| /* Copyright (c) 2009 - 2016 Freescale Semiconductor, Inc. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * * Neither the name of Freescale Semiconductor nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation, either version 2 of that License or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY | |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include "bman_priv.h" | |
| u16 bman_ip_rev; | |
| EXPORT_SYMBOL(bman_ip_rev); | |
| /* Register offsets */ | |
| #define REG_FBPR_FPC 0x0800 | |
| #define REG_ECSR 0x0a00 | |
| #define REG_ECIR 0x0a04 | |
| #define REG_EADR 0x0a08 | |
| #define REG_EDATA(n) (0x0a10 + ((n) * 0x04)) | |
| #define REG_SBEC(n) (0x0a80 + ((n) * 0x04)) | |
| #define REG_IP_REV_1 0x0bf8 | |
| #define REG_IP_REV_2 0x0bfc | |
| #define REG_FBPR_BARE 0x0c00 | |
| #define REG_FBPR_BAR 0x0c04 | |
| #define REG_FBPR_AR 0x0c10 | |
| #define REG_SRCIDR 0x0d04 | |
| #define REG_LIODNR 0x0d08 | |
| #define REG_ERR_ISR 0x0e00 | |
| #define REG_ERR_IER 0x0e04 | |
| #define REG_ERR_ISDR 0x0e08 | |
| /* Used by all error interrupt registers except 'inhibit' */ | |
| #define BM_EIRQ_IVCI 0x00000010 /* Invalid Command Verb */ | |
| #define BM_EIRQ_FLWI 0x00000008 /* FBPR Low Watermark */ | |
| #define BM_EIRQ_MBEI 0x00000004 /* Multi-bit ECC Error */ | |
| #define BM_EIRQ_SBEI 0x00000002 /* Single-bit ECC Error */ | |
| #define BM_EIRQ_BSCN 0x00000001 /* pool State Change Notification */ | |
| struct bman_hwerr_txt { | |
| u32 mask; | |
| const char *txt; | |
| }; | |
| static const struct bman_hwerr_txt bman_hwerr_txts[] = { | |
| { BM_EIRQ_IVCI, "Invalid Command Verb" }, | |
| { BM_EIRQ_FLWI, "FBPR Low Watermark" }, | |
| { BM_EIRQ_MBEI, "Multi-bit ECC Error" }, | |
| { BM_EIRQ_SBEI, "Single-bit ECC Error" }, | |
| { BM_EIRQ_BSCN, "Pool State Change Notification" }, | |
| }; | |
| /* Only trigger low water mark interrupt once only */ | |
| #define BMAN_ERRS_TO_DISABLE BM_EIRQ_FLWI | |
| /* Pointer to the start of the BMan's CCSR space */ | |
| static u32 __iomem *bm_ccsr_start; | |
| static inline u32 bm_ccsr_in(u32 offset) | |
| { | |
| return ioread32be(bm_ccsr_start + offset/4); | |
| } | |
| static inline void bm_ccsr_out(u32 offset, u32 val) | |
| { | |
| iowrite32be(val, bm_ccsr_start + offset/4); | |
| } | |
| static void bm_get_version(u16 *id, u8 *major, u8 *minor) | |
| { | |
| u32 v = bm_ccsr_in(REG_IP_REV_1); | |
| *id = (v >> 16); | |
| *major = (v >> 8) & 0xff; | |
| *minor = v & 0xff; | |
| } | |
| /* signal transactions for FBPRs with higher priority */ | |
| #define FBPR_AR_RPRIO_HI BIT(30) | |
| /* Track if probe has occurred and if cleanup is required */ | |
| static int __bman_probed; | |
| static int __bman_requires_cleanup; | |
| static int bm_set_memory(u64 ba, u32 size) | |
| { | |
| u32 bar, bare; | |
| u32 exp = ilog2(size); | |
| /* choke if size isn't within range */ | |
| DPAA_ASSERT(size >= 4096 && size <= 1024*1024*1024 && | |
| is_power_of_2(size)); | |
| /* choke if '[e]ba' has lower-alignment than 'size' */ | |
| DPAA_ASSERT(!(ba & (size - 1))); | |
| /* Check to see if BMan has already been initialized */ | |
| bar = bm_ccsr_in(REG_FBPR_BAR); | |
| if (bar) { | |
| /* Maker sure ba == what was programmed) */ | |
| bare = bm_ccsr_in(REG_FBPR_BARE); | |
| if (bare != upper_32_bits(ba) || bar != lower_32_bits(ba)) { | |
| pr_err("Attempted to reinitialize BMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n", | |
| ba, bare, bar); | |
| return -ENOMEM; | |
| } | |
| pr_info("BMan BAR already configured\n"); | |
| __bman_requires_cleanup = 1; | |
| return 1; | |
| } | |
| bm_ccsr_out(REG_FBPR_BARE, upper_32_bits(ba)); | |
| bm_ccsr_out(REG_FBPR_BAR, lower_32_bits(ba)); | |
| bm_ccsr_out(REG_FBPR_AR, exp - 1); | |
| return 0; | |
| } | |
| /* | |
| * Location and size of BMan private memory | |
| * | |
| * Ideally we would use the DMA API to turn rmem->base into a DMA address | |
| * (especially if iommu translations ever get involved). Unfortunately, the | |
| * DMA API currently does not allow mapping anything that is not backed with | |
| * a struct page. | |
| */ | |
| static dma_addr_t fbpr_a; | |
| static size_t fbpr_sz; | |
| static irqreturn_t bman_isr(int irq, void *ptr) | |
| { | |
| u32 isr_val, ier_val, ecsr_val, isr_mask, i; | |
| struct device *dev = ptr; | |
| ier_val = bm_ccsr_in(REG_ERR_IER); | |
| isr_val = bm_ccsr_in(REG_ERR_ISR); | |
| ecsr_val = bm_ccsr_in(REG_ECSR); | |
| isr_mask = isr_val & ier_val; | |
| if (!isr_mask) | |
| return IRQ_NONE; | |
| for (i = 0; i < ARRAY_SIZE(bman_hwerr_txts); i++) { | |
| if (bman_hwerr_txts[i].mask & isr_mask) { | |
| dev_err_ratelimited(dev, "ErrInt: %s\n", | |
| bman_hwerr_txts[i].txt); | |
| if (bman_hwerr_txts[i].mask & ecsr_val) { | |
| /* Re-arm error capture registers */ | |
| bm_ccsr_out(REG_ECSR, ecsr_val); | |
| } | |
| if (bman_hwerr_txts[i].mask & BMAN_ERRS_TO_DISABLE) { | |
| dev_dbg(dev, "Disabling error 0x%x\n", | |
| bman_hwerr_txts[i].mask); | |
| ier_val &= ~bman_hwerr_txts[i].mask; | |
| bm_ccsr_out(REG_ERR_IER, ier_val); | |
| } | |
| } | |
| } | |
| bm_ccsr_out(REG_ERR_ISR, isr_val); | |
| return IRQ_HANDLED; | |
| } | |
| int bman_is_probed(void) | |
| { | |
| return __bman_probed; | |
| } | |
| EXPORT_SYMBOL_GPL(bman_is_probed); | |
| int bman_requires_cleanup(void) | |
| { | |
| return __bman_requires_cleanup; | |
| } | |
| void bman_done_cleanup(void) | |
| { | |
| __bman_requires_cleanup = 0; | |
| } | |
| static int fsl_bman_probe(struct platform_device *pdev) | |
| { | |
| int ret, err_irq; | |
| struct device *dev = &pdev->dev; | |
| struct device_node *node = dev->of_node; | |
| struct resource *res; | |
| u16 id, bm_pool_cnt; | |
| u8 major, minor; | |
| __bman_probed = -1; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n", | |
| node); | |
| return -ENXIO; | |
| } | |
| bm_ccsr_start = devm_ioremap(dev, res->start, resource_size(res)); | |
| if (!bm_ccsr_start) | |
| return -ENXIO; | |
| bm_get_version(&id, &major, &minor); | |
| if (major == 1 && minor == 0) { | |
| bman_ip_rev = BMAN_REV10; | |
| bm_pool_cnt = BM_POOL_MAX; | |
| } else if (major == 2 && minor == 0) { | |
| bman_ip_rev = BMAN_REV20; | |
| bm_pool_cnt = 8; | |
| } else if (major == 2 && minor == 1) { | |
| bman_ip_rev = BMAN_REV21; | |
| bm_pool_cnt = BM_POOL_MAX; | |
| } else { | |
| dev_err(dev, "Unknown Bman version:%04x,%02x,%02x\n", | |
| id, major, minor); | |
| return -ENODEV; | |
| } | |
| ret = qbman_init_private_mem(dev, 0, "fsl,bman-fbpr", &fbpr_a, &fbpr_sz); | |
| if (ret) { | |
| dev_err(dev, "qbman_init_private_mem() failed 0x%x\n", | |
| ret); | |
| return -ENODEV; | |
| } | |
| dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz); | |
| bm_set_memory(fbpr_a, fbpr_sz); | |
| err_irq = platform_get_irq(pdev, 0); | |
| if (err_irq <= 0) { | |
| dev_info(dev, "Can't get %pOF IRQ\n", node); | |
| return -ENODEV; | |
| } | |
| ret = devm_request_irq(dev, err_irq, bman_isr, IRQF_SHARED, "bman-err", | |
| dev); | |
| if (ret) { | |
| dev_err(dev, "devm_request_irq() failed %d for '%pOF'\n", | |
| ret, node); | |
| return ret; | |
| } | |
| /* Disable Buffer Pool State Change */ | |
| bm_ccsr_out(REG_ERR_ISDR, BM_EIRQ_BSCN); | |
| /* | |
| * Write-to-clear any stale bits, (eg. starvation being asserted prior | |
| * to resource allocation during driver init). | |
| */ | |
| bm_ccsr_out(REG_ERR_ISR, 0xffffffff); | |
| /* Enable Error Interrupts */ | |
| bm_ccsr_out(REG_ERR_IER, 0xffffffff); | |
| bm_bpalloc = devm_gen_pool_create(dev, 0, -1, "bman-bpalloc"); | |
| if (IS_ERR(bm_bpalloc)) { | |
| ret = PTR_ERR(bm_bpalloc); | |
| dev_err(dev, "bman-bpalloc pool init failed (%d)\n", ret); | |
| return ret; | |
| } | |
| /* seed BMan resource pool */ | |
| ret = gen_pool_add(bm_bpalloc, DPAA_GENALLOC_OFF, bm_pool_cnt, -1); | |
| if (ret) { | |
| dev_err(dev, "Failed to seed BPID range [%d..%d] (%d)\n", | |
| 0, bm_pool_cnt - 1, ret); | |
| return ret; | |
| } | |
| __bman_probed = 1; | |
| return 0; | |
| }; | |
| static const struct of_device_id fsl_bman_ids[] = { | |
| { | |
| .compatible = "fsl,bman", | |
| }, | |
| {} | |
| }; | |
| static struct platform_driver fsl_bman_driver = { | |
| .driver = { | |
| .name = KBUILD_MODNAME, | |
| .of_match_table = fsl_bman_ids, | |
| .suppress_bind_attrs = true, | |
| }, | |
| .probe = fsl_bman_probe, | |
| }; | |
| builtin_platform_driver(fsl_bman_driver); |