| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * This file is part of wl1251 | |
| * | |
| * Copyright (C) 2009 Nokia Corporation | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include "init.h" | |
| #include "wl12xx_80211.h" | |
| #include "acx.h" | |
| #include "cmd.h" | |
| #include "reg.h" | |
| int wl1251_hw_init_hwenc_config(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_acx_feature_cfg(wl, 0); | |
| if (ret < 0) { | |
| wl1251_warning("couldn't set feature config"); | |
| return ret; | |
| } | |
| ret = wl1251_acx_default_key(wl, wl->default_key); | |
| if (ret < 0) { | |
| wl1251_warning("couldn't set default key"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| int wl1251_hw_init_templates_config(struct wl1251 *wl) | |
| { | |
| int ret; | |
| u8 partial_vbm[PARTIAL_VBM_MAX]; | |
| /* send empty templates for fw memory reservation */ | |
| ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, NULL, | |
| sizeof(struct wl12xx_probe_req_template)); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, NULL, | |
| sizeof(struct wl12xx_null_data_template)); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_cmd_template_set(wl, CMD_PS_POLL, NULL, | |
| sizeof(struct wl12xx_ps_poll_template)); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL, | |
| sizeof | |
| (struct wl12xx_qos_null_data_template)); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, NULL, | |
| sizeof | |
| (struct wl12xx_probe_resp_template)); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_cmd_template_set(wl, CMD_BEACON, NULL, | |
| sizeof | |
| (struct wl12xx_beacon_template)); | |
| if (ret < 0) | |
| return ret; | |
| /* tim templates, first reserve space then allocate an empty one */ | |
| memset(partial_vbm, 0, PARTIAL_VBM_MAX); | |
| ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter) | |
| { | |
| int ret; | |
| ret = wl1251_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_rx_config(wl, config, filter); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_phy_config(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_acx_pd_threshold(wl); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_slot(wl, DEFAULT_SLOT_TIME); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_group_address_tbl(wl, true, NULL, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_service_period_timeout(wl); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_rts_threshold(wl, RTS_THRESHOLD_DEF); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_beacon_filter(struct wl1251 *wl) | |
| { | |
| int ret; | |
| /* disable beacon filtering at this stage */ | |
| ret = wl1251_acx_beacon_filter_opt(wl, false); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_beacon_filter_table(wl); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_pta(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_acx_sg_enable(wl); | |
| if (ret < 0) | |
| return ret; | |
| ret = wl1251_acx_sg_cfg(wl); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_energy_detection(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_acx_cca_threshold(wl); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_acx_bcn_dtim_options(wl); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| int wl1251_hw_init_power_auth(struct wl1251 *wl) | |
| { | |
| return wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM); | |
| } | |
| int wl1251_hw_init_mem_config(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_acx_mem_cfg(wl); | |
| if (ret < 0) | |
| return ret; | |
| wl->target_mem_map = kzalloc_obj(struct wl1251_acx_mem_map); | |
| if (!wl->target_mem_map) { | |
| wl1251_error("couldn't allocate target memory map"); | |
| return -ENOMEM; | |
| } | |
| /* we now ask for the firmware built memory map */ | |
| ret = wl1251_acx_mem_map(wl, wl->target_mem_map, | |
| sizeof(struct wl1251_acx_mem_map)); | |
| if (ret < 0) { | |
| wl1251_error("couldn't retrieve firmware memory map"); | |
| kfree(wl->target_mem_map); | |
| wl->target_mem_map = NULL; | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int wl1251_hw_init_txq_fill(u8 qid, | |
| struct acx_tx_queue_qos_config *config, | |
| u32 num_blocks) | |
| { | |
| config->qid = qid; | |
| switch (qid) { | |
| case QOS_AC_BE: | |
| config->high_threshold = | |
| (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; | |
| config->low_threshold = | |
| (QOS_TX_LOW_BE_DEF * num_blocks) / 100; | |
| break; | |
| case QOS_AC_BK: | |
| config->high_threshold = | |
| (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; | |
| config->low_threshold = | |
| (QOS_TX_LOW_BK_DEF * num_blocks) / 100; | |
| break; | |
| case QOS_AC_VI: | |
| config->high_threshold = | |
| (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; | |
| config->low_threshold = | |
| (QOS_TX_LOW_VI_DEF * num_blocks) / 100; | |
| break; | |
| case QOS_AC_VO: | |
| config->high_threshold = | |
| (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; | |
| config->low_threshold = | |
| (QOS_TX_LOW_VO_DEF * num_blocks) / 100; | |
| break; | |
| default: | |
| wl1251_error("Invalid TX queue id: %d", qid); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl) | |
| { | |
| struct acx_tx_queue_qos_config *config; | |
| struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; | |
| int ret, i; | |
| wl1251_debug(DEBUG_ACX, "acx tx queue config"); | |
| config = kzalloc_obj(*config); | |
| if (!config) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| for (i = 0; i < MAX_NUM_OF_AC; i++) { | |
| ret = wl1251_hw_init_txq_fill(i, config, | |
| wl_mem_map->num_tx_mem_blocks); | |
| if (ret < 0) | |
| goto out; | |
| ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG, | |
| config, sizeof(*config)); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| wl1251_acx_ac_cfg(wl, AC_BE, CWMIN_BE, CWMAX_BE, AIFS_DIFS, TXOP_BE); | |
| wl1251_acx_ac_cfg(wl, AC_BK, CWMIN_BK, CWMAX_BK, AIFS_DIFS, TXOP_BK); | |
| wl1251_acx_ac_cfg(wl, AC_VI, CWMIN_VI, CWMAX_VI, AIFS_DIFS, TXOP_VI); | |
| wl1251_acx_ac_cfg(wl, AC_VO, CWMIN_VO, CWMAX_VO, AIFS_DIFS, TXOP_VO); | |
| out: | |
| kfree(config); | |
| return ret; | |
| } | |
| static int wl1251_hw_init_data_path_config(struct wl1251 *wl) | |
| { | |
| int ret; | |
| /* asking for the data path parameters */ | |
| wl->data_path = kzalloc_obj(struct acx_data_path_params_resp); | |
| if (!wl->data_path) | |
| return -ENOMEM; | |
| ret = wl1251_acx_data_path_params(wl, wl->data_path); | |
| if (ret < 0) { | |
| kfree(wl->data_path); | |
| wl->data_path = NULL; | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| int wl1251_hw_init(struct wl1251 *wl) | |
| { | |
| struct wl1251_acx_mem_map *wl_mem_map; | |
| int ret; | |
| ret = wl1251_hw_init_hwenc_config(wl); | |
| if (ret < 0) | |
| return ret; | |
| /* Template settings */ | |
| ret = wl1251_hw_init_templates_config(wl); | |
| if (ret < 0) | |
| return ret; | |
| /* Default memory configuration */ | |
| ret = wl1251_hw_init_mem_config(wl); | |
| if (ret < 0) | |
| return ret; | |
| /* Default data path configuration */ | |
| ret = wl1251_hw_init_data_path_config(wl); | |
| if (ret < 0) | |
| goto out_free_memmap; | |
| /* RX config */ | |
| ret = wl1251_hw_init_rx_config(wl, | |
| RX_CFG_PROMISCUOUS | RX_CFG_TSF, | |
| RX_FILTER_OPTION_DEF); | |
| /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, | |
| RX_FILTER_OPTION_FILTER_ALL); */ | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* TX queues config */ | |
| ret = wl1251_hw_init_tx_queue_config(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* PHY layer config */ | |
| ret = wl1251_hw_init_phy_config(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Initialize connection monitoring thresholds */ | |
| ret = wl1251_acx_conn_monit_params(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Beacon filtering */ | |
| ret = wl1251_hw_init_beacon_filter(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Bluetooth WLAN coexistence */ | |
| ret = wl1251_hw_init_pta(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Energy detection */ | |
| ret = wl1251_hw_init_energy_detection(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Beacons and broadcast settings */ | |
| ret = wl1251_hw_init_beacon_broadcast(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Enable rx data path */ | |
| ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Enable tx data path */ | |
| ret = wl1251_cmd_data_path_tx(wl, wl->channel, 1); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| /* Default power state */ | |
| ret = wl1251_hw_init_power_auth(wl); | |
| if (ret < 0) | |
| goto out_free_data_path; | |
| wl_mem_map = wl->target_mem_map; | |
| wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", | |
| wl_mem_map->num_tx_mem_blocks, | |
| wl->data_path->tx_control_addr, | |
| wl_mem_map->num_rx_mem_blocks, | |
| wl->data_path->rx_control_addr); | |
| return 0; | |
| out_free_data_path: | |
| kfree(wl->data_path); | |
| out_free_memmap: | |
| kfree(wl->target_mem_map); | |
| return ret; | |
| } |