| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Device probe and register. | |
| * | |
| * Copyright (c) 2017-2020, Silicon Laboratories, Inc. | |
| * Copyright (c) 2010, ST-Ericsson | |
| * Copyright (c) 2008, Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright (c) 2008 Nokia Corporation and/or its subsidiary(-ies). | |
| * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> | |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | |
| * Copyright (c) 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_net.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/mmc/sdio_func.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/firmware.h> | |
| #include "main.h" | |
| #include "wfx.h" | |
| #include "fwio.h" | |
| #include "hwio.h" | |
| #include "bus.h" | |
| #include "bh.h" | |
| #include "sta.h" | |
| #include "key.h" | |
| #include "scan.h" | |
| #include "debug.h" | |
| #include "data_tx.h" | |
| #include "hif_tx_mib.h" | |
| #include "hif_api_cmd.h" | |
| #define WFX_PDS_TLV_TYPE 0x4450 // "PD" (Platform Data) in ascii little-endian | |
| #define WFX_PDS_MAX_CHUNK_SIZE 1500 | |
| MODULE_DESCRIPTION("Silicon Labs 802.11 Wireless LAN driver for WF200"); | |
| MODULE_AUTHOR("Jérôme Pouiller <jerome.pouiller@silabs.com>"); | |
| MODULE_LICENSE("GPL"); | |
| #define RATETAB_ENT(_rate, _rateid, _flags) { \ | |
| .bitrate = (_rate), \ | |
| .hw_value = (_rateid), \ | |
| .flags = (_flags), \ | |
| } | |
| static struct ieee80211_rate wfx_rates[] = { | |
| RATETAB_ENT(10, 0, 0), | |
| RATETAB_ENT(20, 1, IEEE80211_RATE_SHORT_PREAMBLE), | |
| RATETAB_ENT(55, 2, IEEE80211_RATE_SHORT_PREAMBLE), | |
| RATETAB_ENT(110, 3, IEEE80211_RATE_SHORT_PREAMBLE), | |
| RATETAB_ENT(60, 6, 0), | |
| RATETAB_ENT(90, 7, 0), | |
| RATETAB_ENT(120, 8, 0), | |
| RATETAB_ENT(180, 9, 0), | |
| RATETAB_ENT(240, 10, 0), | |
| RATETAB_ENT(360, 11, 0), | |
| RATETAB_ENT(480, 12, 0), | |
| RATETAB_ENT(540, 13, 0), | |
| }; | |
| #define CHAN2G(_channel, _freq, _flags) { \ | |
| .band = NL80211_BAND_2GHZ, \ | |
| .center_freq = (_freq), \ | |
| .hw_value = (_channel), \ | |
| .flags = (_flags), \ | |
| .max_antenna_gain = 0, \ | |
| .max_power = 30, \ | |
| } | |
| static struct ieee80211_channel wfx_2ghz_chantable[] = { | |
| CHAN2G(1, 2412, 0), | |
| CHAN2G(2, 2417, 0), | |
| CHAN2G(3, 2422, 0), | |
| CHAN2G(4, 2427, 0), | |
| CHAN2G(5, 2432, 0), | |
| CHAN2G(6, 2437, 0), | |
| CHAN2G(7, 2442, 0), | |
| CHAN2G(8, 2447, 0), | |
| CHAN2G(9, 2452, 0), | |
| CHAN2G(10, 2457, 0), | |
| CHAN2G(11, 2462, 0), | |
| CHAN2G(12, 2467, 0), | |
| CHAN2G(13, 2472, 0), | |
| CHAN2G(14, 2484, 0), | |
| }; | |
| static const struct ieee80211_supported_band wfx_band_2ghz = { | |
| .channels = wfx_2ghz_chantable, | |
| .n_channels = ARRAY_SIZE(wfx_2ghz_chantable), | |
| .bitrates = wfx_rates, | |
| .n_bitrates = ARRAY_SIZE(wfx_rates), | |
| .ht_cap = { | |
| /* Receive caps */ | |
| .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | | |
| IEEE80211_HT_CAP_MAX_AMSDU | (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), | |
| .ht_supported = 1, | |
| .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, | |
| .ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE, | |
| .mcs = { | |
| .rx_mask = { 0xFF }, /* MCS0 to MCS7 */ | |
| .rx_highest = cpu_to_le16(72), | |
| .tx_params = IEEE80211_HT_MCS_TX_DEFINED, | |
| }, | |
| }, | |
| }; | |
| static const struct ieee80211_iface_limit wdev_iface_limits[] = { | |
| { .max = 1, .types = BIT(NL80211_IFTYPE_STATION) }, | |
| { .max = 1, .types = BIT(NL80211_IFTYPE_AP) }, | |
| }; | |
| static const struct ieee80211_iface_combination wfx_iface_combinations[] = { | |
| { | |
| .num_different_channels = 2, | |
| .max_interfaces = 2, | |
| .limits = wdev_iface_limits, | |
| .n_limits = ARRAY_SIZE(wdev_iface_limits), | |
| } | |
| }; | |
| #ifdef CONFIG_PM | |
| static const struct wiphy_wowlan_support wfx_wowlan_support = { | |
| .flags = WIPHY_WOWLAN_ANY | WIPHY_WOWLAN_DISCONNECT, | |
| }; | |
| #endif | |
| static const struct ieee80211_ops wfx_ops = { | |
| .start = wfx_start, | |
| .stop = wfx_stop, | |
| .add_interface = wfx_add_interface, | |
| .remove_interface = wfx_remove_interface, | |
| .config = wfx_config, | |
| .tx = wfx_tx, | |
| .wake_tx_queue = ieee80211_handle_wake_tx_queue, | |
| .join_ibss = wfx_join_ibss, | |
| .leave_ibss = wfx_leave_ibss, | |
| .conf_tx = wfx_conf_tx, | |
| .hw_scan = wfx_hw_scan, | |
| .cancel_hw_scan = wfx_cancel_hw_scan, | |
| .start_ap = wfx_start_ap, | |
| .stop_ap = wfx_stop_ap, | |
| .sta_add = wfx_sta_add, | |
| .sta_remove = wfx_sta_remove, | |
| .set_tim = wfx_set_tim, | |
| .set_key = wfx_set_key, | |
| .set_rts_threshold = wfx_set_rts_threshold, | |
| .set_default_unicast_key = wfx_set_default_unicast_key, | |
| .bss_info_changed = wfx_bss_info_changed, | |
| .configure_filter = wfx_configure_filter, | |
| .ampdu_action = wfx_ampdu_action, | |
| .flush = wfx_flush, | |
| .add_chanctx = wfx_add_chanctx, | |
| .remove_chanctx = wfx_remove_chanctx, | |
| .change_chanctx = wfx_change_chanctx, | |
| .assign_vif_chanctx = wfx_assign_vif_chanctx, | |
| .unassign_vif_chanctx = wfx_unassign_vif_chanctx, | |
| .remain_on_channel = wfx_remain_on_channel, | |
| .cancel_remain_on_channel = wfx_cancel_remain_on_channel, | |
| #ifdef CONFIG_PM | |
| .suspend = wfx_suspend, | |
| .resume = wfx_resume, | |
| .set_wakeup = wfx_set_wakeup, | |
| #endif | |
| }; | |
| bool wfx_api_older_than(struct wfx_dev *wdev, int major, int minor) | |
| { | |
| if (wdev->hw_caps.api_version_major < major) | |
| return true; | |
| if (wdev->hw_caps.api_version_major > major) | |
| return false; | |
| if (wdev->hw_caps.api_version_minor < minor) | |
| return true; | |
| return false; | |
| } | |
| /* The device needs data about the antenna configuration. This information in provided by PDS | |
| * (Platform Data Set, this is the wording used in WF200 documentation) files. For hardware | |
| * integrators, the full process to create PDS files is described here: | |
| * https://github.com/SiliconLabs/wfx-firmware/blob/master/PDS/README.md | |
| * | |
| * The PDS file is an array of Time-Length-Value structs. | |
| */ | |
| int wfx_send_pds(struct wfx_dev *wdev, u8 *buf, size_t len) | |
| { | |
| int ret, chunk_type, chunk_len, chunk_num = 0; | |
| if (*buf == '{') { | |
| dev_err(wdev->dev, "PDS: malformed file (legacy format?)\n"); | |
| return -EINVAL; | |
| } | |
| while (len > 0) { | |
| chunk_type = get_unaligned_le16(buf + 0); | |
| chunk_len = get_unaligned_le16(buf + 2); | |
| if (chunk_len < 4 || chunk_len > len) { | |
| dev_err(wdev->dev, "PDS:%d: corrupted file\n", chunk_num); | |
| return -EINVAL; | |
| } | |
| if (chunk_type != WFX_PDS_TLV_TYPE) { | |
| dev_info(wdev->dev, "PDS:%d: skip unknown data\n", chunk_num); | |
| goto next; | |
| } | |
| if (chunk_len > WFX_PDS_MAX_CHUNK_SIZE) | |
| dev_warn(wdev->dev, "PDS:%d: unexpectedly large chunk\n", chunk_num); | |
| if (buf[4] != '{' || buf[chunk_len - 1] != '}') | |
| dev_warn(wdev->dev, "PDS:%d: unexpected content\n", chunk_num); | |
| ret = wfx_hif_configuration(wdev, buf + 4, chunk_len - 4); | |
| if (ret > 0) { | |
| dev_err(wdev->dev, "PDS:%d: invalid data (unsupported options?)\n", chunk_num); | |
| return -EINVAL; | |
| } | |
| if (ret == -ETIMEDOUT) { | |
| dev_err(wdev->dev, "PDS:%d: chip didn't reply (corrupted file?)\n", chunk_num); | |
| return ret; | |
| } | |
| if (ret) { | |
| dev_err(wdev->dev, "PDS:%d: chip returned an unknown error\n", chunk_num); | |
| return -EIO; | |
| } | |
| next: | |
| chunk_num++; | |
| len -= chunk_len; | |
| buf += chunk_len; | |
| } | |
| return 0; | |
| } | |
| static int wfx_send_pdata_pds(struct wfx_dev *wdev) | |
| { | |
| int ret = 0; | |
| const struct firmware *pds; | |
| u8 *tmp_buf; | |
| ret = request_firmware(&pds, wdev->pdata.file_pds, wdev->dev); | |
| if (ret) { | |
| dev_err(wdev->dev, "can't load antenna parameters (PDS file %s). The device may be unstable.\n", | |
| wdev->pdata.file_pds); | |
| return ret; | |
| } | |
| tmp_buf = kmemdup(pds->data, pds->size, GFP_KERNEL); | |
| if (!tmp_buf) { | |
| ret = -ENOMEM; | |
| goto release_fw; | |
| } | |
| ret = wfx_send_pds(wdev, tmp_buf, pds->size); | |
| kfree(tmp_buf); | |
| release_fw: | |
| release_firmware(pds); | |
| return ret; | |
| } | |
| static void wfx_free_common(void *data) | |
| { | |
| struct wfx_dev *wdev = data; | |
| mutex_destroy(&wdev->tx_power_loop_info_lock); | |
| mutex_destroy(&wdev->rx_stats_lock); | |
| mutex_destroy(&wdev->scan_lock); | |
| mutex_destroy(&wdev->conf_mutex); | |
| ieee80211_free_hw(wdev->hw); | |
| } | |
| struct wfx_dev *wfx_init_common(struct device *dev, const struct wfx_platform_data *pdata, | |
| const struct wfx_hwbus_ops *hwbus_ops, void *hwbus_priv) | |
| { | |
| struct ieee80211_hw *hw; | |
| struct wfx_dev *wdev; | |
| hw = ieee80211_alloc_hw(sizeof(struct wfx_dev), &wfx_ops); | |
| if (!hw) | |
| return NULL; | |
| SET_IEEE80211_DEV(hw, dev); | |
| ieee80211_hw_set(hw, TX_AMPDU_SETUP_IN_HW); | |
| ieee80211_hw_set(hw, AMPDU_AGGREGATION); | |
| ieee80211_hw_set(hw, CONNECTION_MONITOR); | |
| ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); | |
| ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); | |
| ieee80211_hw_set(hw, SIGNAL_DBM); | |
| ieee80211_hw_set(hw, SUPPORTS_PS); | |
| ieee80211_hw_set(hw, MFP_CAPABLE); | |
| hw->vif_data_size = sizeof(struct wfx_vif); | |
| hw->sta_data_size = sizeof(struct wfx_sta_priv); | |
| hw->queues = 4; | |
| hw->max_rates = 8; | |
| hw->max_rate_tries = 8; | |
| hw->extra_tx_headroom = sizeof(struct wfx_hif_msg) + sizeof(struct wfx_hif_req_tx) + | |
| 4 /* alignment */ + 8 /* TKIP IV */; | |
| hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | | |
| BIT(NL80211_IFTYPE_ADHOC) | | |
| BIT(NL80211_IFTYPE_AP); | |
| hw->wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U; | |
| hw->wiphy->features |= NL80211_FEATURE_AP_SCAN; | |
| #ifdef CONFIG_PM | |
| hw->wiphy->wowlan = &wfx_wowlan_support; | |
| #endif | |
| hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; | |
| hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; | |
| hw->wiphy->max_remain_on_channel_duration = 5000; | |
| hw->wiphy->max_ap_assoc_sta = HIF_LINK_ID_MAX; | |
| hw->wiphy->max_scan_ssids = 2; | |
| hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; | |
| hw->wiphy->n_iface_combinations = ARRAY_SIZE(wfx_iface_combinations); | |
| hw->wiphy->iface_combinations = wfx_iface_combinations; | |
| /* FIXME: also copy wfx_rates and wfx_2ghz_chantable */ | |
| hw->wiphy->bands[NL80211_BAND_2GHZ] = devm_kmemdup(dev, &wfx_band_2ghz, | |
| sizeof(wfx_band_2ghz), GFP_KERNEL); | |
| if (!hw->wiphy->bands[NL80211_BAND_2GHZ]) | |
| goto err; | |
| wdev = hw->priv; | |
| wdev->hw = hw; | |
| wdev->dev = dev; | |
| wdev->hwbus_ops = hwbus_ops; | |
| wdev->hwbus_priv = hwbus_priv; | |
| memcpy(&wdev->pdata, pdata, sizeof(*pdata)); | |
| of_property_read_string(dev->of_node, "silabs,antenna-config-file", &wdev->pdata.file_pds); | |
| wdev->pdata.gpio_wakeup = devm_gpiod_get_optional(dev, "wakeup", GPIOD_OUT_LOW); | |
| if (IS_ERR(wdev->pdata.gpio_wakeup)) | |
| goto err; | |
| if (wdev->pdata.gpio_wakeup) | |
| gpiod_set_consumer_name(wdev->pdata.gpio_wakeup, "wfx wakeup"); | |
| mutex_init(&wdev->conf_mutex); | |
| mutex_init(&wdev->scan_lock); | |
| mutex_init(&wdev->rx_stats_lock); | |
| mutex_init(&wdev->tx_power_loop_info_lock); | |
| init_completion(&wdev->firmware_ready); | |
| INIT_DELAYED_WORK(&wdev->cooling_timeout_work, wfx_cooling_timeout_work); | |
| skb_queue_head_init(&wdev->tx_pending); | |
| init_waitqueue_head(&wdev->tx_dequeue); | |
| wfx_init_hif_cmd(&wdev->hif_cmd); | |
| if (devm_add_action_or_reset(dev, wfx_free_common, wdev)) | |
| return NULL; | |
| return wdev; | |
| err: | |
| ieee80211_free_hw(hw); | |
| return NULL; | |
| } | |
| int wfx_probe(struct wfx_dev *wdev) | |
| { | |
| int i; | |
| int err; | |
| struct gpio_desc *gpio_saved; | |
| /* During first part of boot, gpio_wakeup cannot yet been used. So prevent bh() to touch | |
| * it. | |
| */ | |
| gpio_saved = wdev->pdata.gpio_wakeup; | |
| wdev->pdata.gpio_wakeup = NULL; | |
| wdev->poll_irq = true; | |
| wdev->bh_wq = alloc_workqueue("wfx_bh_wq", WQ_HIGHPRI | WQ_PERCPU, 0); | |
| if (!wdev->bh_wq) | |
| return -ENOMEM; | |
| wfx_bh_register(wdev); | |
| err = wfx_init_device(wdev); | |
| if (err) | |
| goto bh_unregister; | |
| wfx_bh_poll_irq(wdev); | |
| err = wait_for_completion_timeout(&wdev->firmware_ready, 1 * HZ); | |
| if (err == 0) { | |
| dev_err(wdev->dev, "timeout while waiting for startup indication\n"); | |
| err = -ETIMEDOUT; | |
| goto bh_unregister; | |
| } | |
| /* FIXME: fill wiphy::hw_version */ | |
| dev_info(wdev->dev, "started firmware %d.%d.%d \"%s\" (API: %d.%d, keyset: %02X, caps: 0x%.8X)\n", | |
| wdev->hw_caps.firmware_major, wdev->hw_caps.firmware_minor, | |
| wdev->hw_caps.firmware_build, wdev->hw_caps.firmware_label, | |
| wdev->hw_caps.api_version_major, wdev->hw_caps.api_version_minor, | |
| wdev->keyset, wdev->hw_caps.link_mode); | |
| snprintf(wdev->hw->wiphy->fw_version, | |
| sizeof(wdev->hw->wiphy->fw_version), | |
| "%d.%d.%d", | |
| wdev->hw_caps.firmware_major, | |
| wdev->hw_caps.firmware_minor, | |
| wdev->hw_caps.firmware_build); | |
| if (wfx_api_older_than(wdev, 1, 0)) { | |
| dev_err(wdev->dev, "unsupported firmware API version (expect 1 while firmware returns %d)\n", | |
| wdev->hw_caps.api_version_major); | |
| err = -EOPNOTSUPP; | |
| goto bh_unregister; | |
| } | |
| if (wdev->hw_caps.link_mode == SEC_LINK_ENFORCED) { | |
| dev_err(wdev->dev, "chip require secure_link, but can't negotiate it\n"); | |
| goto bh_unregister; | |
| } | |
| if (wdev->hw_caps.region_sel_mode) { | |
| wdev->hw->wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS; | |
| wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[11].flags |= | |
| IEEE80211_CHAN_NO_IR; | |
| wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[12].flags |= | |
| IEEE80211_CHAN_NO_IR; | |
| wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[13].flags |= | |
| IEEE80211_CHAN_DISABLED; | |
| } | |
| dev_dbg(wdev->dev, "sending configuration file %s\n", wdev->pdata.file_pds); | |
| err = wfx_send_pdata_pds(wdev); | |
| if (err < 0 && err != -ENOENT) | |
| goto bh_unregister; | |
| wdev->poll_irq = false; | |
| err = wdev->hwbus_ops->irq_subscribe(wdev->hwbus_priv); | |
| if (err) | |
| goto bh_unregister; | |
| err = wfx_hif_use_multi_tx_conf(wdev, true); | |
| if (err) | |
| dev_err(wdev->dev, "misconfigured IRQ?\n"); | |
| wdev->pdata.gpio_wakeup = gpio_saved; | |
| if (wdev->pdata.gpio_wakeup) { | |
| dev_dbg(wdev->dev, "enable 'quiescent' power mode with wakeup GPIO and PDS file %s\n", | |
| wdev->pdata.file_pds); | |
| gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1); | |
| wfx_control_reg_write(wdev, 0); | |
| wfx_hif_set_operational_mode(wdev, HIF_OP_POWER_MODE_QUIESCENT); | |
| } else { | |
| wfx_hif_set_operational_mode(wdev, HIF_OP_POWER_MODE_DOZE); | |
| } | |
| for (i = 0; i < ARRAY_SIZE(wdev->addresses); i++) { | |
| eth_zero_addr(wdev->addresses[i].addr); | |
| err = of_get_mac_address(wdev->dev->of_node, wdev->addresses[i].addr); | |
| if (!err) | |
| wdev->addresses[i].addr[ETH_ALEN - 1] += i; | |
| else | |
| ether_addr_copy(wdev->addresses[i].addr, wdev->hw_caps.mac_addr[i]); | |
| if (!is_valid_ether_addr(wdev->addresses[i].addr)) { | |
| dev_warn(wdev->dev, "using random MAC address\n"); | |
| eth_random_addr(wdev->addresses[i].addr); | |
| } | |
| dev_info(wdev->dev, "MAC address %d: %pM\n", i, wdev->addresses[i].addr); | |
| } | |
| wdev->hw->wiphy->n_addresses = ARRAY_SIZE(wdev->addresses); | |
| wdev->hw->wiphy->addresses = wdev->addresses; | |
| if (!wfx_api_older_than(wdev, 3, 8)) | |
| wdev->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; | |
| err = ieee80211_register_hw(wdev->hw); | |
| if (err) | |
| goto irq_unsubscribe; | |
| err = wfx_debug_init(wdev); | |
| if (err) | |
| goto ieee80211_unregister; | |
| return 0; | |
| ieee80211_unregister: | |
| ieee80211_unregister_hw(wdev->hw); | |
| irq_unsubscribe: | |
| wdev->hwbus_ops->irq_unsubscribe(wdev->hwbus_priv); | |
| bh_unregister: | |
| wfx_bh_unregister(wdev); | |
| destroy_workqueue(wdev->bh_wq); | |
| return err; | |
| } | |
| void wfx_release(struct wfx_dev *wdev) | |
| { | |
| ieee80211_unregister_hw(wdev->hw); | |
| wfx_hif_shutdown(wdev); | |
| wdev->hwbus_ops->irq_unsubscribe(wdev->hwbus_priv); | |
| wfx_bh_unregister(wdev); | |
| destroy_workqueue(wdev->bh_wq); | |
| } | |
| static int __init wfx_core_init(void) | |
| { | |
| int ret = 0; | |
| if (IS_ENABLED(CONFIG_SPI)) { | |
| ret = spi_register_driver(&wfx_spi_driver); | |
| if (ret) | |
| goto out; | |
| } | |
| if (IS_ENABLED(CONFIG_MMC)) { | |
| ret = sdio_register_driver(&wfx_sdio_driver); | |
| if (ret) | |
| goto unregister_spi; | |
| } | |
| return 0; | |
| unregister_spi: | |
| if (IS_ENABLED(CONFIG_SPI)) | |
| spi_unregister_driver(&wfx_spi_driver); | |
| out: | |
| return ret; | |
| } | |
| module_init(wfx_core_init); | |
| static void __exit wfx_core_exit(void) | |
| { | |
| if (IS_ENABLED(CONFIG_MMC)) | |
| sdio_unregister_driver(&wfx_sdio_driver); | |
| if (IS_ENABLED(CONFIG_SPI)) | |
| spi_unregister_driver(&wfx_spi_driver); | |
| } | |
| module_exit(wfx_core_exit); |