | |
| } | |
| #define ar7_has_high_vlynq ar7_has_high_cpmac | |
| #define ar7_has_second_uart ar7_has_high_cpmac | |
| static inline void ar7_device_enable(u32 bit) | |
| { | |
| void *reset_reg = | |
| (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); | |
| writel(readl(reset_reg) | (1 << bit), reset_reg); | |
| msleep(20); | |
| } | |
| static inline void ar7_device_disable(u32 bit) | |
| { | |
| void *reset_reg = | |
| (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); | |
| writel(readl(reset_reg) & ~(1 << bit), reset_reg); | |
| msleep(20); | |
| } | |
| static inline void ar7_device_reset(u32 bit) | |
| { | |
| ar7_device_disable(bit); | |
| ar7_device_enable(bit); | |
| } | |
| static inline void ar7_device_on(u32 bit) | |
| { | |
| void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); | |
| writel(readl(power_reg) | (1 << bit), power_reg); | |
| msleep(20); | |
| } | |
| static inline void ar7_device_off(u32 bit) | |
| { | |
| void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); | |
| writel(readl(power_reg) & ~(1 << bit), power_reg); | |
| msleep(20); | |
| } | |
| int __init ar7_gpio_init(void); | |
| void __init ar7_init_clocks(void); | |
| /* Board specific GPIO functions */ | |
| int ar7_gpio_enable(unsigned gpio); | |
| int ar7_gpio_disable(unsigned gpio); | |
| #endif /* __AR7_H__ */ |