| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * This file is part of wl18xx | |
| * | |
| * Copyright (C) 2011 Texas Instruments Inc. | |
| */ | |
| #include "../wlcore/wlcore.h" | |
| #include "../wlcore/cmd.h" | |
| #include "../wlcore/debug.h" | |
| #include "../wlcore/acx.h" | |
| #include "../wlcore/tx.h" | |
| #include "wl18xx.h" | |
| #include "tx.h" | |
| static | |
| void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif, | |
| u8 band, struct ieee80211_tx_rate *rate, u8 hlid) | |
| { | |
| u8 fw_rate = wl->links[hlid].fw_rate_idx; | |
| if (fw_rate > CONF_HW_RATE_INDEX_MAX) { | |
| wl1271_error("last Tx rate invalid: %d", fw_rate); | |
| rate->idx = 0; | |
| rate->flags = 0; | |
| return; | |
| } | |
| if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) { | |
| rate->idx = fw_rate; | |
| if (band == NL80211_BAND_5GHZ) | |
| rate->idx -= CONF_HW_RATE_INDEX_6MBPS; | |
| rate->flags = 0; | |
| } else { | |
| rate->flags = IEEE80211_TX_RC_MCS; | |
| rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0; | |
| /* SGI modifier is counted as a separate rate */ | |
| if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI) | |
| (rate->idx)--; | |
| if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) | |
| (rate->idx)--; | |
| /* this also covers the 40Mhz SGI case (= MCS15) */ | |
| if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI || | |
| fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) | |
| rate->flags |= IEEE80211_TX_RC_SHORT_GI; | |
| if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) { | |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); | |
| if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || | |
| wlvif->channel_type == NL80211_CHAN_HT40PLUS) { | |
| /* adjustment needed for range 0-7 */ | |
| rate->idx -= 8; | |
| rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | |
| } | |
| } | |
| } | |
| } | |
| static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) | |
| { | |
| struct ieee80211_tx_info *info; | |
| struct sk_buff *skb; | |
| int id = tx_stat_byte & WL18XX_TX_STATUS_DESC_ID_MASK; | |
| bool tx_success; | |
| struct wl1271_tx_hw_descr *tx_desc; | |
| /* check for id legality */ | |
| if (unlikely(id >= wl->num_tx_desc || wl->tx_frames[id] == NULL)) { | |
| wl1271_warning("illegal id in tx completion: %d", id); | |
| return; | |
| } | |
| /* a zero bit indicates Tx success */ | |
| tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX)); | |
| skb = wl->tx_frames[id]; | |
| info = IEEE80211_SKB_CB(skb); | |
| tx_desc = (struct wl1271_tx_hw_descr *)skb->data; | |
| if (wl12xx_is_dummy_packet(wl, skb)) { | |
| wl1271_free_tx_id(wl, id); | |
| return; | |
| } | |
| /* update the TX status info */ | |
| if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) | |
| info->flags |= IEEE80211_TX_STAT_ACK; | |
| /* | |
| * first pass info->control.vif while it's valid, and then fill out | |
| * the info->status structures | |
| */ | |
| wl18xx_get_last_tx_rate(wl, info->control.vif, | |
| info->band, | |
| &info->status.rates[0], | |
| tx_desc->hlid); | |
| info->status.rates[0].count = 1; /* no data about retries */ | |
| info->status.ack_signal = -1; | |
| if (!tx_success) | |
| wl->stats.retry_count++; | |
| /* | |
| * TODO: update sequence number for encryption? seems to be | |
| * unsupported for now. needed for recovery with encryption. | |
| */ | |
| /* remove private header from packet */ | |
| skb_pull(skb, sizeof(struct wl1271_tx_hw_descr)); | |
| /* remove TKIP header space if present */ | |
| if ((wl->quirks & WLCORE_QUIRK_TKIP_HEADER_SPACE) && | |
| info->control.hw_key && | |
| info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { | |
| int hdrlen = ieee80211_get_hdrlen_from_skb(skb); | |
| memmove(skb->data + WL1271_EXTRA_SPACE_TKIP, skb->data, hdrlen); | |
| skb_pull(skb, WL1271_EXTRA_SPACE_TKIP); | |
| } | |
| wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p success %d", | |
| id, skb, tx_success); | |
| /* return the packet to the stack */ | |
| skb_queue_tail(&wl->deferred_tx_queue, skb); | |
| queue_work(wl->freezable_wq, &wl->netstack_work); | |
| wl1271_free_tx_id(wl, id); | |
| } | |
| static u8 wl18xx_next_tx_idx(u8 idx) | |
| { | |
| if (++idx >= WL18XX_FW_MAX_TX_STATUS_DESC) | |
| idx = 0; | |
| return idx; | |
| } | |
| void wl18xx_tx_immediate_complete(struct wl1271 *wl) | |
| { | |
| struct wl18xx_fw_status_priv *status_priv = | |
| (struct wl18xx_fw_status_priv *)wl->fw_status->priv; | |
| struct wl18xx_priv *priv = wl->priv; | |
| u8 i, hlid; | |
| /* nothing to do here */ | |
| if (priv->last_fw_rls_idx == status_priv->fw_release_idx) | |
| return; | |
| /* update rates per link */ | |
| hlid = wl->fw_status->counters.hlid; | |
| if (hlid < WLCORE_MAX_LINKS) { | |
| wl->links[hlid].fw_rate_idx = | |
| wl->fw_status->counters.tx_last_rate; | |
| wl->links[hlid].fw_rate_mbps = | |
| wl->fw_status->counters.tx_last_rate_mbps; | |
| } | |
| /* freed Tx descriptors */ | |
| wl1271_debug(DEBUG_TX, "last released desc = %d, current idx = %d", | |
| priv->last_fw_rls_idx, status_priv->fw_release_idx); | |
| if (status_priv->fw_release_idx >= WL18XX_FW_MAX_TX_STATUS_DESC) { | |
| wl1271_error("invalid desc release index %d", | |
| status_priv->fw_release_idx); | |
| WARN_ON(1); | |
| return; | |
| } | |
| for (i = priv->last_fw_rls_idx; i != status_priv->fw_release_idx; | |
| i = wl18xx_next_tx_idx(i)) { | |
| wl18xx_tx_complete_packet(wl, | |
| status_priv->released_tx_desc[i]); | |
| wl->tx_results_count++; | |
| } | |
| priv->last_fw_rls_idx = status_priv->fw_release_idx; | |
| } |