| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* Copyright(c) 2020 Intel Corporation. */ | |
| /* Copyright(c) 2026 Advanced Micro Devices, Inc. */ | |
| #ifndef __CXL_CXL_H__ | |
| #define __CXL_CXL_H__ | |
| #include <linux/node.h> | |
| #include <linux/ioport.h> | |
| #include <cxl/mailbox.h> | |
| /** | |
| * enum cxl_devtype - delineate type-2 from a generic type-3 device | |
| * @CXL_DEVTYPE_DEVMEM: Vendor specific CXL Type-2 device implementing HDM-D or | |
| * HDM-DB, no requirement that this device implements a | |
| * mailbox, or other memory-device-standard manageability | |
| * flows. | |
| * @CXL_DEVTYPE_CLASSMEM: Common class definition of a CXL Type-3 device with | |
| * HDM-H and class-mandatory memory device registers | |
| */ | |
| enum cxl_devtype { | |
| CXL_DEVTYPE_DEVMEM, | |
| CXL_DEVTYPE_CLASSMEM, | |
| }; | |
| struct device; | |
| /* | |
| * Using struct_group() allows for per register-block-type helper routines, | |
| * without requiring block-type agnostic code to include the prefix. | |
| */ | |
| struct cxl_regs { | |
| /* | |
| * Common set of CXL Component register block base pointers | |
| * @hdm_decoder: CXL 2.0 8.2.5.12 CXL HDM Decoder Capability Structure | |
| * @ras: CXL 2.0 8.2.5.9 CXL RAS Capability Structure | |
| */ | |
| struct_group_tagged(cxl_component_regs, component, | |
| void __iomem *hdm_decoder; | |
| void __iomem *ras; | |
| ); | |
| /* | |
| * Common set of CXL Device register block base pointers | |
| * @status: CXL 2.0 8.2.8.3 Device Status Registers | |
| * @mbox: CXL 2.0 8.2.8.4 Mailbox Registers | |
| * @memdev: CXL 2.0 8.2.8.5 Memory Device Registers | |
| */ | |
| struct_group_tagged(cxl_device_regs, device_regs, | |
| void __iomem *status, *mbox, *memdev; | |
| ); | |
| struct_group_tagged(cxl_pmu_regs, pmu_regs, | |
| void __iomem *pmu; | |
| ); | |
| /* | |
| * RCH downstream port specific RAS register | |
| * @aer: CXL 3.0 8.2.1.1 RCH Downstream Port RCRB | |
| */ | |
| struct_group_tagged(cxl_rch_regs, rch_regs, | |
| void __iomem *dport_aer; | |
| ); | |
| /* | |
| * RCD upstream port specific PCIe cap register | |
| * @pcie_cap: CXL 3.0 8.2.1.2 RCD Upstream Port RCRB | |
| */ | |
| struct_group_tagged(cxl_rcd_regs, rcd_regs, | |
| void __iomem *rcd_pcie_cap; | |
| ); | |
| }; | |
| struct cxl_reg_map { | |
| bool valid; | |
| int id; | |
| unsigned long offset; | |
| unsigned long size; | |
| }; | |
| struct cxl_component_reg_map { | |
| struct cxl_reg_map hdm_decoder; | |
| struct cxl_reg_map ras; | |
| }; | |
| struct cxl_device_reg_map { | |
| struct cxl_reg_map status; | |
| struct cxl_reg_map mbox; | |
| struct cxl_reg_map memdev; | |
| }; | |
| struct cxl_pmu_reg_map { | |
| struct cxl_reg_map pmu; | |
| }; | |
| /** | |
| * struct cxl_register_map - DVSEC harvested register block mapping parameters | |
| * @host: device for devm operations and logging | |
| * @base: virtual base of the register-block-BAR + @block_offset | |
| * @resource: physical resource base of the register block | |
| * @max_size: maximum mapping size to perform register search | |
| * @reg_type: see enum cxl_regloc_type | |
| * @component_map: cxl_reg_map for component registers | |
| * @device_map: cxl_reg_maps for device registers | |
| * @pmu_map: cxl_reg_maps for CXL Performance Monitoring Units | |
| */ | |
| struct cxl_register_map { | |
| struct device *host; | |
| void __iomem *base; | |
| resource_size_t resource; | |
| resource_size_t max_size; | |
| u8 reg_type; | |
| union { | |
| struct cxl_component_reg_map component_map; | |
| struct cxl_device_reg_map device_map; | |
| struct cxl_pmu_reg_map pmu_map; | |
| }; | |
| }; | |
| /** | |
| * struct cxl_dpa_perf - DPA performance property entry | |
| * @dpa_range: range for DPA address | |
| * @coord: QoS performance data (i.e. latency, bandwidth) | |
| * @cdat_coord: raw QoS performance data from CDAT | |
| * @qos_class: QoS Class cookies | |
| */ | |
| struct cxl_dpa_perf { | |
| struct range dpa_range; | |
| struct access_coordinate coord[ACCESS_COORDINATE_MAX]; | |
| struct access_coordinate cdat_coord[ACCESS_COORDINATE_MAX]; | |
| int qos_class; | |
| }; | |
| enum cxl_partition_mode { | |
| CXL_PARTMODE_RAM, | |
| CXL_PARTMODE_PMEM, | |
| }; | |
| /** | |
| * struct cxl_dpa_partition - DPA partition descriptor | |
| * @res: shortcut to the partition in the DPA resource tree (cxlds->dpa_res) | |
| * @perf: performance attributes of the partition from CDAT | |
| * @mode: operation mode for the DPA capacity, e.g. ram, pmem, dynamic... | |
| */ | |
| struct cxl_dpa_partition { | |
| struct resource res; | |
| struct cxl_dpa_perf perf; | |
| enum cxl_partition_mode mode; | |
| }; | |
| #define CXL_NR_PARTITIONS_MAX 2 | |
| /** | |
| * struct cxl_dev_state - The driver device state | |
| * | |
| * cxl_dev_state represents the CXL driver/device state. It provides an | |
| * interface to mailbox commands as well as some cached data about the device. | |
| * Currently only memory devices are represented. | |
| * | |
| * @dev: The device associated with this CXL state | |
| * @cxlmd: The device representing the CXL.mem capabilities of @dev | |
| * @reg_map: component and ras register mapping parameters | |
| * @regs: Parsed register blocks | |
| * @cxl_dvsec: Offset to the PCIe device DVSEC | |
| * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH) | |
| * @media_ready: Indicate whether the device media is usable | |
| * @dpa_res: Overall DPA resource tree for the device | |
| * @part: DPA partition array | |
| * @nr_partitions: Number of DPA partitions | |
| * @serial: PCIe Device Serial Number | |
| * @type: Generic Memory Class device or Vendor Specific Memory device | |
| * @cxl_mbox: CXL mailbox context | |
| * @cxlfs: CXL features context | |
| */ | |
| struct cxl_dev_state { | |
| /* public for Type2 drivers */ | |
| struct device *dev; | |
| struct cxl_memdev *cxlmd; | |
| /* private for Type2 drivers */ | |
| struct cxl_register_map reg_map; | |
| struct cxl_device_regs regs; | |
| int cxl_dvsec; | |
| bool rcd; | |
| bool media_ready; | |
| struct resource dpa_res; | |
| struct cxl_dpa_partition part[CXL_NR_PARTITIONS_MAX]; | |
| unsigned int nr_partitions; | |
| u64 serial; | |
| enum cxl_devtype type; | |
| struct cxl_mailbox cxl_mbox; | |
| #ifdef CONFIG_CXL_FEATURES | |
| struct cxl_features_state *cxlfs; | |
| #endif | |
| }; | |
| struct cxl_dev_state *_devm_cxl_dev_state_create(struct device *dev, | |
| enum cxl_devtype type, | |
| u64 serial, u16 dvsec, | |
| size_t size, bool has_mbox); | |
| /** | |
| * cxl_dev_state_create - safely create and cast a cxl dev state embedded in a | |
| * driver specific struct. | |
| * | |
| * @parent: device behind the request | |
| * @type: CXL device type | |
| * @serial: device identification | |
| * @dvsec: dvsec capability offset | |
| * @drv_struct: driver struct embedding a cxl_dev_state struct | |
| * @member: name of the struct cxl_dev_state member in drv_struct | |
| * @mbox: true if mailbox supported | |
| * | |
| * Returns a pointer to the drv_struct allocated and embedding a cxl_dev_state | |
| * struct initialized. | |
| * | |
| * Introduced for Type2 driver support. | |
| */ | |
| #define devm_cxl_dev_state_create(parent, type, serial, dvsec, drv_struct, member, mbox) \ | |
| ({ \ | |
| static_assert(__same_type(struct cxl_dev_state, \ | |
| ((drv_struct *)NULL)->member)); \ | |
| static_assert(offsetof(drv_struct, member) == 0); \ | |
| (drv_struct *)_devm_cxl_dev_state_create(parent, type, serial, dvsec, \ | |
| sizeof(drv_struct), mbox); \ | |
| }) | |
| struct cxl_memdev *devm_cxl_probe_mem(struct cxl_dev_state *cxlds, | |
| struct range *range); | |
| #endif /* __CXL_CXL_H__ */ |